Announcement

Collapse
No announcement yet.

Error = 504.00 0 error: filter name(mpeg_mux), type(128), id(28)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Error = 504.00 0 error: filter name(mpeg_mux), type(128), id(28)

    Hello all.

    When trying to convert Corpse Bride from BluRay to DVD I get this error:
    Work 1 failed, Error = 504.00 0 error: filter name(mpeg_mux), type(128), id(28), get fatal exception: 10:17:54

    Why is that?


    #2
    Download the latest version:



    If make no difference, and if subtitles is unnecessary, unselect all subtitle and try again.

    Comment


      #3
      Originally posted by farewell View Post
      Download the latest version:



      If make no difference, and if subtitles is unnecessary, unselect all subtitle and try again.
      I have the same issue with The Way Back. I tried it with the latest beta and without subtitles and still get the error just about when it is complete. Here is my logs.

      [dvdfab_internal.log]

      DVDFab 8.1.3.5 (2011/12/02 13:29:21)

      0m 00.59s: Qt Translator file load success
      0m 00.99s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1
      0m 07.67s: detected dvd
      0m 07.69s: drive Z
      0m 07.70s: dvd type 1
      0m 07.70s: volume label
      0m 08.15s: failed to report key1: sensekey 05 asc 21 acsq 00
      0m 08.37s: failed to report key1: sensekey 05 asc 21 acsq 00
      0m 08.58s: failed to report key1: sensekey 05 asc 21 acsq 00
      0m 08.78s: got copyright 0 0
      0m 08.79s: got udf/iso
      0m 08.79s: failed to open disc 201
      0m 24.75s: got bdmv
      0m 24.78s: got extended bdinfo
      0m 33.10s:


      ------ begin mobile work(1/1) ------


      0m 33.10s: create config(5)
      0m 33.10s: info: convert profile(DVD_VOB)
      0m 33.10s: info: bluray playlist(0),angle(0),chapter(1->15),3D(0)
      0m 33.10s: info: streams((4113.2)(65535.2))
      0m 33.10s: info: set output video frame_rate(24000/1001)
      0m 33.11s: info: enable multi-thread software decoder
      0m 33.11s: info: processing source(00012.m2ts)
      0m 33.74s: info: processing source(00006.m2ts)
      42m 14.09s: error: filter name(mpeg_mux), type(128), id(28), get fatal exception
      42m 14.20s: ------ mobile work failed(504.00 0 error: filter name(mpeg_mux), type(128), id(28), get fatal exception

      ) ------


      [dvdfab_process.log]

      You are going to try "Blu-ray to DVD" option.: 13:29:54
      Conversion: one pass: 13:29:54
      Source( 00012.m2ts )
      : 13:29:54
      Source( 00006.m2ts )
      : 13:29:55
      Work 1 failed, Error = 504.00 0 error: filter name(mpeg_mux), type(128), id(28), get fatal exception

      : 14:11:35

      Comment


        #4
        Hi gpb68
        Please try the latest version found here http://forum.dvdfab.com/showthread.php?t=15585
        CBR929
        Even if it's a little thing, do something for those who have need of help, something for which you get no pay but the privilege of doing it.


        Setting Up ImgBurn and DVDFab to work together

        Tips for Posting DVDFab Logs in the Forum

        Comment


          #5
          Originally posted by CBR929 View Post
          Hi gpb68
          Please try the latest version found here http://forum.dvdfab.com/showthread.php?t=15585
          CBR929
          failed again..

          here are the logs.

          DVDFab 8.1.3.6 (2011/12/02 14:50:40)

          0m 02.21s: Qt Translator file load success
          0m 03.83s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1
          0m 17.23s: detected dvd
          0m 17.23s: drive Z
          0m 17.23s: dvd type 1
          0m 17.23s: volume label
          0m 18.23s: failed to report key1: sensekey 05 asc 21 acsq 00
          0m 18.43s: failed to report key1: sensekey 05 asc 21 acsq 00
          0m 18.64s: failed to report key1: sensekey 05 asc 21 acsq 00
          0m 18.87s: got copyright 0 0
          0m 18.87s: got udf/iso
          0m 18.87s: failed to open disc 201
          0m 31.02s: got bdmv
          0m 31.12s: got extended bdinfo
          0m 46.22s:


          ------ begin mobile work(1/1) ------


          0m 46.22s: create config(5)
          0m 46.22s: info: convert profile(DVD_VOB)
          0m 46.22s: info: bluray playlist(0),angle(0),chapter(1->15),3D(0)
          0m 46.22s: info: streams((4113.2)(65535.2)(4608.8))
          0m 46.22s: info: set output video frame_rate(24000/1001)
          0m 46.22s: info: subpicture preset(4), mode(1)
          0m 46.34s: info: enable multi-thread software decoder
          0m 46.75s: subpicture(4608) mode(1)
          0m 46.75s: info: processing source(00012.m2ts)
          0m 48.23s: info: processing source(00006.m2ts)
          51m 38.38s: error: filter name(mpeg_mux), type(128), id(28), get fatal exception
          51m 38.52s: ------ mobile work failed(504.00 0 error: filter name(mpeg_mux), type(128), id(28), get fatal exception

          ) ------


          You are going to try "Blu-ray to DVD" option.: 14:51:21
          Conversion: one pass: 14:51:25
          Source( 00012.m2ts )
          : 14:51:25
          Source( 00006.m2ts )
          : 14:51:27
          Work 1 failed, Error = 504.00 0 error: filter name(mpeg_mux), type(128), id(28), get fatal exception

          : 15:42:17

          Comment


            #6
            Any thoughts of what you would like me to try next? I can send you a copy of the main movie I copied from the DVD if that will help.

            Comment


              #7
              Hi gpb68
              Try this, do not convert from your drive.
              First save it to your HDD as BD50 "Movie Only" without compression.
              Then open the hard drive folder and use the folder on your HDD to do your converting.
              Doing it this way saves wear and tear on your optical drive and is also faster.
              CBR929
              Even if it's a little thing, do something for those who have need of help, something for which you get no pay but the privilege of doing it.


              Setting Up ImgBurn and DVDFab to work together

              Tips for Posting DVDFab Logs in the Forum

              Comment


                #8
                I have copied to movie only to HD without compression fine to HD without issues, but when i try to convert the copy on the HD from blueray to DVD i get the same error.

                Comment

                Working...
                X