Announcement

Collapse
No announcement yet.

Blu-ray Ripper Error = graph

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Blu-ray Ripper Error = graph

    ...Sucede que quiero ripear un Blu-Ray (tanto directamente desde el disco de Blu Ray como de una imagen .iso) pero tengo problemas.

    Cuando ripeo un Blu-Ray a (.avi) que es el único formato (por el momento) que se que termina el proceso normalmente con éxito.

    Pero cuando ripeo un Blu-Ray a formatos (.mkv, .mp4, m2ts, etc) en cuanto se inicia el proceso me arroja error (Error = graph)


    Blu-ray Ripper a Formato: avi.divx.ac3



    log:

    108m 01.01s: Work Profile : avi.xvid.ac3
    108m 05.68s: Start check Blu-ray Ripper (3D Plus) register status.
    108m 05.68s: End check Blu-ray Ripper (3D Plus) register status: Enable
    108m 05.70s: OPList at BD Ripper : (4113.2),(4352.2),(4609.8)
    108m 05.70s: Blu-ray ripper (3D Plus) check watermark flag: 0
    108m 05.70s: ------------------ convert work begin(1/1) ------------------
    108m 05.70s: info: create config(bluray2video)
    108m 05.70s: info: use profile(avi.xvid.ac3)
    108m 05.70s: info: bluray playlist(335),angle(0),chapter(1->2),BDAV(no)
    108m 05.70s: info: 3D working_mode(disable), 3D format(sbs_lef_right)
    108m 05.75s: info: input- video stream(4113)[codec(h264) size(1920*1080) fps(24000/1001) interlace(0) opcode(compress)]
    108m 05.76s: info: set output video frame_rate(24000/1001)
    108m 05.76s: info: output video stream(4113)[codec(xvid) size(1920*808) fps(24000/1001) interlace(0)]
    108m 05.76s: info: input- audio stream(4352)[codec(ac3) channels(2) sample(48000) bitrate(224000) bitdepth(0) opcode(compress)]
    108m 05.76s: info: output audio stream(4352)[codec(ac3) channels(2) sample(48000) bitrate(192000) bitdepth(16)]
    108m 05.76s: info: Subtitle Mode(Render) -- Display only forced Subtitle(false)
    108m 05.76s: info: input- subtitle stream(4609)[codec(pgssub) language(Spanish) opcode(render)]
    108m 05.78s: info: enable multi-thread software decoder
    108m 05.78s: set cpu AffMask failed ( mask : 3 )
    108m 07.82s: info: connect to sub render filter success.
    108m 09.87s: info: processing source(01546.m2ts)
    115m 34.76s: info: processing source(01547.m2ts)
    115m 40.23s: info: audio_decode finish job
    115m 43.42s: audio_encode finish job
    118m 39.29s: ------------------ convert work finished ------------------



    Blu-ray Ripper a Formato: mkv.h264.acc



    4m 24.98s: Work Profile : mkv.h264.ac3
    6m 57.17s: Start check Blu-ray Ripper (3D Plus) register status.
    6m 57.17s: End check Blu-ray Ripper (3D Plus) register status: Enable
    6m 57.18s: OPList at BD Ripper : (4113.2),(4352.2),(4609.8)
    6m 57.18s: Blu-ray ripper (3D Plus) check watermark flag: 0
    6m 57.18s: ------------------ convert work begin(1/1) ------------------
    6m 57.18s: info: create config(bluray2video)
    6m 57.20s: info: use profile(mkv.h264.ac3)
    6m 57.20s: info: bluray playlist(335),angle(0),chapter(1->2),BDAV(no)
    6m 57.20s: info: 3D working_mode(disable), 3D format(sbs_lef_right)
    6m 57.34s: info: input- video stream(4113)[codec(h264) size(1920*1080) fps(24000/1001) interlace(0) opcode(compress)]
    6m 57.37s: info: set output video frame_rate(24000/1001)
    6m 57.37s: info: output video stream(4113)[codec(h264) size(1920*808) fps(24000/1001) interlace(0)]
    6m 57.37s: info: input- audio stream(4352)[codec(ac3) channels(2) sample(48000) bitrate(224000) bitdepth(0) opcode(compress)]
    6m 57.37s: info: output audio stream(4352)[codec(ac3) channels(2) sample(48000) bitrate(192000) bitdepth(16)]
    6m 57.37s: info: Subtitle Mode(Render) -- Display only forced Subtitle(false)
    6m 57.37s: info: input- subtitle stream(4609)[codec(pgssub) language(Spanish) opcode(render)]
    6m 57.37s: info: enable multi-thread software decoder
    6m 57.39s: CUDA GPU acceleration for video encoding enabled
    6m 57.39s: info: h264_encode: encode param profile(2) level(41) bitrate(9299)
    6m 57.95s: --- connect filter failed(Module_CudaEncode 1) ---

    6m 57.95s: error: Work 1 failed, Error = graph not_suitable_connected_filter graph(0) - pinName:video frame
    6m 57.95s: ------------------ convert work failed ------------------


    Blu-ray Ripper a Formato: mp4.h264.acc

    37m 17.78s: Work Profile : mp4.h264.ac3
    37m 23.78s: Start check Blu-ray Ripper (3D Plus) register status.
    37m 23.78s: End check Blu-ray Ripper (3D Plus) register status: Enable
    37m 23.81s: OPList at BD Ripper : (4113.2),(4352.2),(4609.32)
    37m 23.84s: Blu-ray ripper (3D Plus) check watermark flag: 0
    37m 24.87s: ------------------ convert work begin(1/1) ------------------
    37m 24.89s: info: create config(bluray2video)
    37m 24.89s: info: use profile(mp4.h264.ac3)
    37m 24.89s: info: bluray playlist(335),angle(0),chapter(1->2),BDAV(no)
    37m 24.89s: info: 3D working_mode(disable), 3D format(sbs_lef_right)
    37m 24.92s: info: input- video stream(4113)[codec(h264) size(1920*1080) fps(24000/1001) interlace(0) opcode(compress)]
    37m 24.96s: info: set output video frame_rate(24000/1001)
    37m 24.96s: info: output video stream(4113)[codec(h264) size(1920*808) fps(24000/1001) interlace(0)]
    37m 24.96s: info: input- audio stream(4352)[codec(ac3) channels(2) sample(48000) bitrate(224000) bitdepth(0) opcode(compress)]
    37m 24.96s: info: output audio stream(4352)[codec(ac3) channels(2) sample(48000) bitrate(192000) bitdepth(16)]
    37m 24.96s: info: Subtitle Mode(Remux) -- Display only forced Subtitle(false)
    37m 24.98s: info: input- subtitle stream(4609)[codec(pgssub) language(Spanish) opcode(remux)]
    37m 25.03s: info: enable multi-thread software decoder
    37m 25.03s: CUDA GPU acceleration for video encoding enabled
    37m 25.06s: info: h264_encode: encode param profile(1) level(40) bitrate(5580)
    37m 26.23s: --- connect filter failed(Module_CudaEncode 1) ---

    37m 26.26s: error: Work 1 failed, Error = graph not_suitable_connected_filter graph(0) - pinName:video frame
    37m 26.26s: ------------------ convert work failed ------------------


    Blu-ray Ripper a Formato: m2ts.ac3.fast

    38m 15.84s: Work Profile : m2ts.ac3.fast
    38m 31.70s: Start check Blu-ray Ripper (3D Plus) register status.
    38m 31.70s: End check Blu-ray Ripper (3D Plus) register status: Enable
    38m 31.76s: OPList at BD Ripper : (4113.2),(4352.2),(4609.32)
    38m 31.76s: Blu-ray ripper (3D Plus) check watermark flag: 0
    38m 31.78s: ------------------ convert work begin(1/1) ------------------
    38m 31.79s: info: create config(bluray2video)
    38m 31.81s: info: use profile(m2ts.ac3.fast)
    38m 31.81s: info: bluray playlist(335),angle(0),chapter(1->2),BDAV(no)
    38m 31.84s: info: 3D working_mode(disable), 3D format(sbs_lef_right)
    38m 31.87s: info: input- video stream(4113)[codec(h264) size(1920*1080) fps(24000/1001) interlace(0) opcode(compress)]
    38m 31.90s: info: set output video frame_rate(24000/1001)
    38m 31.90s: info: output video stream(4113)[codec(h264) size(1920*808) fps(24000/1001) interlace(0)]
    38m 31.90s: info: input- audio stream(4352)[codec(ac3) channels(2) sample(48000) bitrate(224000) bitdepth(0) opcode(compress)]
    38m 31.93s: info: output audio stream(4352)[codec(ac3) channels(2) sample(48000) bitrate(192000) bitdepth(16)]
    38m 31.93s: info: Subtitle Mode(Remux) -- Display only forced Subtitle(false)
    38m 31.93s: info: input- subtitle stream(4609)[codec(pgssub) language(Spanish) opcode(remux)]
    38m 31.93s: info: enable multi-thread software decoder
    38m 31.95s: CUDA GPU acceleration for video encoding enabled
    38m 31.98s: info: h264_encode: encode param profile(2) level(41) bitrate(5580)
    38m 32.37s: --- connect filter failed(Module_CudaEncode 1) ---

    38m 32.37s: error: Work 1 failed, Error = graph not_suitable_connected_filter graph(0) - pinName:video frame
    38m 32.37s: ------------------ convert work failed ------------------



    Blu-ray Ripper a Formato: m2ts.ac3.high_quality

    38m 46.42s: Work Profile : m2ts.ac3.high_quality
    38m 47.92s: Start check Blu-ray Ripper (3D Plus) register status.
    38m 47.92s: End check Blu-ray Ripper (3D Plus) register status: Enable
    38m 47.98s: OPList at BD Ripper : (4113.2),(4352.2),(4609.32)
    38m 47.98s: Blu-ray ripper (3D Plus) check watermark flag: 0
    38m 48.00s: ------------------ convert work begin(1/1) ------------------
    38m 48.00s: info: create config(bluray2video)
    38m 48.00s: info: use profile(m2ts.ac3.high_quality)
    38m 48.00s: info: bluray playlist(335),angle(0),chapter(1->2),BDAV(no)
    38m 48.00s: info: 3D working_mode(disable), 3D format(sbs_lef_right)
    38m 48.01s: info: input- video stream(4113)[codec(h264) size(1920*1080) fps(24000/1001) interlace(0) opcode(compress)]
    38m 48.04s: info: set output video frame_rate(24000/1001)
    38m 48.04s: info: output video stream(4113)[codec(h264) size(1920*808) fps(24000/1001) interlace(0)]
    38m 48.04s: info: input- audio stream(4352)[codec(ac3) channels(2) sample(48000) bitrate(224000) bitdepth(0) opcode(compress)]
    38m 48.04s: info: output audio stream(4352)[codec(ac3) channels(2) sample(48000) bitrate(192000) bitdepth(16)]
    38m 48.04s: info: Subtitle Mode(Remux) -- Display only forced Subtitle(false)
    38m 48.04s: info: input- subtitle stream(4609)[codec(pgssub) language(Spanish) opcode(remux)]
    38m 48.06s: info: enable multi-thread software decoder
    38m 48.06s: CUDA GPU acceleration for video encoding enabled
    38m 48.07s: info: h264_encode: encode param profile(2) level(41) bitrate(5580)
    38m 48.26s: --- connect filter failed(Module_CudaEncode 1) ---

    38m 48.28s: error: Work 1 failed, Error = graph not_suitable_connected_filter graph(0) - pinName:video frame
    38m 48.28s: ------------------ convert work failed ------------------


    Blu-ray Ripper a Formato: m2ts.ac3.normal

    38m 57.89s: Work Profile : m2ts.ac3.normal
    38m 59.12s: Start check Blu-ray Ripper (3D Plus) register status.
    38m 59.14s: End check Blu-ray Ripper (3D Plus) register status: Enable
    38m 59.15s: OPList at BD Ripper : (4113.2),(4352.2),(4609.32)
    38m 59.15s: Blu-ray ripper (3D Plus) check watermark flag: 0
    38m 59.15s: ------------------ convert work begin(1/1) ------------------
    38m 59.15s: info: create config(bluray2video)
    38m 59.15s: info: use profile(m2ts.ac3.normal)
    38m 59.15s: info: bluray playlist(335),angle(0),chapter(1->2),BDAV(no)
    38m 59.15s: info: 3D working_mode(disable), 3D format(sbs_lef_right)
    38m 59.21s: info: input- video stream(4113)[codec(h264) size(1920*1080) fps(24000/1001) interlace(0) opcode(compress)]
    38m 59.21s: info: set output video frame_rate(24000/1001)
    38m 59.21s: info: output video stream(4113)[codec(h264) size(1920*808) fps(24000/1001) interlace(0)]
    38m 59.21s: info: input- audio stream(4352)[codec(ac3) channels(2) sample(48000) bitrate(224000) bitdepth(0) opcode(compress)]
    38m 59.21s: info: output audio stream(4352)[codec(ac3) channels(2) sample(48000) bitrate(192000) bitdepth(16)]
    38m 59.21s: info: Subtitle Mode(Remux) -- Display only forced Subtitle(false)
    38m 59.21s: info: input- subtitle stream(4609)[codec(pgssub) language(Spanish) opcode(remux)]
    38m 59.23s: info: enable multi-thread software decoder
    38m 59.25s: CUDA GPU acceleration for video encoding enabled
    38m 59.26s: info: h264_encode: encode param profile(2) level(41) bitrate(5580)
    38m 59.53s: --- connect filter failed(Module_CudaEncode 1) ---

    38m 59.53s: error: Work 1 failed, Error = graph not_suitable_connected_filter graph(0) - pinName:video frame
    38m 59.53s: ------------------ convert work failed ------------------

    #2
    Perdone por el retraso en responder su problema, y por favor actualice su software para probar. Si todavía hay el mismo problema, no dude en contactarnos por favor.

    Comment

    Working...
    X