task_2 failed! Error=123

[ef9]

Hello,

I get this error message when I try to copy a DVD (home movies) that I made in the past.

The DVD is not full (I only filled up half the DVD with video).

I am running DVDFab 8.0.5.0 (18/11/2010).

Can anyone help? I get the error message task_2 failed! Error=123 very near the end of the burn process.

Stan

[maineman]

Why use Fab?
The dvds are not encrypted and probably are not structurally compliant with dvd standards.
Suggest you just burn a new disc with Img.

Anyway, the disc did not finalize properly, ie., the session was not closed.
You'll need to force finalization with VSO, Img or a utlitiy such as nero cd-dvd speed.

For VSO:

Right click on the Fab Icon >
Left click Properties >
Left click Find Target >
Left click PcSetup.exe >
Left click on the + in front of Patin-Couffin driver >
Now left click once to select your burner >
Right click on the selected burner >
Navigate to the bottom of the dropdown to Finalize the media

It looks complicated, but will take less than a minute.

For Img or nero, just select finalze from the dropdowns.

If you're having problems with the blank media in general, perhaps a firmware update will resolve this.
For more specific help, please post the burn log.

The default location is:

For Win7
C:\Users\User Name\My Documents\DVDFab\Log
or for XP
C:\Documents and Settings\User Name\My Documents\DVDFab\Log

[ef9]

I tried to burn the movie "Selena" using the DVDFab 8.0.5.0 and got this error message:

Task_2 failed! Error=122

It only got 1.53% the way through.

Is there a way I can do a "test burn" without actually burning the DVD-R? I don't feel like wasting this many blanks (I already went through 4 blanks).

Stan

[Anny]

I tried to burn the movie "Selena" using the DVDFab 8.0.5.0 and got this error message:

Task_2 failed! Error=122

It only got 1.53% the way through.

Is there a way I can do a "test burn" without actually burning the DVD-R? I don't feel like wasting this many blanks (I already went through 4 blanks).

Stan

Hi ef9,

1) Please understand that this error (Task_2 failed! Error=122) may be caused by compatibility problems--the blank media is poorly supported by your DVD drive.

2) From my point of view, there is no way to do a "test burn" without actually burning the DVD disc.

My suggestion is to try using a variety of different brands/speeds media. Well-known brands like Taiyo Yuden and Verbatim will be better. Please keep away of Memorex media, some of which are of poor quality. Try different format media like DVD+/-R/RW if your DVD writer supports.

Best regards,
Anny
DVDFab Support Team

[maineman]

You've posted two entirely different problems and never returned to the first one.
Please stick with one issue per post.
Does this mean your first problem has been resolved???

As I said,

For more specific help, please post the burn log.

The default location is:

For Win7
C:\Users\User Name\My Documents\DVDFab\Log
or for XP
C:\Documents and Settings\User Name\My Documents\DVDFab\Log

Is there a way I can do a "test burn" without actually burning the DVD-R? I don't feel like wasting this many blanks (I already went through 4 blanks).

Stan

As Anny said, this is probably a media problem, most likely poor quality, maybe poor firmware support, inappropriate burn speed, etc., etc...

It's all guesswork without the logs.

[ef9]

Both problems have not been fixed. I am too afraid to burn more, as I am wasting DVD-R media.

My old computer never gave me problems, now that I have a new one, I'm not sure what is wrong.

Is DVD Fab compatible with 64 bit Vista? That is the only thing different between the new and old.

[ef9]

21:31:46: Analyzing of DVD started
21:31:54: Analyzing of DVD completed successfully
21:31:54: Copy process started
21:42:11: Copy process completed successfully
21:42:11: Burn DVD folder (C:\Users\Stanward Oshiro\Documents\DVDFab\Temp\FullDisc\SELENA_4X3\) started
21:45:59: Task_2 failed! Error=122

[ef9]

dvdfab_burn_vso

2010-12-01 22:45:04 ---- ******************** Log session stop 01-Dec 22:45:04.890 PID 3612********************
2010-12-01 22:44:52 Info Disc ejected by user while parsing.
2010-12-01 22:44:42 Info Parsing disc ...
2010-12-01 22:44:36 Info Disc ejected by user while parsing.
2010-12-01 22:44:26 Info Parsing disc ...
2010-12-01 22:37:33 Info Disc (DVD-ROM) not emtpy.
2010-12-01 22:37:30 Info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVDRAM, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R
2010-12-01 22:37:30 Info Drive has IDE-ATAPI physical interface
2010-12-01 22:37:30 Info New Drive selected : 1:0:0 - PIONEER DVR-113NP 1.00 [E] (Ide)
2010-12-01 22:36:15 Info Current Drive selected : 1:0:0 - PIONEER DVR-113NP 1.00 [E] (Ide)
2010-12-01 22:36:15 Info Using Advanced SPTI interface
2010-12-01 22:36:15 Info System default language : English (United States)
2010-12-01 22:36:15 Info User default language : English (United States)
2010-12-01 22:36:15 Info DLL Version : 4.0.11.473
2010-12-01 22:36:15 Info DLL : C:\Program Files (x86)\DVDFab 8\vso_hwe.dll
2010-12-01 22:36:15 Info Version : 8, 0, 5, 0
2010-12-01 22:36:15 Info ExeName : C:\Program Files (x86)\DVDFab 8\DVDFab.exe
2010-12-01 22:36:15 Info OS : Microsoft Windows Vista Home Premium (Build 6002: Service Pack 2)
2010-12-01 22:36:15 ---- ******************** Log session start 01-Dec 22:36:15.384 PID 3612********************


2010-12-01 21:52:37 ---- ******************** Log session stop 01-Dec 21:52:37.467 PID 1984********************
2010-12-01 21:50:49 Info Parsing disc ...
2010-12-01 21:46:13 Info Disc ejected by user while parsing.
2010-12-01 21:46:07 Info Parsing disc ...
2010-12-01 21:45:55 Error WRITE FAILED: Can't find write strategy at sector 33696
2010-12-01 21:45:54 Error Write error at 33680 (16) - Code 05 21 00 [Illegal request, LBA out of range]
2010-12-01 21:42:50 Info Lead-in burning time (mS) 35058
2010-12-01 21:42:15 Info Write started 2202192 sectors to write
2010-12-01 21:42:15 Info Init success: DVD-R SAO
2010-12-01 21:42:15 Info Writing speed requested x8.0, effective x8.0
2010-12-01 21:42:13 Info Available write speed: 16x ,12x ,10x ,8x ,4x
2010-12-01 21:42:13 Info Media ID: CMC MAG. AM3
2010-12-01 21:42:13 Info Media type: DVD-R
2010-12-01 21:42:13 Info Ultra DMA mode 4 (ATA66)
2010-12-01 21:42:12 Info Scanned files #10, folder #2 - total size 4508962816 b. (4.2 Gb.)
2010-12-01 21:42:12 Info Inserted media type : DVD-R
2010-12-01 21:42:12 Info Write started
2010-12-01 21:31:45 Info Writable disc DVD-R inserted. Ready to write
2010-12-01 21:28:26 Info Parsing disc ...
2010-12-01 21:28:20 Info No disc in drive.
2010-12-01 21:28:18 Info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVDRAM, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R
2010-12-01 21:28:18 Info Drive has IDE-ATAPI physical interface
2010-12-01 21:28:18 Info New Drive selected : 1:0:0 - PIONEER DVR-113NP 1.00 [E] (Ide)
2010-12-01 21:27:41 Info Current Drive selected : 1:0:0 - PIONEER DVR-113NP 1.00 [E] (Ide)
2010-12-01 21:27:41 Info Using Advanced SPTI interface
2010-12-01 21:27:41 Info System default language : English (United States)
2010-12-01 21:27:41 Info User default language : English (United States)
2010-12-01 21:27:41 Info DLL Version : 4.0.11.473
2010-12-01 21:27:41 Info DLL : C:\Program Files (x86)\DVDFab 8\vso_hwe.dll
2010-12-01 21:27:41 Info Version : 8, 0, 5, 0
2010-12-01 21:27:41 Info ExeName : C:\Program Files (x86)\DVDFab 8\DVDFab.exe
2010-12-01 21:27:41 Info OS : Microsoft Windows Vista Home Premium (Build 6002: Service Pack 2)
2010-12-01 21:27:41 ---- ******************** Log session start 01-Dec 21:27:41.592 PID 1984********************


2010-12-01 09:14:23 ---- ******************** Log session stop 01-Dec 09:14:23.750 PID 2460********************
2010-12-01 09:14:18 Info Disc ejected by user while parsing.
2010-12-01 09:14:12 Info Parsing disc ...
2010-12-01 09:04:42 Error WRITE FAILED: write error occured at 24.0 percent of the write
2010-12-01 09:04:41 Error Write error at 164352 (16) - Code 05 21 00 [Illegal request, LBA out of range]
2010-12-01 08:58:51 Info Lead-in burning time (mS) 25887
2010-12-01 08:58:25 Info Write started 684352 sectors to write
2010-12-01 08:58:25 Info Init success: DVD-R SAO
2010-12-01 08:58:25 Info Writing speed requested x8.0, effective x8.0
2010-12-01 08:58:25 Info Available write speed: 16x ,12x ,10x ,8x ,4x
2010-12-01 08:58:25 Info Media ID: CMC MAG. AM3
2010-12-01 08:58:25 Info Media type: DVD-R
2010-12-01 08:58:25 Info Ultra DMA mode 4 (ATA66)
2010-12-01 08:58:25 Info Scanned files #36, folder #2 - total size 1400389632 b. (1.3 Gb.)
2010-12-01 08:58:25 Info Inserted media type : DVD-R
2010-12-01 08:58:25 Info Write started
2010-12-01 08:54:23 Info Writable disc DVD-R inserted. Ready to write
2010-12-01 08:52:53 Info Parsing disc ...
2010-12-01 08:52:37 Info No disc in drive.
2010-12-01 08:52:35 Info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVDRAM, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R
2010-12-01 08:52:35 Info Drive has IDE-ATAPI physical interface
2010-12-01 08:52:35 Info New Drive selected : 1:0:0 - PIONEER DVR-113NP 1.00 [E] (Ide)
2010-12-01 08:52:16 Info Current Drive selected : 1:0:0 - PIONEER DVR-113NP 1.00 [E] (Ide)
2010-12-01 08:52:16 Info Using Advanced SPTI interface
2010-12-01 08:52:16 Info System default language : English (United States)
2010-12-01 08:52:16 Info User default language : English (United States)
2010-12-01 08:52:16 Info DLL Version : 4.0.11.473
2010-12-01 08:52:16 Info DLL : C:\Program Files (x86)\DVDFab 8\vso_hwe.dll
2010-12-01 08:52:16 Info Version : 8, 0, 5, 0
2010-12-01 08:52:16 Info ExeName : C:\Program Files (x86)\DVDFab 8\DVDFab.exe
2010-12-01 08:52:16 Info OS : Microsoft Windows Vista Home Premium (Build 6002: Service Pack 2)
2010-12-01 08:52:16 ---- ******************** Log session start 01-Dec 08:52:16.297 PID 2460********************


2010-12-01 08:52:05 ---- ******************** Log session stop 01-Dec 08:52:05.263 PID 4344********************
2010-12-01 08:48:07 Info Disc ejected by user while parsing.
2010-12-01 08:48:03 Info Parsing disc ...
2010-12-01 08:47:39 Error WRITE FAILED: write error occured near the end at sector 557680 / 684352
2010-12-01 08:47:38 Error Write error at 557664 (16) - Code 05 21 00 [Illegal request, LBA out of range]
2010-12-01 08:39:51 Info Lead-in burning time (mS) 19827
2010-12-01 08:39:31 Info Write started 684352 sectors to write
2010-12-01 08:39:31 Info Init success: DVD-R SAO
2010-12-01 08:39:31 Info Writing speed requested x8.0, effective x8.0
2010-12-01 08:39:30 Info Available write speed: 16x ,12x ,10x ,8x ,4x
2010-12-01 08:39:30 Info Media ID: CMC MAG. AM3
2010-12-01 08:39:30 Info Media type: DVD-R
2010-12-01 08:39:30 Info Ultra DMA mode 4 (ATA66)
2010-12-01 08:39:30 Info Scanned files #36, folder #2 - total size 1400389632 b. (1.3 Gb.)
2010-12-01 08:39:30 Info Inserted media type : DVD-R
2010-12-01 08:39:30 Info Write started
2010-12-01 08:39:28 Info Writable disc DVD-R inserted. Ready to write
2010-12-01 08:37:40 Info Parsing disc ...
2010-12-01 08:36:34 Error WRITE FAILED: write error occured at 77.2 percent of the write
2010-12-01 08:36:33 Error Write error at 528080 (16) - Code 05 21 00 [Illegal request, LBA out of range]
2010-12-01 08:29:34 Info Lead-in burning time (mS) 22351
2010-12-01 08:29:12 Info Write started 684352 sectors to write
2010-12-01 08:29:12 Info Init success: DVD-R SAO
2010-12-01 08:29:12 Info Writing speed requested x8.0, effective x8.0
2010-12-01 08:29:12 Info Available write speed: 16x ,12x ,10x ,8x ,4x
2010-12-01 08:29:12 Info Media ID: CMC MAG. AM3
2010-12-01 08:29:12 Info Media type: DVD-R
2010-12-01 08:29:11 Info Ultra DMA mode 4 (ATA66)
2010-12-01 08:29:11 Info Scanned files #36, folder #2 - total size 1400389632 b. (1.3 Gb.)
2010-12-01 08:29:11 Info Inserted media type : DVD-R
2010-12-01 08:29:11 Info Write started
2010-12-01 08:25:13 Info Writable disc DVD-R inserted. Ready to write
2010-12-01 08:23:39 Info Parsing disc ...
2010-12-01 08:23:21 Info No disc in drive.
2010-12-01 08:23:19 Info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVDRAM, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R
2010-12-01 08:23:19 Info Drive has IDE-ATAPI physical interface
2010-12-01 08:23:19 Info New Drive selected : 1:0:0 - PIONEER DVR-113NP 1.00 [E] (Ide)
2010-12-01 08:23:00 Info Current Drive selected : 1:0:0 - PIONEER DVR-113NP 1.00 [E] (Ide)
2010-12-01 08:23:00 Info Using Advanced SPTI interface
2010-12-01 08:23:00 Info System default language : English (United States)
2010-12-01 08:23:00 Info User default language : English (United States)
2010-12-01 08:23:00 Info DLL Version : 4.0.11.473
2010-12-01 08:23:00 Info DLL : C:\Program Files (x86)\DVDFab 8\vso_hwe.dll
2010-12-01 08:23:00 Info Version : 8, 0, 5, 0
2010-12-01 08:23:00 Info ExeName : C:\Program Files (x86)\DVDFab 8\DVDFab.exe
2010-12-01 08:23:00 Info OS : Microsoft Windows Vista Home Premium (Build 6002: Service Pack 2)
2010-12-01 08:23:00 ---- ******************** Log session start 01-Dec 08:23:00.312 PID 4344********************

[Anny]

Both problems have not been fixed. I am too afraid to burn more, as I am wasting DVD-R media.

My old computer never gave me problems, now that I have a new one, I'm not sure what is wrong.

Is DVD Fab compatible with 64 bit Vista? That is the only thing different between the new and old.

Hi ef9,

1) Please understand that the current DVDFab products can work on
Windows 7/Vista/XP(32-bit/64-bit).

2) The difference between windows xp and windows vista is that you need to login your computer as administrator to install and register DVDFab on vista.

Best regards,
Anny
DVDFab Support Team

[ef9]

My user id in Vista, has admin privileges.

I don't think I have to actually login as the administrator to the PC right?

Hi ef9,

1) Please understand that the current DVDFab products can work on
Windows 7/Vista/XP(32-bit/64-bit).

2) The difference between windows xp and windows vista is that you need to login your computer as administrator to install and register DVDFab on vista.

Best regards,
Anny
DVDFab Support Team

[Anny]

task2 122

Hi ef9,

Please try the following steps to see if the problem can be fixed:

1) Upgrade to the latest version of DVDFab 8.0.5.6 at http://www.dvdfab.com/download.htm;

2) Check your writer manufacturers site for a list of recommended media to use and also check if there are any firmware updates available for your Writer;

3) Please click the round green icon button with a check mark at the right top corner of the DVDFab screen, open "Common Settings" window, click on "write", slow down the burning speed (such as 4.x).

Best regards,
Anny
DVDFab Support Team

[CBR929]

Hi ef9

The media you are using is considered some of the worst garbage out there, and your drive knows it and doesn't like them Sorry

122 HWS_FAILED_CALIBRATING 22 // Write failed at the beginning of the media (often a media that is poorly supported by the drive)

Consider picking up some Taiyo Yuden or Verbatim "with the AZO dye" on the label for your burning.

Also if you want to try and salvage the disc's you have I think the only way to do this is with ImgBurn...it is "free" ....you will find it here along with a tutorial on setting it up with Fab http://forum.dvdfab.com/showthread.php?t=33 remember to set up AWS in ImgBurn

As Anny suggested your drive does have a firmware update you will find it here http://www.firmwarehq.com/download_1..._X152.zip.html
NOTE: If you do not know how to flash your drive do not do it, it will render your drive useless.
Give this a try and post back
CBR929