fulldisc bluray copy of avatar 3d (50gb->50gb) fails:

fixel

Both file and iso mode fails with Error 102 on 88888.jar. the file is easily copyable under windows and far2. The disc is spotless clean.
here is the log:


02:53:18: You are going to try "Blu-ray Copy" option.
02:53:18: Analyzing started
02:53:18: Analyzing completed successfully
02:53:18: Copy process started
03:06:05: Copy 88888.jar failed
03:06:05: Task_1 failed! Error=102
03:06:06: Process failed!

here is the internal log :


DVDFab 8.0.6.6 (2010/12/31  09:09:12)

 0m 00.71s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1
 0m 04.34s: detected blu-ray
 0m 04.34s: drive D
 0m 04.34s: blu-ray type 1
 0m 04.34s: volume label RED_BIRD_3D_WW
 0m 12.28s: root 3D21BC50RED_BIRD:RED_BIRD_3D_WW:RED_BIRD_3D_WW:RED_BIRD_3D_WW
 0m 14.73s: aacs 1 bd+ 1
 0m 20.25s: got discinfo
 0m 20.40s: got bdmv
 0m 20.40s: got agid 3
 0m 20.48s: sent host cert chal
 0m 20.48s: got drive cert chal
 0m 20.56s: got drive key
 0m 20.56s: got host key signature
 0m 20.56s: verified drive signature
 0m 20.56s: verified host signature
 0m 20.67s: sent host signature and key point
 0m 20.67s: got bus key
 0m 20.67s: got volume id
 0m 20.67s: got volume id mac
 0m 20.67s: volume id is correct
 0m 20.67s: got vid
 0m 20.71s: blu-ray 0DBF391099FF62A2370E6807DDA70D4DAC1DC6C1
 0m 21.35s: D A22BFEF9
 0m 26.92s: got vuk
 0m 26.92s: got fut
 0m 27.46s: got unit key 7
 0m 37.26s: got extended bdinfo
 0m 37.26s: opened blu-ray
 1m 03.64s: Blu-ray Copy: Full Disc
 1m 03.64s: Source: D:\BDMV\
 1m 03.64s: SourceSize: 47374 MB
 1m 03.64s: RemoveHDAudio: 0
 1m 03.64s: OutputTarget: BD50
 1m 03.64s: OutputVideo: 1080p/i

fab_admin

Is this the version of avatar that is gen9?

@fengtao: in your list of bd+ gens (sticky) you dont mention gen9...what did the protectors do in gen9 or do we not know yet? thx

stumblinh

don't copy that way... with 3d movies you need to

1) make a clone (drop iso to hdd) when complete close up dvdfab
2) open imgburn (it's free) and burn the iso (make sure to setup your disc speeds)

This method makes flawless 3d backups.

fengtao

Yes, for Blu-ray 3D disc, you need use "Clone" to make a backup.

crabcakes

I have the same issue as the OP and am not using the 3D blu-ray for avatar.

Process Log
11:46:28: You are going to try "Blu-ray Copy" option.
11:46:28: Analyzing started
11:46:28: Analyzing completed successfully
11:46:28: Copy process started
12:21:10: Copy 88888.jar failed
12:21:10: Task_1 failed! Error=102

Internal Log
DVDFab 8.0.6.6 (2011/01/01 11:41:16)

0m 00.18s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1
1m 06.86s: detected blu-ray
1m 06.86s: drive F
1m 06.86s: blu-ray type 1
1m 06.86s: volume label RED_BIRD_2D_WW
1m 17.45s: root 3C6B6042RED_BIRD:RED_BIRD_2D_WW:RED_BIRD_2D_WW:RED_BIRD_2D_WW
1m 19.66s: aacs 1 bd+ 1
1m 25.95s: got discinfo
1m 26.26s: got bdmv
1m 26.28s: got agid 0
1m 26.36s: sent host cert chal
1m 26.37s: got drive cert chal
1m 26.44s: got drive key
1m 26.44s: got host key signature
1m 26.44s: verified drive signature
1m 26.44s: verified host signature
1m 26.50s: sent host signature and key point
1m 26.50s: got bus key
1m 26.84s: got volume id
1m 26.84s: got volume id mac
1m 26.84s: volume id is correct
1m 26.84s: got vid
1m 26.95s: blu-ray 6C3EBCFBEA0D7827C68E98B89600603C379A1115
1m 27.48s: D 5220BA66
1m 31.55s: got vuk
1m 31.55s: got fut
1m 31.71s: got unit key 7
1m 41.32s: got extended bdinfo
1m 41.32s: opened blu-ray
5m 11.92s: Blu-ray Copy: Full Disc
5m 11.92s: Source: F:\BDMV\
5m 11.92s: SourceSize: 44037 MB
5m 11.92s: RemoveHDAudio: 0
5m 11.92s: OutputTarget: BD50
5m 11.92s: OutputVideo: 1080p/i

Operating system is W7 Pro.

fixel

[QUOTE=crabcakes;70602]I have the same issue as the OP and am not using the 3D blu-ray for avatar.
[/QUOTE]

I can confirm that. I have the same issue with avatar 2d. same 88888.jar fails. However if clone works fine, that is if you want to use BDR DL.

SuperFist

Geez, those 50GB BD-R DL discs make for some pretty expensive coasters.

crabcakes

I can back up the main movie successfully, just not the full disc (Avatar 2D).

stumblinh

[QUOTE=SuperFist;70622]Geez, those 50GB BD-R DL discs make for some pretty expensive coasters.[/QUOTE]

NEVER burn direct to disc w/ a 50gb bd-r DL unless your crazy! Burn to iso on HDD, then you can even mount the iso to verify the burn (dvdfab virtual drive) then burn on the 50gb disc. At $5~6 a disc take the extra steps :)

crabcakes

Simply amazing that two of the posts about coasters is so unhelpful:rolleyes:. I tried to copy the full Avatar disk from a Pio BDR-206 (dirve F:) to a 2TB hard drive without compressing it down to 25GB (ie. 50GB). There were no coasters produced with this step.

I would rather put the wear and tear of the compression on my hard drive than working the blu-ray drive over. Yes this means an extra step to compress the 50GB movie but I never got that far due to the failure.

I must say that [program] could rip the full disc to the HD and BD-Rebuilder handled the full disk compression to 25GB without the failure experienced with DVDfab blu-ray copy. Imageburn was also able to burn the compressed file to a 25GB disc and it play very well in my Pio bdp-320.

I would very much like to buy and continue using DVDfab Blu-ray copy since it is an all in one software package. If DVDfab can't make a backup of Avatar 2D using the full disc copy then I guess it's time to use the freebies along with anydvdhd (I already have a lifetime anydvdhd license) to rip the disc.

fixel

More and more discs are failing with the same file! 88888.jar. I suggest to rename the topic to "Full disc bluray copy failed with error 102 on file 88888.jar"
Among the ones i've tried :
Avatar 2D
Avatar 3D
Coraline Collectors edition
Goldmember

fengtao

It's a bug of DVDFab v8066, please try DVDFab v8067 to see the result:

Sorry for that.