Have tried several times with 3 different optical drives and it says there is a READ ERROR on the DVD. Has anyone been able to back it up. I was able to buy mine early here and wanted to use my back up for my grandchildren. I own the paid version of DVD FAB.

Sounds like new protection, but you should always post the internal log file when you have trouble with a new disc. You may have to wait for a fix until it is more widely available.

I have already sent the files to dvdfab about the new protection i even said their might be new protection so hopefully we will get it soon. I sent my info logs to them but didn't get a reply hopefully they can analyze mine

I'm sure it will help and that they appreciate it. I hope they can get this one quickly too, there will be lots of interest in it here in the forum.

Breaking dawn_part 1 Good Morning. I since have tried it & when it said there was a read error I hit abort a couple of times & it came right up. I ripped it and burned it with Imgburn & it seems to work fine. I spot played it with TMT5, checking every so often & it seemed to be OK. I'll know better when my grandson comes over in the next couple of days & plays it through. I managed to read it with my Pioneer BDR-206 optical drive.

Here is the result I had with this movie, I cleaned the disk and preview the movie to see the chapter that played, chapter 10 in R1, using v 8.1.6.1QT Movie only, Had read errors 2 times and hit Abort, each time and the last time it came up showing chapter 17, I selected chapter 10 and backed it up, and it seem to play fine, Hope this helps some of the ones that are able to do it

ok it works for me i want to customixze an it works to good job:D:eek:

While reading, it abord, When to Customize and chose chapter 10 with chapters 2-1 and 4 which I like to have the logo...lol... so far it works...

The Twilight Saga: Breaking Dawn Could't copy it too

No luck with this movie for me either. I guess I'll hang tight until the fix comes along.

[QUOTE=Mr Fixit;110021]Here is the result I had with this movie, I cleaned the disk and preview the movie to see the chapter that played, chapter 10 in R1, using v 8.1.6.1QT Movie only, Had read errors 2 times and hit Abort, each time and the last time it came up showing chapter 17, I selected chapter 10 and backed it up, and it seem to play fine, Hope this helps some of the ones that are able to do it[/QUOTE] This worked perfectly for me as well. At least I have a backup for the kids to watch until a fix comes out and I can back up the whole DVD. Thanks Mr Fixit!

Won't READ Twilight Saga -Breaking Dawn-Part 1

chris

[QUOTE=fengtao;110104]The new DVDFab8163Qt.exe file size is 20,349,392 bytes, please check it.[/QUOTE]

19.4 MB (20,349,392 bytes) Yes it is, however the time stamp for new version is showing 11:49am.

fengtao

Could you please upload "Info Files" with PathPlayer disabled? Thanks.

chris

[QUOTE=fengtao;110107]Could you please upload "Info Files" with PathPlayer disabled? Thanks.[/QUOTE]

Here you go:

Info for drive [F:\] (DVDFab 8.1.6.3)
Vendor: HP
Product: DVD Writer 1270d
Revision: GH24
Vendor specific: 2009/09/21 10:26
Drive region control: RPC II
Drive region: 1
User changes left: 4
Vendor resets left: 4

Disc media: DVD
Disc type: DVD-Video
Disc region: 1
Volume name: BREAKING_DAWN_PART_1
Video standard: NTSC
Layer 0 size: 2084960 sectors (4072 MBytes)
Layer 1 size: 2084960 sectors (4072 MBytes)

CSS (Content Scramble System) protection is removed!
RC (Region Code) protection is removed!
RCE (Region Code Enhancement) protection is not found.
APS (Analog Protection System) protection is not found.
UOPs (User Operation Prohibitions) protection is removed!

Invalid PTTs protection is not found.
Invalid PGCIs protection is not found.
Invalid PGCs protection is not found.
Invalid TMAPs protection is not found.
Invalid CELLs protection is removed!
Invalid VOBUs protection is not found.
Fake vts protection is not found!
Potential bad sector (vts:7 title begin:0 end:69) is removed!
1 potential bad sector protections are removed!
Structure protection (ARccOS, RipGuard, etc.) is removed!

PathPlayer is disabled.

fengtao

I mean zip the complete log folder, sorry.

october262

twilight saga -breaking dawn - part 1

the re download of v8.1.6.3 Qt opens Twilight Saga -Breaking Dawn-Part 1
no read errors dvd copied succesfuly - - THANK YOU!!!:D

chris

[QUOTE=fengtao;110113]I mean zip the complete log folder, sorry.[/QUOTE]

DVDFab 8.1.6.3 (2012/02/11 21:13:07)

0m 01.04s: Qt Translator file load success
0m 01.09s: Load config successful.
0m 01.09s: Init profile data driver sucessful.
0m 03.51s: Init GPU settings sucessful.
0m 03.51s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 03.52s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 03.74s: Config ExBar successful.
0m 03.74s: dvd2dvd have 4 elements.
0m 03.85s: dvd2mobile have 11 elements.
0m 04.16s: blu-ray2blu-ray have 4 elements.
0m 04.19s: blu-ray2mobile have 18 elements.
0m 04.71s: blu-ray23d have 8 elements.
0m 04.91s: blu-ray2dvd have 1 elements.
0m 04.94s: file2mobile have 13 elements.
0m 05.35s: file2dvd have 1 elements.
0m 05.36s: file2bluray have 1 elements.
0m 05.99s: Config work ui controls successful.
0m 11.84s: Init burn engine successful.
0m 11.91s: StartNotify successful.
0m 13.39s: detected dvd
0m 13.43s: drive F
0m 13.43s: dvd type 1
0m 13.43s: volume label BREAKING_DAWN_PART_1
0m 13.53s: got copyright 1 fe
0m 14.01s: got udf/iso
0m 15.74s: got discinfo
0m 15.81s: pathplayer disabled 0
0m 17.38s: got dvdinfo
0m 17.38s: opened dvd

I hope this is what your talking about...My appologies if it is not.

fengtao

Hi chris,

It's ok, please follow the steps below:
1) Open Settings window, and click "Save Info Files" button.
2) Open log folder, create a zip file which contains Disc.BIN file and VIDEO_TS folder.
3) Upload the zip file to forum.

Thanks.

Best Regards,
Fengtao

chris

[QUOTE=fengtao;110116]Hi chris,

It's ok, please follow the steps below:
1) Open Settings window, and click "Save Info Files" button.
2) Open log folder, create a zip file which contains Disc.BIN file and VIDEO_TS folder.
3) Upload the zip file to forum.

Thanks.

Best Regards,
Fengtao[/QUOTE]

Hope this worked?

signals

All known versions should be supported with the updated installer for v8.1.6.3, please try it and report the results.

fengtao

Hi chris,

Please wait for a while, the support for Canada version will be added soon.

Thanks.

Best Regards,
Fengtao

mike_r

i just downloaded the new version of 8163 and all it does is read and error out. i went in and disabled pathfinder and it read 5% and quit.....

fengtao

Hi chris,

Please re-download v8163 to see the result.

Best Regards,
Fengtao

kshduckman1170

Worked

I did not add anything to the original post since everyone was having the same issue.

I just re-downloaded 8163 after it did not work earlier, this time it did read and back up Twilight. It was fairly quick and painless this time. So not sure what was fixed from the original 8163 but it did work for me.

Just wanted to add that

brendajc

A big thank you to the Fengtao team for all their work in developing a fix for the Twilight Saga so quickly:D I downloaded the latest 8.1.6.3 version and had no problems at all.

virgusa

Thanks.

chris

[QUOTE=fengtao;110126]Hi chris,

Please re-download v8163 to see the result.

Best Regards,
Fengtao[/QUOTE]

Thank you...Fengtao, seemed to back up no issues with updated download. Will be watching when wife gets home from church. Will touch in when done. Job well done.

Cheers!

sireast

8.1.6.3

thank you.

mike_r

breaking dawn vs 8163

[QUOTE=fengtao;110126]Hi chris,

Please re-download v8163 to see the result.

Best Regards,
Fengtao[/QUOTE]

i just downloaded 8163 for the 3rd time and all it does is read and error i tell it to ignore error and it just reads, i did try to disable pathfinder and again it went to 5% and stopped....

tbfelton

WooHoo thanks to whomever figured out the whole chapter 10 thing. It worked PERFECTLY.... Thanks again.So to all the people coming in for answers, currently that is the best suggestion.

What i did.
1.downloaded the newest system
2.turned off pathfinder
3.went into customize part, and selected chapter 10

And there you go, it was done in less than an hour. It worked perfectly with no errors, no lags, no freezing. It was good.

signals

It is Title 10, not Chapter 10. The resistered version of DVDFab v8.1.6.3 should support this title, the free version does not. If it does not work, please state which version of DVDFab you have (free or registered) and what region the disc is and post the DVDFab internal log.

« Previous Page Next Page »