Analyzing Very Slow

stansher

3 different titles took longer than 30 min to analyze, reverted back to 8.1.9.0 and analyzation completed in under 4 min. I have an I7 Ivy bridge system ann evga GTX 460 V2 and 24 GB Ram.

BenieUK

Yes i noticed this too, it started about 3 versions ago.. 40 mins to analyze one movie..

Bill2

Yes I am having the same problem, It started with 8.1.9.6 and I also tried the latest beta 8.1.9.7 with the same results. Also I noticed the compression times (BD50 to BD25) take much longer. I reinstalled 8.1.9.0 and the issue went away

signals

Please post the DVDFab internal log entry from one of these "long analysis" titles so we can see what is happening.

Bill2

Updated to 8.1.9.8 and still having the same problem, Here is internal log entry.

Bill2

I reinstalled 8.1.9.0 and ran the same BDMV folder and here is the log file for that and the speed was back to normal

jimp124

Me Too

Also noticed that the most recent versions are analyzing way too slow. I've also had to go back to an earlier version.

dcc1048

v.8.1.9.8 QT War Horse

I had the same problem with WAR HORSE on the new version 8.1.9.8 at Main Movie. Took forever to analyse and then copy. Once thru that, burned normal speed. Ended up letting the whole process run all night. Came out fine, but a real hassle. Two others after that were normal timeframe Main Movie.

Probably had something on the disk that was hard to analyse....

Just an FYI.

BenieUK

Is this been worked on? still in the newest beta... very slow

rggauld

Analyzing problems...

I have had the same problem with the last few versions of DVDFab....
The analyzing process takes forever to complete...
I am including the log file as well as a few screenshots showing
that one process took 1 hour and 40 minutes just to get to 65%...

fab_admin

Me too.

i7-3770K/Z77
8GB DDR3 1600 RAM
Gigabyte AMD 6770

I was evaluating Blu-ray Copy 8.1.9.6, now 8.2, in consideration of purchasing when the trial expires.

In analyzing BD50 to BD9/1080p/i, it's taking 2 hours to completion of just that task. Whether choosing Software, DXVA or AMD APP, my CPU and GPU monitors just sit there as in an idle state. Unlike my observations in this yet unanswered post:

What's more, I cannot tell the difference between Software, DXVA and AMD APP nor does at any point in time is there an indication of what is actually in use. As in "whatever process using DXVA" when analyzing.

Any explanation/fix?

fab_admin

Forgot to mention in previous post: Win7hpSP1x64

Using Revo Uninstaller Pro and a registry sweep with WinUtilities Pro as well as a manual purge of two more registry items, I completely removed my installation.

I installed 8.2.0.0 and ran three BD50 > DV9/10800/i "analyzings" to 25%:
AMD APP 12 minutes
DXVA 10 minutes
Software 8 minutes
As before, my CPU and GPU monitors displayed as if the system were at idle.
However, the two-hour analysis previous experienced was no longer an issue.

But for all intents and purposes, my AMD utilization is broken which causes me to wonder if all the DVDFab claims are valid.

Again, any explanation/fixes?

BenieUK

v8.2.0.0 Qt (Win)

John Carter (2012) 3D UK, movie only 3d.. been stuck on analize between 70 and 80 % for 1 hour 30 mins then i had to cancel with out backing up movie :(

most others work fine and analize within 10 minutes.. only a select amount have this long analize bug.

UPDATE: Mounted the encyrpted image into a virtual drive and ran 'OTHER' on the fly decyrpting software and opened that with DVD-Fab ... then analize completed in 14 minutes??? un sure what that meaans but hope it helps to solve this problem.

8855A

I'm trying to understand what you mean by it takes to long to analyze, I did Iron Man II like someone else did in this thread! It took only 34min's and something and that was I guess to analyze and copy to HDD! Could someone explain the log I posted as far as time goes? I hadn't had any problems at all with new version or past versions! Correct me if I'm wrong with the time!, please!:confused:

DVDFab 8.2.0.0 (2012/08/09 00:27:35)

0m 00.95s: GPUAccelerate: 28735
0m 00.96s: CUDA cap: 1
0m 00.96s: Support coreavc decode: 1
0m 00.96s: Graphics info: NVIDIA GeForce GTX 460 : 5.0 : 2.1
0m 00.96s: Qt Translator file load success
0m 00.99s: Load config successful.
0m 01.07s: Init profile data driver sucessful.
0m 02.67s: Init GPU settings sucessful.
0m 02.67s: option dvd2dvd 0 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 02.68s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 02.88s: Config ExBar successful.
0m 02.88s: dvd2dvd have 8 elements.
0m 02.96s: dvd2mobile have 31 elements.
0m 03.67s: blu-ray2blu-ray have 4 elements.
0m 03.69s: blu-ray2mobile have 20 elements.
0m 04.15s: blu-ray23d have 7 elements.
0m 04.29s: blu-ray2dvd have 1 elements.
0m 04.31s: file2mobile have 30 elements.
0m 05.01s: file2dvd have 1 elements.
0m 05.03s: file2bluray have 1 elements.
0m 05.28s: Config work ui controls successful.
0m 09.22s: Init burn engine successful.
0m 09.25s: StartNotify successful.
2m 30.36s: opening drive D
2m 30.39s: got media type 15
2m 30.71s: got max lba 20509439
2m 31.85s: type Blu-ray BDMV
2m 31.85s: volume label IRON_MAN_2_D1_AC
2m 33.46s: aacs 1 bd+ 0
2m 42.54s: Java protection is removed by StealthyClone anti-protection.
2m 42.74s: got discinfo
2m 43.03s: got bdmv
2m 43.05s: Vendor: PIONEER
2m 43.05s: Product: BD-RW BDR-206D
2m 43.05s: Revision: 1.06
2m 43.06s: Vendor specific: 11/04/18 PIONEER
2m 43.06s: AACS version: 1
2m 43.06s: Number of concurrent AGIDs: 1
2m 43.06s: Supports bus encryption: NO
2m 43.06s: Supports binding nonce generation: YES
2m 43.07s: Supports Hybrid discs: NO
2m 43.08s: got agid 0
2m 43.16s: sent host cert chal
2m 43.17s: got drive cert chal
2m 43.18s: BEC 0
2m 43.18s: DRIVE_VENDOR 0x0103
2m 43.24s: got drive key
2m 43.69s: got host key signature
2m 43.69s: verified drive signature
2m 43.69s: verified host signature
2m 43.75s: sent host signature and key point
2m 43.75s: got bus key
2m 43.77s: got agid 0
2m 43.85s: sent host cert chal
2m 43.87s: got drive cert chal
2m 43.87s: BEC 0
2m 43.87s: DRIVE_VENDOR 0x0103
2m 43.93s: got drive key
2m 43.93s: got host key signature
2m 43.93s: verified drive signature
2m 43.94s: verified host signature
2m 43.99s: sent host signature and key point
2m 44.00s: got bus key
2m 44.33s: got volume id
2m 44.34s: got volume id mac
2m 44.34s: volume id is correct
2m 44.34s: got vid
2m 44.51s: blu-ray 25352B1981521B278B6B9AD503B4907B43E62071
2m 44.97s: cert BEE=0x00 same
2m 45.76s: D 93248E3C
2m 45.77s: got vuk
2m 45.96s: got unit key 7
3m 39.57s: got extended bdinfo
3m 39.57s: opened blu-ray
4m 31.82s: Blu-ray Copy: Main Movie
4m 31.82s: Source: D:/BDMV/
4m 31.82s: Playlist: 847
4m 31.83s: Chapters: 1 -> 18
4m 31.83s: TotalSize: 35445 MB
4m 31.83s: SourceSize: 35445 MB
4m 31.83s: RemoveHDAudio: 0
4m 31.83s: CompressToAC3: 0
4m 31.84s: OutputSize: 46100 MB
4m 31.84s: OutputDisc: BDMV
4m 31.84s: OutputTarget: BD50
4m 31.84s: OutputVideo: 1080p/i
4m 31.84s: info: enable bd copy(mode=0)
4m 31.84s: info: streams()
4m 31.84s: info: blu-ray copy begin (unit[elem[atomic[00800.m2ts],atomic[00801.m2ts],atomic[00803.m2ts],atomic[00804.m2ts],atomic[00806.m2ts],atomic[00807.m2ts],atomic[00809.m2ts],atomic[00810.m2ts],atomic[00812.m2ts],atomic[00813.m2ts],atomic[00815.m2ts],atomic[00816.m2ts],atomic[00818.m2ts],atomic[00819.m2ts],atomic[00821.m2ts],atomic[00822.m2ts],atomic[00824.m2ts],atomic[00825.m2ts],atomic[00827.m2ts],atomic[00828.m2ts],atomic[00830.m2ts],atomic[00831.m2ts],atomic[00833.m2ts],atomic[00834.m2ts],atomic[00836.m2ts],atomic[00837.m2ts],atomic[00839.m2ts],atomic[00840.m2ts],atomic[00842.m2ts],atomic[00843.m2ts],atomic[00845.m2ts]]])
4m 31.85s: info: processing source(00800.m2ts)
5m 42.73s: info: processing source(00801.m2ts)
5m 58.31s: info: processing source(00803.m2ts)
6m 45.93s: info: processing source(00804.m2ts)
6m 54.44s: info: processing source(00806.m2ts)
9m 55.10s: info: processing source(00807.m2ts)
10m 03.89s: info: processing source(00809.m2ts)
11m 46.06s: info: processing source(00810.m2ts)
11m 51.51s: info: processing source(00812.m2ts)
15m 48.28s: info: processing source(00813.m2ts)
15m 51.00s: info: processing source(00815.m2ts)
19m 05.38s: info: processing source(00816.m2ts)
19m 12.09s: info: processing source(00818.m2ts)
22m 10.92s: info: processing source(00819.m2ts)
22m 14.51s: info: processing source(00821.m2ts)
25m 21.34s: info: processing source(00822.m2ts)
25m 42.71s: info: processing source(00824.m2ts)
25m 51.21s: info: processing source(00825.m2ts)
26m 04.96s: info: processing source(00827.m2ts)
28m 51.81s: info: processing source(00828.m2ts)
29m 04.06s: info: processing source(00830.m2ts)
31m 26.04s: info: processing source(00831.m2ts)
31m 44.46s: info: processing source(00833.m2ts)
31m 53.19s: info: processing source(00834.m2ts)
31m 57.80s: info: processing source(00836.m2ts)
35m 15.19s: info: processing source(00837.m2ts)
35m 19.97s: info: processing source(00839.m2ts)
35m 50.09s: info: processing source(00840.m2ts)
35m 54.90s: info: processing source(00842.m2ts)
37m 13.51s: info: processing source(00843.m2ts)
37m 21.98s: info: processing source(00845.m2ts)

This is dvdfab Internal log! How do you read it to see how long the analyze took? i5-2500k, Evga gtx 460, Mobo Gigabyte Z68 sandy-bridge, 8GB 1600!

8855A

analyzing very slow

Now I understand what everyone is saying about Analyzing to slow! If you run the BD-50 file back through Fab and compress to BD-25 its slow at Analyzing!

DVDFab 8.2.0.0 (2012/08/09 12:09:10)

0m 04.09s: GPUAccelerate: 28735
0m 04.09s: CUDA cap: 1
0m 04.10s: Support coreavc decode: 1
0m 04.10s: Graphics info: NVIDIA GeForce GTX 460 : 5.0 : 2.1
0m 04.10s: Qt Translator file load success
0m 04.18s: Load config successful.
0m 04.32s: Init profile data driver sucessful.
0m 06.14s: Init GPU settings sucessful.
0m 06.15s: option dvd2dvd 0 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 06.15s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 06.39s: Config ExBar successful.
0m 06.39s: dvd2dvd have 8 elements.
0m 06.47s: dvd2mobile have 31 elements.
0m 07.18s: blu-ray2blu-ray have 4 elements.
0m 07.20s: blu-ray2mobile have 20 elements.
0m 07.66s: blu-ray23d have 7 elements.
0m 07.79s: blu-ray2dvd have 1 elements.
0m 07.82s: file2mobile have 30 elements.
0m 08.51s: file2dvd have 1 elements.
0m 08.53s: file2bluray have 1 elements.
0m 08.78s: Config work ui controls successful.
0m 11.72s: Init burn engine successful.
0m 11.76s: StartNotify successful.
0m 58.69s: opening folder F:/MainMovie/IRON_MAN_2_D1_AC/BDMV/
0m 58.90s: got bdmv
0m 59.74s: got extended bdinfo
11m 08.64s: Blu-ray Copy: Main Movie
11m 08.66s: Source: F:/MainMovie/IRON_MAN_2_D1_AC/BDMV/
11m 08.66s: Playlist: 0
11m 08.66s: Chapters: 1 -> 18
11m 08.66s: TotalSize: 31891 MB
11m 08.67s: SourceSize: 31891 MB
11m 08.67s: RemoveHDAudio: 0
11m 08.67s: CompressToAC3: 0
11m 08.67s: OutputSize: 23000 MB
11m 08.67s: OutputDisc: BDMV
11m 08.67s: OutputTarget: BD25
11m 08.67s: OutputVideo: 1080p/i
11m 08.68s: info: enable bd copy(mode=0)
11m 08.72s: info: video encode mode(0), bitrate(4097), lr-encode(no)
11m 08.72s: info: streams(4113.2)
11m 08.72s: info: blu-ray copy begin (unit[elem[atomic[00800.m2ts],atomic[:o)

fab_admin

[QUOTE=8855A;120121]Now I understand what everyone is saying about Analyzing to slow![/QUOTE]
Congratulations. ;)

[QUOTE=8855A;120121]If you run the BD-50 file back through Fab and compress to BD-25 its slow at Analyzing![/QUOTE]
And BD50 > BD9 1080p/i
And probably BD5 tho I haven't done one of those yet.
.