Ater I compress and copy my Blu Ray as an ISO to make it fit a BDR 25GB disc. I change my source to the ISO file I just made and choose my target as my Blu Ray drive. When I put my Blu Ray RW dsic in and try to burn it tells me to "please insert compatible media", any idea what I'm doing wrong?

Did you use the Write Data mode to burn the ISO file? Wilson

I'm not sure if I did what you are saying (sorry, I'm new at burning 3D). All I did was change the source file to the ISO and the target to the Blu Ray drive. It would act as if it were burning (stopped getting the insert compatible media message) the file, but then I would look at the BR when done and it would have the movie title, but the disc was empy. If I'm trying to burn in the wrong way, exactly how do I put it in the write data mode? Please give me a step by step. Thank you so much

Ok, I've figured out how to put it in the write data mode. However, the size of the file is 23,680GB, but when I put in a 25GB disc to burn it's telling me to insert a dual layer BR dic, that the project is to large to burn on a single layer. I'm not sure why I need to compress or how to compress it?

The why is disk manufacturers size their product using base 10 number system and computers understand Binary numbering system so a 25GB disk holds 23.283GB so you are over the limit. The how might be to select the movie only and compress.

Speedinbk:If you want to check remove hd audio when the save as 3d screen comes up the disk will be a smaller size and able to burn on a 25 gig disk.Just check the little box that says remove hd audio, Fab will re do the math with out the HD sound and allow you to proceed using a 25 gig disk.You still get a good sound track from DTS or Dolby digital in surround sound just not the DTS HD audio or Dolby true.Use this trick when you need to shave a little off the total to make it fit on a 25 gig disk when the total gigs is just over the 25 gig limit like the disk your telling us about.Their are other tricks like you can cut the end credits to make the total disk smaller but use the remove hd audio for now later you can learn other tricks and learn how to compress.This way you don't need to compress which takes hours to do takes me about 13 hours with a 2 core computer to do a 3d movie from 50 gigs to 25 gigs.Faster and more cores in the computer the compress time could go down to 3-4 hours.

I am backing up Iceage 3D and they only have the HD audio in English (they do have other languages, but that won't help me..lol). I have taken off as much as possible, (all languuages and captioning), but it seems most of my backups are just over the amount. So I guess in this case I will not be able to back up unless I figure another work around.

You are not out of luck but your not doing as i say.When the copy as 3d page comes up theirs a box that you can check that says remove hd audio that you are going to check just for this movie it removes the hd audio but also decodes from the hd audio a DTS or dolby digital sound track in english and replaces the hi bandwith hd sound that takes up a lot of space and replaces with a much lower space taking dolby digital or regular Dts soundtrack just do it and see the result.

In case you don't know after taking out the soundtracks in other than English and the other stuff then you go to the next page where it gives you the choice to make a 3d disk that's already pre checked and their you should see the small box that you will check to take out hd audio like i said it will replace your audio with Dolby digital or Dts soundtracks depending which the disk started with.

One last thing theirs a list of movies the first thing listed in the list of topics in this thread is movies that fit on 25 gig disks so check that out also to see if the movie your doing has already been done and added to the list already.I didn't see older movies like the one your doing on this list as most are newer movies.And the list is not complete but it does serve as something a new user may find helpful.Your going to compress at some point and their are useful step by step videos on you tube showing how to do it.

I've looked at a couple of my 3D titles and as I am familar with the remove HD audio that you are talking about, the box to check and remove HD audio were not there when I got to the page it should be on. Not sure if that's common or if that is an exception.

Blu Ray 3D "Insert compatible media"

glenns

Please make a ISO of the 3d blu ray first step 1 shows you how.

1-in blu ray copy select CLONE insert 3d blu ray store brought disk in blu ray drive.Source will be your blu ray drive, target change to dvdfab iso folder this is a clone folder in dvd fabs files and is where you will look for it later.
Press start this will copy the disk exactly to your hard drive as a iso should take about 50 mins. or so to do when done disk is ejected and you click on finish and close fab.Now in the next step you will make the 3d disk from the Iso(clone) folder in fab you just made.

2-Now open fab blu ray copy click on main movie go into fabs files and find the iso you just made in the clone file folder drag the file into fab.Put a 25 gig disk into blu ray drive.Target is your blu ray drive, source is the file you just dragged into fab.Here you take out anything you don't want but leave the English dts master pre checked file or whatever master audio file is checked.Now below theirs a hd audio box you can check to take out the hd audio only do this if you don't want this soundtrack or to make the file fit on a 25 gig disk without trans coding the movie that's the very long process of reducing the file to fit on a 25 gig disk.Now theirs a box to check on the bottom that says 50 gig and has a pull down box to the right, pull down this box and click on 25 gig fab will do the math if the disk doesn't need to be reduced fab will make a temporary file with the instructions you just gave it after that file is made about 20-30 Min's if the file need no compression it will go right to the burn and burn the temporary folder.If fab needs to reduce the file it can take 13 hours on a dual core computer less for 4 core computers then after if does the compress it does the burn.Their are other ways to do this but this is the easy way.

speedinbk

Glen,

Thanks for the step by step, I wasn't doing the Clone first. I was going straight into copy main movie 3D.

I'll try it like this when I get in from wk this evening and report back.

Thanks again for everyone's help. I hope another person will be able to Benifit from this thread.

speedinbk

Since you guys put in so much effort, I felt I at least owed you the respect of a reply after my attempt.

Glen: I followed your last instructions step by step, with nothing left undone. The results were the same as they have been up to now. Everything seems to work without flaw until I get to the burn process. It goes through the 30min burn process (or at least that what it seems to be doing) only to be a blank disc when the burn is finished.
I'm beginning to wonder if the Blu Ray rewiteable disc could be the problem, and that I need to use write once Blu Rays for 3D burns. I have used three different Blu Ray rewritables and have had the same results on all three. Have each of you tried the burn process with Blu Ray rewritables with 3D burns?

I can't thank both of you enough for trying to help get this working for me. Thanks again guys!

I've invested so much time into getting this to work properly I think I'm starting to waive the white flag and just give up. After burning over a hundred 2D Blu Rays over the last four years without a single problem, this has just gotten the better of me.

glenns

Go to fab settings the green checked box takes you their,look for dvd/blu ray under WRITE check to make sure blu ray (write speed is recommended) in the box not fastest etc.Then check for the box that says overwrite rewritable media automatically make sure this box is checked as if it's not checked and you have something on the disk already fab will show a dialog box when you insert the blu ray disk that tells you that the disk already has information on it overwrite data? then you must answer fab with ok or fab won't overwrite the disk unless of course you check this box in the settings in the above manner.If you do this and it doesn't do the burn then the disks you are using are defective,dirty,scratched and may have outlived their useful life.Please use a burn once disk they are down to about a buck each now and burn at much faster than 1 or 2 x speeds.Also you can post your burn log to see if theirs burn errors in it.Your burn logs are in fabs log files.

glenns

Also under WRITE in fab settings Make sure (dvd fab burning engine) is checked.Just for you I burned a 3d movie to rewritable disk using the fab burning engine and a second way with another program we use called Img burn both gave good results with the 3d movie burned onto a rewritable disk so my thoughts without looking at your burn files say its your rewritable disks.try burning a regular blu ray to them and see if that works use fab to do the burn if that doesn't work then it's the disks or your burning laser is at fault.

speedinbk

Glenn:

1. Recommended is checked
2. I will check the overwrite box (however, Fab has been asking if I want to overwrite and I have been clicking the ok box)
3. I've used these RW about six times for various testing, but the outer layers of them are in mint, no scratches.
4. I did have the Fab burn engine set for the last week while trying to work with 3D. However, I changed it back to Image Burn last night after the first test didn't work with the Fab engine and when the 2nd test went to burn it automatically switched from Image Burn to the Fab burn engine
5. I am going to attempt a brun with a regular burn once blu ray after wk, I'll let you know what happens
6. I am also going to try and burn one of my 2D discs to the RW media I've been using and see if that will wk
7. I also updated to the newest version of fab last night.

Thanks for testing a RW yourself.
I guess you opened the 3D ISO file in IB since it won't do it in DVDfab?
I'll let you know of my results later...

glenns

I don't open 3d iso's i just open the folder they are in or drive their on and drag it into the opened fab program.I want you to go into dvdfabs burn files and highlight the last or all the trys you did then cut and paste them into a post here to we all can see whats going on instead of guessing whats wrong.I enclosed a burn log file from my last two burns so you see what it looks like and when a disk is burnt it starts from the inside of the disk and works to the outside so if the disk is damaged on the inside track the disk may not burn.All is revealed in the burn log files even in img burn they both have internal logs so if something goes wrong it will tell you or give you a code that can be figured out by staff here so please post your burn log files please get use to doing this as staff here will always tell you thats what they really need to look at to help you.Why keep guessing when the logs tell all in most cases.here is my last two so you can see what they are like.

02:16:32 Info Input Speed is: 8990, Output Speed: 8990

02:16:32 Info StartPerf Speed: 8990, EndPerf Speed: 8990

Burn Folder 2012-11-16 02:16:32 -----------------------------------------------

02:16:32 Info RootDir: H:/

02:16:32 Info VolumeName: BD_VOLUME

02:16:32 Info WriteMode: 4

02:16:33 Info Operation Started!

02:16:33 Info Source File Size: 11931 MB

02:16:37 Info Writing LeadIn...

02:16:37 Info Write started 6108704 sectors to write

02:39:56 Info Synchronising Cache...

02:39:56 Info Synchronising Disc 0

02:39:57 Info Synchronising Disc 65536

02:40:00 Info Operation Successfully Completed! - Duration: 00:23:24

02:44:13 Info Input Speed is: 8990, Output Speed: 8990

02:44:13 Info StartPerf Speed: 8990, EndPerf Speed: 8990

Burn Iso 2012-11-16 02:44:13 --------------------------------------------------

02:44:13 Info IsoFile: M:/SPORTS_ILLUSTRATED Swimsuits 2011_3D.ISO

02:44:13 Info WriteMode: 4

02:44:13 Info LayerBreak: 0

02:44:13 Info Operation Started!

02:44:13 Info Source File Size: 11937 MB

02:44:22 Info Writing LeadIn...

02:44:22 Info Write started 6111872 sectors to write

03:07:41 Info Synchronising Cache...

03:07:41 Info Synchronising Disc 0

03:07:42 Info Synchronising Disc 65536

03:07:46 Info Operation Successfully Completed! - Duration: 00:23:30

glenns

Also you said dvd fab won't play a iso but it will here's how- put the iso disk or iso computer file into fab, click main movie, use the small preview player to check disk or file you can also make the small viewer full screen.

speedinbk

Here are the last few days Logs: Tell me what you think.

Burn Folder 2012-11-11 18:37:02 -----------------------------------------------

18:37:02 Info RootDir: F:/DVDFAB folder/Temp/Temp/MainMovie/ICEAGE3_3DBUNDLE_WW/

18:37:02 Info VolumeName: ICEAGE3_3DBUNDLE_WW

18:37:02 Info WriteMode: 4

18:37:02 Info Operation Started!

18:37:02 Info Source File Size: 22221 MB

18:37:12 Info Writing LeadIn...

18:37:12 Info Write started 11377536 sectors to write

20:28:21 Info Synchronising Cache...

20:28:22 Info Synchronising Disc 0

20:28:24 Info Synchronising Disc 65536

20:28:29 Info Operation Successfully Completed! - Duration: 01:51:22

Burn Folder 2012-11-11 21:30:50 -----------------------------------------------

21:30:50 Info RootDir: F:/DVDFAB folder/Temp/Temp/MainMovie/ICEAGE3_3DBUNDLE_WW/

21:30:50 Info VolumeName: ICEAGE3_3DBUNDLE_WW

21:30:50 Info WriteMode: 4

21:30:50 Info Operation Started!

21:30:50 Info Source File Size: 22221 MB

21:30:58 Info Writing LeadIn...

21:30:58 Info Write started 11377536 sectors to write

23:17:33 Info Synchronising Cache...

23:17:33 Info Synchronising Disc 0

23:17:35 Info Synchronising Disc 65536

23:17:41 Info Operation Successfully Completed! - Duration: 01:46:46

Burn Folder 2012-11-12 22:55:17 -----------------------------------------------

22:55:17 Info RootDir: F:/DVDFAB folder/Temp/Temp/FullDisc/ICEAGE3_3DBUNDLE_WW/

22:55:17 Info VolumeName: ICEAGE3_3DBUNDLE_WW

22:55:17 Info WriteMode: 4

22:55:17 Info Operation Started!

22:55:17 Info Source File Size: 23046 MB

22:55:27 Info Writing LeadIn...

22:55:27 Info Write started 11799776 sectors to write

00:43:29 Info Synchronising Cache...

00:43:30 Info Synchronising Disc 0

00:43:32 Info Synchronising Disc 65536

00:43:37 Info Operation Successfully Completed! - Duration: 01:48:15

20:50:33 Info Input Speed is: 8990, Output Speed: 8990

20:50:33 Info StartPerf Speed: 8990, EndPerf Speed: 8990

speedinbk

I also wanted to tell you I wanted to test your theory of the burn laser possibly going out. I just copied and burned a 2D disc. No Problems:

Not sure if this type of Log will help you, but I've added it as well:

DVDFab 8.2.1.5 (2012/11/11 09:13:59)

0m 00.96s: GPUAccelerate: 12351
0m 00.96s: CUDA cap: 1
0m 00.96s: Support coreavc decode: 0
0m 00.96s: Graphics info: NVIDIA GeForce GTX 570 : 4.20 : 2.0
0m 00.96s: Qt Translator file load success
0m 00.99s: Load config successful.
0m 00.99s: Init profile data driver sucessful.
0m 02.93s: Init GPU settings sucessful.
0m 02.93s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 0 bd2dvd 0 file2dvd 1 file2bluray 1 file2mobile 0 filemover 0
0m 02.94s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 03.16s: Config ExBar successful.
0m 03.16s: dvd2dvd have 8 elements.
0m 03.29s: dvd2mobile have 32 elements.
0m 04.10s: blu-ray2blu-ray have 4 elements.
0m 04.11s: blu-ray2mobile have 21 elements.
0m 04.64s: blu-ray23d have 7 elements.
0m 04.64s: blu-ray2dvd have 1 elements.
0m 04.64s: file2mobile have 31 elements.
0m 04.66s: file2dvd have 1 elements.
0m 04.68s: file2bluray have 1 elements.
0m 04.96s: Config work ui controls successful.
0m 07.19s: Init burn engine successful.
0m 07.25s: StartNotify successful.
0m 07.26s: opening drive K
0m 07.26s: opened i/o
0m 07.28s: got media type 17
0m 08.10s: got disc type 0
0m 08.10s: got max lba 11826175
0m 09.13s: type Blu-ray BDMV
0m 09.13s: volume label JEFF_LIVES_AT_HOME
0m 09.84s: aacs 0 bd+ 0
0m 11.22s: user cancelled
0m 11.23s: failed to open 1
2m 19.25s: opening drive K
2m 19.26s: opened i/o
2m 19.28s: got media type 15
2m 19.95s: got disc type 0
2m 19.95s: got max lba 24438783
2m 21.60s: type Blu-ray BDMV
2m 21.60s: volume label ICEAGE3_3DBUNDLE_WW
2m 26.08s: aacs 1 bd+ 1
2m 34.30s: Java protection is removed by StealthyClone anti-protection.
2m 34.44s: got discinfo
2m 34.88s: got bdmv
2m 34.90s: Vendor: PIONEER
2m 34.90s: Product: BD-RW BDR-205
2m 34.90s: Revision: 1.03
2m 34.90s: Vendor specific: 09/09/11 PIONEER
2m 34.90s: AACS version: 1
2m 34.90s: Number of concurrent AGIDs: 1
2m 34.90s: Supports bus encryption: NO
2m 34.90s: Supports binding nonce generation: YES
2m 34.90s: Supports Hybrid discs: NO
2m 34.90s: got agid 0
2m 34.97s: sent host cert chal
2m 34.99s: got drive cert chal
2m 34.99s: BEC 0
2m 34.99s: DRIVE_VENDOR 0x0067
2m 35.04s: got drive key
2m 36.05s: got host key signature
2m 36.05s: verified drive signature
2m 36.07s: verified host signature
2m 36.11s: sent host signature and key point
2m 36.11s: got bus key
2m 36.14s: got agid 0
2m 36.21s: sent host cert chal
2m 36.22s: got drive cert chal
2m 36.22s: BEC 0
2m 36.22s: DRIVE_VENDOR 0x0067
2m 36.27s: got drive key
2m 36.27s: got host key signature
2m 36.29s: verified drive signature
2m 36.29s: verified host signature
2m 36.33s: sent host signature and key point
2m 36.33s: got bus key
2m 36.99s: got volume id
2m 36.99s: got volume id mac
2m 36.99s: volume id is correct
2m 36.99s: got vid
2m 37.19s: blu-ray 1F5CD341D24285F0443EEBC33EA426AD336C6F12
2m 37.95s: cert BEE=0x00 same
2m 38.53s: D 788F51F2
2m 56.21s: got vuk
2m 56.21s: got fut
2m 56.50s: got unit key 7
3m 04.49s: got extended bdinfo
3m 04.49s: opened blu-ray
5m 34.40s: Blu-ray Copy: Main Movie
5m 34.40s: Source: K:/BDMV/
5m 34.40s: Playlist: 852
5m 34.40s: Chapters: 1 -> 21
5m 34.40s: TotalSize: 36164 MB
5m 34.40s: SourceSize: 32842 MB
5m 34.40s: RemoveHDAudio: 0
5m 34.40s: CompressToAC3: 0
5m 34.40s: OutputSize: 23098 MB
5m 34.40s: OutputDisc: BDMV
5m 34.40s: OutputTarget: BD25
5m 34.40s: OutputVideo: 1080p/i
5m 34.40s: 3DMode: Blu-ray 3D
5m 34.40s: info: enable bd copy(mode=1)
5m 34.42s: info: video encode mode(0), bitrate(28723), lr-encode(no)
5m 34.42s: info: streams(4113.2,4352.1,4353.1,4354.1,4608.1)
5m 34.42s: info: blu-ray copy begin (unit[elem[atomic[00001.ssif]]])
5m 34.42s: info: h264_encode: encode param profile(2) level(41) bitrate(28723)
5m 34.45s: info: processing source(00001.ssif)
122m 02.24s: info: group(elem[atomic[00001.ssif]]) playtime(5641761 ms) source(36164 MB) request(22867 MB) real(23123 MB) bitrate(28723 kbps)
122m 02.26s: compress finished: groups request(22867 MB, 22867 MB) real(23123 MB) average_bitrate(28723 kbps)
556m 17.79s: opening iso G:/ICEAGE3_3DBUNDLE_WW.iso
556m 27.07s: got media type 15
556m 27.12s: got disc type 0
556m 27.12s: got max lba 11840383
556m 27.40s: type Blu-ray BDMV
556m 27.40s: volume label ICEAGE3_3DBUNDLE_WW
556m 27.43s: opening iso G:/ICEAGE3_3DBUNDLE_WW.iso
556m 27.43s: got disc type 0
556m 27.43s: got max lba 11840383
556m 27.45s: aacs 0 bd+ 0
556m 27.48s: got discinfo
556m 27.48s: got bdmv
556m 27.49s: got extended bdinfo
556m 27.49s: opened blu-ray
556m 49.35s: opening drive K
556m 49.36s: opened i/o
556m 49.38s: got media type 17
556m 50.59s: got disc type 0
556m 50.59s: got max lba 11826175
556m 51.61s: type Blu-ray BDMV
556m 51.61s: volume label JEFF_LIVES_AT_HOME
556m 52.81s: aacs 0 bd+ 0
556m 55.35s: got discinfo
556m 58.64s: user cancelled
556m 58.64s: exception when getting bdinfo 1003 102 26
556m 58.64s: failed to open 1
557m 16.79s: Blu-ray Copy: Main Movie
557m 16.79s: Source: [:/BDMV/
557m 16.79s: Playlist: 0
557m 16.79s: Chapters: 1 -> 21
557m 16.79s: TotalSize: 23123 MB
557m 16.79s: SourceSize: 22213 MB
557m 16.79s: RemoveHDAudio: 0
557m 16.79s: CompressToAC3: 0
557m 16.79s: OutputSize: 23098 MB
557m 16.79s: OutputDisc: BDMV
557m 16.79s: OutputTarget: BD25
557m 16.79s: OutputVideo: 1080p/i
557m 16.79s: 3DMode: Blu-ray 3D
557m 16.79s: info: enable bd copy(mode=1)
557m 16.79s: info: stream(4113 - 28) not need compress, change to copy mode
557m 16.79s: info: streams(4113.1,4352.1,4608.1)
557m 16.79s: info: blu-ray copy begin (unit[elem[atomic[00001.ssif]]])
557m 16.81s: info: processing source(00001.ssif)
697m 21.00s: opening drive K
697m 21.02s: opened i/o
697m 21.04s: got media type 17
697m 22.30s: got disc type 0
697m 22.30s: got max lba 11826175
697m 23.30s: type Blu-ray BDMV
697m 23.30s: volume label ICEAGE3_3DBUNDLE_WW
697m 23.33s: aacs 0 bd+ 0
697m 23.88s: got discinfo
697m 24.05s: got bdmv
697m 24.31s: got extended bdinfo
697m 24.31s: opened blu-ray

DVDFab 8.2.1.5 (2012/11/11 21:20:38)

0m 00.95s: GPUAccelerate: 12351
0m 00.95s: CUDA cap: 1
0m 00.95s: Support coreavc decode: 0
0m 00.95s: Graphics info: NVIDIA GeForce GTX 570 : 4.20 : 2.0
0m 00.96s: Qt Translator file load success
0m 00.99s: Load config successful.
0m 00.99s: Init profile data driver sucessful.
0m 02.93s: Init GPU settings sucessful.
0m 02.93s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 0 bd2dvd 0 file2dvd 1 file2bluray 1 file2mobile 0 filemover 0
0m 02.93s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 03.15s: Config ExBar successful.
0m 03.15s: dvd2dvd have 8 elements.
0m 03.27s: dvd2mobile have 32 elements.
0m 04.08s: blu-ray2blu-ray have 4 elements.
0m 04.10s: blu-ray2mobile have 21 elements.
0m 04.63s: blu-ray23d have 7 elements.
0m 04.63s: blu-ray2dvd have 1 elements.
0m 04.63s: file2mobile have 31 elements.
0m 04.64s: file2dvd have 1 elements.
0m 04.66s: file2bluray have 1 elements.
0m 04.94s: Config work ui controls successful.
0m 12.85s: Init burn engine successful.
0m 12.91s: StartNotify successful.
0m 13.82s: opening drive K
0m 13.84s: opened i/o
0m 13.86s: got media type 17
0m 14.35s: got disc type 0
0m 14.35s: got max lba 11826175
0m 15.34s: type Blu-ray BDMV
0m 15.34s: volume label ICEAGE3_3DBUNDLE_WW
0m 15.35s: aacs 0 bd+ 0
0m 15.91s: got discinfo
0m 16.09s: got bdmv
0m 16.32s: got extended bdinfo
0m 16.32s: opened blu-ray
3m 08.78s: opening iso G:/ICEAGE3_3DBUNDLE_WW.iso
3m 08.79s: got media type 15
3m 08.81s: got disc type 0
3m 08.82s: got max lba 11840383
3m 09.12s: type Blu-ray BDMV
3m 09.12s: volume label ICEAGE3_3DBUNDLE_WW
3m 09.15s: aacs 0 bd+ 0
3m 09.18s: got discinfo
3m 09.18s: got bdmv
3m 09.18s: got extended bdinfo
3m 09.18s: opened blu-ray
4m 38.11s: Blu-ray Copy: Main Movie
4m 38.11s: Source: [:/BDMV/
4m 38.11s: Playlist: 0
4m 38.11s: Chapters: 1 -> 21
4m 38.11s: TotalSize: 23123 MB
4m 38.11s: SourceSize: 22194 MB
4m 38.11s: RemoveHDAudio: 0
4m 38.11s: CompressToAC3: 0
4m 38.11s: OutputSize: 23098 MB
4m 38.11s: OutputDisc: BDMV
4m 38.11s: OutputTarget: BD25
4m 38.11s: OutputVideo: 1080p/i
4m 38.11s: 3DMode: Blu-ray 3D
4m 38.11s: info: enable bd copy(mode=1)
4m 38.11s: info: stream(4113 - 28) not need compress, change to copy mode
4m 38.12s: info: streams(4113.1,4352.1,4608.1)
4m 38.12s: info: blu-ray copy begin (unit[elem[atomic[00001.ssif]]])
4m 38.12s: info: processing source(00001.ssif)

speedinbk

DVDFab 8.2.1.5 (2012/11/12 11:28:40)

0m 01.06s: GPUAccelerate: 12351
0m 01.06s: CUDA cap: 1
0m 01.06s: Support coreavc decode: 0
0m 01.06s: Graphics info: NVIDIA GeForce GTX 570 : 4.20 : 2.0
0m 01.06s: Qt Translator file load success
0m 01.09s: Load config successful.
0m 01.09s: Init profile data driver sucessful.
0m 03.02s: Init GPU settings sucessful.
0m 03.02s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 0 bd2dvd 0 file2dvd 1 file2bluray 1 file2mobile 0 filemover 0
0m 03.04s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 03.26s: Config ExBar successful.
0m 03.26s: dvd2dvd have 8 elements.
0m 03.38s: dvd2mobile have 32 elements.
0m 04.18s: blu-ray2blu-ray have 4 elements.
0m 04.21s: blu-ray2mobile have 21 elements.
0m 04.74s: blu-ray23d have 7 elements.
0m 04.74s: blu-ray2dvd have 1 elements.
0m 04.74s: file2mobile have 31 elements.
0m 04.74s: file2dvd have 1 elements.
0m 04.75s: file2bluray have 1 elements.
0m 05.03s: Config work ui controls successful.
0m 06.58s: Init burn engine successful.
0m 06.64s: StartNotify successful.

DVDFab 8.2.1.5 (2012/11/12 11:29:21)

0m 00.95s: GPUAccelerate: 12351
0m 00.95s: CUDA cap: 1
0m 00.95s: Support coreavc decode: 0
0m 00.95s: Graphics info: NVIDIA GeForce GTX 570 : 4.20 : 2.0
0m 00.96s: Qt Translator file load success
0m 00.98s: Load config successful.
0m 00.98s: Init profile data driver sucessful.
0m 02.90s: Init GPU settings sucessful.
0m 02.90s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 0 bd2dvd 0 file2dvd 1 file2bluray 1 file2mobile 0 filemover 0
0m 02.91s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 03.13s: Config ExBar successful.
0m 03.13s: dvd2dvd have 8 elements.
0m 03.26s: dvd2mobile have 32 elements.
0m 04.05s: blu-ray2blu-ray have 4 elements.
0m 04.07s: blu-ray2mobile have 21 elements.
0m 04.60s: blu-ray23d have 7 elements.
0m 04.60s: blu-ray2dvd have 1 elements.
0m 04.60s: file2mobile have 31 elements.
0m 04.60s: file2dvd have 1 elements.
0m 04.61s: file2bluray have 1 elements.
0m 04.89s: Config work ui controls successful.
0m 06.24s: Init burn engine successful.
0m 06.28s: StartNotify successful.
0m 21.75s: opening iso G:/ICEAGE3_3DBUNDLE_WW.iso
0m 21.78s: got media type 15
0m 21.83s: got disc type 0
0m 21.83s: got max lba 11840383
0m 21.93s: type Blu-ray BDMV
0m 21.93s: volume label ICEAGE3_3DBUNDLE_WW
0m 21.95s: aacs 0 bd+ 0
0m 22.20s: got discinfo
0m 22.20s: got bdmv
0m 22.20s: got extended bdinfo
0m 22.20s: opened blu-ray
1m 06.86s: opening drive K
1m 06.88s: opened i/o
1m 06.89s: got media type 17
1m 08.11s: got disc type 0
1m 08.11s: got max lba 11826175
1m 09.09s: type Blu-ray BDMV
1m 09.09s: volume label ICEAGE3_3DBUNDLE_WW

DVDFab 8.2.1.5 (2012/11/12 11:33:49)

0m 00.96s: GPUAccelerate: 12351
0m 00.96s: CUDA cap: 1
0m 00.96s: Support coreavc decode: 0
0m 00.96s: Graphics info: NVIDIA GeForce GTX 570 : 4.20 : 2.0
0m 00.96s: Qt Translator file load success
0m 00.98s: Load config successful.
0m 00.99s: Init profile data driver sucessful.
0m 02.91s: Init GPU settings sucessful.
0m 02.91s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 0 bd2dvd 0 file2dvd 1 file2bluray 1 file2mobile 0 filemover 0
0m 02.91s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 03.13s: Config ExBar successful.
0m 03.13s: dvd2dvd have 8 elements.
0m 03.26s: dvd2mobile have 32 elements.
0m 04.05s: blu-ray2blu-ray have 4 elements.
0m 04.08s: blu-ray2mobile have 21 elements.
0m 04.60s: blu-ray23d have 7 elements.
0m 04.60s: blu-ray2dvd have 1 elements.
0m 04.60s: file2mobile have 31 elements.
0m 04.61s: file2dvd have 1 elements.
0m 04.63s: file2bluray have 1 elements.
0m 04.91s: Config work ui controls successful.
0m 09.32s: Init burn engine successful.
0m 09.39s: StartNotify successful.
0m 10.39s: opening drive K
0m 10.39s: opened i/o
0m 10.41s: got media type 15
0m 10.81s: got disc type 0
0m 10.81s: got max lba 23588223
0m 11.79s: type Blu-ray BDMV
0m 11.79s: volume label DESPICABLE_ME_3D
0m 32.82s: opening folder K:/BDMV/
0m 34.38s: got bdmv
2m 10.29s: user cancelled
2m 10.29s: failed to open 1
2m 11.40s: opening drive K
2m 11.40s: opened i/o
2m 12.00s: got disc type 0
2m 12.00s: got max lba 23588223
2m 12.92s: aacs 1 bd+ 0
2m 22.19s: Java protection is removed by StealthyClone anti-protection.
2m 22.25s: got discinfo
2m 22.39s: got bdmv
2m 22.41s: Vendor: PIONEER
2m 22.41s: Product: BD-RW BDR-205
2m 22.41s: Revision: 1.03
2m 22.41s: Vendor specific: 09/09/11 PIONEER
2m 22.41s: AACS version: 1
2m 22.41s: Number of concurrent AGIDs: 1
2m 22.41s: Supports bus encryption: NO
2m 22.41s: Supports binding nonce generation: YES
2m 22.41s: Supports Hybrid discs: NO
2m 22.42s: got agid 0
2m 22.50s: sent host cert chal
2m 22.50s: got drive cert chal
2m 22.50s: BEC 0
2m 22.50s: DRIVE_VENDOR 0x0067
2m 22.57s: got drive key
2m 23.58s: got host key signature
2m 23.58s: verified drive signature
2m 23.58s: verified host signature
2m 23.64s: sent host signature and key point
2m 23.64s: got bus key
2m 23.66s: got agid 0
2m 23.74s: sent host cert chal
2m 23.74s: got drive cert chal
2m 23.74s: BEC 0
2m 23.75s: DRIVE_VENDOR 0x0067
2m 23.80s: got drive key
2m 23.80s: got host key signature
2m 23.80s: verified drive signature
2m 23.80s: verified host signature
2m 23.86s: sent host signature and key point
2m 23.86s: got bus key
2m 24.48s: got volume id
2m 24.48s: got volume id mac
2m 24.48s: volume id is correct
2m 24.48s: got vid
2m 24.69s: blu-ray 85D88DCF71643EF21D81F3B26F10D0B1E06AD7F4
2m 25.23s: cert BEE=0x00 same
2m 25.73s: D 80F49B9F
2m 25.75s: got vuk
2m 26.01s: got unit key 7
2m 40.88s: got extended bdinfo
2m 40.88s: opened blu-ray
6m 03.07s: opening drive K
6m 03.08s: opened i/o
6m 03.10s: got media type 17
6m 04.35s: got disc type 0
6m 04.35s: got max lba 11826175
6m 05.36s: type Blu-ray BDMV
6m 05.36s: volume label ICEAGE3_3DBUNDLE_WW
6m 05.39s: aacs 0 bd+ 0
6m 05.95s: got discinfo
6m 06.11s: got bdmv
6m 06.34s: got extended bdinfo
6m 06.34s: opened blu-ray
6m 57.39s: opening iso G:/ICEAGE3_3DBUNDLE_WW.iso
6m 57.39s: got media type 15
6m 57.39s: got disc type 0
6m 57.39s: got max lba 11840383
6m 57.39s: type Blu-ray BDMV
6m 57.39s: volume label ICEAGE3_3DBUNDLE_WW
6m 57.40s: aacs 0 bd+ 0
6m 57.43s: got discinfo
6m 57.43s: got bdmv
6m 57.43s: got extended bdinfo
6m 57.43s: opened blu-ray

DVDFab 8.2.1.5 (2012/11/12 11:42:25)

0m 00.98s: GPUAccelerate: 12351
0m 00.98s: CUDA cap: 1
0m 00.98s: Support coreavc decode: 0
0m 00.98s: Graphics info: NVIDIA GeForce GTX 570 : 4.20 : 2.0
0m 00.98s: Qt Translator file load success
0m 01.01s: Load config successful.
0m 01.01s: Init profile data driver sucessful.
0m 02.93s: Init GPU settings sucessful.
0m 02.93s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 0 bd2dvd 0 file2dvd 1 file2bluray 1 file2mobile 0 filemover 0
0m 02.94s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 03.16s: Config ExBar successful.
0m 03.16s: dvd2dvd have 8 elements.
0m 03.29s: dvd2mobile have 32 elements.
0m 04.08s: blu-ray2blu-ray have 4 elements.
0m 04.10s: blu-ray2mobile have 21 elements.
0m 04.63s: blu-ray23d have 7 elements.
0m 04.63s: blu-ray2dvd have 1 elements.
0m 04.63s: file2mobile have 31 elements.
0m 04.63s: file2dvd have 1 elements.
0m 04.64s: file2bluray have 1 elements.
0m 04.94s: Config work ui controls successful.
0m 06.89s: Init burn engine successful.
0m 06.94s: StartNotify successful.
0m 07.99s: opening drive K
0m 08.00s: opened i/o
0m 08.02s: got media type 17
0m 08.50s: got disc type 0
0m 08.52s: got max lba 11826175
0m 09.50s: type Blu-ray BDMV
0m 09.50s: volume label ICEAGE3_3DBUNDLE_WW
0m 31.82s: opening iso G:/ICEAGE3_3DBUNDLE_WW.iso
0m 31.82s: got media type 15
0m 31.82s: got disc type 0
0m 31.82s: got max lba 11840383
0m 31.82s: type Blu-ray BDMV
0m 31.82s: volume label ICEAGE3_3DBUNDLE_WW
0m 31.84s: aacs 0 bd+ 0
0m 31.87s: got discinfo
0m 31.87s: got bdmv
0m 31.87s: got extended bdinfo
0m 31.87s: opened blu-ray

DVDFab 8.2.1.5 (2012/11/12 11:43:57)

0m 00.95s: GPUAccelerate: 12351
0m 00.95s: CUDA cap: 1
0m 00.95s: Support coreavc decode: 0
0m 00.95s: Graphics info: NVIDIA GeForce GTX 570 : 4.20 : 2.0
0m 00.95s: Qt Translator file load success
0m 00.98s: Load config successful.
0m 00.98s: Init profile data driver sucessful.
0m 02.90s: Init GPU settings sucessful.
0m 02.90s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 0 bd2dvd 0 file2dvd 1 file2bluray 1 file2mobile 0 filemover 0
0m 02.90s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 03.12s: Config ExBar successful.
0m 03.12s: dvd2dvd have 8 elements.
0m 03.24s: dvd2mobile have 32 elements.
0m 04.04s: blu-ray2blu-ray have 4 elements.
0m 04.07s: blu-ray2mobile have 21 elements.
0m 04.58s: blu-ray23d have 7 elements.
0m 04.58s: blu-ray2dvd have 1 elements.
0m 04.58s: file2mobile have 31 elements.
0m 04.60s: file2dvd have 1 elements.
0m 04.61s: file2bluray have 1 elements.
0m 04.89s: Config work ui controls successful.
0m 07.84s: Init burn engine successful.
0m 07.90s: StartNotify successful.
0m 19.02s: opening drive K
0m 19.05s: opened i/o
0m 19.06s: got media type 17
0m 19.10s: opening iso G:/ICEAGE3_3DBUNDLE_WW.iso
0m 19.10s: got media type 15
0m 19.10s: got disc type 0
0m 19.10s: got max lba 11840383
0m 19.10s: type Blu-ray BDMV
0m 19.10s: volume label ICEAGE3_3DBUNDLE_WW
0m 19.58s: got disc type 0
0m 19.58s: got max lba 11826175
0m 20.56s: type Blu-ray BDMV
0m 20.56s: volume label ICEAGE3_3DBUNDLE_WW
0m 20.58s: aacs 0 bd+ 0
0m 20.61s: got discinfo
0m 20.61s: got bdmv
0m 20.61s: got extended bdinfo
0m 20.61s: opened blu-ray
6m 13.81s: opening drive K

speedinbk

DVDFab 8.2.1.5 (2012/11/12 11:50:52)

0m 00.96s: GPUAccelerate: 12351
0m 00.96s: CUDA cap: 1
0m 00.96s: Support coreavc decode: 0
0m 00.96s: Graphics info: NVIDIA GeForce GTX 570 : 4.20 : 2.0
0m 00.96s: Qt Translator file load success
0m 00.98s: Load config successful.
0m 00.99s: Init profile data driver sucessful.
0m 02.91s: Init GPU settings sucessful.
0m 02.91s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 0 bd2dvd 0 file2dvd 1 file2bluray 1 file2mobile 0 filemover 0
0m 02.91s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 03.13s: Config ExBar successful.
0m 03.13s: dvd2dvd have 8 elements.
0m 03.26s: dvd2mobile have 32 elements.
0m 04.05s: blu-ray2blu-ray have 4 elements.
0m 04.08s: blu-ray2mobile have 21 elements.
0m 04.61s: blu-ray23d have 7 elements.
0m 04.61s: blu-ray2dvd have 1 elements.
0m 04.61s: file2mobile have 31 elements.
0m 04.61s: file2dvd have 1 elements.
0m 04.63s: file2bluray have 1 elements.
0m 04.91s: Config work ui controls successful.
0m 08.59s: Init burn engine successful.
0m 08.65s: StartNotify successful.
0m 09.66s: opening drive K
0m 09.67s: opened i/o
0m 09.69s: got media type 15
0m 10.08s: got disc type 0
0m 10.09s: got max lba 23588223
0m 11.08s: type Blu-ray BDMV
0m 11.08s: volume label DESPICABLE_ME_3D
0m 12.53s: aacs 1 bd+ 0
0m 29.88s: Java protection is removed by StealthyClone anti-protection.
0m 29.92s: got discinfo
0m 30.03s: got bdmv
0m 30.05s: Vendor: PIONEER
0m 30.05s: Product: BD-RW BDR-205
0m 30.05s: Revision: 1.03
0m 30.05s: Vendor specific: 09/09/11 PIONEER
0m 30.05s: AACS version: 1
0m 30.05s: Number of concurrent AGIDs: 1
0m 30.05s: Supports bus encryption: NO
0m 30.05s: Supports binding nonce generation: YES
0m 30.05s: Supports Hybrid discs: NO
0m 30.94s: got agid 0
0m 31.01s: sent host cert chal
0m 31.03s: got drive cert chal
0m 31.03s: BEC 0
0m 31.03s: DRIVE_VENDOR 0x0067
0m 31.08s: got drive key
0m 31.42s: got host key signature
0m 31.42s: verified drive signature
0m 31.44s: verified host signature
0m 31.48s: sent host signature and key point
0m 31.48s: got bus key
0m 31.51s: got agid 0
0m 31.58s: sent host cert chal
0m 31.59s: got drive cert chal
0m 31.59s: BEC 0
0m 31.59s: DRIVE_VENDOR 0x0067
0m 31.64s: got drive key
0m 31.64s: got host key signature
0m 31.64s: verified drive signature
0m 31.65s: verified host signature
0m 31.70s: sent host signature and key point
0m 31.70s: got bus key
0m 32.34s: got volume id
0m 32.34s: got volume id mac
0m 32.34s: volume id is correct
0m 32.34s: got vid
0m 32.53s: blu-ray 85D88DCF71643EF21D81F3B26F10D0B1E06AD7F4
0m 33.09s: cert BEE=0x00 same
0m 33.46s: D 80F49B9F
0m 33.46s: got vuk
0m 33.74s: got unit key 7
0m 48.63s: got extended bdinfo
0m 48.63s: opened blu-ray

DVDFab 8.2.1.5 (2012/11/12 15:48:59)

0m 00.96s: GPUAccelerate: 12351
0m 00.96s: CUDA cap: 1
0m 00.96s: Support coreavc decode: 0
0m 00.96s: Graphics info: NVIDIA GeForce GTX 570 : 4.20 : 2.0
0m 00.96s: Qt Translator file load success
0m 00.99s: Load config successful.
0m 00.99s: Init profile data driver sucessful.
0m 02.93s: Init GPU settings sucessful.
0m 02.93s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 0 bd2dvd 0 file2dvd 1 file2bluray 1 file2mobile 0 filemover 0
0m 02.93s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 03.16s: Config ExBar successful.
0m 03.16s: dvd2dvd have 8 elements.
0m 03.29s: dvd2mobile have 32 elements.
0m 04.08s: blu-ray2blu-ray have 4 elements.
0m 04.11s: blu-ray2mobile have 21 elements.
0m 04.63s: blu-ray23d have 7 elements.
0m 04.63s: blu-ray2dvd have 1 elements.
0m 04.63s: file2mobile have 31 elements.
0m 04.64s: file2dvd have 1 elements.
0m 04.66s: file2bluray have 1 elements.
0m 04.94s: Config work ui controls successful.
0m 06.55s: Init burn engine successful.
0m 06.63s: StartNotify successful.
0m 06.63s: opening drive I
0m 06.63s: opened i/o
0m 06.63s: got media type 2
0m 06.63s: got disc type 0
0m 06.63s: got max lba 171035
0m 06.64s: opening drive K
0m 06.64s: opened i/o
0m 06.64s: got media type 15
0m 07.24s: got disc type 0
0m 07.24s: got max lba 23588223
0m 08.14s: type Blu-ray BDMV
0m 08.14s: volume label DESPICABLE_ME_3D
0m 08.18s: aacs 1 bd+ 0
0m 11.62s: Java protection is removed by StealthyClone anti-protection.
0m 11.69s: got discinfo
0m 11.84s: got bdmv
0m 11.86s: Vendor: PIONEER
0m 11.86s: Product: BD-RW BDR-205
0m 11.86s: Revision: 1.03
0m 11.86s: Vendor specific: 09/09/11 PIONEER
0m 11.86s: AACS version: 1
0m 11.86s: Number of concurrent AGIDs: 1
0m 11.86s: Supports bus encryption: NO
0m 11.86s: Supports binding nonce generation: YES
0m 11.86s: Supports Hybrid discs: NO
0m 11.86s: got agid 0
0m 11.94s: sent host cert chal
0m 11.95s: got drive cert chal
0m 11.95s: BEC 0
0m 11.95s: DRIVE_VENDOR 0x0067
0m 12.00s: got drive key
0m 12.34s: got host key signature
0m 12.34s: verified drive signature
0m 12.34s: verified host signature
0m 12.40s: sent host signature and key point
0m 12.40s: got bus key
0m 12.42s: got agid 0
0m 12.50s: sent host cert chal
0m 12.50s: got drive cert chal
0m 12.50s: BEC 0
0m 12.50s: DRIVE_VENDOR 0x0067
0m 12.56s: got drive key
0m 12.56s: got host key signature
0m 12.56s: verified drive signature
0m 12.56s: verified host signature
0m 12.61s: sent host signature and key point
0m 12.61s: got bus key
0m 13.26s: got volume id
0m 13.26s: got volume id mac
0m 13.26s: volume id is correct
0m 13.26s: got vid
0m 13.45s: blu-ray 85D88DCF71643EF21D81F3B26F10D0B1E06AD7F4
0m 14.03s: cert BEE=0x00 same
0m 14.42s: D 80F49B9F
0m 14.42s: got vuk
0m 14.67s: got unit key 7
0m 29.55s: got extended bdinfo
0m 29.55s: opened blu-ray

speedinbk

THIS IS THE 2D DISC THAT I JUST SUCCESSFULLY DID A BACK UP ON:

DVDFab 8.2.1.8 (2012/11/16 19:26:25)

0m 01.45s: GPUAccelerate: 12351
0m 01.45s: CUDA cap: 1
0m 01.45s: Support coreavc decode: 0
0m 01.45s: Graphics info: NVIDIA GeForce GTX 570 : 4.20 : 2.0
0m 01.45s: Qt Translator file load success
0m 01.48s: Load config successful.
0m 01.48s: Init profile data driver sucessful.
0m 03.47s: Init GPU settings sucessful.
0m 03.47s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 0 bd2dvd 0 file2dvd 1 file2bluray 1 file2mobile 0 filemover 0
0m 03.47s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 03.71s: Config ExBar successful.
0m 03.71s: dvd2dvd have 8 elements.
0m 03.83s: dvd2mobile have 32 elements.
0m 04.66s: blu-ray2blu-ray have 4 elements.
0m 04.69s: blu-ray2mobile have 21 elements.
0m 05.22s: blu-ray23d have 7 elements.
0m 05.22s: blu-ray2dvd have 1 elements.
0m 05.22s: file2mobile have 31 elements.
0m 05.24s: file2dvd have 1 elements.
0m 05.25s: file2bluray have 1 elements.
0m 05.53s: Config work ui controls successful.
0m 09.25s: Init burn engine successful.
0m 09.31s: StartNotify successful.
0m 09.32s: opening drive I
0m 09.32s: opened i/o
0m 09.32s: got media type 2
0m 09.32s: got disc type 0
0m 09.32s: got max lba 171035
0m 32.55s: opening drive K
0m 32.57s: opened i/o
0m 32.58s: got media type 15
0m 32.97s: got disc type 0
0m 32.97s: got max lba 21124319
0m 34.20s: type Blu-ray BDMV
0m 34.20s: volume label AMERICAN_PIE_DOM
0m 35.69s: aacs 1 bd+ 0
0m 48.24s: Java protection is removed by StealthyClone anti-protection.
0m 48.33s: got discinfo
0m 48.49s: got bdmv
0m 48.52s: Vendor: PIONEER
0m 48.52s: Product: BD-RW BDR-205
0m 48.52s: Revision: 1.03
0m 48.52s: Vendor specific: 09/09/11 PIONEER
0m 48.52s: AACS version: 1
0m 48.52s: Number of concurrent AGIDs: 1
0m 48.52s: Supports bus encryption: NO
0m 48.52s: Supports binding nonce generation: YES
0m 48.52s: Supports Hybrid discs: NO
0m 48.52s: got agid 0
0m 48.60s: sent host cert chal
0m 48.61s: got drive cert chal
0m 48.61s: BEC 0
0m 48.61s: DRIVE_VENDOR 0x0067
0m 48.66s: got drive key
0m 49.67s: got host key signature
0m 49.69s: verified drive signature
0m 49.69s: verified host signature
0m 49.74s: sent host signature and key point
0m 49.74s: got bus key
0m 49.75s: got agid 0
0m 49.83s: sent host cert chal
0m 49.85s: got drive cert chal
0m 49.85s: BEC 0
0m 49.85s: DRIVE_VENDOR 0x0067
0m 49.89s: got drive key
0m 49.89s: got host key signature
0m 49.89s: verified drive signature
0m 49.89s: verified host signature
0m 49.95s: sent host signature and key point
0m 49.95s: got bus key
0m 50.59s: got volume id
0m 50.59s: got volume id mac
0m 50.59s: volume id is correct
0m 50.61s: got vid
0m 50.73s: blu-ray AF0122D6222A606231295442168F8535152A17F6
0m 51.25s: cert BEE=0x00 same
0m 51.65s: D EC1AD246
0m 51.65s: got vuk
0m 51.90s: got unit key 7
1m 19.97s: got extended bdinfo
1m 19.97s: opened blu-ray
1m 20.45s: opening folder K:/BDMV/
1m 21.48s: got bdmv
1m 54.35s: user cancelled
1m 54.35s: failed to open 1
5m 01.19s: Blu-ray Copy: Main Movie
5m 01.19s: Source: K:/BDMV/
5m 01.19s: Playlist: 801
5m 01.19s: Chapters: 1 -> 19
5m 01.19s: TotalSize: 25101 MB
5m 01.19s: SourceSize: 23774 MB
5m 01.19s: RemoveHDAudio: 0
5m 01.19s: CompressToAC3: 0
5m 01.19s: OutputSize: 23866 MB
5m 01.19s: OutputDisc: BDMV
5m 01.19s: OutputTarget: BD25
5m 01.19s: OutputVideo: 1080p/i
5m 01.19s: info: enable bd copy(mode=0)
5m 01.21s: info: video encode mode(0), bitrate(29550), lr-encode(yes)
5m 01.21s: info: streams(4113.2)
5m 01.21s: info: blu-ray copy begin (unit[elem[atomic[00802.m2ts],atomic[00811.m2ts],atomic[00803.m2ts],atomic[00812.m2ts],atomic[00804.m2ts],atomic[00813.m2ts],atomic[00805.m2ts],atomic[00814.m2ts]]])
5m 01.21s: Lightning-Recoding (accelerate H.264 software decoding and encoding) enabled
5m 01.24s: info: enable multi-thread software decoder
5m 02.28s: info: h264_encode: encode param profile(2) level(41) bitrate(29550)
5m 06.34s: info: processing source(00802.m2ts)
9m 48.30s: info: processing source(00811.m2ts)
12m 10.47s: info: processing source(00803.m2ts)
20m 39.96s: info: processing source(00812.m2ts)
23m 26.42s: info: processing source(00804.m2ts)
28m 00.19s: info: processing source(00813.m2ts)
28m 26.01s: info: processing source(00805.m2ts)
52m 52.61s: info: processing source(00814.m2ts)
53m 40.19s: info: group(elem[atomic[00802.m2ts],atomic[00811.m2ts],atomic[00803.m2ts],atomic[00812.m2ts],atomic[00804.m2ts],atomic[00813.m2ts],atomic[00805.m2ts],atomic[00814.m2ts]]) playtime(5737645 ms) source(25101 MB) request(23627 MB) real(23445 MB) bitrate(29550 kbps)
53m 40.21s: compress finished: groups request(23627 MB, 23627 MB) real(23445 MB) average_bitrate(29550 kbps)
54m 30.68s: opening folder G:/MainMovie/AMERICAN_PIE_DOM/BDMV/
54m 30.71s: got bdmv
54m 30.89s: got extended bdinfo
54m 33.53s: opening drive K
54m 33.63s: opened i/o
54m 33.64s: got media type 16
54m 33.64s: got disc type 0
54m 33.66s: got max lba 0
54m 33.67s: failed to open 0

glenns

Your burning from a folder that has a full disk or main movie not a ISO so the rules are different now you must use the Fab burning engine and not img burn and you have to mount the minsto file to Virtual drive this is not how i asked you to do it because the extra steps and extra program needed (virtual drive).

Look at my second log file it says the name of the movie then it says iso that's what you should have made when you put the disk onto the computer were is the burn file to this job when you made the iso? If you keep the 3d movie a ISO all the way it's so much easier.Did you play the disks you made on a 3d player? The logs looks like they burnt the disk but it may not play in 3d.When you insert the disk in the computer look at computer in windows then look at your blu ray drive does windows see the disk, list the title and how big it is? This will tell you whats on the disk if anything and how many gigs.

Now i am going to repeat my post again pay attention to the source and target at each step.To change target to iso you click the hand holding a blu disk to the right of the target box now the choice changes to iso you do this after you place the store brought disk into fab select main movie change target from your blu ray drive to iso by clicking the hand holding the blu ray to the right of the target box now it will make a iso from the disk to the hard drive and when done close fab and look at the fab folders under iso or clone their you will see the movie title and iso after the title so now you have a iso and that's what you use to make a 3d movie and you can use fab or img burn to burn the disk that you set up in settings they both work fine when burning a 3d ISO.

Please make a ISO of the 3d blu ray first step 1 shows you how.

1-in blu ray copy select CLONE insert 3d blu ray store brought disk in blu ray drive.Source will be your blu ray drive, target change to dvdfab iso folder this is a clone folder in dvd fabs files and is where you will look for it later.
Press start this will copy the disk exactly to your hard drive as a iso should take about 50 mins. or so to do when done disk is ejected and you click on finish and close fab.Now in the next step you will make the 3d disk from the Iso(clone) folder in fab you just made.

2-Now open fab blu ray copy click on main movie go into fabs files and find the iso you just made in the clone file folder drag the file into fab.Put a 25 gig disk into blu ray drive.Target is your blu ray drive, source is the file you just dragged into fab.Here you take out anything you don't want but leave the English dts master pre checked file or whatever master audio file is checked.Now below theirs a hd audio box you can check to take out the hd audio only do this if you don't want this soundtrack or to make the file fit on a 25 gig disk without trans coding the movie that's the very long process of reducing the file to fit on a 25 gig disk.Now theirs a box to check on the bottom that says 50 gig and has a pull down box to the right, pull down this box and click on 25 gig fab will do the math if the disk doesn't need to be reduced fab will make a temporary file with the instructions you just gave it after that file is made about 20-30 Min's if the file need no compression it will go right to the burn and burn the temporary folder.If fab needs to reduce the file it can take 13 hours on a dual core computer less for 4 core computers then after if does the compress it does the burn.Their are other ways to do this but this is the easy way

glenns

speedinbk

Ok looks like you made a iso with the second set of logs you posted but i don't see a burn log for them.Anyway from the burn logs you posted it looks to me like fab did the burn their are no read errors or codes, your burner is ok because you burned a blu ray and your disk is ok because you used the same rewritable disk.Whats left is after you made the 3d disk what did you play it on to see if it would play? I have had the program act as if and go through the entire process as if burning only to have just the title of the movie on the disc and the rest of the disc is completley empty.

Did you see if you can play it in 2d on your computer using a software player?
Yes, that's how I realized that the discs were not actually burning. After putting them in my Panasonic Blu Ray palyer and nothing happend I put the disc back in the computer and looked at the properties of the disc only to see the title of the movie and the rest of the disc was blank 22.5GB free space

Did you try it on a PlayStation or did you try it on another blu ray 3d player? Some players are getting a black screen when playing some newer disks so what are you using? Can the computer play it with software player? I can play the ISO on the DVDfab player without issue, so the file is there and in working order. For some reason I can't get the 3D file to burn onto disc. 2D files have no issue. Keep in mind, the cloned file is to big to fit onto the 25GB disc so I go back in and take audio out and other things not needed on the disc. After I do this is goes through a 1hr and 30min process and looks as if it is going to burn to disc, but never does.
Power dvd needs you to mount the movie in virtual drive to work.You can test it in fabs preview player like i told you open fab to main movie insert disk press play on fabs mini viewer and see if it plays in 2d their.

glenns

speedinbk

Do you have a 25 gig regular non rewritable you can try as i told you everything i could think of. I used a Philips rewritable disk when i burned a 3d disk for you yesterday maybe for some reason the brand of disks you are using won't work but i can't figure why.What brand were you using? yes I am getting ready to try the non rewritable shortly. I have to wait for the file size to process from the full size "clone" ISO to a size that will fit on the 25GB standard Blu Ray disc, I have about 40min left to process. I was using Sony rewritables

Can you burn any other 3d movies on these disks?I've never been able to burn any 3d title to a blu ray, but I can burn 2D blu rays to them all day long

can you take your burned disks and see if they will play on a friends 3d player as the log files said the burn went ok and completed. Take my word for it, even though the log file said the disc was burned, outside of the title being on the disc it is blank. As I'm sure you may have picked up already, I'm not a novice with a computer. I own a professional video company in my city, so knowing how to touble shoot or taking direction from people helping me with software is not a problem.

Maybe Willson can take a look at the burn files and see something i didn't that can cause fab to report the burn went well but theirs no files on the disk only the title of the movie.I am not a expert on reading files.

One other thing the log file says( ice age 3d bundle) that disk was bundled with new tv's and not a regular mass release disk and that may be why your having trouble with this disk please try another 3d disk.After Ice Age started giving me trouble, I thought along the same line as you and decided to try and back up the Disney movie "Tangled 3d", and my results so far have been identical. It is the movie that I will be trying to burn to the standard Blu Ray

speedinbk

I may be on to something. This is the first time I've tried to pull the project into Image Burn and brun the disc through that program. It seems to want to work even with the rewritables, but I'm haveing a single prolem. Even after taking every bit of audio and checking the remove HD audio and making an ISO of the main movie only, Image Burn is telling me that the file size is to big

"There doesn't appear to be enough space on the disc to burn this image."
Image size 12,338,560 sectors (24,803 MB)
Disc size 22,826,176 sectors (23,098 MB)

Its asking if I want to "overburn" or "write until end of disc"

any ideas of how to make it just a little smaller?

glenns

Yes three ways: You can let img burn burn to the end of disk and the movie will copy till the end of the disk this cuts off the ending but if this is a rewritable disk that's ok your just doing a test disk to see if it works it may just cut the 5 min. ending credits most movies have if your lucky.

#2 You can in main movie record from chapter numbers say the movie has 23 chapters you can have fab record only lets say from chapter 1 to chapter 22 this will also cut the ending and make the disk a little smaller and you can use the small movie previewer in fab to see where in the movie the chapter will end so if it's just going to remove the end credits you can do this.Your really doing the same thing when you burn to end of disk with img burn but you will know where the cut out chapter starts thus knowing where your disk will end when cutting chapters using fab.Use the pull down where it says chapters their you will see how many chapters the movie has and you can change the number of chapters to record by deleting the last chapter then you can use the mini viewer to see your movie without the last chapter to see where it now ends.

#3 You can use fab to do the compression from 50 gig disk reducing to 25 gig disk this takes a long time but with most 3d movies you need to do it as they have a lot of data in them.If your talking about a short film or a 3d Imax movie they are about a hour or so they will fit on a 25 gig disk without compression like your trying to do.Their are only a few of all released 3d movies that you don't need to compress.

« Previous Page Next Page »