I have three blue ray drives and they all do the same exact thing. Pioneer BDR-2208, BDR-207 both SATA and my Samsung SE-506AB. No matter what disc I am reading...no matter what drive reads it...they just stop. I took a couple of screen shots. Once the read speed drops to 0, the program no longer shows it....just the % read. It will sit there for an hour if I let it. Can't seem to read anything that requires decrypting or shrinking. Turned off CUDA and same result. New Nvidia drivers 310.61/64. No joy and no success with version 8.2.2.2 either.... What can it be???? Windows 8

bobmitch, post an internal log that might tell the story.

That's the odd part...when I go into Users\Username\My Documents\DVDFab\Log... There is NOTHING in there. No log, nothing....I don't get any of this. It starts to read the disc normally and then stops at 11.64%. Read speed drops to 0 and nothing else happens. No log, no errors, nothing BTW...I am running Intel Rapid Storage drivers 11.6 (the latest). My OS drive is a Samsung 830 SSD, and my D drive is a 1 TB 7200 rpm Hitachi. In the program setup, I created temp directories on the D drive for DVDFab to cache it's files...but still should have no bearing. The program worked for years on Windows 7...but somehow...not on 8.

OK...I started a copy straight to my hard drive and it still locks at 11.61%. I can never rip (when having to shrink down the size)...Cars, for example is 27GB and has to shrink down to 22GB to fit a BD25. It works normally until 11.61%, then the read speed drops to 0 and the program just sits there. I have to cancel and finish...nothing ever gets done...whether 9.0.1.1 or 8.2.2.2, same for both. There is obviously something going on. Read the log that it created and see nothing...maybe you can...DVDFab is totally unusable on my system with Windows 8...

Can you clone a disk to a folder or an ISO without problem? Looking at your log file shows me it is still trying to use your GPU for encoding. [code] 7m 17.36s: Blu-ray Copy: Main Movie 7m 17.36s: Source: E:/BDMV/ 7m 17.36s: Playlist: 52 7m 17.36s: Chapters: 1 -> 32 7m 17.36s: TotalSize: 27861 MB 7m 17.36s: SourceSize: 27861 MB 7m 17.36s: RemoveHDAudio: 0 7m 17.36s: CompressToAC3: 0 7m 17.36s: OutputSize: 23000 MB 7m 17.36s: OutputDisc: BDMV 7m 17.36s: OutputTarget: BD25 7m 17.36s: OutputVideo: 1080p/i 7m 17.36s: info: enable bd copy(mode=0) 7m 17.36s: info: video encode mode(0), bitrate(17314), lr-encode(no) 7m 17.36s: info: streams(4113.2) 7m 17.36s: info: blu-ray copy begin (unit[elem[atomic[00060.m2ts]]]) 7m 17.36s: try to use gpu acceleration(1) for video decoding 7m 17.36s: CUDA GPU acceleration for video decoding enabled 7m 18.39s: GPU acceleration for video encoding enabled 7m 18.39s: info: h264_encode: encode param profile(2) level(41) bitrate(17314) 7m 21.41s: info: processing source(00060.m2ts)[/code] Not sure how you disabled it (nvidia drivers or within DVDFAB or both?) but try again and open the log file as soon as it is started to make sure its not using GPU and is software only transcoding. Also make sure you have plenty of disk space where you have set DVDFAB to use as temp.

The problem I have is that I can't get DVDFab to read any disc past 11.61%. I will disable GPU and go with straight software, which I have tried with no success. Let me see if it will generate a new log... OK...this is what I get when I disable CUDA and keep everything strictly software. I did an upgrade to Windows 8, and everything works fine...except DVDFab and Nero Discspeed, which now only recognizes one of my drive, not both Pioneers...odd stuff... I have filled out about 5-6 of these error reports and sent. Even emailed tech support...no joy!

Not that it has anything to do with Blu Ray Copy, but I was able to copy a DVD, successfully. Must be something to do with 9.0.1.1 and it's BR ability. Odd thing...8.2.1.8 functioned normally on Windows 8 until I installed v9. Did 9 break 8?

Please don't wait for hours at the same percentage. If the number doesn't advance at all after 10-15 minutes, there's a problem.

OK, so I let it go for just over an hour...had other things to do and forgot it was still going. When I came back....was still stuck in the same place. The ability to do a DVD tells me that maybe there is an issue with the Blu Ray copy part. The first time I used it, I was able to get the read part to 100% and nothing happened after that. Then, since, I can't get past 11.61%. Something very problematic here. As I stated earlier...I was using 8.2.1.8 fine, even in Windows 8, until I installed 9. Now both don't work right...for BD

This is starting to sound like a pooched install to me. Try uninstalling both versions and running ccleaner on the registry until it doesn't find any errors. It took four times on my W8 machine.

[QUOTE=90312;128106]This is starting to sound like a pooched install to me. Try uninstalling both versions and running ccleaner on the registry until it doesn't find any errors. It took four times on my W8 machine.[/QUOTE] Thought you might be on to something. Uninstalled both and ran ccleaner. Then I cleaned out my registry of everything DVDFab. Reinstalled only 9.0.1.1 and tried to copy Cars again. Read speed was actually up to close to 12mb/s which was a big improvement...things moved along and stalled at 11.77% and then just sat there. Cancelled and going back to the drawing board... Here is my last log: DVDFab 9.0.1.1 (2012/11/28 20:40:30) 0m 00.15s: GPUAccelerate: 12351 0m 00.15s: CUDA cap: 1 0m 00.15s: Support coreavc decode: 0 0m 00.15s: Graphics info: NVIDIA GeForce GTX 580 : 5.0 : 2.0 0m 00.15s: Qt Translator file load success 0m 00.17s: Start get sys number. 0m 00.17s: Serial number is: c8-60-00-c9-6a-5c 0m 00.17s: Reg URL link is: 0m 00.17s: Version is: 9011 0m 00.17s: Product is: 2 0m 00.17s: Connect type is: 0 0m 00.87s: Times of connecting error is: 0 0m 00.87s: Parse string is: 2:1419226165 0m 00.87s: Parse string is: 20:1419226165 0m 00.87s: Parse string is: 60:1419213865 0m 00.87s: Parse string is: OV:9011 0m 00.87s: Parse string is: BV:9008 0m 00.87s: Parse string is: S:ea93883ebf603c2dd3c8598671a9a580 0m 01.17s: End check info. 0m 01.17s: Load config successful. 0m 01.23s: Init profile data driver sucessful. 0m 01.28s: Init GPU settings sucessful. 0m 01.28s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1 0m 01.29s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray: 0m 04.48s: Init burn engine successful. 0m 04.54s: opening drive E 0m 04.55s: opened i/o 0m 04.56s: got media type 15 0m 05.06s: got disc type 0 0m 05.06s: got max lba 20206815 0m 06.35s: type Blu-ray BDMV 0m 06.35s: volume label 18020466_CARS_USA 0m 06.42s: opening drive F 0m 06.49s: opened i/o 0m 06.49s: got media type 16 0m 06.50s: got disc type 0 0m 06.50s: got max lba 0 0m 07.57s: aacs 1 bd+ 0 0m 10.21s: Java protection is removed by StealthyClone anti-protection. 0m 10.27s: got discinfo 0m 10.57s: got bdmv 0m 10.59s: Vendor: PIONEER 0m 10.59s: Product: BD-RW BDR-207D 0m 10.59s: Revision: 1.30 0m 10.59s: Vendor specific: 12/09/05 PIONEER 0m 10.59s: AACS version: 1 0m 10.59s: Number of concurrent AGIDs: 1 0m 10.59s: Supports bus encryption: YES 0m 10.60s: Supports binding nonce generation: YES 0m 10.60s: Supports Hybrid discs: NO 0m 10.61s: got agid 0 0m 10.69s: sent host cert chal 0m 10.70s: got drive cert chal 0m 10.70s: BEC 1 0m 10.70s: DRIVE_VENDOR 0x0067 0m 10.75s: got drive key 0m 10.75s: got host key signature 0m 10.75s: verified drive signature 0m 10.76s: verified host signature 0m 10.81s: sent host signature and key point 0m 10.81s: got bus key 0m 10.84s: got agid 0 0m 10.91s: sent host cert chal 0m 10.92s: got drive cert chal 0m 10.93s: BEC 1 0m 10.93s: DRIVE_VENDOR 0x0067 0m 10.97s: got drive key 0m 10.98s: got host key signature 0m 10.98s: verified drive signature 0m 10.98s: verified host signature 0m 11.03s: sent host signature and key point 0m 11.04s: got bus key 0m 11.04s: got volume id 0m 11.04s: got volume id mac 0m 11.04s: volume id is correct 0m 11.04s: got vid 0m 11.23s: blu-ray 59996671AB3F7FD95D39A48B04D4CE52B13F2073 0m 11.77s: cert BEE=0x00 same 0m 13.18s: D 68108922 0m 13.19s: got vuk 0m 13.21s: got agid 0 0m 13.28s: sent host cert chal 0m 13.30s: got drive cert chal 0m 13.30s: BEC 1 0m 13.30s: DRIVE_VENDOR 0x0067 0m 13.35s: got drive key 0m 13.35s: got host key signature 0m 13.36s: verified drive signature 0m 13.36s: verified host signature 0m 13.42s: sent host signature and key point 0m 13.42s: got bus key 0m 13.43s: got data key 0m 13.71s: got unit key 1 0m 41.47s: got extended bdinfo 0m 41.47s: opened blu-ray 0m 41.49s: opening drive F 0m 41.56s: opened i/o 0m 41.56s: got disc type 0 0m 41.57s: got max lba 0 1m 14.24s: Burn data size is: 23000 1m 14.24s: Burn disc space is: 23866 3m 06.14s: Blu-ray Copy: Main Movie 3m 06.14s: Source: E:/BDMV/ 3m 06.14s: Playlist: 52 3m 06.14s: Chapters: 1 -> 32 3m 06.14s: TotalSize: 27861 MB 3m 06.14s: SourceSize: 27861 MB 3m 06.14s: RemoveHDAudio: 0 3m 06.14s: CompressToAC3: 0 3m 06.14s: OutputSize: 23000 MB 3m 06.14s: OutputDisc: BDMV 3m 06.15s: OutputTarget: BD25 3m 06.15s: OutputVideo: 1080p/i 3m 06.15s: info: enable bd copy(mode=0) 3m 06.15s: info: video encode mode(0), bitrate(17314), lr-encode(no) 3m 06.15s: info: streams(4113.2) 3m 06.15s: info: blu-ray copy begin (unit[elem[atomic[00060.m2ts]]]) 3m 06.15s: try to use gpu acceleration(1) for video decoding 3m 06.15s: CUDA GPU acceleration for video decoding enabled 3m 07.17s: GPU acceleration for video encoding enabled 3m 07.17s: info: h264_encode: encode param profile(2) level(41) bitrate(17314) 3m 10.19s: info: processing source(00060.m2ts)

No matter what BR I copy, they stop at 11.64% read and sit for hours

bobmitch

8.2.2.2 stops at 11.77%, 8.2.2.0 stops at 11.77%, 8.2.1.8 stops at 11.77%.

This did not happen before I installed v9. I did a copy of "To Kill a Mockingbird" on Win 8 with 8.2.1.8 last week. Then updated 8 to 8.2.2.2 and added v9. One other thing I can try...let me backtrack and reinstall Intel AHCI drivers 11.2 instead of 11.6

bobmitch

well that was a bad idea. Windows 8 doesn't like to roll drivers back. Now I can no longer acccess windows 8

bobmitch

OK...couldn't even get Win 8 to go to Safe Mode to recover...so I recovered from an earlier backup to Windows 7 and 9.0.1.1 just popped up a message at 11.41% that FabCore has stopped working! Guess what...the read to the drive stopped and just sits there like it does in Windows 8. Here is the report:

Problem signature:
Problem Event Name: APPCRASH
Application Name: fabcore.exe
Application Version: 1.0.5.1
Application Timestamp: 50acb789
Fault Module Name: codecs.dll
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 4e1eb600
Exception Code: c0000005
Exception Offset: 00070603
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789

So in reality, the crash happens in Windows 7 with a report, where in Windows 8, you get no such report...the program just looks like it stalls....

bobmitch

Currently, I never updated v8 on the desktop and running 8.2.0.0 and it's doing the job. No freezing, nothing. Here is a snapshot of the progress...well beyond 11.41%

Perhaps it's not my machine...but the later builds of DVDFab

bobmitch

Tried 9.0.1.1 again on Win 7...stopped converting at 11.43%. There is definately something different about the newer versions. 8.2.0.0 finished reading and did the burn!

shanecnz

Out of interest, can you post the log file from 8.2.0.0, I'm interested to see if it was using GPU to decode/encode.

bobmitch

Screenshot from 8.2.0.0 and some of the log right here

DVDFab 8.2.0.0 (2012/11/29 01:54:33)

0m 01.10s: GPUAccelerate: 12351
0m 01.11s: CUDA cap: 1
0m 01.11s: Support coreavc decode: 0
0m 01.11s: Graphics info: NVIDIA GeForce GTX 580 : 5.0 : 2.0
0m 01.11s: Qt Translator file load success
0m 01.14s: Load config successful.
0m 01.19s: Init profile data driver sucessful.
0m 02.63s: Init GPU settings sucessful.
0m 02.63s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 02.64s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 02.77s: Config ExBar successful.
0m 02.78s: dvd2dvd have 8 elements.
0m 02.86s: dvd2mobile have 32 elements.
0m 03.36s: blu-ray2blu-ray have 4 elements.
0m 03.38s: blu-ray2mobile have 21 elements.
0m 03.70s: blu-ray23d have 7 elements.
0m 03.79s: blu-ray2dvd have 1 elements.
0m 03.81s: file2mobile have 31 elements.
0m 04.30s: file2dvd have 1 elements.
0m 04.32s: file2bluray have 1 elements.
0m 04.52s: Config work ui controls successful.
0m 04.76s: Init burn engine successful.
0m 04.78s: StartNotify successful.
0m 04.78s: opening drive E
0m 04.79s: got media type 15
0m 05.28s: got max lba 20206815
0m 06.55s: type Blu-ray BDMV
0m 06.55s: volume label 18020466_CARS_USA
0m 06.64s: opening drive F
0m 06.73s: got media type 16
0m 06.74s: got max lba 0
0m 07.71s: aacs 1 bd+ 0
0m 11.60s: Java protection is removed by StealthyClone anti-protection.
0m 11.67s: got discinfo
0m 11.82s: got bdmv
0m 11.84s: Vendor: PIONEER
0m 11.84s: Product: BD-RW BDR-207D
0m 11.84s: Revision: 1.30
0m 11.84s: Vendor specific: 12/09/05 PIONEER
0m 11.84s: AACS version: 1
0m 11.84s: Number of concurrent AGIDs: 1
0m 11.85s: Supports bus encryption: YES
0m 11.85s: Supports binding nonce generation: YES
0m 11.85s: Supports Hybrid discs: NO
0m 11.87s: got agid 0
0m 11.94s: sent host cert chal
0m 11.96s: got drive cert chal
0m 11.96s: BEC 1
0m 11.96s: DRIVE_VENDOR 0x0067
0m 12.01s: got drive key
0m 12.35s: got host key signature
0m 12.35s: verified drive signature
0m 12.36s: verified host signature
0m 12.41s: sent host signature and key point
0m 12.41s: got bus key
0m 12.44s: got agid 0
0m 12.51s: sent host cert chal
0m 12.53s: got drive cert chal
0m 12.53s: BEC 1
0m 12.53s: DRIVE_VENDOR 0x0067
0m 12.58s: got drive key
0m 12.58s: got host key signature
0m 12.58s: verified drive signature
0m 12.58s: verified host signature
0m 12.64s: sent host signature and key point
0m 12.64s: got bus key
0m 12.65s: got volume id
0m 12.65s: got volume id mac
0m 12.65s: volume id is correct
0m 12.65s: got vid
0m 12.82s: blu-ray 59996671AB3F7FD95D39A48B04D4CE52B13F2073
0m 13.36s: cert BEE=0x00 same
0m 14.73s: D 68108922
0m 14.74s: got vuk
0m 14.76s: got agid 0
0m 14.83s: sent host cert chal
0m 14.85s: got drive cert chal
0m 14.85s: BEC 1
0m 14.85s: DRIVE_VENDOR 0x0067
0m 14.91s: got drive key
0m 14.91s: got host key signature
0m 14.91s: verified drive signature
0m 14.91s: verified host signature
0m 14.97s: sent host signature and key point
0m 14.97s: got bus key
0m 14.98s: got data key
0m 15.24s: got unit key 1
0m 43.17s: got extended bdinfo
0m 43.17s: opened blu-ray
1m 03.31s: Blu-ray Copy: Main Movie
1m 03.31s: Source: E:/BDMV/
1m 03.31s: Playlist: 52
1m 03.31s: Chapters: 1 -> 32
1m 03.31s: TotalSize: 27861 MB
1m 03.31s: SourceSize: 27861 MB
1m 03.31s: RemoveHDAudio: 0
1m 03.31s: CompressToAC3: 0
1m 03.31s: OutputSize: 46100 MB
1m 03.31s: OutputDisc: BDMV
1m 03.31s: OutputTarget: BD50
1m 03.33s: OutputVideo: 1080p/i

shanecnz

Ok that was a main movie only with no compression, thus the GPU wasn't touched and its not the same test as what you were doing with 9.0.1.1

Repeat what you were doing with 9.0.1.1 (copying a 50 to 25) using the 8.2.x.x and see if it stalls @ ~ 11%

bobmitch

Reinstalled my Win 8 and ran 8.2.2.0 Pooped out at 11.63% and just sat there. Had to cancel and close the program. In Win 7, I was running Nvidia GeForce 304 drivers. On Win 8, I am running 310.64. I have to believe that there are issues with DVDFab and the latest iterations of CUDA.

At this point, I am pretty dead in the water with DVDFab...just have to wait out newer versions and hope for the best...otherwise, I will install it on my laptop, which is still on Win 7 and see what happens. No CUDA there, for my GPU is an AMD 6850

bobmitch

I am bumping this up for the sake of DVDFab tech support employees. I cannot communicate back and forth via email, for they get returned to me undeliverable. So I am trying to make tech support read this thread. There is much useful information for them, yet they keep emailing me asking for replies...

shanecnz

[QUOTE=bobmitch;128577]I am bumping this up for the sake of DVDFab tech support employees. I cannot communicate back and forth via email, for they get returned to me undeliverable. So I am trying to make tech support read this thread. There is much useful information for them, yet they keep emailing me asking for replies...[/QUOTE]

I'm not suprised they haven't responded, it's like you have attention deficit disorder you jump around trying multiple different things at once and when asked by people (like myself) who are trying to help to do specific things you do something similar but not exactly or you just ignore the posts altogether.

Really hard trying to help someone who won't at least follow instructions!

bobmitch

OK...some updated info. I can copy DVD's 100% of the time and Blu Ray 0% of the time. DVD's copy fine with or without the help of CUDA. Blu Ray, no success. When I rip to the HDD, It will read to 100%. When I go to shrink it down to fit BD25, it always stops at 11.7 or 11.8% and the program seems to go dormant. That is with both versions 9.0.1.2 and 8.2.2.2, using CUDA and without CUDA. What more info can I take a shot at?

bobmitch

OK...new Nvidia Drivers 310.70 WHQL

First trial...CUDA enabled with 9.0.1.2 Copy Failed Capture 1, shows the program doing the copy at full rip speed. Capture 2, shows 10.76% completion. Notice in the bottom left hand corner, the rip speed no longer shows and the task time remaining drops to 0.

Here is the log

DVDFab 9.0.1.2 (2012/12/04 13:25:32)

0m 00.17s: GPUAccelerate: 12351
0m 00.17s: CUDA cap: 1
0m 00.17s: Support coreavc decode: 0
0m 00.17s: Graphics info: NVIDIA GeForce GTX 580 : 5.0 : 2.0
0m 00.17s: Qt Translator file load success
0m 00.19s: Start get sys number.
0m 00.19s: Serial number is: c8-60-00-c9-6a-5c
0m 00.20s: Reg URL link is:
0m 00.20s: Version is: 9012
0m 00.20s: Product is: 2
0m 00.20s: Connect type is: 0
0m 00.86s: Times of connecting error is: 0
0m 00.86s: Parse string is: 2:1419226165
0m 00.86s: Parse string is: 20:1419226165
0m 00.87s: Parse string is: 60:1419213865
0m 00.87s: Parse string is: OV:9012
0m 00.87s: Parse string is: BV:9008
0m 00.87s: Parse string is: S:4073f47d1b87f616de88691eab0f674c
0m 01.19s: End check info.
0m 01.19s: Load config successful.
0m 01.30s: Init profile data driver sucessful.
0m 01.35s: Init GPU settings sucessful.
0m 01.36s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 01.36s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 04.63s: Init burn engine successful.
0m 04.72s: opening drive E
0m 04.73s: opened i/o
0m 04.73s: got media type 15
0m 05.23s: got disc type 0
0m 05.24s: got max lba 23880767
0m 06.44s: type Blu-ray BDMV
0m 06.44s: volume label NATIONAL_TREASURE
0m 06.51s: opening drive F
0m 06.57s: opened i/o
0m 06.58s: got media type 16
0m 06.58s: got disc type 0
0m 06.59s: got max lba 0
0m 07.72s: aacs 1 bd+ 0
0m 09.63s: Java protection is removed by StealthyClone anti-protection.
0m 09.69s: got discinfo
0m 09.93s: got bdmv
0m 09.95s: Vendor: PIONEER
0m 09.95s: Product: BD-RW BDR-207D
0m 09.95s: Revision: 1.30
0m 09.95s: Vendor specific: 12/09/05 PIONEER
0m 09.96s: AACS version: 1
0m 09.96s: Number of concurrent AGIDs: 1
0m 09.96s: Supports bus encryption: YES
0m 09.96s: Supports binding nonce generation: YES
0m 09.96s: Supports Hybrid discs: NO
0m 09.98s: got agid 0
0m 10.05s: sent host cert chal
0m 10.07s: got drive cert chal
0m 10.07s: BEC 1
0m 10.07s: DRIVE_VENDOR 0x0067
0m 10.12s: got drive key
0m 10.12s: got host key signature
0m 10.12s: verified drive signature
0m 10.12s: verified host signature
0m 10.17s: sent host signature and key point
0m 10.17s: got bus key
0m 10.20s: got agid 0
0m 10.28s: sent host cert chal
0m 10.29s: got drive cert chal
0m 10.29s: BEC 1
0m 10.29s: DRIVE_VENDOR 0x0067
0m 10.34s: got drive key
0m 10.34s: got host key signature
0m 10.34s: verified drive signature
0m 10.34s: verified host signature
0m 10.40s: sent host signature and key point
0m 10.40s: got bus key
0m 10.41s: got volume id
0m 10.41s: got volume id mac
0m 10.41s: volume id is correct
0m 10.41s: got vid
0m 10.53s: blu-ray 06D890928926D92955883CD08C0D50B17F3882DF
0m 11.02s: cert BEE=0x00 same
0m 12.35s: D F58B837C
0m 12.36s: got vuk
0m 12.38s: got agid 0
0m 12.44s: sent host cert chal
0m 12.46s: got drive cert chal
0m 12.46s: BEC 1
0m 12.46s: DRIVE_VENDOR 0x0067
0m 12.52s: got drive key
0m 12.52s: got host key signature
0m 12.52s: verified drive signature
0m 12.52s: verified host signature
0m 12.58s: sent host signature and key point
0m 12.58s: got bus key
0m 12.59s: got data key
0m 12.79s: got unit key 1
1m 27.80s: got extended bdinfo
1m 27.80s: opened blu-ray
1m 27.90s: opening drive F
1m 27.96s: opened i/o
1m 27.97s: got disc type 0
1m 27.98s: got max lba 0
2m 04.29s: Burn data size is: 23000
2m 04.30s: Burn disc space is: 23866
4m 20.32s: Blu-ray Copy: Main Movie
4m 20.32s: Source: E:/BDMV/
4m 20.32s: Playlist: 138
4m 20.33s: Chapters: 1 -> 20
4m 20.33s: TotalSize: 33315 MB
4m 20.33s: SourceSize: 33315 MB
4m 20.33s: RemoveHDAudio: 0
4m 20.33s: CompressToAC3: 0
4m 20.33s: OutputSize: 23000 MB
4m 20.33s: OutputDisc: BDMV
4m 20.33s: OutputTarget: BD25
4m 20.33s: OutputVideo: 1080p/i
4m 20.33s: info: enable bd copy(mode=0)
4m 20.34s: info: video encode mode(0), bitrate(13506), lr-encode(no)
4m 20.34s: info: streams(4113.2)
4m 20.34s: info: blu-ray copy begin (unit[elem[atomic[00136.m2ts]]])
4m 20.34s: try to use gpu acceleration(1) for video decoding
4m 20.34s: CUDA GPU acceleration for video decoding enabled
4m 21.36s: GPU acceleration for video encoding enabled
4m 21.36s: info: h264_encode: encode param profile(2) level(41) bitrate(13506)
4m 24.36s: info: processing source(00136.m2ts)

Next trial same copy with CUDA off

90312

bobmitch you're not overclocking your processor(s) are you?

bobmitch

[QUOTE=90312;128624]bobmitch you're not overclocking your processor(s) are you?[/QUOTE]

In order to run my memory at 1866, I set to XPS and the board locks my processor speed at 3.9 GHZ, my turbo speed. In the past, with Windows 7...this never caused this issue...what are you thinking?

90312

Just that I've seen others have issues, unpredictable results with OC'd CPUs. Can you back it off just for a test?

bobmitch

OK...Nvidia 310.70 WHQL and CUDA turned off. Capture 3 shows rip at full speed. Capture 4 shows failure...notice lower left hand corner, no read speed and task time left at 0. Obviously something is up.

VDFab 9.0.1.2 (2012/12/04 13:50:19)

0m 00.18s: GPUAccelerate: 12351
0m 00.18s: CUDA cap: 1
0m 00.18s: Support coreavc decode: 0
0m 00.18s: Graphics info: NVIDIA GeForce GTX 580 : 5.0 : 2.0
0m 00.18s: Qt Translator file load success
0m 00.20s: Start get sys number.
0m 00.21s: Serial number is: c8-60-00-c9-6a-5c
0m 00.21s: Reg URL link is:
0m 00.21s: Version is: 9012
0m 00.21s: Product is: 2
0m 00.21s: Connect type is: 0
0m 00.87s: Times of connecting error is: 0
0m 00.87s: Parse string is: 2:1419226165
0m 00.87s: Parse string is: 20:1419226165
0m 00.87s: Parse string is: 60:1419213865
0m 00.87s: Parse string is: OV:9012
0m 00.87s: Parse string is: BV:9008
0m 00.87s: Parse string is: S:787a9ef0d29a981ac59bd2e3fede23ac
0m 01.20s: End check info.
0m 01.20s: Load config successful.
0m 01.32s: Init profile data driver sucessful.
0m 01.37s: Init GPU settings sucessful.
0m 01.37s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 01.37s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 04.60s: Init burn engine successful.
0m 04.70s: opening drive E
0m 04.71s: opened i/o
0m 04.71s: got media type 15
0m 05.16s: got disc type 0
0m 05.16s: got max lba 23880767
0m 06.24s: type Blu-ray BDMV
0m 06.24s: volume label NATIONAL_TREASURE
0m 06.31s: opening drive F
0m 06.38s: opened i/o
0m 06.38s: got media type 16
0m 06.39s: got disc type 0
0m 06.39s: got max lba 0
0m 07.36s: aacs 1 bd+ 0
0m 07.97s: Java protection is removed by StealthyClone anti-protection.
0m 08.05s: got discinfo
0m 08.22s: got bdmv
0m 08.24s: Vendor: PIONEER
0m 08.24s: Product: BD-RW BDR-207D
0m 08.24s: Revision: 1.30
0m 08.24s: Vendor specific: 12/09/05 PIONEER
0m 08.24s: AACS version: 1
0m 08.24s: Number of concurrent AGIDs: 1
0m 08.24s: Supports bus encryption: YES
0m 08.24s: Supports binding nonce generation: YES
0m 08.24s: Supports Hybrid discs: NO
0m 08.96s: got agid 0
0m 09.04s: sent host cert chal
0m 09.05s: got drive cert chal
0m 09.05s: BEC 1
0m 09.05s: DRIVE_VENDOR 0x0067
0m 09.11s: got drive key
0m 09.11s: got host key signature
0m 09.11s: verified drive signature
0m 09.11s: verified host signature
0m 09.18s: sent host signature and key point
0m 09.18s: got bus key
0m 09.22s: got agid 0
0m 09.30s: sent host cert chal
0m 09.32s: got drive cert chal
0m 09.32s: BEC 1
0m 09.32s: DRIVE_VENDOR 0x0067
0m 09.36s: got drive key
0m 09.38s: got host key signature
0m 09.38s: verified drive signature
0m 09.38s: verified host signature
0m 09.43s: sent host signature and key point
0m 09.44s: got bus key
0m 09.44s: got volume id
0m 09.44s: got volume id mac
0m 09.44s: volume id is correct
0m 09.44s: got vid
0m 09.58s: blu-ray 06D890928926D92955883CD08C0D50B17F3882DF
0m 10.08s: cert BEE=0x00 same
0m 11.44s: D F58B837C
0m 11.44s: got vuk
0m 11.47s: got agid 0
0m 11.54s: sent host cert chal
0m 11.55s: got drive cert chal
0m 11.55s: BEC 1
0m 11.55s: DRIVE_VENDOR 0x0067
0m 11.61s: got drive key
0m 11.61s: got host key signature
0m 11.61s: verified drive signature
0m 11.61s: verified host signature
0m 11.68s: sent host signature and key point
0m 11.68s: got bus key
0m 11.69s: got data key
0m 11.88s: got unit key 1
1m 25.62s: got extended bdinfo
1m 25.62s: opened blu-ray
1m 25.72s: opening drive F
1m 25.78s: opened i/o
1m 25.80s: got disc type 0
1m 25.80s: got max lba 0
1m 52.92s: Burn data size is: 23000
1m 52.92s: Burn disc space is: 23866
4m 09.19s: Blu-ray Copy: Main Movie
4m 09.19s: Source: E:/BDMV/
4m 09.19s: Playlist: 138
4m 09.19s: Chapters: 1 -> 20
4m 09.21s: TotalSize: 33315 MB
4m 09.21s: SourceSize: 33315 MB
4m 09.21s: RemoveHDAudio: 0
4m 09.21s: CompressToAC3: 0
4m 09.21s: OutputSize: 23000 MB
4m 09.21s: OutputDisc: BDMV
4m 09.21s: OutputTarget: BD25
4m 09.21s: OutputVideo: 1080p/i
4m 09.21s: info: enable bd copy(mode=0)
4m 09.21s: info: video encode mode(0), bitrate(13506), lr-encode(no)
4m 09.21s: info: streams(4113.2)
4m 09.21s: info: blu-ray copy begin (unit[elem[atomic[00136.m2ts]]])
4m 09.22s: info: enable multi-thread software decoder
4m 10.23s: info: h264_encode: encode param profile(2) level(41) bitrate(13506)
4m 14.26s: info: processing source(00136.m2ts)

bobmitch

OK...Processor at 3.5 GHZ (i7 3770K), my memory at 1333...so nothing is clocked beyond basic.

Capture 5 shows full read speed. Capture 6 shows the failure...No read speed detected and task time left 0

DVDFab 9.0.1.2 (2012/12/04 14:15:12)

0m 00.23s: GPUAccelerate: 12351
0m 00.23s: CUDA cap: 1
0m 00.23s: Support coreavc decode: 0
0m 00.24s: Graphics info: NVIDIA GeForce GTX 580 : 5.0 : 2.0
0m 00.24s: Qt Translator file load success
0m 00.27s: Start get sys number.
0m 00.27s: Serial number is: c8-60-00-c9-6a-5c
0m 00.27s: Reg URL link is:
0m 00.27s: Version is: 9012
0m 00.27s: Product is: 2
0m 00.28s: Connect type is: 0
0m 00.97s: Times of connecting error is: 0
0m 00.97s: Parse string is: 2:1419226165
0m 00.97s: Parse string is: 20:1419226165
0m 00.97s: Parse string is: 60:1419213865
0m 00.98s: Parse string is: OV:9012
0m 00.98s: Parse string is: BV:9008
0m 00.98s: Parse string is: S:20e0d47ad81b9b5d938d9a2de5883597
0m 01.28s: End check info.
0m 01.28s: Load config successful.
0m 01.44s: Init profile data driver sucessful.
0m 01.50s: Init GPU settings sucessful.
0m 01.50s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 01.50s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 04.81s: Init burn engine successful.
0m 04.92s: opening drive E
0m 04.93s: opened i/o
0m 04.93s: got media type 15
0m 05.45s: got disc type 0
0m 05.45s: got max lba 23880767
0m 06.70s: type Blu-ray BDMV
0m 06.70s: volume label NATIONAL_TREASURE
0m 06.77s: opening drive F
0m 06.83s: opened i/o
0m 06.84s: got media type 16
0m 06.85s: got disc type 0
0m 06.85s: got max lba 0
0m 07.90s: aacs 1 bd+ 0
0m 08.59s: Java protection is removed by StealthyClone anti-protection.
0m 08.65s: got discinfo
0m 08.94s: got bdmv
0m 08.96s: Vendor: PIONEER
0m 08.96s: Product: BD-RW BDR-207D
0m 08.96s: Revision: 1.30
0m 08.96s: Vendor specific: 12/09/05 PIONEER
0m 08.96s: AACS version: 1
0m 08.96s: Number of concurrent AGIDs: 1
0m 08.97s: Supports bus encryption: YES
0m 08.97s: Supports binding nonce generation: YES
0m 08.97s: Supports Hybrid discs: NO
0m 08.99s: got agid 0
0m 09.06s: sent host cert chal
0m 09.08s: got drive cert chal
0m 09.08s: BEC 1
0m 09.08s: DRIVE_VENDOR 0x0067
0m 09.13s: got drive key
0m 09.13s: got host key signature
0m 09.13s: verified drive signature
0m 09.13s: verified host signature
0m 09.18s: sent host signature and key point
0m 09.18s: got bus key
0m 09.22s: got agid 0
0m 09.29s: sent host cert chal
0m 09.31s: got drive cert chal
0m 09.31s: BEC 1
0m 09.31s: DRIVE_VENDOR 0x0067
0m 09.36s: got drive key
0m 09.36s: got host key signature
0m 09.36s: verified drive signature
0m 09.37s: verified host signature
0m 09.42s: sent host signature and key point
0m 09.42s: got bus key
0m 09.44s: got volume id
0m 09.44s: got volume id mac
0m 09.44s: volume id is correct
0m 09.44s: got vid
0m 09.58s: blu-ray 06D890928926D92955883CD08C0D50B17F3882DF
0m 10.16s: cert BEE=0x00 same
0m 11.50s: D F58B837C
0m 11.51s: got vuk
0m 11.53s: got agid 0
0m 11.61s: sent host cert chal
0m 11.63s: got drive cert chal
0m 11.63s: BEC 1
0m 11.63s: DRIVE_VENDOR 0x0067
0m 11.68s: got drive key
0m 11.68s: got host key signature
0m 11.68s: verified drive signature
0m 11.68s: verified host signature
0m 11.74s: sent host signature and key point
0m 11.75s: got bus key
0m 11.76s: got data key
0m 11.96s: got unit key 1
1m 27.86s: got extended bdinfo
1m 27.86s: opened blu-ray
1m 27.95s: opening drive F
1m 28.02s: opened i/o
1m 28.03s: got disc type 0
1m 28.03s: got max lba 0
1m 50.13s: Burn data size is: 23000
1m 50.14s: Burn disc space is: 23866
4m 05.99s: Blu-ray Copy: Main Movie
4m 05.99s: Source: E:/BDMV/
4m 05.99s: Playlist: 138
4m 05.99s: Chapters: 1 -> 20
4m 05.99s: TotalSize: 33315 MB
4m 06.00s: SourceSize: 33315 MB
4m 06.00s: RemoveHDAudio: 0
4m 06.00s: CompressToAC3: 0
4m 06.00s: OutputSize: 23000 MB
4m 06.00s: OutputDisc: BDMV
4m 06.00s: OutputTarget: BD25
4m 06.00s: OutputVideo: 1080p/i
4m 06.01s: info: enable bd copy(mode=0)
4m 06.01s: info: video encode mode(0), bitrate(13506), lr-encode(no)
4m 06.01s: info: streams(4113.2)
4m 06.01s: info: blu-ray copy begin (unit[elem[atomic[00136.m2ts]]])
4m 06.02s: info: enable multi-thread software decoder
4m 07.04s: info: h264_encode: encode param profile(2) level(41) bitrate(13506)
4m 11.05s: info: processing source(00136.m2ts)
15m 30.69s: filter:503.01
15m 30.69s: fifo:1494-503.03-1-1,block:45
15m 30.69s: filter:503.03
15m 30.69s: fifo:1494-505.04-1-1,block:0
15m 30.69s: filter:505.03
15m 30.69s: fifo:1494-505.04-0-0,block:1217
15m 30.70s: fifo:1494-503.01-1-1,block:193
15m 30.70s: fifo:1494-505.04-2-3,block:338
15m 30.70s: filter:505.04
15m 33.14s: info: group(elem[atomic[00136.m2ts]]) playtime(7864481 ms) source(33315 MB) request(22770 MB) real(2490 MB) bitrate(13506 kbps)
15m 33.15s: compress finished: groups request(22770 MB, 22770 MB) real(2490 MB) average_bitrate(13506 kbps)

90312

I just can't reproduce it, I've tried several different discs all different ways and it just works for me. I have the same processor with an AMD graphics card turned off.

bobmitch

Go figure. I never tried v9 on Windows 7. On Win 7, 8.0.1.3 was the version that worked perfectly. Once I went to Windows 8, everything went south...However, what I don't get...I can make backup copies of any DVD I want...no failure there. I can rip Blu Ray to the HDD as long as in BD50 mode...but once I try to shrink down to BD25...I get all this...

I am baffled as well. I do see where others have had issues with 8.2.2.2, just like mine...read speed drops to 0 and nothing happens after that.

I have a few blu rays that are already smaller than BD25, let me try one...

« Previous Page Next Page »