Error Reading Discs?

Norm@Home

I'm not sure that this is specifically a DVDFab problem but I'm looking for some advice on why this is happening:

In the past six months I've had problems with two Blu-Ray discs in particular, the first is "The Incredibles" and the second is "Scent Of A Woman". I have three different Blu-Ray drives, two Pioneer BDR-208D's, BDR-207M and a third that just shows up as Pioneer BD-RW (no model number).

In the case of "The Incredibles" I tried four different discs in all three drives and in each case there were read errors on each disc. In some cases it would be at the beginning while DVDFab was analyzing the disc, in other cases it would get past that and when the disc was copying I'd get a read error somewhere on the disc between 4% and 20% and after clicking "Ignore All" I tried to let it sit for five hours trying to get past the read error and it never would.

The problem with "Scent of a Woman" is exactly the same, I tried two different discs in all three drives and again sometimes the read error is at the analyzing part otherwise it was either at 3% or 11%.

Of course one of the first things I did was clean the discs but no matter what I still get these read errors. Does anyone have some insight into what the problem is?

- Norm

glenns

Are you using the latest version of Fab version 9.0.9.5 if not please download it and try again.Read errors are caused by dirty or scratched disks most of the time so if their are deep scratches you won't be able to copy them even if they play well.

Their was a problem with a few earlier versions of fab with reading some disks so it's always important to update to the latest version that corrected this problem.If you are using the latest program and still have a problem post your internal fab log files to the disks your having trouble with.

GregiBoy

And if that fails, try those problem disks with PathPlayer turned off.

Norm@Home

DVDFab v9.0.5.5 Error Reading Discs?

[QUOTE=glenns;145262]Are you using the latest version of Fab version 9.0.9.5 if not please download it and try again.[/QUOTE]

I think that was a typeo since the latest version appears to be 9.0.5.5 and yes I am using that version. I have carefully examined these discs and I can't see any deep scratches, at most one of them may have had a little scuff in one spot but the others appeared to be pristine. I've carefully cleaned them and they aren't dirty or have any grease on them.

DVDFab 9.0.5.5 (2013/07/27  00:18:06)



 0m 00.09s: Start preload dll...

 0m 00.13s: Load dll successful.

 0m 00.13s: Start load fabplay dll...

 0m 00.18s: Load fabplay dll successful.

 0m 00.18s: Windows os type is: 14.

 0m 00.18s: Transfer settings successful.

 0m 00.33s: GPUAccelerate: 12351

 0m 00.33s: CUDA cap: 1

 0m 00.33s: Support coreavc decode: 0

 0m 00.33s: Graphics info: LogMeIn Mirror Driver :  : 

 0m 00.33s: Load config successful.

 0m 00.36s: Start get sys number.

 0m 00.37s: Serial number is: 60-a4-4c-51-ac-29

 0m 00.37s: Reg URL link is: 

 0m 00.37s: Version is: 9055

 0m 00.37s: Product is: 2

 0m 00.37s: Connect type is: 0

 0m 00.77s: Times of connecting error is: 0

 0m 00.77s: Parse string is: 2:8260762964

 0m 00.77s: Parse string is: 11:8260762964

 0m 00.77s: Parse string is: 20:8263532095

 0m 00.77s: Parse string is: 22:8260762964

 0m 00.77s: Parse string is: 21:8260762964

 0m 00.77s: Parse string is: 1:1

 0m 00.77s: Parse string is: OV:9055

 0m 00.77s: Parse string is: BV:9051

 0m 00.77s: Parse string is: S:c031357c988bbc93e84c5c85761876bf

 0m 00.87s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1

 0m 00.87s: End check info.

 0m 01.28s: Init GPU settings sucessful.

 0m 01.28s: CommmandLine: 

 0m 01.32s: Profile Manager :: End Load Profile 

 0m 04.73s: Begin init preview play engine.

 0m 04.79s: Init internal engine successful.

 0m 04.82s: Player core's log: 00:18:10 T:7844   ERROR: Couldn't load font name: __subtitle__(), trying to substitute arial.ttf



 0m 04.82s: Player core's log: 00:18:10 T:7844   ERROR: Couldn't load font name:__subtitle__ file:special://xbmc/Fonts/arial.ttf



 0m 04.82s: Player core's log: 00:18:10 T:7844   ERROR: Couldn't load font name: __subtitleborder__(), trying to substitute arial.ttf



 0m 04.82s: Player core's log: 00:18:10 T:7844   ERROR: Couldn't load font name:__subtitleborder__ file:special://xbmc/Fonts/arial.ttf



 0m 04.82s: Player core's log: 00:18:10 T:7844   ERROR: CGUIWindowFullScreen::OnMessage(WINDOW_INIT) - Unable to load subtitle font



 0m 05.02s: Init burn engine successful.

 0m 05.29s: opening drive E

 0m 05.29s: opened i/o

 0m 05.30s: got media type 15

 0m 05.65s: got max lba 21971871

 0m 06.46s: got disc type 20

 0m 06.46s: type Blu-ray BDMV

 0m 06.46s: volume label SCENT_WOMAN_NA

 0m 06.49s: internal path E:/BDMV/

 0m 06.49s: aacs 1 bd+ 0

 0m 07.02s: got bdmv

 0m 07.08s: movie name: scent of a woman||scent_woman_na

 0m 07.08s: Vendor: PIONEER

 0m 07.08s: Product: BD-RW   BDR-208D

 0m 07.08s: Revision: 1.10

 0m 07.08s: Vendor specific: 12/08/22  PIONEER

 0m 07.08s: AACS version: 1

 0m 07.08s: Number of concurrent AGIDs: 1

 0m 07.08s: Supports bus encryption: YES

 0m 07.08s: Supports binding nonce generation: YES

 0m 07.08s: Supports Hybrid discs: NO

 0m 07.09s: got agid 0

 0m 07.12s: sent host cert chal

 0m 07.12s: got drive cert chal

 0m 07.12s: BEC 1

 0m 07.12s: DRIVE_VENDOR 0x0067

 0m 07.15s: got drive key

 0m 07.15s: got host key signature

 0m 07.15s: verified drive signature

 0m 07.15s: verified host signature

 0m 07.18s: sent host signature and key point

 0m 07.18s: got bus key

 0m 07.18s: got agid 0

 0m 07.21s: sent host cert chal

 0m 07.22s: got drive cert chal

 0m 07.22s: BEC 1

 0m 07.22s: DRIVE_VENDOR 0x0067

 0m 07.24s: got drive key

 0m 07.24s: got host key signature

 0m 07.24s: verified drive signature

 0m 07.25s: verified host signature

 0m 07.27s: sent host signature and key point

 0m 07.27s: got bus key

 0m 07.27s: got volume id

 0m 07.27s: got volume id mac

 0m 07.27s: volume id is correct

 0m 07.28s: got vid

 0m 07.40s: blu-ray 74B86FE6B71E8C98E2363633CA1F9A1212D60827

 0m 07.87s: cert BEE=0x00 same

 0m 09.08s: D DD9634C8

 0m 09.08s: got vuk

 0m 09.09s: got agid 0

 0m 09.12s: sent host cert chal

 0m 09.12s: got drive cert chal

 0m 09.12s: BEC 1

 0m 09.12s: DRIVE_VENDOR 0x0067

 0m 09.15s: got drive key

 0m 09.15s: got host key signature

 0m 09.15s: verified drive signature

 0m 09.15s: verified host signature

 0m 09.17s: sent host signature and key point

 0m 09.17s: got bus key

 0m 09.18s: got data key

 0m 09.35s: got unit key 7

 0m 13.49s: got bdmv

 0m 16.95s: got extended bdinfo

 0m 16.95s: opened blu-ray

 0m 42.92s: read error: 11 20448 11051231 3765129 23

 1m 37.04s: read error: 11 20448 11051231 3765159 23

 2m 44.72s: read error: 11 20448 11051231 3765189 23

Just as a wild try, one of my computers still has version 8.2.2.8 and it got farther than 9.0.5.5 to just about 12% before getting an error:





DVDFab 8.2.2.8 (2013/07/27  00:32:55)



 0m 01.39s: Start preload dll...

 0m 01.43s: Load dll successful.

 0m 01.43s: Start load fabplay dll...

 0m 01.49s: Load fabplay dll successful.

 0m 01.49s: Windows os type is: 13.

 0m 01.50s: Transfer settings successful.

 0m 01.71s: GPUAccelerate: 12351

 0m 01.71s: CUDA cap: 1

 0m 01.71s: Support coreavc decode: 0

 0m 01.71s: Graphics info: NVIDIA GeForce GTX 465 : 5.0 : 2.0

 0m 01.72s: Qt Translator file load success 

 0m 01.79s: Load config successful.

 0m 01.88s: Init profile data driver sucessful.

 0m 04.45s: Init GPU settings sucessful.

 0m 04.45s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 0

 0m 04.46s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:

 0m 04.70s: Config ExBar successful.

 0m 04.70s: dvd2dvd have 8 elements.

 0m 04.84s: dvd2mobile have 32 elements.

 0m 05.64s: blu-ray2blu-ray have 4 elements.

 0m 05.67s: blu-ray2mobile have 21 elements.

 0m 06.18s: blu-ray23d have 7 elements.

 0m 06.33s: blu-ray2dvd have 1 elements.

 0m 06.36s: file2mobile have 31 elements.

 0m 07.14s: file2dvd have 1 elements.

 0m 07.16s: file2bluray have 1 elements.

 0m 07.55s: Config work ui controls successful.

 0m 07.74s: Init burn engine successful.

 0m 07.79s: StartNotify successful.

 0m 07.80s: opening drive D

 0m 07.81s: opened i/o

 0m 07.82s: got media type 15

 0m 08.26s: got max lba 21971871

 0m 09.03s: got disc type 20

 0m 09.03s: type Blu-ray BDMV

 0m 09.03s: volume label SCENT_WOMAN_NA

 0m 09.08s: internal path D:/BDMV/

 0m 09.09s: aacs 1 bd+ 0

 0m 09.60s: got bdmv

 0m 09.62s: Vendor: PIONEER

 0m 09.62s: Product: BD-RW   BDR-207M

 0m 09.63s: Revision: 1.21

 0m 09.63s: Vendor specific: 12/03/27  PIONEER

 0m 09.63s: AACS version: 1

 0m 09.63s: Number of concurrent AGIDs: 1

 0m 09.63s: Supports bus encryption: YES

 0m 09.64s: Supports binding nonce generation: YES

 0m 09.64s: Supports Hybrid discs: NO

 0m 09.66s: got agid 0

 0m 09.73s: sent host cert chal

 0m 09.75s: got drive cert chal

 0m 09.75s: BEC 1

 0m 09.75s: DRIVE_VENDOR 0x0067

 0m 09.80s: got drive key

 0m 10.83s: got host key signature

 0m 10.83s: verified drive signature

 0m 10.83s: verified host signature

 0m 10.88s: sent host signature and key point

 0m 10.88s: got bus key

 0m 10.91s: got agid 0

 0m 10.98s: sent host cert chal

 0m 11.00s: got drive cert chal

 0m 11.00s: BEC 1

 0m 11.00s: DRIVE_VENDOR 0x0067

 0m 11.05s: got drive key

 0m 11.05s: got host key signature

 0m 11.05s: verified drive signature

 0m 11.06s: verified host signature

 0m 11.11s: sent host signature and key point

 0m 11.11s: got bus key

 0m 11.12s: got volume id

 0m 11.12s: got volume id mac

 0m 11.12s: volume id is correct

 0m 11.12s: got vid

 0m 11.23s: blu-ray 74B86FE6B71E8C98E2363633CA1F9A1212D60827

 0m 11.71s: cert BEE=0x00 same

 0m 12.93s: D DD9634C8

 0m 12.94s: got vuk

 0m 12.97s: got agid 0

 0m 13.04s: sent host cert chal

 0m 13.06s: got drive cert chal

 0m 13.06s: BEC 1

 0m 13.06s: DRIVE_VENDOR 0x0067

 0m 13.12s: got drive key

 0m 13.12s: got host key signature

 0m 13.12s: verified drive signature

 0m 13.12s: verified host signature

 0m 13.18s: sent host signature and key point

 0m 13.19s: got bus key

 0m 13.20s: got data key

 0m 13.45s: got unit key 7

 0m 25.47s: Java protection is removed by StealthyClone anti-protection.

 0m 25.54s: got discinfo

 0m 25.56s: got bdmv

 0m 28.24s: got extended bdinfo

 0m 28.24s: opened blu-ray

 0m 44.50s: Blu-ray Copy: Full Disc

 0m 44.50s: Source: D:/BDMV/

 0m 44.50s: SourceSize: 42904 MB

 0m 44.50s: RemoveHDAudio: 0

 0m 44.50s: OutputSize: 46100 MB

 0m 44.51s: OutputDisc: BDMV

 0m 44.51s: OutputTarget: BD50

 0m 44.51s: OutputVideo: 1080p/i

 7m 13.11s: read error: 11 20448 11051231 2336415 23

Norm@Home

[QUOTE=GregiBoy;145263]And if that fails, try those problem disks with PathPlayer turned off.[/QUOTE]

In regards to pathplayer, I see in Common Settings when I go to DVD options on the left are "DVD Protection", "DVD Copy" and then "PathPlayer" which I've set to off. However when I go to Blu-Ray there are no PathPlayer options anywhere on the Blu-Ray config screens. Does disabling PathPlayer for DVD's also disable is for BluRay discs?

As per your advise, I did try turning PathPlayer off in the DVD options and retried "Scent Of A Woman" but I still got a read error:

 1m 50.96s: read error: 11 20448 11051231 3765129 23

 2m 10.72s: read error: 11 20448 11051231 3765129 23

 2m 28.30s: read error: 11 20448 11051231 3765129 23

The exact same ones as with PathPlayer on.

glenns

Download VSO inspector from the internet a free program that will do a surface scan and tell you if its the disk it will report all reading errors and if it's a bad disk.Be careful you don't download other junk with it.I believe path player is for regular dvd's not blu rays.Path player should be on for regular dvd's unless theirs a problem with one then turn it off for the problem dvd only then turn it back on.

Norm@Home

DVDFab v9.0.5.5 Error Reading Discs?

One other thing, on the same computer where 9.0.5.5 reported an error during analyzing 8.2.2.8 finished analyzing (no read error) and I tried "Main Movie" instead of Full Disc Copy and I still got a read error just in a different location:

DVDFab 8.2.2.8 (2013/07/27  01:15:06)



 0m 01.39s: Start preload dll...

 0m 01.45s: Load dll successful.

 0m 01.45s: Start load fabplay dll...

 0m 01.50s: Load fabplay dll successful.

 0m 01.50s: Windows os type is: 13.

 0m 01.52s: Transfer settings successful.

 0m 01.66s: GPUAccelerate: 12351

 0m 01.66s: CUDA cap: 1

 0m 01.66s: Support coreavc decode: 0

 0m 01.66s: Graphics info: NVIDIA GeForce GTX 465 : 5.0 : 2.0

 0m 01.67s: Qt Translator file load success 

 0m 01.73s: Load config successful.

 0m 01.80s: Init profile data driver sucessful.

 0m 04.34s: Init GPU settings sucessful.

 0m 04.34s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 0

 0m 04.35s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:

 0m 04.59s: Config ExBar successful.

 0m 04.59s: dvd2dvd have 8 elements.

 0m 04.73s: dvd2mobile have 32 elements.

 0m 05.51s: blu-ray2blu-ray have 4 elements.

 0m 05.54s: blu-ray2mobile have 21 elements.

 0m 06.04s: blu-ray23d have 7 elements.

 0m 06.19s: blu-ray2dvd have 1 elements.

 0m 06.22s: file2mobile have 31 elements.

 0m 06.98s: file2dvd have 1 elements.

 0m 07.00s: file2bluray have 1 elements.

 0m 07.39s: Config work ui controls successful.

 0m 07.69s: Init burn engine successful.

 0m 07.76s: StartNotify successful.

 0m 21.32s: opening drive D

 0m 21.34s: opened i/o

 0m 21.35s: got media type 15

 0m 21.79s: got max lba 21971871

 0m 22.59s: got disc type 20

 0m 22.59s: type Blu-ray BDMV

 0m 22.60s: volume label SCENT_WOMAN_NA

 0m 22.64s: internal path D:/BDMV/

 0m 22.65s: aacs 1 bd+ 0

 0m 23.29s: got bdmv

 0m 23.33s: Vendor: PIONEER

 0m 23.33s: Product: BD-RW   BDR-207M

 0m 23.34s: Revision: 1.21

 0m 23.34s: Vendor specific: 12/03/27  PIONEER

 0m 23.34s: AACS version: 1

 0m 23.34s: Number of concurrent AGIDs: 1

 0m 23.35s: Supports bus encryption: YES

 0m 23.35s: Supports binding nonce generation: YES

 0m 23.35s: Supports Hybrid discs: NO

 0m 23.38s: got agid 0

 0m 23.46s: sent host cert chal

 0m 23.49s: got drive cert chal

 0m 23.49s: BEC 1

 0m 23.49s: DRIVE_VENDOR 0x0067

 0m 23.55s: got drive key

 0m 24.58s: got host key signature

 0m 24.59s: verified drive signature

 0m 24.59s: verified host signature

 0m 24.64s: sent host signature and key point

 0m 24.64s: got bus key

 0m 24.68s: got agid 0

 0m 24.76s: sent host cert chal

 0m 24.77s: got drive cert chal

 0m 24.78s: BEC 1

 0m 24.78s: DRIVE_VENDOR 0x0067

 0m 24.83s: got drive key

 0m 24.84s: got host key signature

 0m 24.84s: verified drive signature

 0m 24.84s: verified host signature

 0m 24.90s: sent host signature and key point

 0m 24.90s: got bus key

 0m 24.91s: got volume id

 0m 24.92s: got volume id mac

 0m 24.92s: volume id is correct

 0m 24.92s: got vid

 0m 25.03s: blu-ray 74B86FE6B71E8C98E2363633CA1F9A1212D60827

 0m 25.49s: cert BEE=0x00 same

 0m 26.67s: D DD9634C8

 0m 26.69s: got vuk

 0m 26.71s: got agid 0

 0m 26.78s: sent host cert chal

 0m 26.80s: got drive cert chal

 0m 26.80s: BEC 1

 0m 26.81s: DRIVE_VENDOR 0x0067

 0m 26.86s: got drive key

 0m 26.86s: got host key signature

 0m 26.87s: verified drive signature

 0m 26.87s: verified host signature

 0m 26.93s: sent host signature and key point

 0m 26.93s: got bus key

 0m 26.95s: got data key

 0m 27.11s: got unit key 7

 0m 39.85s: Java protection is removed by StealthyClone anti-protection.

 0m 39.94s: got discinfo

 0m 39.96s: got bdmv

 0m 42.66s: got extended bdinfo

 0m 42.66s: opened blu-ray

 1m 58.00s: read error: 11 20448 11051231 2705910 23

 2m 12.92s: Blu-ray Copy: Main Movie

 2m 12.92s: Source: D:/BDMV/

 2m 12.93s: Playlist: 800

 2m 12.93s: Chapters: 1 -> 17

 2m 12.93s: TotalSize: 42168 MB

 2m 12.93s: SourceSize: 42168 MB

 2m 12.94s: RemoveHDAudio: 0

 2m 12.94s: CompressToAC3: 0

 2m 12.94s: OutputSize: 46100 MB

 2m 12.94s: OutputDisc: BDMV

 2m 12.94s: OutputTarget: BD50

 2m 12.94s: OutputVideo: 1080p/i

 2m 12.94s: info: enable bd copy(mode=0)

 2m 12.95s: info: streams()

 2m 12.95s: info: blu-ray copy begin (unit[elem[atomic[00023.m2ts]]])

 2m 12.95s: info: processing source(00023.m2ts)

 2m 16.59s: read error: 11 20448 11051231 2705940 23

CBR929

Hi Norm@Home
Maybe try updating your drives firmware which can be found here for your [SIZE=2]Pioneer BDR-207M
NOTE [COLOR=Black]If you do not know how to flash your drive do not do it, it will render your drive useless and you take full responsibility for doing so.

Hope this helps
CBR929
[/COLOR][/SIZE]

Norm@Home

DVDFab v9.0.5.5 Error Reading Discs?

Hi CBR929:

I downloaded the file you linked to, are you sure that site is reliable? The file appears to be a self extracting Rar file and the self-unRar program appears questionable and I hesitate to use it, see the screen shot I attached.

I'll try and find an updated firmware for my drives on Pioneers site and let you know how I make out.

In the mean time, GlenS had suggested that I test the disc with VSO inspector which I actually already had installed on the computer with the BDR-207M drive and here are the results for the amount of time I let it run: (BTW the whole log was over 43000 characters so I had to shorten it somewhat to get it to fit)

2013-07-27 09:50:54	Warning     	Reading of sector 1542144 to 1542159 required 2 tries

2013-07-27 09:50:41	Warning     	Reading of sector 1541984 to 1541999 required 4 tries

2013-07-27 09:50:14	Warning     	Reading of sector 1541888 to 1541903 required 8 tries

2013-07-27 09:49:38	Warning     	Reading of sector 1541536 to 1541551 required 2 tries

2013-07-27 09:49:17	Error       	Reading of sector 1541136 to 1541151 failed: Code 04 44 1E [Hardware error]

2013-07-27 09:48:32	Error       	Reading of sector 1541120 to 1541135 failed: Code 04 44 1E [Hardware error]

2013-07-27 09:47:45	Warning     	Reading of sector 1541056 to 1541071 required 4 tries

2013-07-27 09:47:20	Error       	Reading of sector 1540976 to 1540991 failed: Code 03 11 05 [Read error, L-EC Uncorrectable error]

2013-07-27 09:46:12	Error       	Reading of sector 1540960 to 1540975 failed: Code 03 11 05 [Read error, L-EC Uncorrectable error]

2013-07-27 09:45:01	Warning     	Reading of sector 1539344 to 1539359 required 8 tries

2013-07-27 09:44:15	Error       	Reading of sector 1539328 to 1539343 failed: Code 04 44 1E [Hardware error]

2013-07-27 09:43:34	Warning     	Reading of sector 1538576 to 1538591 required 5 tries

2013-07-27 09:43:10	Error       	Reading of sector 1538560 to 1538575 failed: Code 04 44 1E [Hardware error]

2013-07-27 09:42:26	Error       	Reading of sector 1537728 to 1537743 failed: Code 03 11 05 [Read error, L-EC Uncorrectable error]

2013-07-27 09:41:28	Warning     	Reading of sector 1536096 to 1536111 required 8 tries

2013-07-27 09:40:38	Warning     	Reading of sector 1535968 to 1535983 required 2 tries

2013-07-27 09:40:27	Error       	Reading of sector 1535952 to 1535967 failed: Code 03 11 05 [Read error, L-EC Uncorrectable error]

2013-07-27 09:39:21	Error       	Reading of sector 1535936 to 1535951 failed: Code 03 11 05 [Read error, L-EC Uncorrectable error]

2013-07-27 09:38:17	Error       	Reading of sector 1535856 to 1535871 failed: Code 03 11 05 [Read error, L-EC Uncorrectable error]

2013-07-27 09:37:32	Error       	Reading of sector 1535840 to 1535855 failed: Code 04 44 1E [Hardware error]

2013-07-27 09:36:42	Warning     	Reading of sector 1535248 to 1535263 required 2 tries

2013-07-27 09:36:31	Error       	Reading of sector 1535232 to 1535247 failed: Code 03 11 05 [Read error, L-EC Uncorrectable error]

2013-07-27 09:35:27	Warning     	Reading of sector 1535184 to 1535199 required 7 tries

2013-07-27 09:34:53	Error       	Reading of sector 1535168 to 1535183 failed: Code 04 44 1E [Hardware error]

2013-07-27 09:33:58	Warning     	Reading of sector 1535072 to 1535087 required 2 tries

2013-07-27 09:33:48	Error       	Reading of sector 1534928 to 1534943 failed: Code 03 11 05 [Read error, L-EC Uncorrectable error]

2013-07-27 09:32:47	Error       	Reading of sector 1534912 to 1534927 failed: Code 03 11 05 [Read error, L-EC Uncorrectable error]

2013-07-27 09:31:35	Warning     	Reading of sector 1534720 to 1534735 required 2 tries

2013-07-27 09:31:32	Error       	Reading of sector 1534576 to 1534591 failed: Code 03 11 05 [Read error, L-EC Uncorrectable error]

2013-07-27 09:30:40	Error       	Reading of sector 1534560 to 1534575 failed: Code 04 44 1E [Hardware error]

2013-07-27 09:30:01	Warning     	Reading of sector 1530720 to 1530735 required 8 tries

2013-07-27 09:29:10	Error       	Reading of sector 1530672 to 1530687 failed: Code 03 11 05 [Read error, L-EC Uncorrectable error]

2013-07-27 09:28:00	Error       	Reading of sector 1530656 to 1530671 failed: Code 03 11 05 [Read error, L-EC Uncorrectable error]

2013-07-27 09:26:49	Warning     	Reading of sector 1530624 to 1530639 required 3 tries

2013-07-27 09:26:40	Warning     	Reading of sector 1530560 to 1530575 required 4 tries

2013-07-27 09:26:25	Warning     	Reading of sector 1530400 to 1530415 required 6 tries

2013-07-27 09:25:47	Warning     	Reading of sector 1530208 to 1530223 required 7 tries

2013-07-27 09:25:00	Error       	Reading of sector 1530160 to 1530175 failed: Code 03 11 05 [Read error, L-EC Uncorrectable error]

2013-07-27 09:24:05	Error       	Reading of sector 1530144 to 1530159 failed: Code 03 11 05 [Read error, L-EC Uncorrectable error]

2013-07-27 09:22:56	Warning     	Reading of sector 1527840 to 1527855 required 2 tries

2013-07-27 09:22:46	Warning     	Reading of sector 1527648 to 1527663 required 9 tries

2013-07-27 09:22:10	Warning     	Reading of sector 1527344 to 1527359 required 2 tries

2013-07-27 09:22:02	Error       	Reading of sector 1527328 to 1527343 failed: Code 03 11 05 [Read error, L-EC Uncorrectable error]

2013-07-27 09:21:05	Warning     	Reading of sector 1527072 to 1527087 required 2 tries

2013-07-27 09:20:54	Warning     	Reading of sector 1526560 to 1526575 required 6 tries

2013-07-27 09:20:26	Warning     	Reading of sector 1525968 to 1525983 required 8 tries

2013-07-27 09:19:39	Error       	Reading of sector 1525952 to 1525967 failed: Code 04 44 1E [Hardware error]

2013-07-27 09:18:36	Warning     	Reading of sector 1525856 to 1525871 required 2 tries

2013-07-27 09:15:18	Info        	Scanning BD from sector 0 to 21971871

2013-07-27 09:15:18	Info        	Total sector count: 21971871

2013-07-27 09:15:18	Info        	Surface Scan started

2013-07-27 09:15:18	Info        	Volume Label: SCENT_WOMAN_NA

2013-07-27 09:15:18	Info        	Sessions: 1

2013-07-27 09:15:18	Info        	Tracks: 1

2013-07-27 09:15:18	Info        	Content Type: Data (Mode 1)

2013-07-27 09:15:18	Info        	Layers: 2

2013-07-27 09:15:18	Info        	Capacity: 41.9 GB (21971872 Sectors)

2013-07-27 09:15:18	Info        	Media ID: N/A

2013-07-27 09:15:18	Info        	Media Type: BD

2013-07-27 09:15:07	----        	******************** Log session start 27-Jul 09:15:07.542 PID 896********************

CBR929

Hi Norm@Home
That is strange that it is a rar file, I always get my firmware updates from that site and I trust them, I even tried to open the file and got the same picture as in your screen shot. :confused:
I also use VSO Inspector for DVDs.
The problem is that you have to remove the protection first before using it, or you will have all kinds of errors.
What I do is play the movie in your soft player on your computer, while the movie itself is playing pause it, but do not exit out of the player.
Now start VSO Inspector and run the scan to see if you have different results.
CBR929

sauranan

I am having the same problem with Bluray and 3D. Two of the three Star Wars - V & VII - had disk read errors and Avatar 3D same problem. Phantom and Star Wars VI copied fine.

Seems strange that it would be a burner/reader problem when some work and others don't. I get the "read" error on both my reader and burner drives?

glenns

The M model of this drive is a overseas version.Pioneer has no firmware on their internet sight for the M model.The sight you used i also always use and never had a Rar file yet.I do have to ask if you downloaded the correct file should be the 4th one down says General before the model number.

If this is a fab problem many others would be complaining.If you use the iso inspector program as Cbr-929 told you and you still have read errors i would say its a defective disk or scratched disk it seems its happening at the start of the main movie.Because you have 3 different drives and used 3 copy's of the same disk this leads me to ask if your using store brought disks as not many people have 3 copy's of a blu ray around.Anyway if you keep returning the bad disk for a new disk and it keeps happening it appears like a bad run of disks if this is a store brought disk (3 copy's).

Doe's the disk play ok?

I noticed this in your log: Graphics info: LogMeIn Mirror Driver :What is this and what does it do? Are your windows drivers up to date? Could their be dirt on your laser lens as this will cause read error's use a disk cleaner this is a shot in the dark because you have 3 drives unless they are used in dusty conditions chances all 3 drives being dirty is slim.

The best overall way to troubleshot this is try a different disk one that you know is new or in real good condition then try Fab again and see what happens.

glenns

Sauanan:Post your internal log files for the disks with the read errors.But first try them with the latest fab release as their were a lot of fixes in it.This means make new iso's to your hard drive ok.
Are they clean and free of deep scratches? You can also download Vso inspector and follow the directions crb929 left and do a scan of the disks you have trouble with.This will tell you if it's Fab or the disk is bad.

Gummigutta

[QUOTE=Norm@Home;145293]I downloaded the file you linked to, are you sure that site is reliable? The file appears to be a self extracting Rar file and the self-unRar program appears questionable and I hesitate to use it, see the screen shot I attached.

I'll try and find an updated firmware for my drives on Pioneers site and let you know how I make out.[/QUOTE]

If you extract the downloaded file with a program such as 7-zip.org you get these files:

Directory of D:\BDR-207M_FW130EUJ\

D:\BDR-207M_FW130EUJ\
====================
BR207.exe 267 KB 2012-10-02 11:32:34 AM a
S8000001.130 2615 KB 2012-09-05 09:40:58 AM ra

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Total 0 folder(s); 2 file(s)

Total files size: 3 MB; 2883 KB; 2952048 Bytes

That extracted .exe installer is in pure English. Could be that the downloaded file needs a Japaneese language pack/code pack in Windows to show up Japaneese characters correctly.

Norm@Home

DVDFab v9.0.5.5 Error Reading Discs?

[QUOTE=glenns;145322]The M model of this drive is a overseas version.Pioneer has no firmware on their internet sight for the M model.The sight you used i also always use and never had a Rar file yet.I do have to ask if you downloaded the correct file should be the 4th one down says General before the model number.[/QUOTE]

That's really odd since I bought the 207M from Amazon and it came in a regular box not a white box OEM drive. I did download the correct file and as Gummigutta had suggested I used WinRar to extract the files rather than the self extractor and I did get the same files that he indicated that he got when he extracted them. However when I ran the BR207.exe it said something like "No drives detected" so it must not be the correct firmware for this drive. There was some talk about the 207M drive here: http://club.myce.com/f87/applying-proper-1-30-firmware-update-bdr-207m-330636/ and how different 207 models may use a different kernal and that there's no 1.30 update for this particular model which as I've discovered has firmware 1.21. There was a post by someone here http://club.myce.com/f61/post-new-firmware-tool-announcements-here-blu-ray-hd-dvd-drives-only-223975/index11.html giving a link to a supposed 1.30 firmware for the 207M but it goes to some bogus commercial download site and when you put in the captcha my anti-virus goes crazy warning that it's malicious so no help there.

If this is a fab problem many others would be complaining.If you use the iso inspector program as Cbr-929 told you and you still have read errors i would say its a defective disk or scratched disk it seems its happening at the start of the main movie.Because you have 3 different drives and used 3 copy's of the same disk this leads me to ask if your using store brought disks as not many people have 3 copy's of a blu ray around.Anyway if you keep returning the bad disk for a new disk and it keeps happening it appears like a bad run of disks if this is a store brought disk (3 copy's).

Doe's the disk play ok?

As CBR929 suggested, I didn't have a software Blu-Ray player hence I use Fab to remove the protection so I can play them with a regular media player or stream them to my TV (or convert them to watch on my iPad) but I downloaded and installed the trial of the DVDFab Media Player and the disc will actually start to play but somewhere around 11% the player stops and becomes unresponsive and I can't skip over that section to a later chapter as the player again becomes unresponsive. I tried starting the movie and pausing and then running VSO Inspector and this was the results up until I canceled it:

2013-07-28 12:35:52	Warning     	Surface scan cancelled by user

2013-07-28 12:35:52	Info        	Average read speed: 0.76x

2013-07-28 12:35:52	Info        	Maximum read speed: 1.67x

2013-07-28 12:35:52	Info        	Minimum read speed: 0.01x

2013-07-28 12:35:52	Info        	Good: 10.63%, Problem: 0.00%, Error: 0.00%

2013-07-28 12:35:52	Error       	Reading of sector 2337056 to 2337072 failed: Code 03 11 05 [Read error, L-EC Uncorrectable error]

2013-07-28 12:34:42	Warning     	Reading of sector 2337024 to 2337040 required 2 tries

2013-07-28 12:34:35	Error       	Reading of sector 2337008 to 2337024 failed: Code 03 11 05 [Read error, L-EC Uncorrectable error]

2013-07-28 12:33:25	Error       	Reading of sector 2336992 to 2337008 failed: Code 03 11 05 [Read error, L-EC Uncorrectable error]

2013-07-28 12:32:15	Error       	Reading of sector 2336976 to 2336992 failed: Code 03 11 05 [Read error, L-EC Uncorrectable error]

2013-07-28 12:31:05	Error       	Reading of sector 2336960 to 2336976 failed: Code 03 11 05 [Read error, L-EC Uncorrectable error]

2013-07-28 12:29:55	Error       	Reading of sector 2336944 to 2336960 failed: Code 03 11 05 [Read error, L-EC Uncorrectable error]

2013-07-28 12:28:45	Error       	Reading of sector 2336928 to 2336944 failed: Code 03 11 05 [Read error, L-EC Uncorrectable error]

2013-07-28 12:27:35	Error       	Reading of sector 2336912 to 2336928 failed: Code 03 11 05 [Read error, L-EC Uncorrectable error]

2013-07-28 12:26:25	Error       	Reading of sector 2336896 to 2336912 failed: Code 03 11 05 [Read error, L-EC Uncorrectable error]

2013-07-28 12:25:15	Error       	Reading of sector 2336880 to 2336896 failed: Code 03 11 05 [Read error, L-EC Uncorrectable error]

2013-07-28 12:24:05	Error       	Reading of sector 2336864 to 2336880 failed: Code 03 11 05 [Read error, L-EC Uncorrectable error]

2013-07-28 12:22:55	Error       	Reading of sector 2336848 to 2336864 failed: Code 03 11 05 [Read error, L-EC Uncorrectable error]

2013-07-28 12:21:45	Error       	Reading of sector 2336832 to 2336848 failed: Code 03 11 05 [Read error, L-EC Uncorrectable error]

2013-07-28 12:20:35	Error       	Reading of sector 2336816 to 2336832 failed: Code 03 11 05 [Read error, L-EC Uncorrectable error]

2013-07-28 12:19:25	Error       	Reading of sector 2336800 to 2336816 failed: Code 03 11 05 [Read error, L-EC Uncorrectable error]

2013-07-28 12:18:15	Warning     	Reading of sector 2336720 to 2336736 required 4 tries

2013-07-28 12:17:50	Error       	Reading of sector 2336704 to 2336720 failed: Code 03 11 05 [Read error, L-EC Uncorrectable error]

2013-07-28 12:16:40	Warning     	Reading of sector 2336640 to 2336656 required 3 tries

2013-07-28 12:16:23	Error       	Reading of sector 2336624 to 2336640 failed: Code 03 11 05 [Read error, L-EC Uncorrectable error]

2013-07-28 12:15:13	Error       	Reading of sector 2336608 to 2336624 failed: Code 03 11 05 [Read error, L-EC Uncorrectable error]

2013-07-28 12:14:04	Error       	Reading of sector 2336560 to 2336576 failed: Code 03 11 05 [Read error, L-EC Uncorrectable error]

2013-07-28 12:12:54	Error       	Reading of sector 2336544 to 2336560 failed: Code 03 11 05 [Read error, L-EC Uncorrectable error]

2013-07-28 12:11:44	Error       	Reading of sector 2336528 to 2336544 failed: Code 03 11 05 [Read error, L-EC Uncorrectable error]

2013-07-28 12:10:34	Error       	Reading of sector 2336512 to 2336528 failed: Code 03 11 05 [Read error, L-EC Uncorrectable error]

2013-07-28 12:09:23	Error       	Reading of sector 2336464 to 2336480 failed: Code 03 11 05 [Read error, L-EC Uncorrectable error]

2013-07-28 12:08:13	Error       	Reading of sector 2336448 to 2336464 failed: Code 03 11 05 [Read error, L-EC Uncorrectable error]

2013-07-28 12:07:03	Error       	Reading of sector 2336432 to 2336448 failed: Code 03 11 05 [Read error, L-EC Uncorrectable error]

2013-07-28 12:05:53	Error       	Reading of sector 2336416 to 2336432 failed: Code 03 11 05 [Read error, L-EC Uncorrectable error]

2013-07-28 12:04:43	Warning     	Reading of sector 2336256 to 2336272 required 2 tries

2013-07-28 12:04:34	Error       	Reading of sector 2336240 to 2336256 failed: Code 03 11 05 [Read error, L-EC Uncorrectable error]

2013-07-28 12:03:24	Error       	Reading of sector 2336224 to 2336240 failed: Code 03 11 05 [Read error, L-EC Uncorrectable error]

2013-07-28 12:02:14	Warning     	Reading of sector 2336144 to 2336160 required 6 tries

2013-07-28 12:01:34	Error       	Reading of sector 2336128 to 2336144 failed: Code 03 11 05 [Read error, L-EC Uncorrectable error]

2013-07-28 12:00:24	Warning     	Reading of sector 2335936 to 2335952 required 8 tries

2013-07-28 11:59:32	Warning     	Reading of sector 2335776 to 2335792 required 7 tries

2013-07-28 11:41:11	Info        	Scanning BD from sector 0 to 21971871

2013-07-28 11:41:11	Info        	Total sector count: 21971871

2013-07-28 11:41:11	Info        	Surface Scan started

2013-07-28 11:41:10	Info        	Layers: 2

2013-07-28 11:41:10	Info        	Capacity: 41.9 GB (21971872 Sectors)

2013-07-28 11:41:10	Info        	Media ID: N/A

2013-07-28 11:41:10	Info        	Volume Label: SCENT_WOMAN_NA

2013-07-28 11:41:10	Info        	Media Type: BD

2013-07-28 11:40:52	----        	******************** Log session start 28-Jul 11:40:52.349 PID 12168********************

This is only the second "Scent Of A Woman" disc that I tried, it was "The Incredibles" that I gave up after four discs in a row on all three drives had read errors. (I spent more on postage sending the discs back than I did on the disc itself) There have been several posts in the forums here about people having assorted problems with Disney /Pixar movies but they were several years ago and it was mentioned that some people had these disc read issues while other people posted that they could copy without a problem.

LogMeIn is a service like GotoMyPC and it lets me access my computers from remote locations via a web browser. I generally am on top of driver updates and keep my chipset and graphics drivers fairly up to date. I'm not discounting a dirty lens but I've done other Blu-Ray copy's this week and didn't have an issue with other discs. My house is no more clean or dirty and dusty than anyone elses but I'll try a lens cleaner and see what happens.

It's going to take me some time to send this disc back and get a replacement or I'll just try and buy another new one from eBay and see what happens.

glenns

Sometimes buying disks on eBay is risky some are counterfeits If I was you I would buy the disks from a reliable source such as Amazon,Wall mart or Best buy.Where did you buy the 2 disks your having trouble with? are they used?

Are you using log me in to access Fab ,use Fab over a web browser doing converting work or using Fab to decode disks over a web browser from a remote location as your log seems to report that's what you were doing so here's what I recommend:

Use fab only from a computer your with as Fab needs to use the web to decode disks and if your already using the web to use your computer from a remote location this will reduce bandwidth and may cause these read errors.Fab connects to the internet every time you use it to check to see if you have a active account before it allows you to use it.Streaming can also causes errors.

Here is a link for a good free software player VLC player http://sourceforge.net/projects/vlc/ As with all software downloads make sure you don't download any junk with it.This is a good software player a lot of us use.
Please tell us if the disks your having trouble with play on it and if they play on your media player if they don't your not going to be able to copy them.Don't stream from a remote location use with a computer in your presents.

Norm@Home

DVDFab v9.0.5.5 Error Reading Discs?

In the case of "Scent Of A Woman" the first one was used and I gave it back to the guy since it wouldn't work in any of my drives. The second one is from Walmart.

In the case of "The Incredibles" one was from a local mall store, the second was used and two were from Amazon.

I am not using LogMeIn to work with Fab, I only use it rarely when I need something from one of my computers and I'm not home. In every instance I've reported here I've been physically on the computer in question.

I'll give VLC a try and see what happens; I've also ordered a new BDR-208DBK from Amazon along with a new lens cleaning disk so we'll see what happens. It's going to take a few days to return the disk and maybe order a new one from Amazon but I'll post back when I have something more.

signals

In the cases where I have the discs reported with read errors, I can't duplicate it. For instance all 6 of the Star Wars BDs open with no errors. A tiny almost invisible scratch on a Blu-ray can cause problems. In the case where the same disc produced errors in different places when tried on two PCs, the errors were in roughly the same area of the disc according to the log.

glenns

I also had no problem with Avatar 3d and the The Incredibles" dvd however these were made with earlier versions of Fab when the disks first came out so if its a resent Fab problem one would have to make new iso's.

I don't think it's a Fab problem because of the evidence at had we have two user's complaining out of almost 35 thousand Fab members and the user complaining about his Star war's disks after asking for him to post log files has not.

Also the fact the topic starter made blu rays after and before these disks without problems so based by the facts on hand i come to conclude after testing with vso inspector that the disks are bad full of read errors also because the number of copy's of disks used and different drives used that a drive problem is unlikely making other blu rays with the same drives confirms this.

Because the user used 3-4 disks of the same movie and had problems with new and used copy's seems that a bad run of disks is likely in this case as the evidence at hand seems to point to because the user was able to make other blu rays ok seems that Fab is ok and his equipment is ok this leaves only the disks that can be bad.

Norm@Home

DVDFab v9.0.5.5 Error Reading Discs?

I really don't know what to make of this, I tried a fourth copy of "Scent Of A Woman" and this time I had different results and a different problem. The copy said it completed with no errors however this is a directory list of the stream folder:

 Directory of I:\Temp\Scent Of A Woman\BDMV\STREAM



07/29/2013  02:05 PM              .

07/29/2013  02:05 PM              ..

07/27/2013  12:33 AM        64,106,496 00014.m2ts

07/27/2013  12:33 AM        64,106,496 00015.m2ts

07/27/2013  12:34 AM       136,617,984 00016.m2ts

07/27/2013  12:34 AM       136,617,984 00017.m2ts

07/27/2013  12:34 AM        64,106,496 00018.m2ts

07/27/2013  12:33 AM        31,291,392 00019.m2ts

07/27/2013  12:54 AM     4,748,476,416 00023.m2ts

07/27/2013  12:33 AM         1,351,680 00026.m2ts

07/27/2013  12:33 AM         1,517,568 00027.m2ts

07/27/2013  12:33 AM         1,499,136 00028.m2ts

07/27/2013  12:33 AM         1,093,632 00031.m2ts

07/27/2013  12:33 AM         1,093,632 00032.m2ts

07/27/2013  12:33 AM         1,093,632 00033.m2ts

07/27/2013  12:34 AM        80,510,976 00105.m2ts

You can see the only file of any significant size is 00023.m2ts and that file represents 17 minutes and 26 seconds of the beginning of the movie and the rest is missing even though the copy said successful.

I'm sorry to say that I ran this one right back to the store and then promptly lost the log file. I've ordered a fifth one from a different source and I'm waiting for it to arrive.