Tomb Raider 2018 - will not rip

silfen

I have some problem ripping Tomb Raider 2018
It seems like dvdfab is ripping the movie, but when "finished" theres no file? i am using the 10.2.0.4 version of dvdfab.

When I chose the "i" icon it says :
Info for drive [J:\] (DVDFab 10.2.0.4)
Vendor: , Product:
Revision: , Vendor specific:
Drive region: 2 (RPC II), changes left: 4(user) / 4(vendor)
AACS v1, AGIDs: 2, revocation level: MKBv65+
Support: BUS_ENCRYPTION=YES BN_GENERATION=YES
Supports Hybrid discs: YES
Disc media: Blu-ray (BDMV)
Volume name: TOMB_RAIDER
Region Code is removed. (Region B)
AACS protection (AACSLA) is removed. (MKBv60)
BD+ protection not found.
BluPath: full disc copy/play may not be supported or could not check that!
Main playlist: 00800.mpls

The internal log is attached

Mona

Please open the original disc in Windows explorer, copy all the files out from the original disc except *.M2TS files and then zip them, and attach the .zip file here.

If it's too large to attach to the forum, please send it to googledrive and post the url here.
Thanks.

Mona

silfen

All files and folders from original disc without M2TS files :)

https://drive.google.com/file/d/1lzqzr4837z9sYfoctV7ZtRzxxMsXl3Yn/view?usp=sharing

Spip

I do not get that far with the German version of the new Tomb Raider movie.

The blu ray seems to be detected as usual, I can do a preview and all but when starting ripping, the disc drives slows down to a full stop and nothing happens until I stop the process.

Spip

parit

I have some problem ripping Tomb Raider 2018
It seems like dvdfab is ripping the movie, but when "finished" theres no file? i am using the 10.2.0.4 version of dvdfab.

When I chose the "i" icon it says :
Info for drive [J:\] (DVDFab 10.2.0.4)
Vendor: , Product:
Revision: , Vendor specific:
Drive region: 2 (RPC II), changes left: 4(user) / 4(vendor)
AACS v1, AGIDs: 2, revocation level: MKBv65+
Support: BUS_ENCRYPTION=YES BN_GENERATION=YES
Supports Hybrid discs: YES
Disc media: Blu-ray (BDMV)
Volume name: TOMB_RAIDER
Region Code is removed. (Region B)
AACS protection (AACSLA) is removed. (MKBv60)
BD+ protection not found.
BluPath: full disc copy/play may not be supported or could not check that!
Main playlist: 00800.mpls

The internal log is attached
silfen

I have this exact same problem!!! Help!

Mona

I have this exact same problem!!! Help!

parit

Please specify your the country of your movie and post dvdfab_internal.log file here. Thanks.

Spip

A little update from my side with the latest version DVDFab 10.2.1.0, still not working, unfortunately.

Mona

blu-ray D396A8DFA07ECDBDA860A7D0238AB5BDC4A2EAF9

Your movie version is different from the one silfen posted, please send us this files:
open the original disc in Windows explorer, copy all the files out from the original disc except *.M2TS files and then zip them, and attach the .zip file here.
Or upload to google drive and share the url with us. Thanks.

Spip

Hi Mona,

sorry for the delay, here it is

https://drive.google.com/open?id=1Y-xmYE3MMeQYK-Vh0Kwd7W-0C83KCfzJ

Mona

Hi Mona,

sorry for the delay, here it is

https://drive.google.com/open?id=1Y-xmYE3MMeQYK-Vh0Kwd7W-0C83KCfzJ
Spip

File received, we will check ASAP. Thanks.

Mona

UPDATE:

Please try to convert this BD movie TOMB_RAIDER using profile m2ts.passthrough, and see if the process can go through or not. Please kindly feedback, thank you in advance.

Spip

Dear Mona,

with current version 10.2.1.3 it was possible to do a rip as m2ts.passtrough.

Another try as MKV didin't, as expected.

Mona

Hi Spip,

2018.08.24-12:51:15: info: stream input@ Video(4113)[codec(h264) size(1920*1080) fps(24000/1001) interlace(0) duration(7070)sec opcode(copy) fmt(0) profile(-99) level(-99)]
2018.08.24-12:51:15: info: stream output Video(4113)[codec(h264) size(1920*1080) fps(24000/1001) interlace(0) bitrate(0) duration(7070)sec fmt(0) profile(-99) level(-99)]
2018.08.24-12:51:15: info: stream input@ Audio(4352)[codec(truehd) channels(8) sample(48000) bitrate(448000) bitdepth(24) opcode(copy)]
2018.08.24-12:51:15: info: stream output Audio(4352)[codec(truehd) channels(8) sample(48000) bitrate(448000) bitdepth(24) opcode(copy)]
2018.08.24-12:51:15: info: stream input@ Audio(4353)[codec(dca) channels(6) sample(48000) bitrate(0) bitdepth(16) opcode(copy)]
2018.08.24-12:51:15: info: stream output Audio(4353)[codec(dca) channels(6) sample(48000) bitrate(0) bitdepth(16) opcode(copy)]
2018.08.24-12:51:15: info: stream input@ Audio(4354)[codec(truehd) channels(8) sample(48000) bitrate(448000) bitdepth(24) opcode(copy)]
2018.08.24-12:51:15: info: stream output Audio(4354)[codec(truehd) channels(8) sample(48000) bitrate(448000) bitdepth(24) opcode(copy)]
2018.08.24-12:51:15: info: stream input@ Audio(4355)[codec(dca) channels(6) sample(48000) bitrate(0) bitdepth(16) opcode(copy)]
2018.08.24-12:51:15: info: stream output Audio(4355)[codec(dca) channels(6) sample(48000) bitrate(0) bitdepth(16) opcode(copy)]
2018.08.24-12:51:15: info: stream input@ SubPicture(4608)[codec(pgssub) language(English) opcode(remux)]
2018.08.24-12:51:15: info: stream output SubPicture(4608)[codec(dvdsub) language(English)]
2018.08.24-12:51:15: info: stream input@ SubPicture(4609)[codec(pgssub) language(German) opcode(remux)]
2018.08.24-12:51:15: info: stream output SubPicture(4609)[codec(dvdsub) language(German)]
2018.08.24-12:51:15: info: stream input@ SubPicture(4610)[codec(pgssub) language(German) opcode(remux)]
2018.08.24-12:51:15: info: stream output SubPicture(4610)[codec(dvdsub) language(German)]
2018.08.24-12:51:15: info: SubMode(Remux) -- Display Only forced Subtitle(false)

Please try it this way:
1. select the first turehd audio track only;
2. choose only one subtitle stream, set the subtitle mode to Remux into file/PGS subtitle
And then convert again and see if it will make a difference.

Spip

Hi Mona,

a first update while testing.

I did a different approach and as it looks like it is possible to rip this film (still busy) with all subtitles and all languages (English and German), as long as I do not include the english atmos track (probably also possible to use the english atmos track while dissabling the german atmos track).

I will give a quick update if the resulting file works out fine.

Spip

Yes, I can confirm that it worked out that way (with version 10.2.1.4 btw).

That's a good start and thanks for mentioning it but how do I get all audio tracks ripped?

Spip

I had some time for another test.

The problem seems to be with the english atmos track, whenever I choose this one, all other audio tracks have to be disabled, the subtitles do not matter, all can be choosen at all times.

Mona

Hello Snip,

Thank you for the update, I will pass your feedback to our developers.

Regards,
Mona

walkerx

has the ripping of this title been fixed yet - using v11 and fails to rip

Mona

has the ripping of this title been fixed yet - using v11 and fails to rip
walkerx

What is yours movie version? Got no output file when done? Please try with the latest DVDFab and feedback with the latest log file along withe the description of the problem you got. Thank you.