HL-DT-ST BD-RE-BP60NB10 - Passkey says Yes to Upgrade, DriveTool says No

VinceA

As the topic title says... Passkey says the drive is upgradeable but Drive Tool says no. This is a wee bit distressing after purchasing DriveTool at the advice of Passkey.

True that the site doesn't specifically mention this drive but since Passkey suggested it I guessed, incorrectly that DriveTool would work. Is this drive slated to get support any time in the future?

Mona

Please provide the UHD Drive Tool log file, thanks.

VinceA

Here's the latest

UHD Drive Tool 2.1.0.1(2021/09/14 10:39:44) x64

2021.09.14-10:39:44: Init CrashReportSettings: enabled.
2021.09.14-10:39:44: Set backup path: C:\Users\vince.UTOPIA\Documents\DVDFab\DVDFab12\Te mp\UHD_Drive_Tool\.
2021.09.14-10:39:44: SetAcccountInfo success!!
2021.09.14-10:39:44: SetUserTokenInfo success!!
2021.09.14-10:39:45: Clear Drive List.
2021.09.14-10:39:45: Tool internal v=4
2021.09.14-10:39:45: Initial Drive List.
2021.09.14-10:39:45: Run As Admin.
2021.09.14-10:39:45: get mask of logical drives
2021.09.14-10:39:45: DiEnum Device Info.
2021.09.14-10:39:45: DiEnum Device Info end.
2021.09.14-10:39:45: UHD Drive Tool 2.1.0.1 started!
2021.09.14-10:39:45: Registered User: Feature enabled.
2021.09.14-10:39:45: Microsoft Windows 10 Professional x86_64 Edition (10.0.21390)
2021.09.14-10:39:45: check drive type.
2021.09.14-10:39:45: Searching for SCSI / ATAPI devices......
2021.09.14-10:39:45: get drive list num = 3.
2021.09.14-10:39:45: Open Drive Type = 0
2021.09.14-10:39:45: Open Drive 1 OK.
2021.09.14-10:39:45: Read Drive Firmware.
2021.09.14-10:39:45: Read Ioctl info.
2021.09.14-10:39:45: Got Drive Firmware error.
2021.09.14-10:39:45: Drive Lities = 0.
2021.09.14-10:39:45: Open Drive Type = 0
2021.09.14-10:39:45: Open Drive 1 OK.
2021.09.14-10:39:45: Read Drive Firmware.
2021.09.14-10:39:45: Read Ioctl info.
2021.09.14-10:39:45: Drive Lities = 3.
2021.09.14-10:39:45: get drive list end.
2021.09.14-10:39:45: Sata mode: D, SCSI.
2021.09.14-10:39:45: Get Firmware List
2021.09.14-10:39:45: -> Drive 1 - D:[TSSTcorp DVD+-RW TS-U633J]
2021.09.14-10:39:45: Firmware info error
2021.09.14-10:39:45: Got Firmware Count = 0
2021.09.14-10:39:45: Init firmware list success
2021.09.14-10:39:45: Sata mode: E, N/A.
2021.09.14-10:39:45: Get Firmware List
2021.09.14-10:39:45: -> Drive 2 - E:[HL-DT-ST BD-RE BP60NB10]
2021.09.14-10:39:45: request Firmware List
2021.09.14-10:39:45: Firmware:HL-DT-ST|BD-RE BP60NB10 |BU3
2021.09.14-10:39:45: request Firmware List Ok
2021.09.14-10:39:45: Got Firmware Count = 0
2021.09.14-10:39:45: Init firmware list success
2021.09.14-10:39:45: Found 2 BD-ROM/HD DVD-ROMs!
2021.09.14-10:39:45: -> Drive 2 - E:[HL-DT-ST BD-RE BP60NB10] is selected! fw 1.02
2021.09.14-10:39:45: The selected drive is not supported for downgrade yet.
Please check the supported drive list here.

Mona

Hello, the developer confirms that the drive HL-DT-ST|BD-RE BP60NB10 (fw: BU3) is not supported. There is no solution at the moment.

VinceA

Will you be fixing Passkey to not report that Drive Tool can fix it?

Mona

Will you be fixing Passkey to not report that Drive Tool can fix it?
VinceA

I have passed your request to the product designer.