with 6168 everything worked great, with 6169 i cant grab recordings from "sixx", with 6170, no activity on sat1, sixx, with actual from today, nothing works, so i revert to 6169 once again... hope in near future all will be good then.

with 6168 everything worked great, with 6169 i cant grab recordings from "sixx", with 6170, no activity on sat1, sixx, with actual from today, nothing works, so i revert to 6169 once again... hope in near future all will be good then.DeaconGERWithout logs, and the steps to recreate the issue, you're saying "Something is broke, please fix it" its going to take them a lot longer, and they might not be able to recreate it.I would suggest you consider sharing a log of performing the exact same steps, under each version of the app. That might allow them to compare and see what is happening.

how to create logs? i do have 6169 installer here and the opportunity to update to ..72. If i must show steps, i should have the installers for all versions from 6168 to now.beside this, i wanted to show up, streams of recorded tv-shows are analyzed and grabbed correctly the more the older streamfab is. So this can not be a problem with encode but with streamfab itself. Something must have changed from 6169 to now that prevents streams from being discovered and analyzed. There is no change in the drm, as a result, but a change in the software that is responsible to catch and discover a stream.Maybe i will take my time to make these logs for different recording, but i need some help. This can be a pile of 12-15 logs to show all tv-stations i record and the versions of SF i use.

If i must show steps, i should have the installers for all versions from 6168 to now.DeaconGERIf you have access to it..... this is the link to the Extended Service page where all the links to current and previous Offline Downloaders reside.....https://www.dvdfab.cn/member.htm?a=extended_serviceIf not..... the following are links to the Offline Downloaders for Windows StreamFab x64 versions of 5.1..... 6.1..... and 6.7 through 7.2..... complete with the 6.9 Test and 7.1 beta versions.....Windows StreamFab 6.1.7.2 x64 (Still A Sticky Up Top)https://dl.dvdfab.cn/download/49_6172_f3beb751/streamfab_x64_6172.exeWindows StreamFab 6.1.7.1 x64 beta (Still A Sticky Up Top) (NOT AVAILABLE ON EXTENDED SERVICE PAGE)https://dl.dvdfab.cn/download/streamfab_x64_6171_beta_171d6258.exeWindows StreamFab 6.1.7.0 x64 (Still A Sticky Up Top)https://dl.dvdfab.cn/download/49_6170_1dd4d267/streamfab_x64_6170.exeWindows StreamFab 6.1.6.9 x64 Test Version (Still A Sticky Up Top) (NOT AVAILABLE ON EXTENDED SERVICE PAGE)https://dl.dvdfab.cn/download/StreamFab_x64_6169_test_version.exeWindows StreamFab 6.1.6.9 x64 (Still A Sticky Up Top)https://dl.dvdfab.cn/download/49_6169_e6dcb55d/streamfab_x64_6169.exeWindows StreamFab 6.1.6.8 x64 (Still A Sticky Up Top)https://dl.dvdfab.cn/download/49_6168_02346c1b/streamfab_x64_6168.exeWindows StreamFab 6.1.6.7 x64https://dl.dvdfab.cn/download/49_6167_bea0b182/streamfab_x64_6167.exeWindows StreamFab 6.1.6.1 x64https://dl.dvdfab.cn/download/49_6161_9b2f6fa2/streamfab_x64_6161.exeWindows StreamFab 6.1.5.1 x64https://dl.dvdfab.cn/download/49_6151_e97a1950/streamfab_x64_6151.exeThis is the link where you'll find all the Change Logs for versions 5.1..... 6.1..... 6.7 through 7.0..... and 7.2.....https://www.dvdfab.cn/downloader-new.htmChange Log for 6.9 Test Version (Still A Sticky Up Top)https://forum.dvdfab.cn/forum/software-support-english/youtube-to-mp3-youtube-video-downloader/439189-test-version-for-amazon-and-netflix-re-encoding-mode-march-15-2024Change Log for 7.1 beta (Still A Sticky Up Top)https://forum.dvdfab.cn/forum/software-support-english/youtube-to-mp3-youtube-video-downloader/440244-new-streamfab-6-1-7-1-beta-is-released-april-03-2024

If i must show steps, i should have the installers for all versions from 6168 to now.DeaconGERI just tried to post some Offline Downloader links and my post got "Unapproved".....Maybe the fact that there were 13 links in it had something to do with it.

You can just use this: https://github.com/hyugogirubato/DVDFabExtendDownload

You can just use this: https://github.com/hyugogirubato/DVDFabExtendDownload1binary0As Ed MacMahon would say..... "I did not KNOW that!".....But realistically..... how many people have a working knowledge of Python?.....Or..... even if they saw that episode of "The Nanny"..... actually know who "Shari Lewis and Lamb Chop" really was?..... or is?.....But the one thing you can count on..... and I mean count on without a doubt..... No matter how many times "The Frog" gives "The Scorpion" a ride..... that darn "Scorpion" will always sting....."It's just his nature!".....Was Fran Drescher hot or what?

how to create logs? i do have 6169 installer here and the opportunity to update to ..72. If i must show steps, i should have the installers for all versions from 6168 to now.beside this, i wanted to show up, streams of recorded tv-shows are analyzed and grabbed correctly the more the older streamfab is. So this can not be a problem with encode but with streamfab itself. Something must have changed from 6169 to now that prevents streams from being discovered and analyzed. There is no change in the drm, as a result, but a change in the software that is responsible to catch and discover a stream.Maybe i will take my time to make these logs for different recording, but i need some help. This can be a pile of 12-15 logs to show all tv-stations i record and the versions of SF i use.DeaconGERAs for how to create Logs... They are created automatically as you run StreamFab. When in StreamFab, use the 3 Bar (aka Hamburger) menu, there is an option to "Open Log Folder" Zip up everything there, and share it. OR at least zip/share the Streamfab.log. That being said, if the error is consistently repeatable, I recommend clearing the logs/temp folders, recreate the issue, capture/share those logs. That way your logs are smaller, and only contain the issue. For how to clear, see item 3 at -> https://forum.dvdfab.cn/forum/software-support-english/youtube-to-mp3-youtube-video-downloader/404024-streamfab-faq?p=440495#post440495

Thanks for all, guys, will try when i got some spare time. Maybe on weekend, but never promise that. when i have more than two hours to handle with, i'll stick to it then.

first log is 6173, second, as words say, 6169, which works like a charm.

lesser works...

hizbf

He wasn't all that, he couldn't prevent what is happening now and stop it. As a matter of fact, he was still the HMFIC when the DVD fab movie server was deep sink. You see no trail of that in the forum now, it was wiped clean, you can still google it to get into that forum, but you have to know it was even every there. There were some good customers that were part of that forum and at $300-$325 each for one movie server some had bought not one but two and three to watch throughout their house, talking about getting burnt and not caring, this is what it is. I was a beta tester for the movie server because it was getting jacked up with every software change just like SF (sounds familiar) and that was understandable because it wasn't hard to figure out that you had a software company selling a hardware product (sounds familiar). They tried to fix it by having beta testers to report to the new product manager (Ting) directly to rewrite the software and report on it before it being released, yes, they do and did have that ability. He was good and was doing a good job in completely revamping and rewriting the software, I would say it was almost coming up to speed and out of the blue he disappears mid-way before finishing his project. I asked what happened and where was he at, and my response from Wilson Wang was he was moved to a different department. That is some shi$t no company does that, moving a product manager off a job before the end of a project. Never saw what department he was moved to, think it was just a bunch of scuttlebutt. They can fix this, but I don't see them wanting too or it's going to happen with past experience. It might be worst now with this but marginally at that! If it's business as usually, jump ship very soon because its already too late.

Down2Earth

Can only Fengtao solve the DRM problem in the entire company? Isn't there anyone else?:(

hizbf

As I have said before, this program used to work when they bought it from another company in 2020,(JUST A GUESS) but then the providers got wind of what was going on and changed the DRM, (at first they made an effort.) But as time passed, they couldn't do anything because the developers here were not experienced enough to break it. Fengtao is not here anymore, this program is under different management than the early versions were introduced.
It's absolutely a rip-off now. As I said, I got my money's worth, but if a new customer comes here, I feel bad for them, it's equivalent to a scam.
Chameleon

Who is Fengtao? I just came to this forum not long ago

Chameleon

Who is Fengtao? I just came to this forum not long ago
hizbf

He was one the who originally started this company in 2003. Left in 2019, new management.

hizbf

you can still google it to get into that forum, but you have to know it was even every there. There were some good customers that were part of that forum

Down2Earth

What forum? Is this the forum?

hizbf

He was one the who originally started this company in 2003. Left in 2019, new management.
Chameleon

Did he sell the streamfab? Has the boss changed?

Chameleon

Can only Fengtao solve the DRM problem in the entire company? Isn't there anyone else?:(
hizbf

He couldn't do it now either. But he would have had a bit more to say to the customers than just plain silence.

hizbf

He couldn't do it now either. But he would have had a bit more to say to the customers than just plain silence.
Chameleon

Fengtao Software Inc Is that this one?:)

Down2Earth

He couldn't do it now either. But he would have had a bit more to say to the customers than just plain silence.
Chameleon

Thanks Chameleon, many props to you and I will leave it at that........

hizbf

He couldn't do it now either. But he would have had a bit more to say to the customers than just plain silence.
Chameleon

That streamfab is ruined, no one can solve it anymore:(

I don't know what Fengtao is doing now after all these years? Is he still developing software?:rolleyes:

Kyrie415

6169: works with 1st try. log attached from single download at the moment. Can do more, if needed
DeaconGER

Are you saying downloading newer content works with version 6169?

hizbf

someone can say something for 6175 right now? should i update or do i have to revert the decision afterwards?

Just tested it: Paid for it, but did not work in any way. since almost 3 months no working drm mpd downloader, because it is not recognizing and analysing streams.
So i revert, as usual, back to at least 6169, maybe one earlier and wait until next year... promised 48hours support has not loaded logs or responsed to this thread. Thats a fact. I'm sorry going back to old versions which ironically works better than optimized new ones.
The problem is just two things:
a handful of hours to record (for repetitive tv-shows just in a week out of stock (empty))
and an expiration date for the records (for me 60 days)
which makes this very urgent to have a working 6175 as 6169 do, so my question, what was working in 6169 what in 6175 dont? Logs say "i do not analyze your streams, even if they're obvious right before the eye"
Sorry, but i am waiting for a simple switch (i guess its simple) which makes analyzing mpd's working again.
DeaconGER

I just tried 6176 and the result is the same, it doesn't work!:(

DeaconGER

Are you saying downloading newer content works with version 6169?
Kyrie415

Yes, indeed!

DeaconGER

Any news? up-to-date version work or fails?

DeaconGER

6180 wont do rtl-group as at least from 6166 on.... so at least more than 3 months with ABSOLUTLY NO PROGRESS on purchased modules... vox works again, so i use 6166 (67) again, which is a safe bank.

hizbf

6180 wont do rtl-group as at least from 6166 on.... so at least more than 3 months with ABSOLUTLY NO PROGRESS on purchased modules... vox works again, so i use 6166 (67) again, which is a safe bank.
DeaconGER

There will be no progress in streamfab in the future:rolleyes:

Sebastian001

Are you talking about RTL+?

moviem

I think You can't say in general , MPD works and M3U8 doesn't - I see it depends from the side You are using.

I can download from ardplus.de (using MPD) without any problems.
I CANNOT download from magentatv.de (using probably MPD) anything - though it worked till the DRM change in january. I described this issue here.

https://forum.dvdfab.cn/forum/software-support-english/youtube-to-mp3-youtube-video-downloader/443192-magenta-tv-can-t-be-downloaded-anymore

So I guess it is more difficult, what makes the MPD / M3U8 downloader work or not... - but I also would like to know what's the reason and when it will get fixed...

hizbf

[quote=sebastian001;n443224]are you talking about rtl+?[/quote]

hbo go

Sebastian001

hbo go
hizbf

I meant @DeaconGER

DeaconGER

i am not talking about "pay-tv-services", i am recording tv-shows on "waipu.tv", some sources (vox, voxup, sat1emotion, qvc, and so on) can be downloaded in right way, some sources not. For rtl2, for example, there is no recognition of frame-rate, ("undetermined") which results in good videos with 700MB and a framerate of something like 23594 = result is a video which should be about 90 minutes, but is around 5 minutes long.
Thing is, let me know how to help fixing that. i just posted logs for that occurences before, but i doenst seem to help... so how do i help?

« Previous Page Next Page »