Just a heads up. Disney's Up must have new copy protection as nothing seems to work. My Ripitforme program doesn't dectect the disc, DVD Fab and AnyDVD simply scan the disc forever and on my Mac computers the latest jacktheripper software doesn't fare any better either.

All right, in looking up the Star Trek work around (just because) it appears I may have to turn off the Pathfinder in DVD Fab and then I'll email DVD Fab the info, but this won't happen until I get off work, which is another 8 or nine hours from now. Anyone else get UP to work?

Not available yet many places, so no way to test. USA release is Nov. 10th. FYI it's PathPlayer.

Up I am having problem on this one too. Tried many ways and none works......

UP did turn off the Pathplayer and it works this time.

[QUOTE=Mikezilla2323;6397]did turn off the Pathplayer and it works this time.[/QUOTE]Yep, I was gonna suggest that ...... see "Issues with Snow White (R1 Rel Date: 2009-11-24) Bonus Disc" link in my sig, another Disney flick !!

It's all just cat and mouse. :rolleyes:

[QUOTE=thisdude;5985]Just a heads up. Disney's Up must have new copy protection as nothing seems to work. My Ripitforme program doesn't dectect the disc, DVD Fab and AnyDVD simply scan the disc forever and on my Mac computers the latest jacktheripper software doesn't fare any better either.[/QUOTE] I just rip the movie using the latest version of DVDFAB just go to movie only turn the pathplayer off ignore all errors and pick title 50 and you are good to go I hope this helps it takes a while to start working but it does work enjoy.

are you sure its title 50 and if so which one theres 3 50-1 50-2 and 50- 3

Hi I tried 50-1 did not work picture was choppy in places any ideas will help thanks

on the movie UP is there any better way to find the right title in movie mode than to decrypt them all and try to play each separatly Thanks any help would be welcome

Disney Pixar Up

larry2756

The new Beta 6.2.1.5 will copy this movie.

jimmymovie

I read the thread and tried several times without any success. DVDFab (6.2.1.8 Released on Dec/31/2009 is the last version I tired) still says the writing failed (I think if I ever do it again I would ignore the error and continue buring) so I stopped there. However I found that Shrink can pick the dir that DVDFab created on "My Documents -> DVDFab ->Temp->FullDisc->...") and play it correctly within Shrink. But when I "Backup" the Disc does not play with the correct sequence. Then I read Shrink manuals and us "Reauthor" button to open the folder DVDFab created and see that only title 50 has the main movie. I dragged it to the left side of the sceen and "Backup" and that did it!
Have fun!

lpfdude

I was finally able to get DVDfab 6.2.1.8 to see UP with Pathplaer enabled. Unfortunately, after 3 1/2 hours after the "Analyzing of DVD started" I got the error of "Task_1 failed! Error=401" then "Process Failed!" Does anyone have any ideas?

AGJ

DVDFab can do this movie must be bad pressed disc exchange it for another

wcgreen3

Closed captions

[QUOTE=W&B;7901]Agreed, just a comment on this version of the disc. I just by chance was able to view this disc (NOT COPYING) and I have to say its a all time low for Disney/Pixar. Apparently they are discriminating against the hearing impaired as that disc also does not contain close captions or any sub titles what so ever. This is a sad sad thing for kids who may be hearing impaired and familys can't afford to purchase a disc and merely wanted to rent it to watch. :rolleyes:[/QUOTE]

I spent better part of a day trying to copy and by following the advice of several posters, was finally able to burn a working copy using ver 6.1.1.0. Disabling pathplayer and selecting "Ignore all read errors" was the key for me. When I first played the original disk, it was displayed as Title 31 so that was what I copied.

When I viewed the copy, it displayed the closed captions which I had to turn off. So.... the disk does contain closed captions or, at least, mine did. In fact, I was a bit concerned that I could not turn them off as they can be a distraction and was glad when I found the setting on my DVD player to turn them off.

I did not watch the copy in real time but instead fast forwarded through it and it appeared to be okay.

So thanks to all of you posters for enabling me to accomplish this without a substantial quantity of hair loss.

Dream Kat

DVDFab v6.2.1.8 (unregistered version) no longer works (with or without PathPlayer) for the Disney Pixar DVD "Up" (2009). With PathPlayer, the message "To open this DVD disc, you need buy or renew DVDFab 'DVD to DVD', or you can wait for new version of DVDFab HD Decrypter" is displayed. Without PathPlayer, the disc size reported is incorrectly reported as 70.491GB, and as one would expect attempting to run it malfunctions with Transfer Rate not displayed, Task Time Left always 00:00:00, and after a lengthy time the message "Process Failed!" is displayed.

DVDFab v6.2.0.5 works correctly when the Source is the DVD disc and the Target is a hard disk folder. However, running DVDFab v6.2.0.5 subsequently with the Source being that previous resulting Target hard disk folder, results in the message "To open this DVD disc, you need buy or renew DVDFab 'DVD to DVD', or you can wait for new version of DVDFab HD Decrypter" is displayed.

Log files from each version are attached (with some consolidated lines for brevity):

--------------------------- DVDFab v6.2.0.5 ----------------------------

--- v6.2.0.5 Info Screen ---

Info for drive [D:\] (DVDFab 6.2.0.5)
Drive region: 1

Disc type: Video DVD
Disc region: 1
Volume name: UP
Video standard: NTSC
Layer 0 size: 2040880 sectors (3986 MBytes)
Layer 1 size: 2040880 sectors (3986 MBytes)

CSS (Content Scramble System) protection is removed!
RC (Region Code) protection is removed!
RCE (Region Code Enhancement) protection is removed!
APS (Analog Protection System) protection is removed!
UOPs (User Operation Prohibitions) protection is removed!

Invalid PTTs protection is removed!
Invalid PGCIs protection is not found.
Invalid PGCs protection is not found.
Invalid TMAPs protection is not found.
Invalid CELLs protection is removed!
Invalid VOBUs protection is removed!
Fake vts 2-9,12-17,19-22 is removed!
18 fake vts protections are removed!
Potential bad sector (vts:18 title begin:0 end:2687) is removed!
Potential bad sector (vts:18 title begin:2720 end:4111) is removed!
Potential bad sector (vts:23 title begin:0 end:23035) is removed!
3 potential bad sector protections are removed!
Structure protection (ARccOS, RipGuard, etc.) is removed!

PathPlayer is enabled!
Unplayable cell (vts:18 title pgc:1 cell:1-163) is removed!
Unplayable cell (vts:18 title pgc:2 cell:2-6) is removed!
Unplayable cell (vts:18 title pgc:3 cell:1-163) is removed!
Unplayable cell (vts:18 title pgc:4 cell:1-161) is removed!
Unplayable cell (vts:18 title pgc:5 cell:3-6) is removed!
Unplayable cell (vts:18 title pgc:6 cell:1) is removed!
Unplayable cell (vts:18 title pgc:7 cell:1) is removed!
Unplayable cell (vts:23 title pgc:2 cell:1) is removed!
Unplayable cell (vts:26 title pgc:2 cell:1) is removed!
Unplayable cell (vts:26 title pgc:5 cell:1) is removed!
501 unplayable cells are removed!

--- v6.2.0.5 Process Log ---

13:49:11: You are going to try "DVD to DVD" option.
13:49:11: Analyzing of DVD started
13:49:12: Analyzing of DVD completed successfully
13:49:12: Copy process started
14:23:33: Copy process completed successfully
14:23:34: Process completed successfully!

--- v6.2.0.5 Internal Log ---

DVDFab 6.2.1.8 (2010/01/14 11:44:50)

0m 01.93s: option dvd2dvd 0 dvd2mobile 0 bluray2bluray 1 file2mobile 1 filemover 1
0m 06.13s: detected dvd
0m 06.17s: drive D
0m 06.17s: video dvd 1
0m 06.17s: volume label UP
0m 06.30s: detected dvd
0m 06.33s: drive D
0m 06.33s: video dvd 1
0m 06.33s: volume label UP
0m 06.50s: got copyright 1 fe
0m 06.95s: got udf/iso
0m 14.58s: got discinfo

--- v6.2.0.5 Burn VSO Log ---

2010-01-14 13:46:53 ---- ******************** Log session stop 14-Jan 13:46:53.169 PID 3864********************
2010-01-14 13:44:43 Info Disc (DVD-ROM) not emtpy.
2010-01-14 13:44:41 Info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVDRAM, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R
2010-01-14 13:44:41 Info Drive has Serial ATA physical interface
2010-01-14 13:44:41 Info New Drive selected : 0:1:0 - MATSHITA DVD-RAM UJ880AS 1.50 [D] (Ide)
2010-01-14 13:42:01 Info Current Drive selected : 0:1:0 - MATSHITA DVD-RAM UJ880AS 1.50 [D] (Ide)
2010-01-14 13:42:01 Info Using Advanced SPTI interface
2010-01-14 13:42:01 Info System default language : English (United States)
2010-01-14 13:42:01 Info User default language : English (United States)
2010-01-14 13:42:01 Info DLL Version : 4.0.5.464
2010-01-14 13:42:01 Info DLL : C:\Program Files\DVDFab 6\vso_hwe.dll
2010-01-14 13:42:01 Info Version : 6, 2, 0, 5
2010-01-14 13:42:01 Info ExeName : C:\Program Files\DVDFab 6\DVDFab.exe
2010-01-14 13:42:01 Info OS : Microsoft Windows Vista Home Basic (Build 6002: Service Pack 2)
2010-01-14 13:42:01 ---- ******************** Log session start 14-Jan 13:42:01.660 PID 3864********************

----------------- DVDFab v6.2.1.8 (Without PathPlayer) -----------------

--- v6.2.1.8 Info Screen ---

Drive region: 1

Disc type: Video DVD
Disc region: 1
Volume name: UP
Video standard: NTSC
Layer 0 size: 2040880 sectors (3986 MBytes)
Layer 1 size: 2040880 sectors (3986 MBytes)

CSS (Content Scramble System) protection is removed!
RC (Region Code) protection is removed!
RCE (Region Code Enhancement) protection is removed!
APS (Analog Protection System) protection is removed!
UOPs (User Operation Prohibitions) protection is removed!

Invalid PTTs protection is removed!
Invalid PGCIs protection is not found.
Invalid PGCs protection is not found.
Invalid TMAPs protection is not found.
Invalid CELLs protection is removed!
Invalid VOBUs protection is removed!
Fake vts protection is not found!
Potential bad sector (vts:9 title begin:0 end:195) is removed!
Potential bad sector (vts:12 title begin:0 end:2687) is removed!
Potential bad sector (vts:12 title begin:3110362 end:3171402) is removed!
Potential bad sector (vts:13 title begin:0 end:2687) is removed!
Potential bad sector (vts:13 title begin:3110362 end:3171402) is removed!
Potential bad sector (vts:14 title begin:0 end:2687) is removed!
Potential bad sector (vts:14 title begin:3110362 end:3171402) is removed!
Potential bad sector (vts:15 title begin:0 end:2687) is removed!
Potential bad sector (vts:15 title begin:3110362 end:3171402) is removed!
Potential bad sector (vts:16 title begin:0 end:2687) is removed!
Potential bad sector (vts:16 title begin:3110362 end:3171402) is removed!
Potential bad sector (vts:17 title begin:0 end:2687) is removed!
Potential bad sector (vts:17 title begin:3110362 end:3171402) is removed!
Potential bad sector (vts:18 title begin:0 end:2687) is removed!
Potential bad sector (vts:19 title begin:0 end:2687) is removed!
Potential bad sector (vts:19 title begin:3110362 end:3171402) is removed!
Potential bad sector (vts:20 title begin:0 end:2687) is removed!
Potential bad sector (vts:20 title begin:3110362 end:3171402) is removed!
Potential bad sector (vts:21 title begin:0 end:2687) is removed!
Potential bad sector (vts:21 title begin:3110362 end:3171402) is removed!
Potential bad sector (vts:22 title begin:0 end:2687) is removed!
Potential bad sector (vts:22 title begin:3110362 end:3171402) is removed!
Potential bad sector (vts:23 title begin:0 end:23035) is removed!
23 potential bad sector protections are removed!
Structure protection (ARccOS, RipGuard, etc.) is removed!

PathPlayer is disabled.

--- v6.2.1.8 Process Log ---

16:41:46: You are going to try "DVD to DVD" option.
16:41:50: Analyzing of DVD started
17:28:45: Task_1 failed! Error=401

--- v6.2.1.8 Internal Log ---

DVDFab 6.2.1.8 (2010/01/15 16:34:49)

0m 00.26s: option dvd2dvd 0 dvd2mobile 0 bluray2bluray 1 file2mobile 1 filemover 1
0m 04.64s: detected dvd
0m 04.69s: drive D
0m 04.69s: video dvd 1
0m 04.69s: volume label UP
0m 04.85s: detected dvd
0m 04.91s: drive D
0m 04.91s: video dvd 1
0m 04.91s: volume label UP
0m 05.17s: got copyright 1 fe
0m 06.10s: got udf/iso
0m 15.50s: got discinfo
0m 20.10s: got dvdinfo

--- v6.2.1.8 Burn VSO Log ---

2010-01-15 16:34:12 ---- ******************** Log session stop 15-Jan 16:34:12.639 PID 7020********************
2010-01-15 16:30:09 Info Current Drive selected : 0:1:0 - MATSHITA DVD-RAM UJ880AS 1.50 [D] (Ide)
2010-01-15 16:30:09 Info Using Advanced SPTI interface
2010-01-15 16:30:09 Info System default language : English (United States)
2010-01-15 16:30:09 Info User default language : English (United States)
2010-01-15 16:30:09 Info DLL Version : 4.0.5.464
2010-01-15 16:30:09 Info DLL : C:\Program Files\DVDFab 6\vso_hwe.dll
2010-01-15 16:30:09 Info Version : 6, 2, 1, 8
2010-01-15 16:30:09 Info ExeName : C:\Program Files\DVDFab 6\DVDFab.exe
2010-01-15 16:30:09 Info OS : Microsoft Windows Vista Home Basic (Build 6002: Service Pack 2)
2010-01-15 16:30:09 ---- ******************** Log session start 15-Jan 16:30:09.261 PID 7020********************

------------------------------------------------------------------------

GregiBoy

That is exactly what I would expect to happen because when you are opening the folder as the source, you are using the DVD to DVD function and that trial has expired.

fab_admin

I must of been lucky, I had no problem at all making a back up copy of ''UP''. :confused:

GregiBoy

Not lucky, you are a registered user, so shouldn't be a problem.

fab_admin

Oh okay, well I AM lucky then, lucky I am a registered user. ;)

Sorry, I didn't realise the ones having problems were using the free versions. :o

Dream Kat

Trial Version Issue?

So I am to understand that it's "normal" for the newer trial version (v2.6.1.8) to not handle "Up" (2009) but an older version (v2.6.0.5) will? I just found it odd that a newer version lacked the ability of an older version. But if so, I respect that; I was just trying to provide useful information for what I thought to be a "potential" problem. If it is working the way it is intended, I apologize for wasting everyone's time with this.

spt

I used 6.2.1.8 and turned off pathplay. Then I recorded "Main Movie" Title 50 of UP. This created a file of 4.69 GB. I used "Nero recode" to burn the movie. It would not process nor burn when I used "Recode Main Movie to DVD". But when I used "Recode an Entire DVD to DVD" it processed a file it titled as "unreferenced material" and burned the entire movie with all chapters in the right order, no mismatched sound and perfect picture. Total of 36 chapters 1:35:51

bean55

[QUOTE=Dream Kat;18938]So I am to understand that it's "normal" for the newer trial version (v2.6.1.8) to not handle "Up" (2009) but an older version (v2.6.0.5) will? I just found it odd that a newer version lacked the ability of an older version. But if so, I respect that; I was just trying to provide useful information for what I thought to be a "potential" problem. If it is working the way it is intended, I apologize for wasting everyone's time with this.[/QUOTE]

Dream Kat

Personally I like such Info it helps. Keep up the good work.

ozprme

New user and stuck...

Well, I've poured over the forums and tried at least 2 dozens of variations and tips, but I can't seem to get my copy of Disney's Up to copy to my hard drive.

I have the latest paid version of DVD to DVD. There is no apparent problem with the DVD (even exchanged it in case it was a bad disc), and it plays on my DVD player and my PCs DVD player with no problem. But, in VLC player, the original disc and whatever copies I make, jump and skip repeatedly (especially in chapter 3)...

This is the 1 disc standard DVD version of Up... Any other suggestions I may have missed? All problems with this one movie aside, great product!

flthc

So... I read through all the posts. I down loaded the different versions of DVDfab. (older and the newest beta)Tried the recommended settings for pathplayer and the other settings of pathplayer on the different versions of DVDfab. No luck in ripping except the small MB ripping that some experienced. Is the outcome that only the paid download version works? Buy the way.... I had no trouble ripping Star Wars.

CBR929

flthc I think that movie falls under this anouncement

flthc

[QUOTE=CBR929;23275]flthc I think that movie falls under this anouncement [/QUOTE]

Thanks! I did not see this link anywere in this thread.

CBR929

flthc That link may not be in this thread but, it explains that newer movies with newer encryption will not be available to non paid members for at least 60-90 days. If you have a paid version of Fab this movie should be no problem.

ozprme

[QUOTE=CBR929;23526]flthc That link may not be in this thread but, it explains that newer movies with newer encryption will not be available to non paid members for at least 60-90 days. If you have a paid version of Fab this movie should be no problem.[/QUOTE]

I'm glad you put in the word "should" in there... I'm stuck and cannot get any workable copy of Up (1-disc DVD) at all; and I have the registered version...

Any advice other than just about everything in this thread?

DarthCopier

[QUOTE=ozprme;23214]Well, I've poured over the forums and tried at least 2 dozens of variations and tips, but I can't seem to get my copy of Disney's Up to copy to my hard drive.

I have the latest paid version of DVD to DVD. There is no apparent problem with the DVD (even exchanged it in case it was a bad disc), and it plays on my DVD player and my PCs DVD player with no problem. But, in VLC player, the original disc and whatever copies I make, jump and skip repeatedly (especially in chapter 3)...

This is the 1 disc standard DVD version of Up... Any other suggestions I may have missed? All problems with this one movie aside, great product![/QUOTE]

According to this post, you have told us:

1.) The original disc (and it's replacement) play fine in your DVD Player.

2.) The original disc (and it's replacement) play fine in your PC DVD Player.

3.) The original disc and copies won't play properly in VLC Player

What you haven't told us:

1.) How the copies play in either your DVD Player or PC DVD Player.

Based on the above, I'd have to say your issue is with VLC player, and not DVD Fab, as neither the original or it's copies will play properly in that player.

Perhaps your time would be better spent on a VLC forum, seeing if they have any suggestions for you and your issue with that player.

DC

:cool:

« Previous Page