Riddick

[CBR929]

Hi Fiery
Glad you got it sorted!!!
CBR929

[Fiery]

DVDFab v9 Riddick

It played bootifully

Is there a way I can close this thread now?

[Fiery]

Hi Fiery
Is this during the copy or the burning phase?
If copying it may be a new protection that the developers will have to deal with.
If this is during the burning phase, your log still shows Burn disc space is: 4488 did you try lowering it as I suggested earlier?
Please post your burn log

CBR929

It was during the copy phase

[Fiery]

DVDFab v9 Riddick

Now to the problem, I uninstalled all previous and the latest version of DVDFab, cleaned out the Registry of all traces of the software.

Rebooted and tried again, still same problem, so I ran through a mental checklist of possible causes, the light globe came on. Firmware updates for DVDROM's. My D:\ which is where I put the DVD's to be read on had the latest update. My E:\, the one I use to burn actually had an update. What have I got to lose, updated the firmware in my E:\ , and it starts to copy at it's normal pace.

I am currently watching my DVDfab Full Disk copy of Riddick for any stutters etc.

So I will get back to you to let you know if it played fully.

[CBR929]

All 3 disks appear to hang on the same .VOB file VTS_08_2

Hi Fiery
Is this during the copy or the burning phase?
If copying it may be a new protection that the developers will have to deal with.
If this is during the burning phase, your log still shows Burn disc space is: 4488 did you try lowering it as I suggested earlier?
Please post your burn log

CBR929

[Fiery]

DVDFab v9 Riddick

DVDFab 9.1.2.5 (2014/02/06 12:10:44)

0m 00.28s: App info: 2014-1-22
0m 00.28s: App info: 9.1.2.5 9125 Official
0m 00.29s: App info: client type 2.
0m 00.30s: Fabplay load: preload successful.
0m 00.36s: Fabplay load: Load successful.
0m 00.37s: Init process: Transfer settings successful.
0m 00.37s: info: fabcheck logpath= C:/Users/Fiery_WA/Documents/DVDFab9/Log/
0m 00.54s: fab_check_gpu is running ...
0m 01.34s: fab_check_gpu run successful
0m 01.34s: info: recommand= 0, Shrink support= 1, enable= 0, cuda_cap= 0 , cpu_count= 4
0m 01.34s: GPU check: GPUAccelerate-12345
0m 01.34s: GPU check: GPUAccelerate setting-0, 8248
0m 01.35s: GPU check: CUDA cap-0
0m 01.35s: GPU check: Support coreavc decode-0
0m 01.35s: GPU check: Lighting shrink status-1, 0
0m 01.35s: GPU check: Graphics info: NVIDIA GeForce 9800 GT : 6.0 : 1.1
0m 01.35s: Init process: Load config successful.
0m 01.35s: Init process: Windows os type is 12.
0m 01.35s: Init process: command line in is
0m 01.73s: Reg check: Parse string: ( OV:9125 )( BV:9123 )
0m 01.73s: Reg check: Option check status-Local
0m 01.73s: Reg check: ( HD Decrypter:1:1 )-( DVD to DVD (Gold):1:1 )-( DVD to DVD:1:1 )-( DVD to Mobile:1:1 )-( Blu-ray to Blu-ray:1:1 )-( Blu-ray to Mobile:1:1 )-( File to Mobile:1:1 )-( Blu-ray to DVD:1:1 )-( File to DVD:1:1 )-( File to Blu-ray:1:1 )-( File Mover:1:1 )-( Blu-ray to 3D:1:1 )-( 2D to 3D:1:1 )-( Blu-ray Decrypt:1:0 )-( DVD Decrypt:1:0 )-
0m 01.73s: App info: language type ENU.
0m 01.74s: Reg check: Start get sys number.
0m 01.74s: Reg check: Serial number is: 6c-f0-49-71-3d-37
0m 01.74s: Init process: Init GPU settings successful.
0m 01.74s: Reg check: Connect type is: 1
0m 01.90s: Init preview: Begin init preview play engine.
0m 01.90s: Init preview: Init DirectShow engine successful.
0m 02.32s: Profile Manager :: End Load Profile
0m 02.72s: Burn engine: start init.
0m 04.25s: Reg check: Times of connecting error is: 0
0m 04.25s: Reg check: Parse string: ( BV:9123
0m 04.26s: Reg check: Option check status-NewWork
0m 10.16s: Burn engine: engine type-0.
0m 10.16s: Burn engine: writer count 2.
0m 10.16s: Burn engine: 0- D:\ [Optiarc DVD RW AD-7240S 1.04 (Ide)].
0m 10.16s: Burn engine: 1- E:\ [HL-DT-ST DVDRAM GH24NS70 GN01 (Ide)].
0m 10.16s: Burn engine: end init.
0m 11.13s: Init process: Init setting page successful.
0m 11.45s: UI manager: switch to Copy mode.
0m 12.07s: Init process: init main ui successful.
0m 12.12s: Init process: show main ui successful.
0m 12.12s: DriveX msg: Init driveX D with I/O mode: 0
0m 12.12s: DriveX msg: Init driveX E with I/O mode: 0
0m 12.87s: opening drive D
0m 12.90s: opened i/o
0m 13.11s: got media type 4
0m 24.76s: got max lba 3909472
0m 25.36s: got disc type 10
0m 25.54s: type DVD-VIDEO
0m 25.55s: volume label RIDDICK
0m 28.70s: DriveX msg: add media in driveX D.
0m 28.71s: DriveX msg: send open media msg to thread for driveX D.
0m 28.74s: opening drive D
0m 52.57s: opened i/o
0m 55.12s: got media type 4
1m 04.40s: got max lba 3909472
1m 04.65s: got disc type 10
1m 05.01s: type DVD-VIDEO
1m 05.02s: volume label RIDDICK
1m 05.02s: opening drive E
1m 05.04s: opened i/o
1m 05.06s: Source manager: add source id 0.
1m 05.07s: Open blu-ray disc expired time: 197011
1m 05.08s: opening drive D
1m 08.06s: opened i/o
1m 16.90s: got max lba 3909472
1m 20.07s: got disc type 10
1m 20.28s: internal path D:/VIDEO_TS/
1m 31.24s: got copyright 1 f7
2m 11.25s: got udf/iso
2m 50.21s: got discinfo
2m 50.22s: pathplayer disabled 0
4m 02.24s: got dvdinfo
4m 02.87s: opened dvd
4m 02.88s: Source manager: open successful.
4m 07.27s: Work manager: create DVD fulldisc work 0 with source 0 and uiinfo 0.
16m 43.31s: UILog:OnMsgToolbar_Start
16m 43.31s: UILog:Msg Start : ready start
16m 43.31s: UILog:Msg Start : start test run work
16m 43.32s: UILog:right button to null, work falg = -1
16m 43.34s: UILog:Msg Start : run work
16m 43.34s: UILog:Run current Work.
16m 43.34s: UILog:Begin work copy or converter.
16m 47.38s: UILog:start running at thread.
16m 47.40s: UILog:return flag at start running at thread ok.
17m 03.58s: DriveX msg: adding media in driveX E.
17m 13.92s: opening drive E
17m 13.97s: opened i/o
17m 13.97s: got media type 5
17m 13.98s: got max lba 0
17m 13.98s: DriveX msg: media open(false) failed in driveX E.
17m 14.36s: Burn data size is: 7634
17m 14.37s: Burn disc space is: 4488
17m 20.43s: DriveX msg: remove media in driveX E.
17m 28.61s: UILog:MsgWork:current work finish : 4
17m 28.61s: UILog:Run Work to end.
18m 20.13s: DriveX msg: adding media in driveX E.
18m 21.37s: UILog:OnMsgToolbar_Start
18m 21.37s: UILog:Msg Start : ready start
18m 21.37s: UILog:Msg Start : start test run work
18m 21.41s: UILog:Msg Start : run work
18m 21.41s: UILog:Run current Work.
18m 21.41s: UILog:Begin work copy or converter.
18m 21.43s: UILog:start running at thread.
18m 21.44s: UILog:return flag at start running at thread ok.
18m 26.23s: opening drive E
18m 26.26s: opened i/o
18m 26.26s: got media type 5
18m 26.27s: got max lba 0
18m 26.27s: DriveX msg: media open(false) failed in driveX E.
18m 31.39s: Burn data size is: 4482
18m 31.39s: Burn disc space is: 4488
18m 31.76s: UILog:MsgWork:WorkStatus_Start
18m 31.83s: DVD Copy
18m 31.83s: Source: D:/
18m 31.83s: SourceSize: 7634 MB
18m 31.83s: OutputSize: 4482 MB
53m 21.53s: UILog:OnMsgToolbar_Pause
53m 22.73s: UILog:OnMsgToolbar_Continue

All 3 disks appear to hang on the same .VOB file VTS_08_2

[CBR929]

Hi Fiery
I agree with my friends, language like that will not be tolerated on this forum, consider this your warning.

You will need to post the internal log using "YOUR" new disc so that we can compare the logs to see if we see anything different.

As I said in my previous post, I had a son.
CBR929

[Fiery]

DVDFab v9 Riddick

No I didn't own the first two disks, my friends did, however who said I was burning the copy for me? I have the PC the software, and the smarts to do it for them

I am fully aware it is illegal to copy movies that aren't owned, in fact making a backup could be considered illegal.

But if that was the case wouldn't you guys be out of business?

90312

I have read the link

quote "but believe that consumers that purchase entertainment media products have the Fair Use right to 1) make a single backup copy for security purposes"

I do apologise if by doing my friends a favour, I have committed a sin, I personally don't see what if anything I have done wrong, by helping out my friends.

If it was a rental, then yes, I would be breaking the Law, but I now have my own copy, and am still experiencing the same problems.

[90312]

Fiery, read this:

I don't feel the need to close the thread but another moderator might.

[glenns]

The other 2 disks were friends disks OP only brought the 3d disk because the other 2 didn't work and their for is in violation of Fab policy OP didn't own the disk to begin with.Other Moderators have said this forum can be closed down for this reason.

[90312]

I deleted the offending language. If the OP owns the original disc I don't see a problem. Let the moderators do the moderation.

[glenns]

FIERY:We don't need to see crap like this in your 1st sentence in your last post.

Your post should be deleted and you warned on 2 counts first because of your 1st sentence and second because we don't use Fab with disks you don't own you did it with 2 friends disks.

[Fiery]

DVDFab v9 Riddick

I still have to uninstall the older versions and reinstall the new version.

But I am thinking it must be a Region protection, because this time, yes a 3rd disk, a brand spanking new one. (the other two were friends originals). Is having problems copying the full disk!

It analyzes fine, but this brand new copy, will not even get off the start mark!

Oh and CBR what did you end up having a boy or a daddy's little girl?

[CBR929]

Hi Fiery
Path player should be set to always enabled but, in some cases disabling it will get the job done.

4482 is still too large I think, even for Verbatim discs.

My bike is a Honda 2001 CBR929RR, bought it brand new but, I only rode it for 3 years then put it away when my wife was pregnant with my son, I vow to get it out this year or sell it.
CBR929

[Fiery]

Hi Fiery
From your logs it looks as though it opened the DVD with path player disabled.
As stated from my friends, we will also need your burn logs, and it may be a new copy protection schema for your region.

A few things to try:
1) Install ImgBurn and use it to make your ISO file, you will find instructions in the link in my signature on setting it up with Fab.

2) Lower your output size in Fab, pulled from your log: OutputSize: 4482 MB
4482 is to large, even when using quality media. Mine is set to 4472 using quality media (Verbatim), try setting it to 4472 or the default 4300.

@ signals at the end of the log it shows that she made an AVI

Give these suggestions a try and post back.
CBR929

I generally have the Pathplayer set to use if needed, but with this particular movie, all the software was doing was trying to open the source, so I tried it with Pathplayer enabled ... same thing .. the only other option was to disable it and voila it opened ... just the damn thing would not copy
I gave up on the .ISO .. and the only blank media is Verbatim

Oh and just for the record, this is the first time I have not been able to copy a full disk using DVDFab

Nothing on my OS is set to auto update, so when I tried with the first disk to copy it, and it was a no go, I came and got the latest version. In the past it has always done the trick.

As for .AVI, yes I have it, am I happy with it? No. If I had wanted an .AVI I am sure there are places out there where I could have downloaded it from. I like having the entire disk copied, as a backup, that includes all the added Extras!

By the way not that I am into motorbikes, but what sort is that one? My husband has a Daytona Triumph, in the same Canary yellow lol