Riddick

[CBR929]

Hi Fiery
From your logs it looks as though it opened the DVD with path player disabled.
As stated from my friends, we will also need your burn logs, and it may be a new copy protection schema for your region.

A few things to try:
1) Install ImgBurn and use it to make your ISO file, you will find instructions in the link in my signature on setting it up with Fab.

2) Lower your output size in Fab, pulled from your log: OutputSize: 4482 MB
4482 is to large, even when using quality media. Mine is set to 4472 using quality media (Verbatim), try setting it to 4472 or the default 4300.

@ signals at the end of the log it shows that she made an AVI

Give these suggestions a try and post back.
CBR929

[signals]

I did not see that Fiery had made an AVI that we can only assume for now is OK. Not a protection issue in that case.

[glenns]

Give up it doesn't take that long if your burning a disk taking that long your laser is going to overheat or burn out.If it's burning to disk your having trouble with post the vso burn log you can also try burning it with img burn a free great burner.If it's a burn to disk problem it could be your blank disks so post the burn log.You burned more money in electric than the disk is worth buy a new one and be done with it.

[Fiery]

2m 38.23s: read error: 3 868952 3909418 1921520 0 8 868952
3m 04.03s: read error: 3 868952 3909418 1921520 0 8 868952

I pulled these read errors from your multi logs i don't know what disk being you used 2 different ones.If you delete the old logs and redo it and post new logs with the latest version of Fab we can tell more.This is the only way I can help you.

You can do one with and one without pathfinder.Seems you were able to put Riddick on the hard drive as you were trying other things from the drive.Somehow you made a avi did it play correct through the whole disk?

On the second disk that looked clean look for scratches bend it while holding it while a light source is on it.(Don't bend the disk)

Because you seem to have put the disk on the drive and made a AVI I don't think it's copy protection.

I don't know if the .AVI is 100%, I have yet to watch it all the way through. It starts okay and as I have skipped through it, it appears okay. Also I think I got lucky with the .AVI, because when I tried it again, first disk, it came up with a read error.

The second disk, as I said looks clean no scratches (unlike the first).

I am still trying to do burn an .ISO of it, why I don't know, because I am female and stubborn, and I want the Extras. 62.38% time elapsed 38 hours 36 minutes.

If I give up trying to burn the .ISO. I will uninstall, reinstall and clean out the logs.

[glenns]

2m 38.23s: read error: 3 868952 3909418 1921520 0 8 868952
3m 04.03s: read error: 3 868952 3909418 1921520 0 8 868952

I pulled these read errors from your multi logs i don't know what disk being you used 2 different ones.If you delete the old logs and redo it and post new logs with the latest version of Fab we can tell more.This is the only way I can help you.

You can do one with and one without pathfinder.Seems you were able to put Riddick on the hard drive as you were trying other things from the drive.Somehow you made a avi did it play correct through the whole disk?

On the second disk that looked clean look for scratches bend it while holding it while a light source is on it.(Don't bend the disk)

Because you seem to have put the disk on the drive and made a AVI I don't think it's copy protection.

[signals]

UDMA 5 is perfect, I am sure it must be some protection that is different on the R4/Oz version. The developers will have a look when the New Year's holiday is over. Sorry for the problem.

[Fiery]

I think you have either a bad disc or a problem on your PC (such as a drive in PIO transfer mode). DVDFab v9.1.2.5 copies the Region 1 (US) DVD of this movie in about 12 minutes in Full Disc mode, just tried it.

When a problem is a specific disc, post in the DVD Copy forum next time. This area is for General Questions.

My apologies for posting in the wrong area.

One bad disk yes I would agree, but two doing exactly the same thing?

I am in Australia Region 4. Not that should make a difference.

And as for PIO I just checked my ROM's I have only posted the one but both ROM's are the same.

[glenns]

Your log shows the drives in io mode that's good try version 8 of Fab.If you try a different title you will know everything's working with your drive and Fab.What region disk is this?

[signals]

I think you have either a bad disc or a problem on your PC (such as a drive in PIO transfer mode). DVDFab v9.1.2.5 copies the Region 1 (US) DVD of this movie in about 12 minutes in Full Disc mode, just tried it.

When a problem is a specific disc, post in the DVD Copy forum next time. This area is for General Questions.

[Fiery]

I don't know how it made it the.AVI but it did, I am trying to make an .ISO elapsed time 6 hours and 12%

Time elapsed now 10 hours 40 mins and 22%

[Fiery]

It came out 1-14-14 on dvd so maybe it's not supported yet though I don't see how you made a AVI of it from disk.Maybe it won't play through as you say you didn't play it through yet.The logs should tell us more.

I don't know how it made it the.AVI but it did, I am trying to make an .ISO elapsed time 6 hours and 12%

[signals]

I have this disc and will test it also.

[glenns]

It came out 1-14-14 on dvd so maybe it's not supported yet though I don't see how you made a AVI of it from disk.Maybe it won't play through as you say you didn't play it through yet.The logs should tell us more.

[GregiBoy]

It could also be a new copy protection schema as this is a new title.

[glenns]

Please delete those logs just go back in select all delete and start over with a very clean disk no fingerprints etc. theirs way to many logs in their.Use the latest version 9125 of Fab then post that log try it with and without path player and see if you can get a full disk or cloned iso.