burning backup .iso to 50gb bd-r DL disc issues

stumblinh

It's funny when I burn my single layer verbatim 25gb disc's the software says it's a dual layer disc, do you want to continue, of course I say yes and burn and the discs work fine.. but it's compressed.... and you cannot compress w/ 3d disc's at least I have not been able to.

I finally got some 50gb DL disc's so I can backup my 3d blu-rays and now when I put the media (verbatim d-r DL 50gb 4x) in it says it's a single layer disc and won't burn the .iso backup I have on my hard drive. The program will not see it as a DL disc...

What gives? Using version 8056

cici Jia

Hi Stumblinh,

Please try DVDFab 8.0.5.9 Beta at

We suggest you install Imgburn at , click the round green icon button with a check mark at the right top corner of the DVDFab screen, open "Common Settings" window, click on "write", set the burning engine as Imgburn, then burn again to see the result.

Please visit to set DVDFab work together with imgburn.

Kind regards,
cici

sunny

Hi stumblinh,

Please try DVDFab 8.0.5.9 Beta at

In Blu-ray Copy-Main movie, please set the target Size at the bottom of main screen before you start to copy.

Choose BD25 1080p, DVDFab will compress the material to make it fit one BD25 disc;
Choose BD50, DVDFab will make a copy with no compression and burn to double/dual layer blank BD50 disc.

Sincerely,
Sunny

stumblinh

I had moment... LOL I just loaded in the iso image drectly into imgburn and started it... w/o opening dvdfab. Hope it doesnt make a coaster! LOL argghh..

stumblinh

[QUOTE=cici Jia;67591]Hi Stumblinh,

Please try DVDFab 8.0.5.9 Beta at

We suggest you install Imgburn at , click the round green icon button with a check mark at the right top corner of the DVDFab screen, open "Common Settings" window, click on "write", set the burning engine as Imgburn, then burn again to see the result.

Please visit to set DVDFab work together with imgburn.

Kind regards,
cici[/QUOTE]

This does nothing as it won't even start to burn... dvdfab still rejects the dual layer 50gb disc, actually it's saying its not blue-ray dl disc please insert a dl disc.... It is dvdfab messing up as I was able to drop the .iso image into isoburn and it worked, but it did not burn a 'iso' of the blu-ray disc as there is a bunch of dvdfab info listed on it... so I have a coaster.

W&B

Post your ImgBurn log and DVDFab logs.

stumblinh

Please help me.. I just paid for a LifeTime for this product and it is completely useless.. I can't get it too see DL discs and the only real use I wanted this for was backing up blu-ray 3d discs, which this program will also not compress properly to 25gb discs so I'm stuck using the more costly 50gb discs which it just rejects saying they are not DL... PS as I said even image burn saw the discs as DL 50gb discs and burned w/o issue.. just not in a movie format as your iso data needs your app to burn properly.

stumblinh

[QUOTE=W&B;67711]Post your ImgBurn log and DVDFab logs.[/QUOTE]

Would there be a log? it won't see the media to start anything.. it won't start burning it just keeps kicking the tray open saying I need to put in a DL disc.

I didn't save the log from when I just opened the .iso file in imgburn and made the disc, but the disc works fine it's just in the wrong format (has strange folders etc due to I guess the way dvdfab builds the iso image).

2010-12-16 09:32:01 ---- ******************** Log session stop 16-Dec 09:32:01.403 PID 5300********************
2010-12-16 09:30:44 Info No disc in drive.
2010-12-16 09:30:40 Info Writable disc BD-R Sequential inserted. Ready to write
2010-12-16 09:30:38 Info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVDRAM, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R, Blu Ray-R Seq., Blu Ray-R Rnd., Blu Ray-RE
2010-12-16 09:30:38 Info Drive has Serial ATA physical interface
2010-12-16 09:30:38 Info New Drive selected : 0:2:0 - HL-DT-ST BD-RE BH10LS30 1.00 [F] (Scsi)
2010-12-16 09:30:05 Info Current Drive selected : 0:2:0 - HL-DT-ST BD-RE BH10LS30 1.00 [F] (Scsi)
2010-12-16 09:30:05 Info Using Advanced SPTI interface
2010-12-16 09:30:05 Info System default language : English (United States)
2010-12-16 09:30:05 Info User default language : English (United States)
2010-12-16 09:30:05 Info DLL Version : 4.0.13.476
2010-12-16 09:30:05 Info DLL : C:\Program Files (x86)\DVDFab 8\vso_hwe.dll
2010-12-16 09:30:05 Info Version : 8, 0, 5, 6
2010-12-16 09:30:05 Info ExeName : C:\Program Files (x86)\DVDFab 8\DVDFab.exe
2010-12-16 09:30:05 Info OS : Microsoft Windows 7 Home Premium (Build 7600)
2010-12-16 09:30:05 ---- ******************** Log session start 16-Dec 09:30:05.269 PID 5300********************

2010-12-16 09:29:52 ---- ******************** Log session stop 16-Dec 09:29:52.563 PID 4892********************
2010-12-16 09:22:02 Info Writable disc BD-R Sequential inserted. Ready to write
2010-12-16 09:21:46 Info Parsing disc ...
2010-12-16 09:14:57 Info No disc in drive.
2010-12-16 09:14:53 Info Writable disc BD-R Sequential inserted. Ready to write
2010-12-16 09:14:07 Info Writable disc BD-R Sequential inserted. Ready to write
2010-12-16 09:13:53 Info Parsing disc ...
2010-12-16 09:03:27 Info No disc in drive.
2010-12-16 09:03:25 Info Writable disc BD-R Sequential inserted. Ready to write
2010-12-16 09:03:07 Info Parsing disc ...
2010-12-16 09:02:55 Info No disc in drive.
2010-12-16 09:02:51 Info Writable disc BD-R Sequential inserted. Ready to write
2010-12-16 09:02:49 Info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVDRAM, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R, Blu Ray-R Seq., Blu Ray-R Rnd., Blu Ray-RE
2010-12-16 09:02:49 Info Drive has Serial ATA physical interface
2010-12-16 09:02:49 Info New Drive selected : 0:2:0 - HL-DT-ST BD-RE BH10LS30 1.00 [F] (Scsi)
2010-12-16 09:02:30 Info Current Drive selected : 0:2:0 - HL-DT-ST BD-RE BH10LS30 1.00 [F] (Scsi)
2010-12-16 09:02:30 Info Using Advanced SPTI interface
2010-12-16 09:02:30 Info System default language : English (United States)
2010-12-16 09:02:30 Info User default language : English (United States)
2010-12-16 09:02:30 Info DLL Version : 4.0.13.476
2010-12-16 09:02:30 Info DLL : C:\Program Files (x86)\DVDFab 8\vso_hwe.dll
2010-12-16 09:02:30 Info Version : 8, 0, 5, 6
2010-12-16 09:02:30 Info ExeName : C:\Program Files (x86)\DVDFab 8\DVDFab.exe
2010-12-16 09:02:30 Info OS : Microsoft Windows 7 Home Premium (Build 7600)
2010-12-16 09:02:30 ---- ******************** Log session start 16-Dec 09:02:30.252 PID 4892********************

W&B

I'd 1st suggest d/ling DVDfab virtual drive and mounting the iso you created and playing back on the pc with softwre that supports BD 3D, TotalMedia Theatre 5 has a trial period and should suffice for testing. I don't have PowerDVD but it may support 3D playback.
If the file plays back ok post back here and we'll go from there. (for testing purposes I'd also suggest getting a re-writable BD 50gb disc and Fab can't compress 3D disc to 25gb at least not yet but I think it's in the works)
Also stick with ImgBurn, the error of not recognizing your media is most likely a VSO bug.

stumblinh

[QUOTE=W&B;67740]I'd 1st suggest d/ling DVDfab virtual drive and mounting the iso you created and playing back on the pc with softwre that supports BD 3D, TotalMedia Theatre 5 has a trial period and should suffice for testing. I don't have PowerDVD but it may support 3D playback.
If the file plays back ok post back here and we'll go from there. (for testing purposes I'd also suggest getting a re-writable BD 50gb disc and Fab can't compress 3D disc to 25gb at least not yet but I think it's in the works)
Also stick with ImgBurn, the error of not recognizing your media is most likely a VSO bug.[/QUOTE]

Ok' I'm sure based on this comment I'm not communicating this correctly..

THIS IMAGE is Fine, the DVDFAB program WON'T EVEN START TO BURN THE IMAGE BECAUASE IT THINKS the dual layer disc is a single layer disc... I can open the image that was made in dvdfab directly in imgburn and burn it to a 50gb dual layer disc just fine, but the result is a bunch of folders so I'm pretty sure you need to burn the .iso from withing DVDfab to get the correct layout. AGAIN the image is FINE, the DVDFAB PROGRAM WILL NOT START BURNING IT EVEN WITH IMGBURN AS THE ENGINE IT SIMPLY SAYS IT'S NOT A DL disc AND OPENS THE DRAWER AND SAYS TO PUT IN A DUAL LAYER DISC.

W&B

Well would you mind pointing out where you said you tested the iso by playing it back on your computer? All I see is you tried burning it with ImgBurn and something called isoburn...
Maybe you need to chill out and stop shouting (caps) if you want help and gain some basic computer skills.

W&B

In case anyone else is attempting to burn a 3d image file to blank media I'd suggest reading this thread especially post #20 and heed the last sentence in that post because I don't own any 3D disc nor can I play them back for testing.

Peace out!!

stumblinh

[QUOTE=W&B;67789]In case anyone else is attempting to burn a 3d image file to blank media I'd suggest reading this thread especially post #20 and heed the last sentence in that post because I don't own any 3D disc nor can I play them back for testing.

Peace out!![/QUOTE]

Yes good link, this is what I did, made the image file using that setting. I will try a direct clone and bypass the image all together tonight, but I'm not sure it will help as the problem isn't w/ the image it's the fact that dvdfab thinks my dual layer disc is a single layer disc and just wont start. Also as I mentioned before when I put in a single layer disc I get the warning saying this is a dual layer disc, continue anyway? and I always have to hit yes to burn and then it does it thing. Something is backward.

PS the caps were to highlight my words that I thought were being overlooked.. not trying to yell just point out. Anyway thanks for the replies, at least someone is trying to help me :)

stumblinh

updated my player, mounted the iso and it does work.. verified.

I also dropped the 3d blu-ray that I burt with imgburn (from the clone img I made w/ dvdfab) into my actual 3d blu-ray player (panasonic) and even though the files are NOT the same as the original disc... it DOES play and it DOES play in 3d!! So at least this burn was not a waste!! Good working backup of my Avatar 3d disc.

Now how do I get dvdfab to recognize my 50gb discs and burn them is the only question left.. at least I can use the fab to make the image and isoburn to make the disc for the time being while this bug is worked out.

I'm letting the movie play through right now to verify no issues... I'll update after it plays through.

W&B

[QUOTE=stumblinh;67817]updated my player, mounted the iso and it does work.. verified.[/QUOTE]

Your standalone BD player? If a standalone player that may possibly been the problem all along.

I also dropped the 3d blu-ray that I burt with imgburn (from the clone img I made w/ dvdfab) into my actual 3d blu-ray player (panasonic) and even though the files are NOT the same as the original disc... it DOES play and it DOES play in 3d!! So at least this burn was not a waste!! Good working backup of my Avatar 3d disc.

Groovy! Glad it worked out for you but could you please post the log for ImgBurn, I'd just like to get a look at it.

Now how do I get dvdfab to recognize my 50gb discs and burn them is the only question left.. at least I can use the fab to make the image and isoburn to make the disc for the time being while this bug is worked out.

I'm letting the movie play through right now to verify no issues... I'll update after it plays through.

Fab can be setup to use ImgBurn as the default burner, here's a link for instructions how

btw you mention isoburn, do did you mean ImgBurn?
Merry Christmas and Happy Burning :)

(Edit: side note, I noticed the other day PS3 has a new firmware update 3.55 and it's mainly geared for 3D playback from what I can tell so anyone having this same problem might need to update)

stumblinh

Your standalone BD player? If a standalone player that may possibly been the problem all along.

No I never put it in the stand alone bd 3d player until after I loaded the iso.. started up no hiccups in the panny

Groovy! Glad it worked out for you but could you please post the log for ImgBurn, I'd just like to get a look at it.

I'll see if it has it in the file still.

Fab can be setup to use ImgBurn as the default burner, here's a link for instructions how

Yes I tried this.. no matter what I do dvdfab will not read the DL discs I can load the image, I hit start and it kicks out the drawer and says put in a DL disc..

btw you mention isoburn, do did you mean ImgBurn?
Merry Christmas and Happy Burning :)

Yes I did mean imgburn :)

(Edit: side note, I noticed the other day PS3 has a new firmware update 3.55 and it's mainly geared for 3D playback from what I can tell so anyone having this same problem might need to update)

I was going to run my 3d off a ps3 but way too many issues out there from what I read w/ burnt discs. got a great deal on the HTIB panny setup.. and it does checkerboard for my 61" samsung led dlp (which looks better than most 3d setups mind you (lcd,led,plasma)).

AGJ

An iso file will not be burned to blank media as an iso. It will be unpacked during the burn process and burned as folder files like the original disc is. iso is just a container that holds the folders you are seeing kinda like avi, mp4 and such

stumblinh

Here is the log from a good burn.. and the ONLY way I have been able to burn these. I've had real issues getting good burns w/ these 3d iso's mind you even with imgburn.

#1 from fresh install of imgburn no setting changes use awg or 2x burn load up the ripped iso file from dvdfab in imgburn (the actual program itself.. not using imgburn as the engine in dvdfab) I still cannot get dvdfab even w/the newer beta and or using imgburn as the engine to acknowledge my DL 50gb discs..

After one good burn, I had two bad burns using imgburn but I did follow the setup guide and change a few things trying to get it setup as suggest with in dvdfab. After the 2nd bad burn I uninstalled imgburn and deleted my bd-r drive and let windows find it again.. then re-installed imgburn and from fresh settings was able to have a good burn of another bluray 3d backup.

I 00:10:50 ImgBurn Version 2.5.4.0 started!
I 00:10:50 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7600)
I 00:10:50 Total Physical Memory: 8,380,304 KB - Available: 6,557,116 KB
I 00:10:50 Initialising SPTI...
I 00:10:50 Searching for SCSI / ATAPI devices...
I 00:10:50 -> Drive 1 - Info: HL-DT-ST BD-RE BH10LS30 1.00 (F:) (RAID)
I 00:10:50 -> Drive 2 - Info: hp DVD-RAM GH40L RB0A (G:) (RAID)
I 00:10:50 Found 1 DVDÂ±RW/RAM and 1 BD-RE!
I 00:12:33 Operation Started!
I 00:12:33 Source File: E:\TEMP\Clone\RED_BIRD_3D_WW.iso
I 00:12:33 Source File Sectors: 24,438,784 (MODE1/2048)
I 00:12:33 Source File Size: 50,050,629,632 bytes
I 00:12:33 Source File Volume Identifier: RED_BIRD_3D_WW
I 00:12:33 Source File Volume Set Identifier: 3D21BC50RED_BIRD
I 00:12:33 Source File Application Identifier: BD Authoring
I 00:12:33 Source File Implementation Identifier: MEI
I 00:12:33 Source File File System(s): UDF (2.50)
I 00:12:33 Destination Device: [0:2:0] HL-DT-ST BD-RE BH10LS30 1.00 (F:) (RAID)
I 00:12:33 Destination Media Type: BD-R (Disc ID: VERBAT-IMd-000) (Speeds: 2x, 4x, 6x)
I 00:12:33 Destination Media Sectors: 24,438,784
I 00:12:33 Write Mode: BD
I 00:12:33 Write Type: DAO
I 00:12:33 Write Speed: MAX
I 00:12:33 BD-R Verify Not Required: Yes
I 00:12:33 Link Size: Auto
I 00:12:33 Lock Volume: Yes
I 00:12:33 Test Mode: No
I 00:12:33 OPC: No
I 00:12:33 BURN-Proof: Enabled
I 00:12:33 Write Speed Successfully Set! - Effective: 26,973 KB/s (6x)
I 00:12:34 Filling Buffer... (40 MB)
I 00:12:35 Writing LeadIn...
I 00:13:00 Writing Session 1 of 1... (1 Track, LBA: 0 - 24438783)
I 00:13:00 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 24438783)
I 00:13:00 Writing Layer 0... (LBA: 0 - 12219391)
I 00:30:34 Writing Layer 1... (LBA: 12219392 - 24438783)
I 00:48:06 Synchronising Cache...
I 00:48:08 Closing Track...
I 00:48:09 Finalising Disc...
I 00:48:22 Exporting Graph Data...
I 00:48:22 Graph Data File: C:\Users\bjb11\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_BH10LS30_1.00_FRIDAY-DECEMBER-17-2010_12-12_AM_VERBAT-IMd-000_MAX.ibg
I 00:48:22 Export Successfully Completed!
I 00:48:22 Operation Successfully Completed! - Duration: 00:35:48
I 00:48:22 Average Write Rate: 23,208 KB/s (5.2x) - Maximum Write Rate: 27,088 KB/s (6.0x)
I 00:48:22 Cycling Tray before Verify...
W 00:48:31 Waiting for device to become ready...
I 00:48:54 Device Ready!
I 00:48:55 Operation Started!
I 00:48:55 Source Device: [0:2:0] HL-DT-ST BD-RE BH10LS30 1.00 (F:) (RAID)
I 00:48:55 Source Media Type: BD-R (Disc ID: VERBAT-IMd-000) (Speeds: 2x, 4x, 6x)
I 00:48:55 Image File: E:\TEMP\Clone\RED_BIRD_3D_WW.iso
I 00:48:55 Image File Sectors: 24,438,784 (MODE1/2048)
I 00:48:55 Image File Size: 50,050,629,632 bytes
I 00:48:55 Image File Volume Identifier: RED_BIRD_3D_WW
I 00:48:55 Image File Volume Set Identifier: 3D21BC50RED_BIRD
I 00:48:55 Image File Application Identifier: BD Authoring
I 00:48:55 Image File Implementation Identifier: MEI
I 00:48:55 Image File File System(s): UDF (2.50)
I 00:48:55 Read Speed (Data/Audio): MAX / MAX
I 00:48:55 Verifying Session 1 of 1... (1 Track, LBA: 0 - 24438783)
I 00:48:55 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 24438783)

AGJ

What type are the verbatims and you should not burn them at max but rather 2x or 4x speed. It might be the blank media being used as to why not being seen as DL 50gb blank even though you using Verbatim

stumblinh

[QUOTE=AGJ;67902]What type are the verbatims and you should not burn them at max but rather 2x or 4x speed. It might be the blank media being used as to why not being seen as DL 50gb blank even though you using Verbatim[/QUOTE]

In dvdfab I had it set for 2x... the first few runs on imgburn I did 2x, but after the re-install of imgburn I decided to leave it at 'aws' setting in the program. I just burned 3 good 50gb full backups of 3 different blu-ray 3d discs using awg. All play perfect in the PC and in my Panasonic blu-ray 3d player on my theatre. Here is a log from the third backup (Coroline), also backed up Avatar and my iceage 3d bluray.

** Label on the discs I'm using is Verbatim bd-r DL for video 50gb 4x (from japan I think) 55 bucks for a 10pack (60 w/ fast ship)

I 01:59:16 ImgBurn Version 2.5.4.0 started!
I 01:59:16 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7600)
I 01:59:16 Total Physical Memory: 8,380,304 KB - Available: 6,719,736 KB
I 01:59:16 Initialising SPTI...
I 01:59:16 Searching for SCSI / ATAPI devices...
I 01:59:16 -> Drive 1 - Info: HL-DT-ST BD-RE BH10LS30 1.00 (F:) (RAID)
I 01:59:16 -> Drive 2 - Info: hp DVD-RAM GH40L RB0A (G:) (RAID)
I 01:59:16 Found 1 DVDÂ±RW/RAM and 1 BD-RE!
I 01:59:45 Operation Started!
I 01:59:45 Source File: E:\CORALINE_3D_BUNDLE\CORALINE_3D_BUNDLE.iso
I 01:59:45 Source File Sectors: 24,438,784 (MODE1/2048)
I 01:59:45 Source File Size: 50,050,629,632 bytes
I 01:59:45 Source File Volume Identifier: CORALINE_3D_BUNDLE
I 01:59:45 Source File Volume Set Identifier: 3C76A491CORALINE
I 01:59:45 Source File Application Identifier: BD Authoring
I 01:59:45 Source File Implementation Identifier: MEI
I 01:59:45 Source File File System(s): UDF (2.50)
I 01:59:45 Destination Device: [0:2:0] HL-DT-ST BD-RE BH10LS30 1.00 (F:) (RAID)
I 01:59:45 Destination Media Type: BD-R (Disc ID: VERBAT-IMd-000) (Speeds: 2x, 4x, 6x)
I 01:59:45 Destination Media Sectors: 24,438,784
I 01:59:45 Write Mode: BD
I 01:59:45 Write Type: DAO
I 01:59:45 Write Speed: MAX
I 01:59:45 BD-R Verify Not Required: Yes
I 01:59:45 Link Size: Auto
I 01:59:45 Lock Volume: Yes
I 01:59:45 Test Mode: No
I 01:59:45 OPC: No
I 01:59:45 BURN-Proof: Enabled
I 01:59:45 Write Speed Successfully Set! - Effective: 26,973 KB/s (6x)
I 01:59:46 Filling Buffer... (40 MB)
I 01:59:46 Writing LeadIn...
I 02:00:09 Writing Session 1 of 1... (1 Track, LBA: 0 - 24438783)
I 02:00:09 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 24438783)
I 02:00:09 Writing Layer 0... (LBA: 0 - 12219391)
I 02:17:43 Writing Layer 1... (LBA: 12219392 - 24438783)
I 02:35:16 Synchronising Cache...
I 02:35:18 Closing Track...
I 02:35:19 Finalising Disc...
I 02:35:31 Exporting Graph Data...
I 02:35:31 Graph Data File: C:\Users\ \AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_BH10LS30_1.00_FRIDAY-DECEMBER-17-2010_1-59_AM_VERBAT-IMd-000_MAX.ibg
I 02:35:31 Export Successfully Completed!
I 02:35:31 Operation Successfully Completed! - Duration: 00:35:46
I 02:35:31 Average Write Rate: 23,197 KB/s (5.2x) - Maximum Write Rate: 27,076 KB/s (6.0x)
I 02:35:31 Cycling Tray before Verify...
W 02:35:41 Waiting for device to become ready...
I 02:36:03 Device Ready!
I 02:36:04 Operation Started!
I 02:36:04 Source Device: [0:2:0] HL-DT-ST BD-RE BH10LS30 1.00 (F:) (RAID)
I 02:36:04 Source Media Type: BD-R (Disc ID: VERBAT-IMd-000) (Speeds: 2x, 4x, 6x)
I 02:36:04 Image File: E:\CORALINE_3D_BUNDLE\CORALINE_3D_BUNDLE.iso
I 02:36:04 Image File Sectors: 24,438,784 (MODE1/2048)
I 02:36:04 Image File Size: 50,050,629,632 bytes
I 02:36:04 Image File Volume Identifier: CORALINE_3D_BUNDLE
I 02:36:04 Image File Volume Set Identifier: 3C76A491CORALINE
I 02:36:04 Image File Application Identifier: BD Authoring
I 02:36:04 Image File Implementation Identifier: MEI
I 02:36:04 Image File File System(s): UDF (2.50)
I 02:36:04 Read Speed (Data/Audio): MAX / MAX
I 02:36:04 Verifying Session 1 of 1... (1 Track, LBA: 0 - 24438783)
I 02:36:04 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 24438783)
I 02:36:04 Verifying Layer 0... (LBA: 0 - 12219391)
I 03:02:52 Verifying Layer 1... (LBA: 12219392 - 24438783)
I 03:29:41 Exporting Graph Data...
I 03:29:41 Graph Data File: C:\Users\ \AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_BH10LS30_1.00_FRIDAY-DECEMBER-17-2010_1-59_AM_VERBAT-IMd-000_MAX.ibg
I 03:29:41 Export Successfully Completed!
I 03:29:41 Operation Successfully Completed! - Duration: 00:53:36
I 03:29:41 Average Verify Rate: 15,202 KB/s (3.4x) - Maximum Verify Rate: 22,060 KB/s (4.9x)