Originally posted by AGJ
Announcement
Collapse
No announcement yet.
Zorro, The Complete First Season
Collapse
X
-
-
Originally posted by AGJActually the problem that caused this was changing Pathplayer to decide if it should stay Enabled or to Disable for certain DVDs. Now have a new problem caused by that change. Also since Passkey uses same decryption engine as DVDFab so Passkey has same problem
Have a few more kids movies that have same problem that I will be posting about soon also but have few other things to do first
Originally posted by Gummigutta View PostTried Miss Montana with the version prior to 8.0.8.2 and this version 8.0.7.3 works as it should, so it seems this update broke her.
Leave a comment:
-
Originally posted by AGJI wouldn't expect it to be fixed anytime soon but you can expect more add ons that will cost more money. Like I mentioned yours has different copy protection and even your Volume Label is different than mine.
So that could be why I was able to get mine done and you having problems. Funny though that an older version works and the newest versions do not
Gummigutta found that DVDFab v7506 would read the Hannah Montana disc without error. I found that DVDFab v6218 would read the Zorro disc without error. Obviously, at some point in the development of DVDFab a bug was introduced sometime after v7506 that causes the program to improperly analyze some of the Disney episodic discs. I will continue to keep v6218 on my desktop until this bug is discovered and removed from future versions. I thank all of you for sharing your experience and information about this problem. It’s been a great help to me.
Leave a comment:
-
Tried Miss Montana with the version prior to 8.0.8.2 and this version 8.0.7.3 works as it should, so it seems this update broke her.
March 15, 2011
DVDFab 8.0.8.2 Updated!
DVD Copy:
New: PathPlayer will be disabled automatically when it has problem with certain old discs.
Leave a comment:
-
Yeah, maybe you would have had more luck if it was in 3D!!!
Originally posted by AGJI wouldn't expect it to be fixed anytime soon but you can expect more add ons that will cost more money.
Leave a comment:
-
Originally posted by AGJSo that could be why I was able to get mine done and you having problems. Funny though that an older version works and the newest versions do not
March 15, 2011
DVDFab 8.0.8.2 Updated!
DVD Copy:
New: PathPlayer will be disabled automatically when it has problem with certain old discs.
Leave a comment:
-
Originally posted by AGJ View PostSorry for taking so long to reply back but I just finally had the time to try this out. So I tried Zorro Season 1 Disc 1 with Pathplayer Enabled/Disabled and no problems ripping to hard drive with DVDFab DVD Copy Full Disc DVD5 size just have not watched to see if it plays correctly.
I used the DVDFab 8.0.9.0 QT and Below is my info log for the DVD I tried and even though it says Pathplayer Disabled I have it set as Always Enabled
Info for drive [E:\] (DVDFab 8.0.9.0)
Vendor: HL-DT-ST
Product: DVD-RAM GH22LP20
Revision: 2.00
Vendor specific: 09/10/06 7U01
Drive region control: RPC II
Drive region: 1
User changes left: 4
Vendor resets left: 4
Disc media: DVD
Disc type: DVD-Video
Disc region: 1
Volume name: MCZ0NNW1
Video standard: NTSC
Layer 0 size: 2046464 sectors (3997 MBytes)
Layer 1 size: 2046464 sectors (3997 MBytes)
CSS (Content Scramble System) protection is removed!
RC (Region Code) protection is removed!
RCE (Region Code Enhancement) protection is not found.
APS (Analog Protection System) protection is removed!
UOPs (User Operation Prohibitions) protection is removed!
Invalid PTTs protection is not found.
Invalid PGCIs protection is not found.
Invalid PGCs protection is not found.
Invalid TMAPs protection is not found.
Invalid CELLs protection is removed!
Invalid VOBUs protection is removed!
Fake vts protection is not found!
Potential bad sector (vts:1 title begin:0 end:511) is removed!
Potential bad sector (vts:1 title begin:524 end:3847) is removed!
Potential bad sector (vts:2 title begin:0 end:511) is removed!
Potential bad sector (vts:2 title begin:524 end:3847) is removed!
Potential bad sector (vts:3 title begin:0 end:511) is removed!
Potential bad sector (vts:3 title begin:524 end:3847) is removed!
Potential bad sector (vts:4 title begin:0 end:511) is removed!
Potential bad sector (vts:4 title begin:524 end:3847) is removed!
Potential bad sector (vts:5 title begin:0 end:511) is removed!
Potential bad sector (vts:5 title begin:524 end:3847) is removed!
Potential bad sector (vts:6 title begin:0 end:511) is removed!
Potential bad sector (vts:6 title begin:524 end:3847) is removed!
Potential bad sector (vts:7 title begin:0 end:511) is removed!
Potential bad sector (vts:7 title begin:524 end:3847) is removed!
Potential bad sector (vts:8 title begin:0 end:511) is removed!
Potential bad sector (vts:8 title begin:524 end:3847) is removed!
Potential bad sector (vts:9 menu begin:0 end:186) is removed!
17 potential bad sector protections are removed!
Structure protection (ARccOS, RipGuard, etc.) is removed!
PathPlayer is disabled.
Kinda looks like your has different copy protection on it but try the latest DVDFab 8.0.9.2 QT and might just work
However, DVDFab v6218 reads the disc perfectly. When making a Full Disc copy it shows Quality 64% (6686 MB >4300 MB) and for DVD 9 it shows Quality 100% (6686 MB > 6686 MB).
Some sort of bug was introduced into DVDFab after v6218 that causes it to show that this DVD contains 38,967 GB of data. I don’t know at what point in DVDFab development the bug first showed up. I only discovered the solution because I had previously made a backup of this DVD when I first purchased it back in November, 2009. I was waiting to complete my set of Disney Treasure DVD’s before I did a complete archive to hard disc. When I attempted to backup this disc in March, 2011, the current DVDFab version wouldn’t work on this disc.
To this date the current DVDFab v8092 Qt still can't copy this disc correctly. I've sent logs to the DVDFab staff showing the problem but as I've stated, the old v6218 works perfectly on this disc.
Leave a comment:
-
Sorry for taking so long to reply back but I just finally had the time to try this out. So I tried Zorro Season 1 Disc 1 with Pathplayer Enabled/Disabled and no problems ripping to hard drive with DVDFab DVD Copy Full Disc DVD5 size just have not watched to see if it plays correctly.
I used the DVDFab 8.0.9.0 QT and Below is my info log for the DVD I tried and even though it says Pathplayer Disabled I have it set as Always Enabled
Info for drive [E:\] (DVDFab 8.0.9.0)
Vendor: HL-DT-ST
Product: DVD-RAM GH22LP20
Revision: 2.00
Vendor specific: 09/10/06 7U01
Drive region control: RPC II
Drive region: 1
User changes left: 4
Vendor resets left: 4
Disc media: DVD
Disc type: DVD-Video
Disc region: 1
Volume name: MCZ0NNW1
Video standard: NTSC
Layer 0 size: 2046464 sectors (3997 MBytes)
Layer 1 size: 2046464 sectors (3997 MBytes)
CSS (Content Scramble System) protection is removed!
RC (Region Code) protection is removed!
RCE (Region Code Enhancement) protection is not found.
APS (Analog Protection System) protection is removed!
UOPs (User Operation Prohibitions) protection is removed!
Invalid PTTs protection is not found.
Invalid PGCIs protection is not found.
Invalid PGCs protection is not found.
Invalid TMAPs protection is not found.
Invalid CELLs protection is removed!
Invalid VOBUs protection is removed!
Fake vts protection is not found!
Potential bad sector (vts:1 title begin:0 end:511) is removed!
Potential bad sector (vts:1 title begin:524 end:3847) is removed!
Potential bad sector (vts:2 title begin:0 end:511) is removed!
Potential bad sector (vts:2 title begin:524 end:3847) is removed!
Potential bad sector (vts:3 title begin:0 end:511) is removed!
Potential bad sector (vts:3 title begin:524 end:3847) is removed!
Potential bad sector (vts:4 title begin:0 end:511) is removed!
Potential bad sector (vts:4 title begin:524 end:3847) is removed!
Potential bad sector (vts:5 title begin:0 end:511) is removed!
Potential bad sector (vts:5 title begin:524 end:3847) is removed!
Potential bad sector (vts:6 title begin:0 end:511) is removed!
Potential bad sector (vts:6 title begin:524 end:3847) is removed!
Potential bad sector (vts:7 title begin:0 end:511) is removed!
Potential bad sector (vts:7 title begin:524 end:3847) is removed!
Potential bad sector (vts:8 title begin:0 end:511) is removed!
Potential bad sector (vts:8 title begin:524 end:3847) is removed!
Potential bad sector (vts:9 menu begin:0 end:186) is removed!
17 potential bad sector protections are removed!
Structure protection (ARccOS, RipGuard, etc.) is removed!
PathPlayer is disabled.
Kinda looks like your has different copy protection on it but try the latest DVDFab 8.0.9.2 QT and might just work
Leave a comment:
-
Originally posted by AGJ View Postthe 2 season set just arrived today and the bottom right corner of the box each set is in says 2006 DVD Release for the First Season and 2009 DVD Release for Second season.
So will give a try when I have the time as I have other movies that I am converting to PSP at the moment. Will have time this week end so will post my results once finished.
Your 1st season set dated 2006 is a different volume. See this link:
)
Nevertheless, it will be interesting to see if the 2006 version presents problems as well. I'll be standing by.
Leave a comment:
-
the 2 season set just arrived today and the bottom right corner of the box each set is in says 2006 DVD Release for the First Season and 2009 DVD Release for Second season.
So will give a try when I have the time as I have other movies that I am converting to PSP at the moment. Will have time this week end so will post my results once finished.
Leave a comment:
-
V8085 still can handle Zorro, The Complete First Season. When the first disc of the series is opened up by DVDFab, it shows the DVD 5 Quality at 10% (38,967 GB > 4300 MB) and it shows DVD 9 as Quality 20% (38,967 GB > 8100 MB).
Leave a comment:
-
Update
BINGO! I found the answer. I downloaded DVDFab 6218 and it had no problem making a full disk backup of Zorro, The Complete First Season. I still don’t know why the newest version of DVDFab has a problem with this disk but I have determined that this older version works!
For reasons unknown to me, the newer versions of DVDFab can not decrypt this DVD title.
Leave a comment:
-
Originally posted by AGJ View PostI plan on ordering both season sets of Zorro from Disney Movie Rewards as I have over 20,000 points with them and the Zorro 2 seasons are only about 4,500 points. Once they arrive I will give the first season a try to see what the problem
I recently bought several large hard drives and started to archive my collection when I ran into the current problem. After discovering the DVD backup I had made, I realized that an earlier version of DVDFab had been successful in making the backup. I most likely used version 6205 to make the original backup but it could also have been version 6218 or 7030. At any rate, it is clear that an earlier version of DVDFab had been completely successful in backing up disc one of Zorro, The Complete First Season. I still don’t understand why the current version fails.
Let me add that in order to get a working DVD using Passkey with ImgBurn, I first had to create an image file on my hard drive from the original disc and then write the image file from the hard drive to a DVD. Passkey/ImgBurn would not allow me to (build) write files/folders from the original disc to a DVD. I think there are just too many files on the original DVD and they have an odd structure.
Thanks to both you and sunny for all the help!Last edited by Senor Bag; 03-17-2011, 12:51 AM.
Leave a comment:
-
I plan on ordering both season sets of Zorro from Disney Movie Rewards as I have over 20,000 points with them and the Zorro 2 seasons are only about 4,500 points. Once they arrive I will give the first season a try to see what the problem
Leave a comment:
Leave a comment: