DVDFab v9.3.1.6: DVD Copy fails

Franek

DVD Fab ver 9.3.1.6 (official) failed to copy DVD The Leftovers Seazon 1 Disk 2. DVD Fab hangs around 4% or 6% and stops eventually.

Wilson.Wang

Please post the DVDFab internal log file, thanks!

Wilson

Franek

[QUOTE=Wilson.Wang;190123]Please post the DVDFab internal log file, thanks!

Wilson[/QUOTE]

The internal log:



DVDFab 9.3.1.6 (2016/09/21  22:24:00)



 0m 00.01s: Init Public log : enabled.

 0m 00.01s: Init Private log : finish.

 0m 00.01s: App info: 2016-9-19

 0m 00.01s: App info: 9.3.1.6 9316 Official

 0m 00.03s: Init CrashReportSettings : enabled.

 0m 00.03s: Init DVDInfo_Log : enabled.

 0m 00.03s: Init Qt_Log : disabled.

 0m 00.03s: --- 3D implement select : Use default implement ---

 0m 00.12s: Profile Manager :: Begin Load Profile 

 0m 00.12s: Qt Translator file load success 

 0m 00.13s: App info: client type 2.

 0m 00.16s: MobilePlay load: preload successful.

 0m 00.22s: MobilePlay load: Load successful.

 0m 00.22s: set code page : .0

 0m 00.22s: Init process: Transfer settings successful.

 0m 00.22s: info: check logpath= D:/Documents/DVDFab9/Log/

 0m 00.25s: info: _check_gpu is running ...

 0m 00.46s: info: check_gpu run successful 

 0m 00.46s: info: recommand= 56, Shrink support= 0, enable= 0, cuda_cap= 1 , cpu_count= 8

 0m 00.46s: GPU check: GPUAccelerate-0X39

 0m 00.46s: GPU check: GPUAccelerate setting-0X38, 0X38

 0m 00.46s: GPU check: CUDA cap-0X1

 0m 00.46s: GPU check: Support coreavc decode-0

 0m 00.46s: GPU check: Lighting shrink status-0, 0

 0m 00.46s: GPU check: Graphics info 1: NVIDIA GeForce GTX 275 : 9.18.13.4195 : 1.3

 0m 00.47s: Init process: Load config successful.

 0m 00.47s: Init process: Windows os type is 64bit System Windows 7.

 0m 00.47s: Init process: command line in is 

 0m 00.53s: Reg check: Option check status-Failed

 0m 00.53s: Reg check: ( HD Decrypter:1:0 )-( DVD to DVD (Gold):0:0 )-( DVD to DVD:0:0 )-( DVD to Mobile:0:0 )-( Blu-ray to Blu-ray:0:0 )-( Blu-ray to Mobile:0:0 )-( File to Mobile:0:0 )-( Blu-ray to DVD:0:0 )-( DVD to Blu-ray:0:0 )-( File to DVD:0:0 )-( File to Blu-ray:0:0 )-( File Mover:1:0 )-( Blu-ray to 3D:0:0 )-( 2D to 3D:1:0 )-( Blu-ray Decrypt:1:0 )-( DVD Decrypt:1:0 )-( CinaviaRemoval HD:0:0 )-

 0m 00.54s: App info: language type ENU.

 0m 00.54s: App info: Install path C:/Program Files (x86)/DVDFab 9/ 

 0m 00.84s: Reg check: Times of cinavia connecting error is: 0

 0m 00.84s: Reg check: Start get sys number.

 0m 00.85s: Reg check: Serial number is: e0-cb-4e-a1-f4-c7

 0m 00.85s: Reg check: Connect type is: 0

 0m 00.94s: Profile Manager :: End Load Profile 

 0m 01.56s: Reg check: Times of connecting error is: 0

 0m 01.56s: Reg check: Parse string: ( 2:8260762964 )( 11:8260762964 )( 20:8260762964 )( 50:8260762964 )( 21:8260762964 )( 22:8260762964 )( 55:8260762964 )( 60:8260762964 )( 70:8260762964 )( 61:8260762964 )( 62:8260762964 )( 95:8260762964 )( 91:8260762964 )( 92:8260762964 )( 1:0 )( OV:9316 )( BV:9315 )( S:440fd5c1c3b5a7eb91af3b87db789fe8

 0m 02.04s: Reg check: thread exit normal.

 0m 02.04s: Reg check: Option check status-NewWork

 0m 02.05s: Reg check: ( HD Decrypter:1:0 )-( DVD to DVD (Gold):0:0 )-( DVD to DVD:1:1 )-( DVD to Mobile:1:1 )-( Blu-ray to Blu-ray:1:1 )-( Blu-ray to Mobile:1:1 )-( File to Mobile:1:1 )-( Blu-ray to DVD:1:1 )-( DVD to Blu-ray:1:1 )-( File to DVD:1:1 )-( File to Blu-ray:1:1 )-( File Mover:1:0 )-( Blu-ray to 3D:1:1 )-( 2D to 3D:1:1 )-( Blu-ray Decrypt:1:0 )-( DVD Decrypt:1:0 )-( CinaviaRemoval HD:1:1 )-

 0m 02.05s: Reg check: connect successful and result code is 1.

 0m 02.05s: Reg check: End check info.

 0m 02.05s: Export Blu-ray source information report : enabled

 0m 02.05s: Init process: Init GPU settings successful.

 0m 02.05s: connect plugin info : start.

 0m 03.03s: connect plugin info : 1:1

 0m 03.77s: Init preview: Begin init preview play engine.

 0m 03.77s: Init preview: Begin init preview play engine(Internal).

 0m 04.27s: Init preview: Init internal engine successful.

 0m 05.17s: Burn engine: start init.

 0m 05.17s: Burn engine: set log folder.

 0m 05.18s: DVD: init read settings.

 0m 05.18s: DVD: init write settings.

 0m 05.18s: BD: init read settings.

 0m 05.18s: BD: init write settings.

 0m 05.18s: bd set region B

 0m 05.18s: Burn engine: config engine type-3 begin.

 0m 05.18s: Burn engine: config engine type-3 end.

 0m 05.19s: Burn engine: writer count 1.

 0m 05.19s: Burn engine: 0-Z:\ [ATAPI iHAS324B].

 0m 05.19s: Burn engine: end init.

 0m 05.80s: Init process: Init setting page successful.

 0m 05.81s: QtLog Mode = false 

 0m 05.81s: Show ProductsInfo Dlg 2 

 0m 23.67s: Show UI Step 3 

 0m 23.67s: Start show MainUI.

 0m 23.67s: UI manager: switch to Copy mode.

 0m 25.04s: Init process: init main ui successful.

 0m 25.70s: Init process: show main ui successful.

 0m 25.70s: DriveX msg: Init driveX X with I/O mode: 0

 0m 25.70s: DriveX msg: Init driveX Z with I/O mode: 0

 0m 25.71s: opening drive Z

 0m 25.71s: opened i/o

 0m 25.71s: got media type 4

 0m 27.82s: got max lba 3896407

 0m 27.83s: got disc type 10

 0m 27.87s: type DVD-VIDEO

 0m 27.87s: volume label THE_LEFTOVERS_SEASON_1_DISC_2

 0m 27.87s: DriveX msg: add media in driveX Z.

 0m 27.87s: DriveX msg: send open media msg to thread for driveX Z.

 0m 27.87s: opening drive X

 0m 27.88s: opened i/o

 0m 27.88s: Source manager:open source flag:1,1,1,1,1

 0m 27.88s: Source manager:open source flag:1,1,1,1,1

 0m 27.88s: Source manager:open source flag:1,1,1,1,1

 0m 27.89s: Source manager: add source id 0.

 0m 27.89s: Source open status:DVD Yes, 2231-10-11

 0m 27.89s: Source open status:BD Yes, 2231-10-11

 0m 27.90s: internal path Z:/VIDEO_TS/

 0m 27.90s: got copyright 1 e5

 0m 27.91s: key method 0

 0m 28.44s: got udf/iso

 0m 29.05s: got discinfo

 0m 29.06s: pathplayer enabled

 0m 29.63s: button: vts_1 menu_1 pgc_1 cell_1 start_0 end_1812 sector_60 count_3

 0m 35.73s: button: vts_1 menu_1 pgc_2 cell_1 start_1813 end_1868 sector_1813 count_5

 0m 40.77s: button: vts_1 menu_1 pgc_3 cell_1 start_1869 end_1924 sector_1869 count_15

 0m 40.95s: button: vts_1 menu_1 pgc_1 cell_1 start_1925 end_3737 sector_1985 count_3

 0m 41.10s: button: vts_1 menu_1 pgc_2 cell_1 start_3738 end_3793 sector_3738 count_5

 0m 41.13s: button: vts_1 menu_1 pgc_3 cell_1 start_3794 end_3849 sector_3794 count_15

 0m 44.12s: got dvdinfo

 0m 44.12s: opened dvd

 0m 45.11s: Source manager: open successful.

 0m 46.87s: Work manager: create DVD clone work 0 with source 0 and uiinfo 0.

 0m 46.90s: Source manager:open source flag:1,1,1,1,1

 1m 02.74s: Work manager: create DVD fulldisc work 1 with source 0 and uiinfo 1.

 1m 09.17s: Work manager: create DVD mainmoive work 2 with source 0 and uiinfo 2.

 1m 13.84s: Work manager: create DVD custom work 3 with source 0 and uiinfo 3.

 1m 24.84s: Work manager: create split work 4 with source 0 and uiinfo 4.

 3m 07.92s: UILog:OnMsgToolbar_Start

 3m 07.92s: UILog:Msg Start : ready start

 3m 07.92s: UILog:Msg Start : start test run work

 3m 07.93s: UILog:right button to null, work falg = -1

 3m 08.08s: UILog:Msg Start : run work

 3m 08.08s: UILog:Run current Work.

 3m 08.08s: UILog:Begin work copy or converter.

 3m 08.09s: UILog:start running at thread.

 3m 08.09s: UILog:return flag at start running at thread ok.

 3m 08.18s: UILog:MsgWork:WorkStatus_Start

 6m 00.59s: read error: 3 107517 3892656 243766 0 1 107517

 7m 37.42s: read error: 3 107517 3892656 243898 0 1 107517

 9m 40.93s: read error: 3 107517 3892656 244229 0 1 107517

11m 06.18s: read error: 3 107517 3892656 244229 0 1 107517

12m 31.44s: read error: 3 107517 3892656 244229 0 1 107517

13m 33.30s: UILog:MsgWork:current work finish : 2

13m 33.30s: UILog:Run Work to end.

244m 14.55s: DriveX msg: remove media in driveX Z.

244m 14.56s: Source manager:open source flag:1,0,1,1,1

244m 31.86s: opening drive Z

244m 31.86s: DriveX msg: media open(false) failed in driveX Z.

 0m 00.35s:

90312

From your log:

6m 00.59s: read error: 3 107517 3892656 243766 0 1 107517
7m 37.42s: read error: 3 107517 3892656 243898 0 1 107517
9m 40.93s: read error: 3 107517 3892656 244229 0 1 107517
11m 06.18s: read error: 3 107517 3892656 244229 0 1 107517
12m 31.44s: read error: 3 107517 3892656 244229 0 1 107517

That will prevent a backup copy.

Franek

[QUOTE=90312;190138]From your log:

6m 00.59s: read error: 3 107517 3892656 243766 0 1 107517
7m 37.42s: read error: 3 107517 3892656 243898 0 1 107517
9m 40.93s: read error: 3 107517 3892656 244229 0 1 107517
11m 06.18s: read error: 3 107517 3892656 244229 0 1 107517
12m 31.44s: read error: 3 107517 3892656 244229 0 1 107517

That will prevent a backup copy.[/QUOTE]

The disk doesn't have any scratches! It was the first I thing I checked.

90312

Can be the result of manufacturing defect(s), impossible to see those most of the time.

Rich86

Unfortunately, scratches are not the only reason a disc can be unreadable. It could be defective from the factory.

Franek

Could it be on purpose as a sort of protection?

fengtao

No.

3dman

Try version 8qt of Fab http://www.dvdfab.cn/mlink/download.php?g=DVDFAB8

Also try just main movie as if the read errors are in the menu part it may not effect main movie try it.

slickwilly6977

Same issue. Several discs stopping at 50%.

DVDFab 9.3.1.6 (2016/09/25 06:54:04)

0m 00.07s: Init Public log : enabled.
0m 00.07s: Init Private log : finish.
0m 00.07s: App info: 2016-9-19
0m 00.07s: App info: 9.3.1.6 9316 Official
0m 00.12s: Init CrashReportSettings : enabled.
0m 00.12s: Init DVDInfo_Log : enabled.
0m 00.12s: Init Qt_Log : disabled.
0m 00.12s: --- 3D implement select : Use default implement ---
0m 00.45s: Profile Manager :: Begin Load Profile
0m 00.45s: Qt Translator file load success
0m 00.45s: App info: client type 2.
0m 00.48s: MobilePlay load: preload successful.
0m 00.57s: MobilePlay load: Load successful.
0m 00.59s: set code page : .0
0m 00.59s: Init process: Transfer settings successful.
0m 00.59s: info: check logpath= C:/Users/Jamie/Documents/DVDFab9/Log/
0m 00.60s: info: _check_gpu is running ...
0m 02.34s: info: check_gpu run successful
0m 02.34s: info: recommand= 0, Shrink support= 0, enable= 0, cuda_cap= 0 , cpu_count= 4
0m 02.34s: GPU check: GPUAccelerate-0X0
0m 02.35s: GPU check: GPUAccelerate setting-0X0, 0X0
0m 02.35s: GPU check: CUDA cap-0X0
0m 02.35s: GPU check: Support coreavc decode-0
0m 02.35s: GPU check: Lighting shrink status-0, 0
0m 02.35s: GPU check: Graphics info 1: AMD Radeon HD 6700 Series : 15.201.1151.1008 :
0m 02.35s: Init process: Load config successful.
0m 02.35s: Init process: Windows os type is 64bit System Windows XP.
0m 02.37s: Init process: command line in is
0m 02.51s: Reg check: Parse string: ( 2:8260762964 )( 11:8260762964 )( 1:0 )( OV:9316 )( BV:9315 )( S:0d9cee0b4c2d433c10351249b0ccecb8 )
0m 02.53s: Reg check: Option check status-Local
0m 02.54s: Reg check: ( HD Decrypter:1:0 )-( DVD to DVD (Gold):0:0 )-( DVD to DVD:1:1 )-( DVD to Mobile:1:1 )-( Blu-ray to Blu-ray:0:0 )-( Blu-ray to Mobile:0:0 )-( File to Mobile:0:0 )-( Blu-ray to DVD:0:0 )-( DVD to Blu-ray:0:0 )-( File to DVD:0:0 )-( File to Blu-ray:0:0 )-( File Mover:1:0 )-( Blu-ray to 3D:0:0 )-( 2D to 3D:1:0 )-( Blu-ray Decrypt:1:0 )-( DVD Decrypt:1:0 )-( CinaviaRemoval HD:0:0 )-
0m 02.54s: App info: language type ENU.
0m 02.54s: App info: Install path C:/Program Files (x86)/DVDFab 9/
0m 02.54s: Export Blu-ray source information report : enabled
0m 02.54s: Init process: Init GPU settings successful.
0m 02.54s: connect plugin info : start.
0m 02.70s: Reg check: Times of cinavia connecting error is: 0
0m 02.70s: Reg check: Start get sys number.
0m 02.70s: Reg check: Serial number is: 3c-d9-2b-5c-42-c0:00-02-72-a3-39-97
0m 02.70s: Reg check: Connect type is: 0
0m 02.93s: connect plugin info : 1:1
0m 03.10s: Reg check: Times of connecting error is: 0
0m 03.10s: Reg check: Parse string: ( S:137df157ad3201ec9ee7e8a575a3258e
0m 03.12s: Reg check: Option check status-NewWork
0m 03.12s: Reg check: ( HD Decrypter:1:0 )-( DVD to DVD (Gold):0:0 )-( DVD to DVD:1:1 )-( DVD to Mobile:1:1 )-( Blu-ray to Blu-ray:1:0 )-( Blu-ray to Mobile:1:0 )-( File to Mobile:1:0 )-( Blu-ray to DVD:1:0 )-( DVD to Blu-ray:1:0 )-( File to DVD:1:0 )-( File to Blu-ray:1:0 )-( File Mover:1:0 )-( Blu-ray to 3D:1:0 )-( 2D to 3D:1:0 )-( Blu-ray Decrypt:1:0 )-( DVD Decrypt:1:0 )-( CinaviaRemoval HD:1:0 )-
0m 04.06s: Profile Manager :: End Load Profile
0m 04.40s: Init preview: Begin init preview play engine.
0m 04.40s: Init preview: Begin init preview play engine(Internal).
0m 05.78s: Init preview: Init internal engine successful.
0m 07.51s: Burn engine: start init.
0m 07.51s: Burn engine: set log folder.
0m 07.51s: DVD: init read settings.
0m 07.51s: DVD: init write settings.
0m 57.89s: BD: init read settings.
0m 57.89s: BD: init write settings.
0m 57.90s: bd set region A
0m 57.90s: Burn engine: config engine type-0 begin.
0m 57.90s: Burn engine: config engine type-0 end.
0m 57.90s: Burn engine: writer count 2.
0m 57.90s: Burn engine: 0- E:\ [HL-DT-ST BD-RE WH14NS40 1.01 (Scsi)].
0m 57.90s: Burn engine: 1- F:\ [ATAPI iHAS424 B GL1A (Scsi)].
0m 57.90s: Burn engine: end init.
0m 59.14s: Init process: Init setting page successful.
1m 06.10s: QtLog Mode = false
1m 06.10s: Show ProductsInfo Dlg 2
1m 13.53s: Show UI Step 3
1m 13.53s: Start show MainUI.
1m 13.53s: UI manager: switch to Copy mode.
1m 16.38s: Init process: init main ui successful.
1m 17.84s: Init process: show main ui successful.
1m 17.85s: DriveX msg: Init driveX E with I/O mode: 0
1m 17.85s: DriveX msg: Init driveX F with I/O mode: 0
1m 17.86s: opening drive E
1m 17.88s: opened i/o
1m 17.88s: got media type 14
1m 17.88s: got max lba 0
1m 17.88s: DriveX msg: media open(false) failed in driveX E.
1m 17.88s: opening drive F
1m 17.89s: opened i/o
1m 17.89s: got media type 4
1m 18.21s: got max lba 4075926
1m 18.22s: got disc type 10
1m 18.26s: type DVD-VIDEO
1m 18.26s: volume label CHICAGO_FIRE
1m 18.26s: DriveX msg: add media in driveX F.
1m 18.26s: DriveX msg: send open media msg to thread for driveX F.
1m 18.26s: Source manager:open source flag:1,1,1,1,1
1m 18.26s: Source manager:open source flag:1,1,1,1,1
1m 18.27s: Source manager:open source flag:1,1,1,1,1
1m 18.29s: Source manager: add source id 0.
1m 18.30s: Source open status:DVD Yes, 2231-10-11
1m 18.31s: Source open status:BD Yes, 2158-1-1
1m 18.31s: internal path F:/VIDEO_TS/
1m 18.31s: got copyright 1 f6
1m 18.32s: key method 0
1m 18.83s: got udf/iso
1m 20.81s: got discinfo
1m 20.82s: pathplayer enabled
1m 21.57s: button: vts_9 menu_1 pgc_15 cell_1 start_62 end_532 sector_130 count_8
1m 27.20s: button: vts_9 menu_1 pgc_20 cell_1 start_533 end_592 sector_533 count_6
1m 36.08s: button: vts_9 menu_1 pgc_14 cell_1 start_4 end_61 sector_4 count_7
1m 36.11s: button: vts_9 menu_1 pgc_51 cell_1 start_593 end_641 sector_593 count_2
1m 38.91s: got dvdinfo
1m 38.92s: opened dvd
1m 40.71s: Source manager: open successful.
1m 45.19s: Work manager: create DVD fulldisc work 0 with source 0 and uiinfo 0.
1m 45.97s: Source manager:open source flag:1,1,1,1,1
1m 53.24s: UILog:OnMsgToolbar_Start
1m 53.24s: UILog:Msg Start : ready start
1m 53.25s: UILog:Msg Start : start test run work
1m 53.25s: UILog:right button to null, work falg = -1
1m 53.41s: UILog:Msg Start : run work
1m 53.42s: UILog:Run current Work.
1m 53.42s: UILog:Begin work copy or converter.
2m 08.01s: UILog:start running at thread.
2m 08.02s: UILog:return flag at start running at thread ok.
2m 12.21s: Burn data size is: 7832
2m 12.21s: Burn disc space is: 8152
2m 12.57s: UILog:MsgWork:WorkStatus_Start
2m 12.66s: DVD Copy
2m 12.66s: Source: F:/
2m 12.66s: SourceSize: 7833 MB
2m 12.66s: OutputSize: 8100 MB
24m 28.21s: DriveX msg: remove media in driveX F.
24m 28.22s: UILog:MsgWork:WorkStatus_Start
24m 30.66s: burn folder C:\Users\Jamie\Documents\DVDFab9\Temp\FullDisc\CHICAGO_FIRE\ with VSO
24m 31.15s: Source manager:open source flag:1,0,1,1,1
38m 24.33s: DriveX msg: remove media in driveX E.
38m 27.17s: Source manager:open source flag:1,0,1,1,1
40m 20.84s: UILog:MsgWork:current work finish : 2
40m 20.84s: UILog:Run Work to end.
40m 43.47s: Source manager:open source flag:1,1,1,1,1

90312

slickwilly6977, your log indicates you're running Windows XP if so you need this version of DVDFab: http://forum.dvdfab.cn/showthread.php?p=189114#post189114

slickwilly6977

The computer was upgraded to Windows 10. Not sure why it was reading xp. The computer never had xp. Started out as Windows 8.

3dman

slickwilly6977 Try updating your Pioneers firmware it's old and 2 versions out of date.Also your other drive is also out of date on the firmwear go here to get the newest firmwear for both drives then try again.