Can't burn using DVDFab

[maineman]

Yup, same advice we gave on the first page starting with post #6 by Gruñón.

Please revisit post #9 in which I posted some links to help you out.
Start with the MS site...deleting upper and lower filters

[90312]

One of the reasons Imgburn is having a problem is the same as FAB.

Something has your drive locked and both FAB and Imgburn cannot access it.
*********************
W 06:33:00 DeviceIoControl(IOCTL_CDROM_EXCLUSIVE_ACCESS, Lock, 1) Failed! - Reason: The handle is invalid.
****************************

Agreed and DVD Studio Pro:4.0.3 is a disk writing program listed prior to the burn attempt.

[CBR929]

steinkampg your media is junk to most experienced users, Sorry If you want quality media use Taiyo Yuden which can be bought on line and Verbatim which can also be bought on line and most stores that sell electronics.

[steinkampg]

What DL media are you using?
The only only consistently recommended DL media is Verbatim +R DL.
The MIDs are MKM 001 (2.4-4X) and MKM 003 (up to 8X).
Try for the stuff made in Singapore (MIS) as opposed to made in India (MII)

You can try reloading your drivers.

If this doesn't work, try unticking
Disable Media Change Notification in Img settings.

I got the IO error and burn failure using Memorex +R DL (they show as Ritek -S04-66) w/ ImgBurn set at 8X.

I also used a TDK -R SL at 8X and it worked fine w/ ImgBurn, but only after I selected "Continue" when confronted with this message:

Unable to lock volume for exclusive access
Reason: the handle is invalid
Do you want to try again

I have unchecked Disable Media Change Notification and will try another DL

[CBR929]

I agree with Gruñón more and more I am seeing these filters which I believe are causing drive lock or crashes in Fab.

One of the reasons Imgburn is having a problem is the same as FAB.

Something has your drive locked and both FAB and Imgburn cannot access it.
*********************
W 06:33:00 DeviceIoControl(IOCTL_CDROM_EXCLUSIVE_ACCESS, Lock, 1) Failed! - Reason: The handle is invalid.
****************************

[maineman]

What DL media are you using?
The only only consistently recommended DL media is Verbatim +R DL.
The MIDs are MKM 001 (2.4-4X) and MKM 003 (up to 8X).
Try for the stuff made in Singapore (MIS) as opposed to made in India (MII)

You can try reloading your drivers.

If this doesn't work, try unticking
Disable Media Change Notification in Img settings.

[CBR929]

steinkampg slow your burn speed to 1/2 the rated speed of your disc's as outlined in the tutorial for setting up ImgBurn for the media you are using.

[steinkampg]

Well I spoke too soon. While DVD SL worked OK I got a failure using DVD DL.

I got an IO error just about 5 minutes after beginning the burn w/ ImgBurn. I do not see where there is a log of the error, or I would have posted it.

Once again though, lucky for me, I was able to burn the .iso using Nero since I hav not checked the box for it to be deleted.

[90312]

I don't know for sure, never seen this before but I got a hunch this Apple program is gumming up the works:

I 06:31:50 Source File Application Identifier: DVD Studio Pro:4.0.3, DSPInterface:382, DVDAuthoring:372, DVDBase:396(Encoder: 483), Oxygene:409
I 06:31:50 Source File Implementation Identifier: Apple Computer, Inc.

[steinkampg]

I loaded and set up ImgBurn and it worked w DVDfab, w/ only one anomaly (maybe ?).

Here is the Filter Driver Load Order info from ImgBurn.

************
===============================================
Filter Driver Load Order - ImgBurn v2.5.0.0
===============================================

Upper Device Filter: redbook
Upper Class Filter: SiRemFil
Device: CD/DVD-ROM Device
Lower Class Filter: ElbyCDFL
Lower Class Filter: PxHelp20
Lower Device Filter: imapi

Filter Name: redbook
File Name: C:\WINDOWS\system32\DRIVERS\redbook.sys
File Version: 5.1.2600.5512 (xpsp.080413-2108)
File Description: Redbook Audio Filter Driver
Product Name: Microsoft® Windows® Operating System
Product Version: 5.1.2600.5512
Company Name: Microsoft Corporation
Copyright: © Microsoft Corporation. All rights reserved.

Filter Name: SiRemFil
File Name: C:\WINDOWS\system32\DRIVERS\SiRemFil.sys
File Version: 1, 1, 4, 0 [1.1.4.0]
File Description: Filter driver for Silicon Image SATALink controllers.
Product Name:
Product Version: 1, 0, 0, 0 [1.0.0.0]
Company Name: Silicon Image, Inc.
Copyright: Copyright (C) 2005-2006 Silicon Image, Inc.

Filter Name: ElbyCDFL
File Name: C:\WINDOWS\System32\Drivers\ElbyCDFL.sys
File Version: 4, 0, 0, 0 [4.0.0.0]
File Description: ElbyCDIO Filter Driver
Product Name: CloneCD
Product Version: 4, 0, 0, 0 [4.0.0.0]
Company Name: Elaborate Bytes
Copyright: Copyright (C) 2001, 2002 Elaborate Bytes AG

Filter Name: PxHelp20
File Name: C:\WINDOWS\system32\DRIVERS\PxHelp20.sys
File Version: 2.02.53a [2.2.53.0]
File Description: Px Engine Device Driver for Windows 2000/XP
Product Name: PxHelp20
Product Version: [2.0.0.0]
Company Name: Sonic Solutions
Copyright: Copyright © Sonic Solutions

Filter Name: imapi
File Name: C:\WINDOWS\system32\DRIVERS\imapi.sys
File Version: 5.1.2600.5512 (xpsp.080413-2108)
File Description: IMAPI Kernel Driver
Product Name: Microsoft® Windows® Operating System
Product Version: 5.1.2600.5512
Company Name: Microsoft Corporation
Copyright: © Microsoft Corporation. All rights reserved.
**********************

After task 1 completed OK, ImgBurn opened and gave me this message:

************************
Unable to lock volume for exclusive access
Reason: the handle is invalid
Do you want to try again
********************

I selected "yes" and then it burned the DVD-R. I used a single layer this time.

Here is my the ImgBurn log from this session, Note the Bold lines:

**************
I 06:31:46 ImgBurn Version 2.5.0.0 started!
I 06:31:46 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)
I 06:31:46 Total Physical Memory: 2,030,828 KB - Available: 1,173,920 KB
I 06:31:46 Initialising SPTI...
I 06:31:47 Searching for SCSI / ATAPI devices...
I 06:31:48 Found 1 CD-RW and 2 DVD±RW/RAMs!
I 06:31:49 Operation Started!
I 06:31:49 Source File: C:\Documents and Settings\Glen\My Documents\DVDFab\Temp\Clone\WEBB_WILDER_MASTER_DVD .iso
I 06:31:49 Source File Sectors: 2,122,292 (MODE1/2048)
I 06:31:50 Source File Size: 4,346,454,016 bytes
I 06:31:50 Source File Volume Identifier: WEBB_WILDER_MASTER_DVD
I 06:31:50 Source File Volume Set Identifier: 34E63999
I 06:31:50 Source File Application Identifier: DVD Studio Pro:4.0.3, DSPInterface:382, DVDAuthoring:372, DVDBase:396(Encoder: 483), Oxygene:409
I 06:31:50 Source File Implementation Identifier: Apple Computer, Inc.
I 06:31:50 Source File File System(s): ISO9660, UDF (1.02)
I 06:31:50 Destination Device: [3:0:0] Optiarc DVD RW AD-7220A 1.02 (D (ATA)
I 06:31:50 Destination Media Type: DVD-R (Disc ID: RITEKF1) (Speeds: 4x, 6x, 8x, 12x, 16x)
I 06:31:50 Destination Media Sectors: 2,297,888
I 06:31:50 Write Mode: DVD
I 06:31:50 Write Type: DAO
I 06:31:50 Write Speed: MAX
I 06:31:50 Link Size: Auto
I 06:31:50 Lock Volume: Yes
I 06:31:50 Test Mode: No
I 06:31:50 OPC: No
I 06:31:50 BURN-Proof: Enabled
W 06:31:50 DeviceIoControl(IOCTL_STORAGE_MCN_CONTROL) Failed! - Media change notification has NOT been disabled.
W 06:33:00 DeviceIoControl(IOCTL_CDROM_EXCLUSIVE_ACCESS, Lock, 1) Failed! - Reason: The handle is invalid.
I 06:33:01 Filling Buffer... (40 MB)
I 06:33:02 Writing LeadIn...
I 06:33:39 Writing Session 1 of 1... (1 Track, LBA: 0 - 2122291)
I 06:33:39 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2122291)
I 06:38:23 Synchronising Cache...
I 06:38:41 Exporting Graph Data...
I 06:38:41 Graph Data File: C:\Documents and Settings\Glen\Application Data\ImgBurn\Graph Data Files\Optiarc_DVD_RW_AD-7220A_1.02_SATURDAY-FEBRUARY-27-2010_6-31_AM_RITEKF1_MAX.ibg
I 06:38:41 Export Successfully Completed!
I 06:38:41 Operation Successfully Completed! - Duration: 00:06:42
I 06:38:41 Average Write Rate: 14,945 KB/s (10.8x) - Maximum Write Rate: 21,398 KB/s (15.4x)
I 06:38:41 Close Request Acknowledged
I 06:38:41 Closing Down...
I 06:38:41 Shutting down SPTI...
I 06:38:41 ImgBurn closed!

******

If anyone can give me ideas on how to prevent this, that would be great, but if not I want to THANK "Gunon, maineman and CBR929" VERY MUCH!

[maineman]

Man I Have to Learn How To Type!!! Sorry for posting the samething Maineman

Trust me, you can't possibly type worse than me!...lol

[CBR929]

steinkampg
Install ImgBurn as suggested then go to Tools / Filter Driver Load Order/ Copy to Clipboard and post back with results.

Man I Have to Learn How To Type!!! Sorry for posting the samething Maineman

[maineman]

As suggested, I'd try Img and see what happens.
CBR929 posted the link for you...^^

Also, when opening Img, take a look at your upper and lower filters.
Post them here so we can take a look.

Re: deleting upper and lower filters:

http://support.microsoft.com/kb/314060/EN-US

If you're still running into problems...

MS SysInternals > Process Explorer:

http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx

Unlocker:

http://ccollomb.free.fr/unlocker/#description

Ok I now see you tried V6.2.1.8.

All I can see is that both versions say the burner is in use.
You need to do some looking to see what has locked the drive.

Maybe now someone else can offer some insight from the log.