Announcement

Collapse
No announcement yet.

Help Badly Needed

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • DarthCopier
    replied
    Originally posted by oldpacman View Post
    Restarted computer, ran Fab6, still same message about "no writable media in burner. Thought you might need to know I am running Windows 7. Did getwinofrom Imgburn beforecomputer started Fab6, unsure what it means. also thought this might help, filterappears to still be ther even though tried to remove per all your instuctions

    I 12:50:35 ImgBurn Version 2.5.0.0 started!
    I 12:50:35 Microsoft Windows 7 Home Premium Edition (6.1, Build 7600)
    I 12:50:35 Total Physical Memory: 3,668,472 KB - Available: 2,409,680 KB
    W 12:50:35 Drive M:\ (FAT32) does not support single files > 4 GB in size.
    I 12:50:35 Initialising SPTI...
    I 12:50:35 Searching for SCSI / ATAPI devices...
    I 12:50:35 Found 1 DVD-ROM and 2 DVD±RW/RAMs!
    Dont know about the mentioned Drive M, not sure where it is and do not use it in trying to run Fab 6

    Please go back to Imgburn and re-check the "Drive Load Order" just to confirm whether the filter (driver) is there or not...

    If it's still there, try again to remove it directly with Imgburn from the screen you're in, then reboot, and check again...

    If that doesn't work, you'll have to remove whatever the program is that put it there... it'll be a program by Arcsoft...don't know which one...

    Please advise.

    DC

    Leave a comment:


  • oldpacman
    replied
    Reply

    Originally posted by AGJ View Post
    Did you restart computer after you deleted the filter. I should have mentioned that as well but forgot
    Restarted computer, ran Fab6, still same message about "no writable media in burner. Thought you might need to know I am running Windows 7. Did getwinofrom Imgburn beforecomputer started Fab6, unsure what it means. also thought this might help, filterappears to still be ther even though tried to remove per all your instuctions

    I 12:50:35 ImgBurn Version 2.5.0.0 started!
    I 12:50:35 Microsoft Windows 7 Home Premium Edition (6.1, Build 7600)
    I 12:50:35 Total Physical Memory: 3,668,472 KB - Available: 2,409,680 KB
    W 12:50:35 Drive M:\ (FAT32) does not support single files > 4 GB in size.
    I 12:50:35 Initialising SPTI...
    I 12:50:35 Searching for SCSI / ATAPI devices...
    I 12:50:35 Found 1 DVD-ROM and 2 DVD±RW/RAMs!
    Dont know about the mentioned Drive M, not sure where it is and do not use it in trying to run Fab 6

    Leave a comment:


  • AGJ
    replied
    Did you restart computer after you deleted the filter. I should have mentioned that as well but forgot

    Leave a comment:


  • oldpacman
    replied
    Reply

    Did as you instructed. Clicked on filter, requested removal, got message warning about some programs not working. Clicked on okay to remove, but does not appear filter was removed.

    Tried DVDFab6 but still get message that writable media is not recognized. Am using Vertaim DVD-R 16X discs.

    Leave a comment:


  • AGJ
    replied
    Right click the ImgBurn desktop icon and select run as administrator. Once ImgBurn opens click tools-Filter Drive Load Order-select the filter I listed below and then click remove selected filter. Once this filter is removed the program that installed it may not work anymore so might be better to find out which program installed the filter and use the programs uninstall to remove the program from computer.

    Code:
    Filter Name: Afc
    File Name: C:\Windows\system32\drivers\Afc.sys
    File Version: 1, 0, 0, 2 [1.0.0.2]
    File Description: Arcsoft(R) ASPI Shell
    Product Name: Arcsoft(R) ASPI Shell
    Product Version: 1, 0, 0, 2 [1.0.0.2]
    Company Name: Arcsoft, Inc.
    Copyright: (C) Arcsoft, Inc. 1999-2005. All rights reserved.

    Leave a comment:


  • oldpacman
    replied
    Reply

    Originally posted by PSYCOROCK View Post
    i had the same problem i put in new drive and worked fine i think your drives just goin...
    Thanks for the suggestion but have tried on external and internal burnes plusburner on laptop. All three say the same thing. Doubtful all three burners wouldgo bad at same time.

    Oldpacman

    Leave a comment:


  • oldpacman
    replied
    Reply

    Originally posted by DarthCopier View Post
    You never will find the 'clipboard' - it is term used by windows for a temp. storage area... to get the info from Imgburn to us:

    1.) In Imgburn, go to 'Tools' > 'Driver Load Order', and a text listing will show up in the Img window.

    2.) Starting at the top left of that program window, right-click and HOLD IT clicked, and drag it first to the end of the line, then drag it down to the bottom of the list. All the text in that window should now be high-lighted.

    3.) Holding the cursor over the last letter of text, right-click and select & click 'Copy'.

    4.) When you are creating a post here, right-click when ready to include the text, select & click 'Paste', and it'll be included in your post.

    Re Windows Explorer, go to 'Start' > 'All Programs' > 'Accessories' > 'Windows Explorer' and left-click on it.

    When it's running, left-click on My Computer, and look at the letter designation that is your DVD drive. If the name of the film in some form is there, then Explorer is recognizing the disk, and we can eliminate that as a possible problem. If not, we'll let you know the next step.

    P.S. - I'm an old man, too.

    DC



    P.P.S. Also not thrilled to hear you're using a Lappy... they overheat too fast, and the drives they install (DVD drives, that is) are crappy and short-lived... you may want to consider getting a new drive to use as an external drive, hooked in by USB...
    Have tried what you suggested. Windows explorer does not show title of film. Show a statement that disc is copy protected. Also get message wanting to know about using as a USB or burn to DVD.

    Have a desktop "HP" that I use all the time.Also have laptop and notebook that are used for back up if desktop fails.
    ===============================================
    Filter Driver Load Order - ImgBurn v2.5.0.0
    ===============================================

    Upper Device Filter: [None Found]
    Upper Class Filter: GEARAspiWDM
    Device: CD/DVD-ROM Device
    Lower Class Filter: Afc
    Lower Class Filter: PxHelp20
    Lower Device Filter: [None Found]

    Filter Name: GEARAspiWDM
    File Name: C:\Windows\System32\Drivers\GEARAspiWDM.sys
    File Version: 2.02.00.01 [2.2.0.1]
    File Description: CD DVD Filter
    Product Name: CD DVD Filter
    Product Version: 2.02.00.01 [2.2.0.1]
    Company Name: GEAR Software Inc.
    Copyright: Copyright (C) GEAR Software Inc. 1997-2009

    Filter Name: Afc
    File Name: C:\Windows\system32\drivers\Afc.sys
    File Version: 1, 0, 0, 2 [1.0.0.2]
    File Description: Arcsoft(R) ASPI Shell
    Product Name: Arcsoft(R) ASPI Shell
    Product Version: 1, 0, 0, 2 [1.0.0.2]
    Company Name: Arcsoft, Inc.
    Copyright: (C) Arcsoft, Inc. 1999-2005. All rights reserved.

    Filter Name: PxHelp20
    File Name: C:\Windows\System32\Drivers\PxHelp20.sys
    File Version: 3.00.90.2 [3.0.90.2]
    File Description: Px Engine Device Driver for Windows 2000/XP
    Product Name: PxHelp20
    Product Version: [2.0.0.0]
    Company Name: Sonic Solutions
    Copyright: Copyright © Sonic Solutions

    Leave a comment:


  • PSYCOROCK
    replied
    i had the same problem i put in new drive and worked fine i think your drives just goin...

    Leave a comment:


  • DarthCopier
    replied
    Originally posted by oldpacman View Post
    Thank you for advice. I am aware of copy and paste and how to use them. However, when a person cannot find the clipboard once it is clicked upon, what does a person do?

    Step by step help would be appreciated.

    You never will find the 'clipboard' - it is term used by windows for a temp. storage area... to get the info from Imgburn to us:

    1.) In Imgburn, go to 'Tools' > 'Driver Load Order', and a text listing will show up in the Img window.

    2.) Starting at the top left of that program window, right-click and HOLD IT clicked, and drag it first to the end of the line, then drag it down to the bottom of the list. All the text in that window should now be high-lighted.

    3.) Holding the cursor over the last letter of text, right-click and select & click 'Copy'.

    4.) When you are creating a post here, right-click when ready to include the text, select & click 'Paste', and it'll be included in your post.

    Re Windows Explorer, go to 'Start' > 'All Programs' > 'Accessories' > 'Windows Explorer' and left-click on it.

    When it's running, left-click on My Computer, and look at the letter designation that is your DVD drive. If the name of the film in some form is there, then Explorer is recognizing the disk, and we can eliminate that as a possible problem. If not, we'll let you know the next step.

    P.S. - I'm an old man, too.

    DC



    P.P.S. Also not thrilled to hear you're using a Lappy... they overheat too fast, and the drives they install (DVD drives, that is) are crappy and short-lived... you may want to consider getting a new drive to use as an external drive, hooked in by USB...
    Last edited by DarthCopier; 03-15-2010, 02:16 AM.

    Leave a comment:


  • AGJ
    replied
    Originally posted by oldpacman View Post
    Thank you for advice. I am aware of copy and paste and how to use them. However, when a person cannot find the clipboard once it is clicked upon, what does a person do?

    Step by step help would be appreciated.
    clipboard is copy then you paste to your next post reply

    Leave a comment:


  • oldpacman
    replied
    Originally posted by AGJ View Post
    once you save to clipboard all you do is right click and select paste to your post reply
    Thank you for advice. I am aware of copy and paste and how to use them. However, when a person cannot find the clipboard once it is clicked upon, what does a person do?

    Step by step help would be appreciated.

    Leave a comment:


  • AGJ
    replied
    once you save to clipboard all you do is right click and select paste to your post reply

    Leave a comment:


  • oldpacman
    replied
    Reply concerning inqbility to copy

    Originally posted by DarthCopier View Post
    Do the discs show up in Windows Explorer?

    Do you have any other software on your system related to disk copying and/or burning?

    Using Imgburn, please go to 'Tools' > 'Driver Load Order' and please post the info you find there.


    DC

    I am unsure on how to check if disc show up in windows explorer. Please instruct on how to accomplish this.

    Have Roxio My DVD Video Lab 10 and Windows DVD Maker on my system. However, I believe they were present long before problems started.

    As per Imgburn, followed your instructions but I don't know how to get info to this message, I clicked on Clipboard in Imgburn but unable to find info. Need step by step instruction on how to get info to you.

    See, I told you that you were helping out an old dummy. Thanks for everything so far that you have done to help me.

    oldpacman

    Leave a comment:


  • DarthCopier
    replied
    Originally posted by oldpacman View Post
    Goto keep trying

    Do the discs show up in Windows Explorer?

    Do you have any other software on your system related to disk copying and/or burning?

    Using Imgburn, please go to 'Tools' > 'Driver Load Order' and please post the info you find there.


    DC

    Leave a comment:


  • oldpacman
    replied
    Reply

    Goto keep trying
    Originally posted by DarthCopier View Post
    The HP and the Memorex don't surprise me re your problem, but the Verbatim do surprise me.

    I'm not sure why, but many people seem to have problems with the VSO burner supplied with DVDFab...(I never had any, but that's another story...).

    Please download Imgburn from the web (a freebie), and we'll try using it. There is a tutorial in this forum for setting up Imgburn for use with Fab (basically, just a couple of small adjustments).

    Can you also please include a burn log (any one will do) - location C:\Documents & Settings\Your Name\My Documents\DVDFab\Logs\BurnLog with your next post, as there are certain details there I'd like to see.

    DC

    Leave a comment:

Working...
X