DVD Ripper [8076] mkv.h264.ac3 and mt2s.ac3.xxx audio not in correct channels

[mjrtoo]

I've experienced this same issue in both beta builds 8075 and 8076, I couldn't even rip subtitles correctly with the current released version so I never even tried until these betas were available. When I rip at either of the above project specs, and seemingly at any video/audio bitrate, the audio is in the incorrect channels. It seems that the center channel is in the left rear and there is absolutely nothing in the right rear, and the front L/R sound like they should be the rear L/R.

I also notice that the .mkv when played back is zoomed out to fill the display aspect ratio, which obviously results in loss of the subtitle text and stretching of the picture. With identical settings, the .mt2s file plays back in the correct aspect ratio.

System is as follows:
Samsung SH-L123R DVD Drive
AMD Radeon HD 6850 video card (ripping with DXVA)
Enable Lightening-Recording is enabled

Has anyone experienced this, or have any advice that I might try? Here is a screen shot of the settings that have the audio issue.



Thank you,

Matt

[AGJ]

Could you post the internal logs for the problem try and they located in document-dvdfab-log

[mjrtoo]

Here's the internal log for the 8076 tasks, the video looks great, the subtitles work great, just the dang audio now.

DVDFab 8.0.7.6 (2011/02/25 14:32:58)

0m 01.32s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1
0m 05.77s: detected blu-ray
0m 05.77s: drive D
0m 05.77s: blu-ray type 1
0m 05.77s: volume label IP_MAN
0m 06.59s: root 0306FC4D IP_MAN:IP_MAN:IP_MAN:IP_MAN
0m 07.12s: aacs 1 bd+ 0
0m 07.62s: got discinfo
0m 08.86s: got bdmv
0m 08.86s: got agid 1
0m 08.92s: sent host cert chal
0m 08.93s: got drive cert chal
0m 08.93s: BEC 0
0m 08.93s: DRIVE_VENDOR 0x0386
0m 09.01s: got drive key
0m 09.65s: got host key signature
0m 09.65s: verified drive signature
0m 09.65s: verified host signature
0m 09.73s: sent host signature and key point
0m 09.73s: got bus key
0m 10.98s: got volume id
0m 10.98s: got volume id mac
0m 10.98s: volume id is correct
0m 10.99s: got vid
0m 11.07s: blu-ray E971A3A0E0A243C9BFA1DADABC19F1F1351F1F93
0m 12.01s: D 8516C9A6
0m 12.01s: got vuk
0m 12.68s: got unit key 1
0m 21.04s: got extended bdinfo
0m 21.04s: opened blu-ray
5m 12.73s:


------ begin mobile work(1/1) ------


5m 12.73s: create config(5)
5m 12.73s: convert profile(mkv.h264.ac3)
5m 12.73s: blu-ray playlist(0) angle(0) chapter(5->5)
5m 12.73s: stream(4113,AVC,1) stream(4354,DTS-HD MA,1) stream(4609,PGS,4)
5m 15.23s: info: set output video frame_rate(24/1)
5m 15.23s: subpicture preset(1), mode(0)
5m 15.26s: processing source(00000.m2ts)
5m 15.27s: try to use gpu acceleration(2) for video decoding
5m 15.27s: DXVA GPU acceleration for video decoding enabled
5m 16.32s: h264_encode: encode param profile(2) level(51) bitrate(6000)
5m 18.35s: subpicture(4609) mode(0)
5m 18.35s: connect to sub render filter
9m 56.18s:


------ finish mobile work ------




DVDFab 8.0.7.6 (2011/02/25 14:43:44)

0m 01.40s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1
0m 03.47s: detected blu-ray
0m 03.47s: drive D
0m 03.47s: blu-ray type 1
0m 03.49s: volume label IP_MAN
0m 04.21s: root 0306FC4D IP_MAN:IP_MAN:IP_MAN:IP_MAN
0m 04.54s: aacs 1 bd+ 0
0m 04.89s: got discinfo
0m 05.75s: got bdmv
0m 05.75s: got agid 1
0m 05.81s: sent host cert chal
0m 05.81s: got drive cert chal
0m 05.83s: BEC 0
0m 05.83s: DRIVE_VENDOR 0x0386
0m 05.91s: got drive key
0m 06.52s: got host key signature
0m 06.52s: verified drive signature
0m 06.52s: verified host signature
0m 06.59s: sent host signature and key point
0m 06.59s: got bus key
0m 08.87s: got volume id
0m 08.87s: got volume id mac
0m 08.87s: volume id is correct
0m 08.92s: got vid
0m 08.92s: blu-ray DA39A3EE5E6B4B0D3255BFEF95601890AFD80709


DVDFab 8.0.7.6 (2011/02/25 14:45:02)

0m 01.29s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1
0m 05.11s: detected blu-ray
0m 05.11s: drive D
0m 05.13s: blu-ray type 1
0m 05.13s: volume label IP_MAN
0m 05.85s: root 0306FC4D IP_MAN:IP_MAN:IP_MAN:IP_MAN
0m 06.19s: aacs 1 bd+ 0
0m 06.53s: got discinfo
0m 07.42s: got bdmv
0m 07.44s: got agid 1
0m 07.50s: sent host cert chal
0m 07.50s: got drive cert chal
0m 07.50s: BEC 0
0m 07.50s: DRIVE_VENDOR 0x0386
0m 07.58s: got drive key
0m 08.19s: got host key signature
0m 08.19s: verified drive signature
0m 08.20s: verified host signature
0m 08.28s: sent host signature and key point
0m 08.28s: got bus key
0m 10.49s: got volume id
0m 10.51s: got volume id mac
0m 10.51s: volume id is correct
0m 10.51s: got vid
0m 10.59s: blu-ray E971A3A0E0A243C9BFA1DADABC19F1F1351F1F93
0m 11.37s: D 8516C9A6
0m 11.37s: got vuk
0m 12.02s: got unit key 1
0m 19.28s: got extended bdinfo
0m 19.28s: opened blu-ray


DVDFab 8.0.7.6 (2011/02/25 14:49:11)

0m 01.29s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1
0m 04.96s: detected blu-ray
0m 04.96s: drive D
0m 04.96s: blu-ray type 1
0m 04.96s: volume label IP_MAN
0m 05.67s: root 0306FC4D IP_MAN:IP_MAN:IP_MAN:IP_MAN
0m 06.03s: aacs 1 bd+ 0
0m 06.38s: got discinfo
0m 07.27s: got bdmv
0m 07.27s: got agid 1
0m 07.33s: sent host cert chal
0m 07.33s: got drive cert chal
0m 07.33s: BEC 0
0m 07.33s: DRIVE_VENDOR 0x0386
0m 07.41s: got drive key
0m 08.01s: got host key signature
0m 08.01s: verified drive signature
0m 08.01s: verified host signature
0m 08.09s: sent host signature and key point
0m 08.09s: got bus key
0m 10.34s: got volume id
0m 10.34s: got volume id mac
0m 10.34s: volume id is correct
0m 10.34s: got vid
0m 10.42s: blu-ray E971A3A0E0A243C9BFA1DADABC19F1F1351F1F93
0m 11.43s: D 8516C9A6
0m 11.43s: got vuk
0m 11.81s: got unit key 1
0m 19.26s: got extended bdinfo
0m 19.26s: opened blu-ray
7m 28.87s:


------ begin mobile work(1/1) ------


7m 28.87s: create config(5)
7m 28.87s: convert profile(m2ts.ac3.fast)
7m 28.87s: blu-ray playlist(0) angle(0) chapter(5->5)
7m 28.87s: stream(4113,AVC,1) stream(4354,DTS-HD MA,1) stream(4609,PGS,4)
7m 28.90s: info: set output video frame_rate(24/1)
7m 28.90s: subpicture preset(1), mode(0)
7m 28.94s: processing source(00000.m2ts)
7m 28.94s: try to use gpu acceleration(2) for video decoding
7m 28.94s: DXVA GPU acceleration for video decoding enabled
7m 30.03s: h264_encode: encode param profile(2) level(41) bitrate(5667)
7m 32.06s: subpicture(4609) mode(0)
7m 32.06s: connect to sub render filter
11m 26.21s:


------ finish mobile work ------




DVDFab 8.0.7.6 (2011/02/25 15:16:01)

0m 01.31s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1
0m 03.35s: detected blu-ray
0m 03.36s: drive D
0m 03.36s: blu-ray type 1
0m 03.36s: volume label IP_MAN
0m 04.07s: root 0306FC4D IP_MAN:IP_MAN:IP_MAN:IP_MAN
0m 04.41s: aacs 1 bd+ 0
0m 04.75s: got discinfo
0m 05.63s: got bdmv
0m 05.64s: got agid 1
0m 05.70s: sent host cert chal
0m 05.70s: got drive cert chal
0m 05.70s: BEC 0
0m 05.70s: DRIVE_VENDOR 0x0386
0m 05.78s: got drive key
0m 06.39s: got host key signature
0m 06.39s: verified drive signature
0m 06.39s: verified host signature
0m 06.47s: sent host signature and key point
0m 06.47s: got bus key
0m 08.72s: got volume id
0m 08.72s: got volume id mac
0m 08.72s: volume id is correct
0m 08.73s: got vid
0m 08.81s: blu-ray E971A3A0E0A243C9BFA1DADABC19F1F1351F1F93
0m 09.82s: D 8516C9A6
0m 09.82s: got vuk
0m 10.18s: got unit key 1
0m 17.61s: got extended bdinfo
0m 17.61s: opened blu-ray
3m 10.21s:


------ begin mobile work(1/1) ------


3m 10.21s: create config(5)
3m 10.21s: convert profile(m2ts.ac3.fast)
3m 10.21s: blu-ray playlist(0) angle(0) chapter(5->5)
3m 10.22s: stream(4113,AVC,1) stream(4354,DTS-HD MA,1) stream(4609,PGS,4)
3m 17.18s: info: set output video frame_rate(24/1)
3m 17.18s: subpicture preset(1), mode(0)
3m 17.23s: processing source(00000.m2ts)
3m 17.23s: try to use gpu acceleration(2) for video decoding
3m 17.23s: DXVA GPU acceleration for video decoding enabled
3m 18.27s: h264_encode: encode param profile(2) level(41) bitrate(5667)
3m 20.30s: subpicture(4609) mode(0)
3m 20.30s: connect to sub render filter
7m 13.33s:


------ finish mobile work ------

[CBR929]

Hi mjrtoo
Please Open Fab click the Click the Green √ at top right corner of the DVDFab screen, and open Common Settings > General >A/V Codec, set Video Decoder to Software and set Video Encoder to Software restart Fab and try again.
CBR929

[mjrtoo]

Hi mjrtoo
Please Open Fab click the Click the Green √ at top right corner of the DVDFab screen, and open Common Settings > General >A/V Codec, set Video Decoder to Software and set Video Encoder to Software restart Fab and try again.
CBR929

Just tried that, and same result.

[mjrtoo]

Another thing I notice is that when I tried to use the profile m2ts.audiocopy.fast that the resulting file was named filename.h264.mp3.m2ts. When I tried to play that back with my WD Live HD player the audio track reported as DTSMA but there is no audio heard. I thought that maybe the WD player just didn't like DTSMA, but I did a full m2ts.passthrough and everything with that file, while massive, works fine. I'm able to hear all audio streams in DTSMA, and also change to any subtitle language available.

[ting]

hi,

Thanks report the two problem:

1. mkv.h264.ac3 and mt2s.ac3.xxx audio not in correct channels

2. m2ts.audiocopy.fast that the resulting file was named filename.h264.mp3.m2ts.

and DTSMA not be known by WD Live.

We will check this problem.