Announcement

**bean55** · 09-13-2011, 12:01 PM

FARSCAPE_S2_V1D2

TV Series Vol 1 Disc 2 ?

With several of my older TV series stuff I had to revert back to DVDFab version 5.3.2.0 to get them done.

**CBR929** · 09-13-2011, 08:12 PM

Hi kisertn
Please try the latest version found here http://forum.dvdfab.com/showthread.php?t=14547
Also please do not convert from your drive.
First save it to your HDD without compression.
Then open the hard drive file and use that for your converting.
Doing it this way saves wear and tear on your optical drive and is also faster.
Hope this helps
CBR929

**kisertn** · 09-14-2011, 09:40 AM

Originally posted by CBR929 View Post

please do not convert from your drive.
First save it to your HDD without compression.
Then open the hard drive file and use that for your converting.
Doing it this way saves wear and tear on your optical drive and is also faster.
Hope this helps
CBR929

Hi,

Is this done using DVDCopy and then Video Converter? I have both licensed, butwanted to be sure I understood correctly. Also, I am in the process of running DVDCopy now but I saw no option to execute without compression, unless that simply happens as I copy it to HDD.

I tried installing 8.1.1.9 but it would not launch soI had to revert to 8.1.1.2.

-Neil

**terry5** · 09-14-2011, 10:08 AM

Hi kisertn,
Could you give us more inform about "I tried installing 8.1.1.9 but it would not launch soI had to revert to 8.1.1.2."? What about 8119?
What's more, you'd better to clone the disc to HD as iso format and then use DVD ripper.
Thanks
terry5

**CBR929** · 09-14-2011, 10:11 AM

Originally posted by kisertn View Post

Hi,

Is this done using DVDCopy and then Video Converter? I have both licensed, butwanted to be sure I understood correctly. Also, I am in the process of running DVDCopy now but I saw no option to execute without compression, unless that simply happens as I copy it to HDD.

I tried installing 8.1.1.9 but it would not launch soI had to revert to 8.1.1.2.

-Neil

Hi kisertn
This is done using DVD Copy and then using DVD Ripper.
The option for compression will be on Fab's main screen toward the bottom, you will choose either DVD5 or DVD9.
CBR929

**kisertn** · 09-14-2011, 11:50 PM

Originally posted by CBR929 View Post

Hi kisertn
This is done using DVD Copy and then using DVD Ripper.
The option for compression will be on Fab's main screen toward the bottom, you will choose either DVD5 or DVD9.
CBR929

Ok, this I did and I am getting the same problem.

I first used DVD Copy to copy the two sections I wanted to a folder on the HDD.
Then, I used DVD Ripper to attempt to convert one of them using the PS3 profile.
I am attaching the dvdfab_internal.log to this post.

It runs for awhile and then simply stops, just as when I run DVD Ripper directly on the disc.

Attached Files

dvdfab_internal.log (2.0 KB, 4 views)

**kisertn** · 09-14-2011, 11:52 PM

Originally posted by terry5 View Post

Hi kisertn,
Could you give us more inform about "I tried installing 8.1.1.9 but it would not launch soI had to revert to 8.1.1.2."? What about 8119?
What's more, you'd better to clone the disc to HD as iso format and then use DVD ripper.
Thanks
terry5

I am going to try and install 8.1.1.9 again tonight (in the next hour).

When I installed it this morning, it simply would not launch.
I reinstalled 8.1.1.2 and it also would not launch.
So I then uninstalled 8.1.1.2, and then reinstalled it, and then it launched.

Tonight I will uninstall 8.1.1.2 and then install 8.1.1.9 and hopefully it will launch. I'll post back later when I do.

**CBR929** · 09-15-2011, 12:00 AM

Hi kisertn
Could you try to install the newest version again and post any information that you can that terry5 asked for .
Also your logs say that you are using Cuda please turn it off and use the software settings.

Open Fab click the Click the Green √ at top right corner of the DVDFab screen, and open Common Settings > General >A/V Codec, put a check in Disable all GPU codes and make sure they are set to Software, restart Fab and try again.
CBR929

**kisertn** · 09-15-2011, 12:17 AM

Originally posted by CBR929 View Post

Hi kisertn
Could you try to install the newest version again and post any information that you can that terry5 asked for .
Also your logs say that you are using Cuda please turn it off and use the software settings.

Open Fab click the Click the Green √ at top right corner of the DVDFab screen, and open Common Settings > General >A/V Codec, put a check in Disable all GPU codes and make sure they are set to Software, restart Fab and try again.
CBR929

I did uninstall 8.1.1.2 and then installed 8.1.1.9 and it worked fine. (meaning 8.1.1.9 is now launching and executing fine)
I will make the changes and use Software only. However, it should be noted that Iwas originally using Software only when i encountered the problem. I switched to CUDA in an attempt to try somethign different. But, will switch back to Software only and re-run.

**90312** · 09-15-2011, 03:59 AM

Check this link kisertn, if the audio is defaulting to 5.1 Multichannel @ 448kpbs it will slow down and stop encoding but the timer will run forever. It just won't work like that.

http://forum.dvdfab.com/showpost.php?p=94415&postcount=19

**kisertn** · 09-18-2011, 12:33 PM

Originally posted by 90312 View Post

Check this link kisertn, if the audio is defaulting to 5.1 Multichannel @ 448kpbs it will slow down and stop encoding but the timer will run forever. It just won't work like that.

http://forum.dvdfab.com/showpost.php...5&postcount=19

Thank you, I will check this. I just had a failure and yes, it was defaulted to 5.1 Multichannel. So, I will now try with Dolby ProLogic II at 160kpbs.

**kisertn** · 09-18-2011, 12:40 PM

My apologies for not posting back sooner. Between work, and the oddities of what I am experiencing, I have been delayed.

When I installed 8.1.1.9 it did work. However, I am trying to determine the best conversion settings for these movies so that I end up with the best possible looking and sounding files that will play on my laptop as well as my Playstation.

When I used the default Playstation profile, it works. But the picture leaves something to be desired (imho).

I then changed settings (I did not track exactly what I did) to be two-pass, and to increase framerate and bitrate. I have little idea as to what I am doing, but I recognize jerky video, or video with jagged lines as bad and am playing with settings to improve.

I am doubtful two-pass does much.
Framerate I am unclear about, and I can't seem to tell what the source material was (which I believe is what I would set it to).
Bitrate I understand is significant but I have no idea where is optimal versus wasteful.
When I choose deinterlace I seem to get fewer jagged lines.

But, in the end, when I change some of these settings, it would do the same thing and simply stall at some point.

At this time, I need to sit down and document what settings I am using, and the results I get from each (meaning does it stall out or not). When I can complete that, I will post back. But, big change was that when I went to 8.1.1.9 and used the same profile, it began to work for me.

-Neil

**CBR929** · 09-20-2011, 12:02 AM

Hi kisertn
Please try the latest version found here http://forum.dvdfab.com/showthread.php?t=14648 there have been many changes.
Hope this helps
CBR929

Announcement

Problem Ripping DVDs - simply stalls

DVD Ripper Problem Ripping DVDs - simply stalls

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment