Just tried to convert 300.vob to MP4 (default profile for PS3) again using Video Converter. It got a little further, 1.86% but stalled out again. Some observations, when it first started the conversion process the Encoding FPS was around 25.00 but then immediately started to decrease. When I saw that no more progress was being made and cancelled it was at 8.53. Additionally, i was monitoring my Task Manager and DVDFab.exe and FabCore.exe were taking up a combined 100% of my processor. But when I checked before clicking cancel FabCore.exe was down to 00% while DVDFab was about 51%. The FabCore process seems to have stopped on it's own. Anyway the log is below. I'll try the Dark Knight rip again later.
DVDFab 8.1.3.2 (2011/11/02 16:42:02)
0m 01.99s: Qt Translator file load success
DVDFab 8.1.3.2 (2011/11/02 16:46:25)
0m 01.31s: Qt Translator file load success
0m 01.84s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 0 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1
2m 22.13s: 513.05 : not any valid video codec information
2m 49.62s:
------ begin mobile work(1/1) ------
2m 49.63s: info: create config(3)
2m 49.65s: info: convert profile(PlayStation 3)
2m 49.65s: info: file (.vob),3D(0)
2m 49.65s: info: streams((0.2)(1.2))
2m 49.68s: 513.05 : not any valid video codec information
2m 49.69s: info: not set correct fourcc for video(28)
2m 49.71s: info: set output video frame_rate(24000/1001)
2m 50.77s: info: h264_encode: encode param profile(2) level(41) bitrate(7472)
6m 06.07s: ------ cancel all mobile work -------
-
Some things I've noticed and questions. These problems started when I started using the 1920x1082 Frame Resolution. Previously I was using 1280x772.
So why is it that ripping 300 from the disc worked but not from the VOB? I just paid for lifetime Video Converter because I wanted to convert my VOB's to HD without having to pull out all the DVDs again. I hope that wasn't a waste of money.
Could this be something with my system? Specificially my GPU? I'm running Windows 7 Home Premium 64, AMD Athlon II X2 215 Processor 2.70 GHz, 3GB RAM. And the DVDFab output for Codec Information is:
Graphics Chipset :
NVIDIA GeForce 9200
CUDA Driver Version: 4.0
CUDA Capability revision number: 1.1
Supported Video Codecs :
CUDA_MODE_H264
CUDA_MODE_VC1
CUDA_MODE_MPEG2
DXVA_MODE_H264
DXVA_MODE_VC1
DXVA_MODE_MPEG2
CoreAVC : cannot be detected.Last edited by Bizert; 11-02-2011, 02:14 AM.Leave a comment:
-
Your DVDFab installation is out of date, there have been many fixes and improvements. Please update to V8.1.3.2 and try again. Please post new logs if it still does not work.Leave a comment:
-
Ok sadly I have a couple of twists to this problem.
First with "Disable all GPU codecs for decoding and encoding" checked I a similar problem ripping The Dark Knight. It stalled just shy of 95% after 8+ hours (usually takes 6-7 hours on my PC to rip and convert). Here's the log:
Code:DVDFab 8.1.2.0 (2011/10/29 11:16:20) 0m 01.65s: Qt Translator file load success 0m 01.65s: import key file G:\ 1 0m 02.40s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 0 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1 0m 07.39s: detected blu-ray 0m 07.39s: drive G 0m 07.39s: blu-ray type 1 0m 07.39s: volume label THE DARK KNIGHT 0m 07.53s: aacs 1 bd+ 0 0m 22.83s: got discinfo 0m 23.18s: got bdmv 0m 23.19s: Vendor: PLEXTOR 0m 23.19s: Product: BDDVDR PX-B310U 0m 23.19s: Revision: 1.07 0m 23.19s: Vendor specific: 2009/11/16 14:27 0m 23.21s: AACS version: 1 0m 23.21s: Number of concurrent AGIDs: 2 0m 23.21s: Supports bus encryption: NO 0m 23.21s: Supports binding nonce generation: NO 0m 23.21s: Supports Hybrid discs: NO 0m 23.21s: got agid 0 0m 23.27s: sent host cert chal 0m 23.29s: got drive cert chal 0m 23.29s: BEC 0 0m 23.29s: DRIVE_VENDOR 0x0128 0m 23.36s: got drive key 0m 24.00s: got host key signature 0m 24.00s: verified drive signature 0m 24.00s: verified host signature 0m 24.08s: sent host signature and key point 0m 24.08s: got bus key 0m 24.11s: got agid 0 0m 24.18s: sent host cert chal 0m 24.18s: got drive cert chal 0m 24.18s: BEC 0 0m 24.18s: DRIVE_VENDOR 0x0128 0m 24.25s: got drive key 0m 24.25s: got host key signature 0m 24.27s: verified drive signature 0m 24.27s: verified host signature 0m 24.35s: sent host signature and key point 0m 24.35s: got bus key 0m 25.72s: got volume id 0m 25.72s: got volume id mac 0m 25.72s: volume id is correct 0m 25.74s: got vid 0m 25.94s: blu-ray 1DEEE3DC721AF46F1E955709865EC616A7E95A5F 0m 26.72s: cert BEE=0x00 same 0m 30.28s: D 4D172E4A 0m 30.32s: got vuk 0m 30.71s: got unit key 1 0m 36.28s: got extended bdinfo 0m 36.30s: opened blu-ray 3m 09.18s: Blu-ray Copy: Main Movie 3m 09.18s: Source: G:\BDMV\ 3m 09.19s: Playlist: 100 3m 09.19s: Chapters: 1 -> 40 3m 09.19s: TotalSize: 33445 MB 3m 09.21s: SourceSize: 33445 MB 3m 09.21s: RemoveHDAudio: 0 3m 09.21s: CompressToAC3: 0 3m 09.23s: OutputDisc: BDMV 3m 09.23s: OutputTarget: BD50 3m 09.23s: OutputVideo: 1080p/i 54m 01.65s: detected blu-ray 54m 01.81s: drive G 54m 01.82s: blu-ray type 1 54m 01.82s: volume label FROSTBITE_AC 55m 04.96s: aacs 1 bd+ 0 55m 08.89s: got discinfo 55m 09.03s: got bdmv 55m 09.04s: Vendor: PLEXTOR 55m 09.06s: Product: BDDVDR PX-B310U 55m 09.06s: Revision: 1.07 55m 09.07s: Vendor specific: 2009/11/16 14:27 55m 09.07s: AACS version: 1 55m 09.07s: Number of concurrent AGIDs: 2 55m 09.09s: Supports bus encryption: NO 55m 09.09s: Supports binding nonce generation: NO 55m 09.10s: Supports Hybrid discs: NO 55m 09.10s: got agid 0 55m 09.17s: sent host cert chal 55m 09.18s: got drive cert chal 55m 09.18s: BEC 0 55m 09.20s: DRIVE_VENDOR 0x0128 55m 09.28s: got drive key 55m 09.29s: got host key signature 55m 09.29s: verified drive signature 55m 09.31s: verified host signature 55m 09.39s: sent host signature and key point 55m 09.39s: got bus key 55m 09.40s: got agid 0 55m 09.48s: sent host cert chal 55m 09.48s: got drive cert chal 55m 09.49s: BEC 0 55m 09.49s: DRIVE_VENDOR 0x0128 55m 09.57s: got drive key 55m 09.59s: got host key signature 55m 09.59s: verified drive signature 55m 09.60s: verified host signature 55m 09.68s: sent host signature and key point 55m 09.68s: got bus key 55m 11.04s: got volume id 55m 11.05s: got volume id mac 55m 11.05s: volume id is correct 55m 11.05s: got vid 55m 11.24s: blu-ray 4FC2C5365D31C306BEAD96C16D70C2CEE8B0606F 55m 11.90s: cert BEE=0x00 same 55m 13.41s: D BAEEBED8 55m 13.44s: got vuk 55m 13.82s: got unit key 7 55m 28.79s: got extended bdinfo 55m 28.79s: opened blu-ray 56m 15.51s: Blu-ray Copy: Main Movie 56m 15.51s: Source: G:\BDMV\ 56m 15.53s: Playlist: 800 56m 15.53s: Chapters: 1 -> 18 56m 15.55s: TotalSize: 34590 MB 56m 15.55s: SourceSize: 34590 MB 56m 15.55s: RemoveHDAudio: 0 56m 15.56s: CompressToAC3: 0 56m 15.56s: OutputDisc: BDMV 56m 15.56s: OutputTarget: BD50 56m 15.58s: OutputVideo: 1080p/i Second, when trying to convert 300 from the single VOB file I had previously ripped (using Video Converter), to MP4 H.264 I never got past 1%. But I had no problems ripping and converting from the disc to MP4 H.264. Any ideas what's up with that? Here's that log: DVDFab 8.1.2.0 (2011/11/01 08:33:13) 0m 01.79s: Qt Translator file load success 0m 02.68s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 0 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1 0m 28.47s: got bdmv 0m 28.64s: got extended bdinfo 1m 07.47s: ------ begin mobile work(1/1) ------ 1m 07.48s: info: create config(5) 1m 07.48s: info: convert profile(ps3.mp4.hd) 1m 07.50s: info: bluray playlist(0),angle(0),chapter(1->40),3D(0) 1m 07.50s: info: streams((4113.2)(4352.2)(4608.8)) 1m 07.51s: info: not set correct fourcc for video(28) 1m 07.53s: info: set output video frame_rate(24000/1001) 1m 07.59s: info: subpicture preset(1), mode(0) 1m 07.64s: info: enable multi-thread software decoder 1m 08.76s: info: h264_encode: encode param profile(2) level(41) bitrate(7458) 1m 11.07s: info: subpicture(4608) mode(0) 1m 11.08s: info: connect to sub render filter 1m 13.13s: info: processing source(00007.m2ts) 533m 06.27s: ------ cancel all mobile work ------- DVDFab 8.1.2.0 (2011/11/01 20:39:09) 0m 02.58s: Qt Translator file load success 0m 03.46s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 0 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1 DVDFab 8.1.2.0 (2011/11/01 20:53:58) 0m 01.65s: Qt Translator file load success 0m 01.85s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 0 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1 15m 59.67s: 513.05 : not any valid video codec information 16m 31.82s: ------ begin mobile work(1/1) ------ 16m 31.83s: info: create config(3) 16m 31.85s: info: convert profile(PlayStation 3) 16m 31.85s: info: file (.vob),3D(0) 16m 31.87s: info: streams((0.2)(1.2)) 16m 31.88s: 513.05 : not any valid video codec information 16m 31.93s: info: not set correct fourcc for video(28) 16m 31.94s: info: set output video frame_rate(24000/1001) 16m 33.04s: info: h264_encode: encode param profile(2) level(41) bitrate(7472) 18m 07.96s: ------ cancel all mobile work -------
Leave a comment:
-
Hi Bizert,
DVDFab will load the GPU acceleration while installing automatically. In some conversion, the GPU acceleration isn't stable. So if you get failure while converting, plese select "Disable all GPU codecs for decoding and encoding" in Common Settigns -> General -> A/V Codec page.
Wish it helps.
terry5Leave a comment:
-
THANKS!!! It looks like that fixed it. True Romance started to rip like normal and now trying the new Blurays.
So I'm curious how that happened. Because i don't recall ever change those settings?Leave a comment:
-
Hi Bizert
Open Fab click the Click the Green √ at top right corner of the DVDFab screen, and open Common Settings > General >A/V Codec, put a check in Disable all GPU codes and make sure they are set to Software, restart Fab and try again.
CBR929Leave a comment:
-
Here's a log from the latest failures today:
DVDFab 8.1.2.0 (2011/09/17 10:55:38)
0m 02.96s: Qt Translator file load success
0m 03.80s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 0 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1
0m 17.00s: detected blu-ray
0m 17.01s: drive G
0m 17.01s: blu-ray type 1
0m 17.03s: volume label TRUE_ROMANCE_BD01
0m 17.14s: aacs 1 bd+ 0
0m 17.94s: got discinfo
0m 18.20s: got bdmv
0m 18.23s: Vendor: PLEXTOR
0m 18.25s: Product: BDDVDR PX-B310U
0m 18.26s: Revision: 1.07
0m 18.28s: Vendor specific: 2009/11/16 14:27
0m 18.28s: AACS version: 1
0m 18.29s: Number of concurrent AGIDs: 2
0m 18.31s: Supports bus encryption: NO
0m 18.34s: Supports binding nonce generation: NO
0m 18.36s: Supports Hybrid discs: NO
0m 18.39s: got agid 0
0m 18.47s: sent host cert chal
0m 18.48s: got drive cert chal
0m 18.50s: BEC 0
0m 18.50s: DRIVE_VENDOR 0x0128
0m 18.57s: got drive key
0m 19.39s: got host key signature
0m 19.39s: verified drive signature
0m 19.39s: verified host signature
0m 19.46s: sent host signature and key point
0m 19.48s: got bus key
0m 19.48s: got agid 0
0m 19.54s: sent host cert chal
0m 19.56s: got drive cert chal
0m 19.57s: BEC 0
0m 19.57s: DRIVE_VENDOR 0x0128
0m 19.65s: got drive key
0m 19.65s: got host key signature
0m 19.67s: verified drive signature
0m 19.68s: verified host signature
0m 19.76s: sent host signature and key point
0m 19.76s: got bus key
0m 21.15s: got volume id
0m 21.15s: got volume id mac
0m 21.16s: volume id is correct
0m 21.18s: got vid
0m 21.38s: blu-ray 53E66AB2D7FBC69A31ED33F965E4EEC2BF99CF61
0m 22.13s: cert BEE=0x00 same
0m 22.16s: got vuk
0m 22.60s: got unit key 1
0m 45.14s: got extended bdinfo
0m 45.16s: opened blu-ray
1m 33.30s:
------ begin mobile work(1/1) ------
1m 33.31s: info: create config(5)
1m 33.31s: info: convert profile(ps3.mp4.hd)
1m 33.31s: info: bluray playlist(2),angle(0),chapter(1->35),3D(0)
1m 33.33s: info: streams((4113.2)(4353.2)(4608.8))
1m 33.33s: info: not set correct fourcc for video(28)
1m 33.35s: info: set output video frame_rate(24000/1001)
1m 33.38s: info: subpicture preset(1), mode(0)
1m 33.39s: info: enable multi-thread software decoder
1m 33.42s: CUDA GPU acceleration for video encoding enabled
1m 33.44s: info: h264_encode: encode param profile(2) level(41) bitrate(5524)
1m 33.53s: info: subpicture(4608) mode(0)
1m 33.55s: info: connect to sub render filter
1m 33.61s: info: processing source(00002.m2ts)
2m 19.55s: ------ cancel all mobile work -------
2m 44.58s:
------ begin mobile work(1/1) ------
2m 44.59s: info: create config(5)
2m 44.59s: info: convert profile(ps3.mp4.hd)
2m 44.61s: info: bluray playlist(2),angle(0),chapter(1->35),3D(0)
2m 44.61s: info: streams((4113.2)(4352.2))
2m 44.62s: info: not set correct fourcc for video(28)
2m 44.62s: info: set output video frame_rate(24000/1001)
2m 44.64s: info: enable multi-thread software decoder
2m 44.65s: CUDA GPU acceleration for video encoding enabled
2m 44.67s: info: h264_encode: encode param profile(2) level(41) bitrate(5524)
2m 44.72s: info: processing source(00002.m2ts)
4m 52.09s: ------ cancel all mobile work -------Leave a comment:
-
No, you can license BD Ripper or DVD Ripper standalone from the Copy modules, it should not be a problem. Not sure about why the DVD Copy still works unless it is in HD Decrypter (free) mode, which allows some functions but no compression and no burning.
Post the DVDFab internal log files from the failed conversions. DVDFab must be installed AND run from a user account with administrator permissions.
Originally posted by Bizert View PostLeave a comment:
-
Negative, problem still exists with 8.1.2.0.
If it helps here's the status of my licenses:
File Transfer, HD Decrypter, DVD Ripper & Blu-ray Ripper - Never Expire
DVD Copy & Blu-ray Copy - Expired (I only purchased these for 1 year around June 2010)
The rest - Never been used
Does the Blu-ray Copy license have to still be valid to rip Blu-ray discs? Because when it didn't sound that way when i read up on them both on your website before my purchases last year. So that is why i got the Blu-ripper for life time and copy only for a year. And if so why do DVDs still work? I did the same there, bought copy for a year and ripper for lifetime.
BertLeave a comment:
-
Hi Bizert,
Why not give a try for the lastest build 8120 QT?
.
Wish it helps.
terry5Leave a comment:
-
...one more thing to add. I just tried creating an ISO of True Romance from the BD and that worked fine. But when I tried to convert ISO it stalled again at 0.05%.
Also I forgot to say, I'm ripping these files in MP4 format to be played on a PS3. With no changes to the default PS3 profile settings.Leave a comment:
-
Bluray ripper stalls at 0.05%
This is something new and not problem with a specific disc. Running Windows 7 with DVD Fab 8.1.1.2 Qt. I tried to rip my copy of X Men: First Class and Secretariat and both stalled after reporting 0.05%, and the BR drive doesn't even sound like it's spinning. I then tried to re-rip the last BR i did back in Janaury (True Romance) and it behaived the same way. So I thought I was a problem with my cheapo Plextor drive that's over a year old. I just got my new LG drive and connected it today but I'm having the same problem. I tried removing and re-installing DVDfab, but that didn't fix it either. I was able to rip a DVD 2 weeks ago with no issues. It appears to be BR thing.
Has anyone had this same issue and can please help? It would be greatly appreciated.
Leave a comment: