Anchorman Audio Sync Issue

This_side_up

I have attempted to rip the Blu-Ray title "Anchorman: The Legend of Ron Burgundy" multiple times but each time the audio is approximately 1 second ahead of the video.

I have tried with several revisions including the most recent v9.1.3.3 but the issue continues to happen. Can you please attempt to correct this in the next release?

Or does anyone know of a app to bump the audio back 1 second without re-encoding the video?

Wilson.Wang

Hi,

Please post the log file.
Try to convert to mkv.audiocopy or passthrough profiles?

Wilson

parit

i can't seem to get the sound synced either using your suggestion, but i also can't get the forced subs to stick in this movie when i rip to MKV... they are near the end, around 1:24:15, when the dog speaks to the bear... can you help with that?

Dora

@parit
Did you also occur on this movies?
Can you send the log with A/v out synced?
About force subtitle i think you make sure you choosed the right sub includ force subtitle. You can ripped the chapter that includ force subtitles selected. The force sub often exites in different way.

eisenb11

I'd like to add that I was able to fix the sync issue by remuxing the MKV file with a 600 ms audio delay.

signals

There are several versions of this disc (theatrical, unrated, "supersized"), which one do you have?

parit

[QUOTE=Dora;161683]@parit
Did you also occur on this movies?
Can you send the log with A/v out synced?
About force subtitle i think you make sure you choosed the right sub includ force subtitle. You can ripped the chapter that includ force subtitles selected. The force sub often exites in different way.[/QUOTE]

yes, this is a common problem with most movies... "direct render to video" was finally the fix for Elysuim, so i tried it with this one as well (note with Copy video check this option goes away)... i believe the 3rd English track has the forced subs, but choosing it and choosing "forced subtitles only" doesn't seem to work.

here is my last log:

DVDFab 9.1.4.0 (2014/04/22 16:27:07)

0m 00.05s: Init Public log : enabled.
0m 00.05s: Init Private log : finish.
0m 00.05s: App info: 2014-4-17
0m 00.06s: App info: 9.1.4.0 9140 Official
0m 00.07s: Init CrashReportSettings : disabled.
0m 00.07s: Init DVDInfo_Log : enabled.
0m 00.08s: Init Qt_Log : disabled.
0m 00.40s: Profile Manager :: Begin Load Profile
0m 00.41s: Qt Translator file load success
0m 00.41s: App info: client type 2.
0m 00.42s: Fabplay load: preload successful.
0m 00.49s: Fabplay load: Load successful.
0m 00.50s: Init process: Transfer settings successful.
0m 00.50s: info: fabcheck logpath= C:/Users/parit.chauhan/Documents/DVDFab9/Log/
0m 00.50s: fab_check_gpu is running ...
0m 00.67s: fab_check_gpu run successful
0m 00.67s: info: recommand= 851968, Shrink support= 1, enable= 1, cuda_cap= 0 , cpu_count= 4
0m 00.67s: GPU check: GPUAccelerate-851973
0m 00.67s: GPU check: GPUAccelerate setting-851968, 851968
0m 00.67s: GPU check: CUDA cap-0
0m 00.68s: GPU check: Support coreavc decode-0
0m 00.68s: GPU check: Lighting shrink status-1, 1
0m 00.68s: GPU check: Graphics info 1: Intel(R) HD Graphics 3000 : :
0m 00.68s: Init process: Load config successful.
0m 00.68s: Init process: Windows os type is 13.
0m 00.68s: Init process: command line in is
0m 01.05s: Reg check: Parse string: ( 2:8260762964 )( 11:8260762964 )( 20:8260762964 )( 50:8260762964 )( 80:8260762964 )( 21:8260762964 )( 22:8260762964 )( 60:8260762964 )( 70:8260762964 )( 61:8260762964 )( 62:8260762964 )( 1:0 )( OV:9140 )( BV:9139 )( S:e5f3c06d9bc6093ff1eb95fca87c9a8a )
0m 01.05s: Reg check: Option check status-Local
0m 01.05s: Reg check: ( HD Decrypter:1:0 )-( DVD to DVD (Gold):0:0 )-( DVD to DVD:1:1 )-( DVD to Mobile:1:1 )-( Blu-ray to Blu-ray:1:1 )-( Blu-ray to Mobile:1:1 )-( File to Mobile:1:1 )-( Blu-ray to DVD:1:1 )-( File to DVD:1:1 )-( File to Blu-ray:1:1 )-( File Mover:1:1 )-( Blu-ray to 3D:1:1 )-( 2D to 3D:1:1 )-( Blu-ray Decrypt:1:0 )-( DVD Decrypt:1:0 )-
0m 01.05s: App info: language type ENU.
0m 01.06s: Reg check: Start get sys number.
0m 01.06s: Reg check: Serial number is: 24-b6-fd-fd-33-a3
0m 01.06s: Reg check: Connect type is: 0
0m 01.07s: Init process: Init GPU settings successful.
0m 01.25s: Init preview: Begin init preview play engine.
0m 01.25s: Init preview: Begin init preview play engine(XBMC).
0m 01.87s: Init preview: Init internal engine successful.
0m 02.35s: Reg check: Times of connecting error is: 0
0m 02.35s: Reg check: Parse string: ( S:3d5f179caecc42afcf17806e02a100f0
0m 02.36s: Reg check: Option check status-NewWork
0m 03.02s: Burn engine: start init.
0m 03.34s: Burn engine: engine type-0.
0m 03.34s: Burn engine: writer count 2.
0m 03.34s: Burn engine: 0- D:\ [HL-DT-ST DVD+-RW GP60N A200 (Usb)].
0m 03.34s: Burn engine: 1- G:\ [ASUS BW-12D1S-U 1.20 (Usb)].
0m 03.34s: Burn engine: end init.
0m 04.04s: Profile Manager :: End Load Profile
0m 04.44s: Init process: Init setting page successful.
0m 04.44s: QtLog Mode = false
0m 04.44s: Show UI Step 2
0m 04.85s: Show UI Step 3
0m 04.86s: Start show MainUI.
0m 04.86s: UI manager: switch to Converter mode.
0m 05.89s: allow_test : false
0m 05.89s: fab_app_path : C:/Program Files (x86)/DVDFab 9/
0m 05.89s: fab_app_name : DVDFab.exe
0m 05.90s: fab_client_type : 2
0m 05.90s: product_name : DVDFab
0m 05.90s: test_url : http://www.dvdfab.cn
0m 05.90s: down_url : http://www.dvdfab.cn/download.htm?ver=9
0m 05.90s: current_version_type : Official
0m 05.90s: update_temp_path : C:/Users/parit.chauhan/Documents/DVDFab9/Temp/updateTemp/
0m 05.90s: current_version : 9140
0m 05.90s: language_name : ENU
0m 05.90s: qm_file : C:/Program Files (x86)/DVDFab 9/QLanguage/FabQt_ENU.qm
0m 05.90s: allow_beta : false
0m 06.01s: Init process: init main ui successful.
0m 06.09s: Init process: show main ui successful.
0m 06.09s: DriveX msg: Init driveX D with I/O mode: 0
0m 06.09s: DriveX msg: Init driveX G with I/O mode: 0
0m 06.70s: opening drive G
0m 06.70s: opened i/o
0m 06.71s: got media type 15
0m 08.78s: got max lba 19724223
0m 10.22s: got disc type 20
0m 10.22s: type Blu-ray BDMV
0m 10.22s: volume label ANCHORMAN_D1
0m 10.25s: DriveX msg: add media in driveX G.
0m 10.26s: DriveX msg: send open media msg to thread for driveX G.
0m 13.47s: opening drive D
0m 13.49s: opened i/o
0m 13.50s: opening drive G
0m 13.50s: opened i/o
0m 13.51s: got media type 15
0m 13.97s: got max lba 19724223
0m 15.32s: got disc type 20
0m 15.32s: type Blu-ray BDMV
0m 15.32s: volume label ANCHORMAN_D1
0m 15.33s: Source manager: add source id 0.
0m 15.35s: Source open status:DVD Yes, 2231-10-11
0m 15.35s: Source open status:BD Yes, 2231-10-11
0m 15.35s: internal path G:/BDMV/
0m 16.56s: aacs 1 bd+ 0
0m 18.59s: got bdmv
0m 18.89s: movie name: anchorman the legend of ron burgundy||anchorman_d1
0m 18.92s: got agid 0
0m 19.00s: sent host cert chal
0m 19.02s: got drive cert chal
0m 19.02s: BEC 1
0m 19.03s: DRIVE_VENDOR 0x0067
0m 19.08s: got drive key
0m 19.09s: got host key signature
0m 19.09s: verified drive signature
0m 19.10s: verified host signature
0m 19.15s: sent host signature and key point
0m 19.16s: got bus key
0m 19.16s: got volume id
0m 19.17s: got volume id mac
0m 19.17s: volume id is correct
0m 19.17s: got vid
0m 19.41s: blu-ray 7B4566B30024E2F62775C826FDA60947582FD8F5
0m 19.97s: cert BEE=0x00 same
0m 21.28s: D 3C6BDC96
0m 21.32s: main playlist 00000.mpls
0m 21.32s: selected region A
0m 21.32s: got vuk
0m 21.74s: got unit key 7
0m 46.95s: got bdmv
1m 01.30s: got extended bdinfo
1m 01.30s: opened blu-ray
1m 01.72s: Source manager: open successful.
1m 02.05s: Work manager: create Converter work 0 with source 0 and uiinfo 0( title 0 ).
1m 03.17s: ========WorkAttr::SetSource=======
1m 03.17s: Source Video Size Original : 1920 x 1080
1m 03.17s: Source Video Size Display : 1920 x 1080
1m 03.17s: Source Video FPS : 24000 / 1001
1m 03.17s: Source Video Bitrate : 1200
1m 03.17s: Source Audio Bitrate : 0
1m 03.17s: Source Audio Channels : 6
1m 03.18s: Source Audio Volume : 100
1m 03.19s: Work Profile : MKV
3m 04.15s: Work manager: create Converter work 1 with source 0 and uiinfo 0( title 0 ).
3m 04.15s: ========WorkAttr::SetSource=======
3m 04.15s: Source Video Size Original : 1920 x 1080
3m 04.15s: Source Video Size Display : 1920 x 1080
3m 04.15s: Source Video FPS : 24000 / 1001
3m 04.15s: Source Video Bitrate : 1200
3m 04.15s: Source Audio Bitrate : 0
3m 04.15s: Source Audio Channels : 6
3m 04.15s: Source Audio Volume : 100
3m 04.15s: Work Profile : MKV
7m 18.97s: Work manager: create Converter work 2 with source 0 and uiinfo 0( title 2 ).
7m 20.69s: ========WorkAttr::SetSource=======
7m 20.69s: Source Video Size Original : 1920 x 1080
7m 20.69s: Source Video Size Display : 1920 x 1080
7m 20.70s: Source Video FPS : 24000 / 1001
7m 20.70s: Source Video Bitrate : 1200
7m 20.70s: Source Audio Bitrate : 0
7m 20.70s: Source Audio Channels : 6
7m 20.70s: Source Audio Volume : 100
7m 20.70s: Work Profile : MKV
7m 48.24s: UI manager: switch to Convert mode.
8m 15.77s: UI manager: switch to Converter mode.
9m 40.61s: Work manager: create Converter work 3 with source 0 and uiinfo 0( title 0 ).
9m 40.61s: ========WorkAttr::SetSource=======
9m 40.61s: Source Video Size Original : 1920 x 1080
9m 40.61s: Source Video Size Display : 1920 x 1080
9m 40.61s: Source Video FPS : 24000 / 1001
9m 40.62s: Source Video Bitrate : 1200
9m 40.62s: Source Audio Bitrate : 0
9m 40.63s: Source Audio Channels : 6
9m 40.63s: Source Audio Volume : 100
9m 40.64s: Work Profile : MKV
10m 20.04s: UILog:OnMsgToolbar_Start
10m 20.04s: UILog:Msg Start : ready start
10m 20.05s: UILog:Msg Start : start test run work
10m 20.06s: UILog:right button to null, work falg = -1
10m 20.06s: UILog:Msg Start : run work
10m 20.07s: UILog:Run current Work.
10m 20.07s: UILog:Begin work Converter.
10m 20.07s: UILog:Begin work copy or converter.
10m 20.07s: Start check Blu-ray Ripper (3D Plus) register status.
10m 20.07s: End check Blu-ray Ripper (3D Plus) register status: Enable
10m 20.08s: UILog:start running at thread.
10m 20.08s: UILog:return flag at start running at thread ok.
10m 20.09s: OPList at BD Converter : (4113.2),(4352.2),(4612.8)
10m 20.09s: Blu-ray Converter (3D Plus) check watermark flag: 0
10m 20.09s: ------------------ convert work begin(1/1) ------------------
10m 20.09s: info: create config(bluray2video)
10m 20.10s: info: use profile(MKV)
10m 20.10s: info: bluray playlist(0),angle(0),chapter(1->21),BDAV(no)
10m 20.11s: info: 3D working_mode(disable), 3D format(sbs_lef_right)
10m 20.14s: info: stream input@ Video(4113)[codec(h264) size(1920*1080) fps(24000/1001) interlace(0) duration(0)sec opcode(compress)]
10m 20.15s: info: perset file config OK !
10m 20.15s: info: set output video frame_rate(24000/1001)
10m 20.15s: info: stream output Video(4113)[codec(h264) size(1920*1080) fps(24000/1001) interlace(0) bitrate(7458) duration(0)sec]
10m 20.15s: info: stream input@ Audio(4352)[codec(dca) channels(6) sample(48000) bitrate(0) bitdepth(24) opcode(compress)]
10m 20.16s: info: stream output Audio(4352)[codec(aac) channels(6) sample(48000) bitrate(448000) bitdepth(16) opcode(compress)]
10m 20.16s: info: stream input@ SubPicture(4612)[codec(pgssub) language(English) opcode(render)]
10m 20.16s: info: SubMode(Render) -- Display Only forced Subtitle(true)
10m 20.17s: UILog:MsgWork:WorkStatus_Start
10m 20.17s: Intel GPU acceleration for video decoding enabled
10m 20.29s: Intel GPU acceleration for video encoding enabled
10m 20.30s: info: h264_encode: encode param profile(2) level(41) bitrate(7458) crf(-1)
10m 20.51s: info: connect to sub render filter success.
10m 20.52s: info: processing source(00084.m2ts)
10m 21.01s: info: processing source(00083.m2ts)
10m 21.71s: audio decode failed ! (id=dca, pts=0.959278 sec, size=3099)
10m 34.17s: info: processing source(00007.m2ts)
12m 38.75s: info: processing source(00010.m2ts)
14m 45.18s: info: processing source(00015.m2ts)
15m 08.56s: info: processing source(00011.m2ts)
15m 20.23s: info: processing source(00016.m2ts)
20m 12.97s: info: processing source(00012.m2ts)
20m 35.47s: info: processing source(00024.m2ts)
27m 08.22s: info: processing source(00025.m2ts)
30m 49.63s: info: processing source(00026.m2ts)
31m 36.31s: info: processing source(00027.m2ts)
37m 36.15s: info: processing source(00028.m2ts)
38m 01.80s: info: processing source(00029.m2ts)
38m 11.22s: info: processing source(00030.m2ts)
38m 45.81s: info: processing source(00031.m2ts)
46m 42.96s: info: audio_decode finish job
46m 42.96s: audio_encode finish job
46m 44.82s: ------------------ convert work finished ------------------
46m 45.83s: UILog:MsgWork:current work finish : 3
46m 45.83s: UILog:Run Work to end.
46m 54.33s: Exit process: stop running.
46m 54.36s: Exit process: preview pfn_releaseplayer end
46m 54.39s: Exit process: preview pfn_deinit end
46m 54.40s: Exit process: preview FreeLibrary end
0m 00.02s:

parit

i have the "rich mahogany" edition

Phlach

I know this is an old thread, but I came across it while having the same issue (sound sync issue with Anchorman). I found a "solution" that I thought I would share. I typically rip as MKV passthrough. I tried other formats but still had the same issue.

On a whim, before ripping I clicked the "Edit" button a the top of the DVD ripper screen, then selected "Trim", then changed the beggin time to 00:00:02 and changed the end time to trim off one second (in my case, changed the end time from "01:34:06" to "01:34:05"). So, I trimmed 3 seconds in all. It ended up trimming just black screen in both cases, so didn't impact the final viewing experience, and it seemed to force the video and audio into sync! The final MKV passthrough file was perfectly in sync. Perhaps just trimming as little as one second from one end would have had the same result.

Anyway, just thought I would share since it seemed like a fairly easy workaround that others may find helpful.