ultra slow ripping

[kacos]

Both cards (meaning intel & nvidia ones), same monitor

0m 00.02s:

DVDFab 9.1.5.1 (2014/06/11 05:27:53)

0m 00.02s: Init Public log : enabled.
0m 00.02s: Init Private log : finish.
0m 00.02s: App info: 2014-6-7
0m 00.02s: App info: 9.1.5.1 9151 Beta
0m 00.02s: Init CrashReportSettings : enabled.
0m 00.02s: Init DVDInfo_Log : enabled.
0m 00.02s: Init Qt_Log : disabled.
0m 00.14s: Profile Manager :: Begin Load Profile
0m 00.14s: Qt Translator file load success
0m 00.14s: App info: client type 2.
0m 00.15s: Fabplay load: preload successful.
0m 00.21s: Fabplay load: Load successful.
0m 00.21s: Init process: Transfer settings successful.
0m 00.21s: info: fabcheck logpath= E:/Log/
0m 00.23s: info: fab_check_gpu is running ...
0m 00.58s: info: fab_check_gpu run successful
0m 00.62s: info: recommand= 851968, Shrink support= 1, enable= 1, cuda_cap= 1 , cpu_count= 8
0m 00.62s: GPU check: GPUAccelerate-880701
0m 00.62s: GPU check: GPUAccelerate setting-851968, 851968
0m 00.62s: GPU check: CUDA cap-1
0m 00.62s: GPU check: Support coreavc decode-1
0m 00.62s: GPU check: Lighting shrink status-1, 1
0m 00.62s: GPU check: Graphics info 1: Intel(R) HD Graphics 4600 : :
0m 00.62s: GPU check: Graphics info 2: NVIDIA GeForce GT 630 : 6.0 : 2.1
0m 00.62s: GPU check: Graphics info 3: NVIDIA GeForce GTX 750 Ti : 6.0 : 5.0
0m 00.63s: Init process: Load config failed.
0m 00.63s: Init process: Windows os type is 64bit System Windows 8.
0m 00.63s: Init process: command line in is
0m 00.69s: Export Blu-ray source information report : disabled
0m 00.69s: Init process: Init GPU settings successful.
0m 00.69s: Reg check: Connect type is: 0
0m 00.85s: Init preview: Begin init preview play engine.
0m 00.85s: Init preview: Begin init preview play engine(XBMC).
0m 01.15s: Init preview: Init internal engine successful.
0m 01.74s: Burn engine: start init.
0m 01.87s: Burn engine: engine type-0.
0m 01.87s: Burn engine: writer count 2.
0m 01.87s: Burn engine: 0- D:\ [HL-DT-ST BD-RE BH16NS40 1.03 (Scsi)].
0m 01.87s: Burn engine: 1- F:\ [ATAPI iHES112 3 ML05 (Scsi)].
0m 01.87s: Burn engine: end init.
0m 01.91s: Profile Manager :: End Load Profile
0m 02.65s: Init process: Init setting page successful.
0m 02.65s: QtLog Mode = false
0m 02.65s: Show UI Step 2
0m 02.93s: Show UI Step 3
0m 02.93s: Start show MainUI.
0m 02.93s: UI manager: switch to Converter mode.
0m 03.72s: allow_test : false
0m 03.94s: Init process: init main ui successful.
0m 03.97s: Init process: show main ui successful.
0m 03.97s: DriveX msg: Init driveX D with I/O mode: 0
0m 03.97s: DriveX msg: Init driveX F with I/O mode: 0
0m 04.00s: Reg check: Times of connecting error is: 0
0m 04.00s: Reg check: Parse string: ( S:d122e39e8c9d1f3e6f5d979c433a285b
0m 04.01s: Reg check: Option check status-NewWork
0m 04.04s: opening drive F
0m 04.04s: opened i/o
0m 04.04s: Supports Hybrid discs: NO
0m 04.04s: got media type 15
0m 06.95s: got max lba 9626879
0m 07.67s: got disc type 20
0m 07.67s: type Blu-ray BDMV
0m 07.67s: volume label THE_ARRIVAL_BD
0m 07.67s: DriveX msg: add media in driveX F.
0m 07.68s: DriveX msg: send open media msg to thread for driveX F.
0m 07.68s: opening drive D
0m 07.71s: opened i/o
0m 07.71s: Supports Hybrid discs: YES
0m 07.72s: Source manager: add source id 0.
0m 07.73s: Source open statusVD Yes, 2231-10-11
0m 07.73s: Source open status:BD Yes, 2231-10-11
0m 07.73s: internal path F:/BDMV/
0m 07.76s: aacs 1 bd+ 0
0m 09.32s: got bdmv
0m 09.64s: movie name: the arrival bd||the_arrival_bd
0m 09.64s: got agid 0
0m 10.49s: sent host cert chal
0m 10.50s: got drive cert chal
0m 10.50s: BEC 1
0m 10.50s: DRIVE_VENDOR 0x0080
0m 11.83s: got drive key
0m 11.83s: got host key signature
0m 11.83s: verified drive signature
0m 11.83s: verified host signature
0m 13.32s: sent host signature and key point
0m 13.32s: got bus key
0m 13.33s: got volume id
0m 13.33s: got volume id mac
0m 13.33s: volume id is correct
0m 13.34s: got vid
0m 13.80s: blu-ray 6D736A1C8CCEA87619A6F1343C951404BBD1DFE2
0m 14.32s: cert BEE=0x00
0m 16.98s: D 5B9B753D
0m 16.99s: main playlist 00001.mpls
0m 16.99s: selected region A
0m 16.99s: got vuk
0m 17.01s: got unit key 1
0m 19.88s: got bdmv
0m 21.01s: got extended bdinfo
0m 21.01s: opened blu-ray
0m 21.22s: Source manager: open successful.
0m 21.33s: Work manager: create Converter work 0 with source 0 and uiinfo 0( title 1 ).
0m 25.38s: ========WorkAttr::SetSource=======
0m 25.38s: Source Video Size Original : 1920 x 1038
0m 25.38s: Source Video Size Display : 1920 x 1038
0m 25.38s: Source Video FPS : 24000 / 1001
0m 25.38s: Source Video Bitrate : 1200
0m 25.38s: Source Audio Bitrate : 0
0m 25.38s: Source Audio Channels : 8
0m 25.38s: Source Audio Volume : 100
0m 25.38s: Work Profile : MP4
0m 51.59s: UILog:OnMsgToolbar_Start
0m 51.59s: UILog:Msg Start : ready start
0m 51.59s: UILog:Msg Start : start test run work
0m 51.60s: UILog:right button to null, work falg = -1
0m 51.60s: UILog:Msg Start : run work
0m 51.60s: UILog:Run current Work.
0m 51.60s: UILog:Begin work Converter.
0m 51.60s: UILog:Begin work copy or converter.
0m 51.60s: Start check Blu-ray Ripper (3D Plus) register status.
0m 51.60s: End check Blu-ray Ripper (3D Plus) register status: Enable
0m 51.60s: UILog:start running at thread.
0m 51.60s: UILog:return flag at start running at thread ok.
0m 51.62s: OPList at BD Converter : (4113.2),(4352.1),(4608.32),(4610.32)
0m 51.62s: Blu-ray Converter (3D Plus) check watermark flag: 0
0m 52.04s: ------------------ convert work begin(1/1) ------------------
0m 52.04s: start fab process
0m 52.04s: info: create config(bluray2video)
0m 52.04s: info: use profile(MP4)
0m 52.04s: info: bluray playlist(1),angle(0),chapter(1->29),BDAV(no)
0m 52.04s: info: 3D working_mode(disable), 3D format(sbs_lef_right)
0m 52.04s: info: stream input@ Video(4113)[codec(h264) size(1920*1080) fps(24000/1001) interlace(0) duration(0)sec opcode(compress)]
0m 52.04s: info: perset file config OK !
0m 52.05s: info: set output video frame_rate(24000/1001)
0m 52.05s: info: stream output Video(4113)[codec(h264) size(1920*1040) fps(24000/1001) interlace(0) bitrate(11969) duration(0)sec]
0m 52.05s: info: stream input@ Audio(4352)[codec(dca) channels(8) sample(48000) bitrate(0) bitdepth(24) opcode(remove_hd)]
0m 52.05s: info: stream output Audio(4352)[codec(dca) channels(8) sample(48000) bitrate(0) bitdepth(24) opcode(remove_hd)]
0m 52.05s: info: stream input@ SubPicture(4608)[codec(pgssub) language(English) opcode(remux)]
0m 52.05s: info: stream output SubPicture(4608)[codec(dvdsub) language(English)]
0m 52.05s: info: stream input@ SubPicture(4610)[codec(pgssub) language(English) opcode(remux)]
0m 52.05s: info: stream output SubPicture(4610)[codec(dvdsub) language(English)]
0m 52.05s: info: SubMode(Remux) -- Display Only forced Subtitle(false)
0m 52.05s: UILog:MsgWork:WorkStatus_Start
0m 52.05s: Intel GPU acceleration for Lightning-Shrink enabled
0m 52.05s: info: bitmap index = 1
0m 52.06s: info: h264_encode: encode param profile(1) level(40) bitrate(11969) crf(-1)
0m 52.23s: info: processing source(00000.m2ts)

02:27:53:410 info: main: The Fabcheck 1,0,3,7 - Wed Jun 11 05:27:53 2014

02:27:53:464 info: DetectAllVideoCardInfos: Intel(R) HD Graphics 4600 10.18.10.3496
02:27:53:465 info: DetectAllVideoCardInfos: NVIDIA GeForce GT 630 9.18.13.3523
02:27:53:466 info: DetectAllVideoCardInfos: NVIDIA GeForce GTX 750 Ti 9.18.13.3523
02:27:53:470 info: GetVideoCardInfoEx: Cards = 3, Enables = 3
02:27:53:472 info: GetVideoCardInfoEx: - Intel(R) HD Graphics 4600
02:27:53:473 info: IntelCPUInfo::IsIntelMediaSDKSupport: nProcessorSignature = 306c3
02:27:53:475 info: IntelCPUInfo::IsIntelMediaSDKSupport: strCPUBrand = Intel(R) Core(TM) i7-4770K CPU @ 3.50GHz
02:27:53:477 info: GetVideoCardInfoEx: - NVIDIA GeForce GT 630
02:27:53:480 info: GetVideoCardInfoEx: - NVIDIA GeForce GTX 750 Ti
02:27:53:596 info: GetVideoCardInfoEx: - 6.0 - 2.1
02:27:53:598 info: GetVideoCardInfoEx: - 6.0 - 5.0
02:27:53:630 info: gpuGetMaxGflopsGLDeviceIdDRV: device_count - 2 - cuda_api_version = 6000 -
02:27:53:633 info: gpuGetMaxGflopsGLDeviceIdDRV: bTCC - 0 - computeMode = 0 -
02:27:53:636 info: gpuGetMaxGflopsGLDeviceIdDRV: bTCC - 0 - computeMode = 0 -
02:27:53:639 info: gpuGetMaxGflopsGLDeviceIdDRV: major = 2, minor = 1, clockRate = 1620000
02:27:53:641 info: gpuGetMaxGflopsGLDeviceIdDRV: deviceName - GeForce GT 630 - benchmark divided by 10000 = 15552 -
02:27:53:644 info: gpuGetMaxGflopsGLDeviceIdDRV: major = 5, minor = 0, clockRate = 1163000
02:27:53:646 info: _ConvertSMVer2CoresDRV: MapSMtoCores for SM 5.0 is undefined. Default to use 192 Cores/SM

02:27:53:648 info: gpuGetMaxGflopsGLDeviceIdDRV: deviceName - GeForce GTX 750 Ti - benchmark divided by 10000 = 111648 -
02:27:53:650 info: DetectVideoCard_CUDA: bestCudaDetectInfo 1,1,111648,5,0,GeForce GTX 750 Ti
02:27:53:651 info: fab_check::check_cuda: cudaStatus = 0 , modeType = 56 , devCap = 1
02:27:53:652 info: fab_check::check_cuda: AcquireWriteBlock OK.
02:27:53:685 info: intel_common::get_best_hardware_apiversion: Intel Media SDK. imp = 514, API Level: 1.8
02:27:53:703 info: intel_common:etectIntelCardAttachedMonitor: Des - Intel(R) HD Graphics 4600 Ven - 8086
02:27:53:705 info: intel_common:etectIntelCardAttachedMonitor: DriverVer - 10.18.10.3496
02:27:53:706 info: intel_common::init_mfx_session: - before init - 0
02:27:53:721 info: intel_common::init_mfx_session: - after init - 0
02:27:53:722 info: fab_check::check_intelcodec: modeType = 259 , b_isQuickSyncVideoIntelCpu = 1
02:27:53:724 info: main: end

max fps to this minute = 140 ..

[glenns]

Well for the test to compare with Wilson I would only use the one card to see if that's where the problem lies.

[kacos]

You have a good PC, to use IQS and CUDA together, just connect the HD 4600 and GT750 to same monitor.

I did, they are connected to the same monitor ... :-/
And I reverted to 335.23 ..

[kacos]

ok, uninstalled nvidia 337,88, rebooted, installed 335,23 rebooted
disabled intel hd video



opened fab and tried to rip the same BD same settings as before ..
Result? Application just dissapeared (aka closed) - no warning, no anything :-/
And I tried it twice ...

0m 42.69s: UILog:OnMsgToolbar_Start
0m 42.69s: UILog:Msg Start : ready start
0m 42.69s: UILog:Msg Start : start test run work
0m 42.69s: UILog:right button to null, work falg = -1
0m 42.70s: UILog:Msg Start : run work
0m 42.70s: UILog:Run current Work.
0m 42.70s: UILog:Begin work Converter.
0m 42.70s: UILog:Begin work copy or converter.
0m 42.70s: Start check Blu-ray Ripper (3D Plus) register status.
0m 42.70s: End check Blu-ray Ripper (3D Plus) register status: Enable
0m 42.70s: UILog:start running at thread.
0m 42.70s: UILog:return flag at start running at thread ok.
0m 42.72s: OPList at BD Converter : (4113.2),(4352.1),(4608.32),(4610.32)
0m 42.72s: Blu-ray Converter (3D Plus) check watermark flag: 0
0m 43.15s: ------------------ convert work begin(1/1) ------------------
0m 43.15s: start fab process
0m 43.15s: info: create config(bluray2video)
0m 43.15s: info: use profile(MP4)
0m 43.16s: info: bluray playlist(1),angle(0),chapter(1->29),BDAV(no)
0m 43.16s: info: 3D working_mode(disable), 3D format(sbs_lef_right)
0m 43.16s: info: stream input@ Video(4113)[codec(h264) size(1920*1080) fps(24000/1001) interlace(0) duration(0)sec opcode(compress)]
0m 43.16s: info: perset file config OK !
0m 43.16s: info: set output video frame_rate(24000/1001)
0m 43.16s: info: stream output Video(4113)[codec(h264) size(1920*1040) fps(24000/1001) interlace(0) bitrate(11969) duration(0)sec]
0m 43.16s: info: stream input@ Audio(4352)[codec(dca) channels(8) sample(48000) bitrate(0) bitdepth(24) opcode(remove_hd)]
0m 43.16s: info: stream output Audio(4352)[codec(dca) channels(8) sample(48000) bitrate(0) bitdepth(24) opcode(remove_hd)]
0m 43.16s: info: stream input@ SubPicture(4608)[codec(pgssub) language(English) opcode(remux)]
0m 43.16s: info: stream output SubPicture(4608)[codec(dvdsub) language(English)]
0m 43.16s: info: stream input@ SubPicture(4610)[codec(pgssub) language(English) opcode(remux)]
0m 43.16s: info: stream output SubPicture(4610)[codec(dvdsub) language(English)]
0m 43.16s: info: SubMode(Remux) -- Display Only forced Subtitle(false)
0m 43.17s: UILog:MsgWork:WorkStatus_Start
0m 43.17s: CUDA GPU acceleration for Lightning-Shrink enabled
0m 43.17s: info: bitmap index = 1
0m 43.17s: info: h264_encode: encode param profile(1) level(40) bitrate(11969) crf(-1)

so that's for the nvidia driver

FYI, if I didn't disable the intel driver, it defaulted to intel quick sync,



and did as before (average ~120fps after the first 5 minutes), so I stopped it.

[Wilson.Wang]

Any way to combine the intel and cuda gpus to get even better results? If you could do that, it would be super :-D

You have a good PC, to use IQS and CUDA together, just connect the HD 4600 and GT750 to same monitor.

I would roll back the driver they made it work with driver 335.23 cuda v6.0 comp 5.0 so that's what i would use.I know it's not the latest version but I think it's what they used to make it work.Try that first maybe it will work on the older driver.

Forgot to say, that we are using the driver 335.23, the new driver 337.88 is released in our testing day and not get the update message.

Would you please roll back to driver 335.23 and try again? And I'll try the new driver.

Add my log file:

Fab check log:

01:49:52:092 info: DetectAllVideoCardInfos: NVIDIA GeForce GTX 750 9.18.13.3788
01:49:52:093 info: DetectAllVideoCardInfos: Intel(R) HD Graphics 9.17.10.3517
01:49:52:096 info: GetVideoCardInfoEx: Cards = 2, Enables = 1
01:49:52:099 info: GetVideoCardInfoEx: - NVIDIA GeForce GTX 750
01:49:52:120 info: GetVideoCardInfoEx: - 6.0 - 5.0
01:49:52:152 info: gpuGetMaxGflopsGLDeviceIdDRV: device_count - 1 - cuda_api_version = 6000 -
01:49:52:155 info: gpuGetMaxGflopsGLDeviceIdDRV: bTCC - 0 - computeMode = 0 -
01:49:52:156 info: gpuGetMaxGflopsGLDeviceIdDRV: major = 5, minor = 0, clockRate = 1137000
01:49:52:158 info: _ConvertSMVer2CoresDRV: MapSMtoCores for SM 5.0 is undefined. Default to use 192 Cores/SM

01:49:52:160 info: gpuGetMaxGflopsGLDeviceIdDRV: deviceName - GeForce GTX 750 - benchmark divided by 10000 = 87321 -
01:49:52:163 info: DetectVideoCard_CUDA: bestCudaDetectInfo 1,0,87321,5,0,GeForce GTX 750
01:49:52:165 info: fab_check::check_cuda: cudaStatus = 0 , modeType = 56 , devCap = 1
01:49:52:166 info: fab_check::check_cuda: AcquireWriteBlock OK.
01:49:52:168 info: IntelCPUInfo::IsIntelMediaSDKSupport: nProcessorSignature = 206a7
01:49:52:169 info: IntelCPUInfo::IsIntelMediaSDKSupport: strCPUBrand = Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz
01:49:52:172 info: fab_check::check_intelcodec: modeType = 0 , b_isQuickSyncVideoIntelCpu = 1
01:49:52:174 info: main: end

Internal log:

0m 00.09s: opening iso D:/Source/H264/THE HUNGER GAMES-HongKong.iso
0m 00.11s: got media type 15
0m 00.11s: got max lba 24359295
0m 00.18s: got disc type 20
0m 00.18s: type Blu-ray BDMV
0m 00.18s: volume label THE HUNGER GAMES
0m 00.18s: internal path [:/BDMV/
0m 00.18s: aacs 0 bd+ 0
0m 00.26s: got bdmv
0m 00.32s: movie name: the hunger games||the hunger games-hongkong
0m 00.33s: got bdmv
0m 00.61s: got extended bdinfo
0m 00.61s: opened blu-ray
0m 00.61s: info: create config(bluray2video)
0m 00.61s: info: use profile(MP4)
0m 00.61s: info: bluray playlist(1),angle(0),chapter(1->19),BDAV(no)
0m 00.61s: info: 3D working_mode(disable), 3D format(sbs_lef_right)
0m 00.62s: info: stream input@ Video(4113)[codec(h264) size(1920*1080) fps(24000/1001) interlace(0) duration(0)sec opcode(compress)]
0m 00.62s: info: perset file config OK !
0m 00.62s: info: set output video frame_rate(24000/1001)
0m 00.62s: info: recommand= 8248, Shrink support= 1, enable= 1, cuda_cap= 1 , cpu_count= 4
0m 00.62s: info: stream output Video(4113)[codec(h264) size(1920*800) fps(24000/1001) interlace(0) bitrate(5488) duration(0)sec]
0m 00.63s: info: stream input@ Audio(4352)[codec(truehd) channels(8) sample(96000) bitrate(640000) bitdepth(16) opcode(remove_hd)]
0m 00.63s: info: stream output Audio(4352)[codec(truehd) channels(8) sample(96000) bitrate(640000) bitdepth(16) opcode(remove_hd)]
0m 00.63s: info: stream input@ SubPicture(4608)[codec(pgssub) language(Chinese) opcode(remux)]
0m 00.63s: info: stream output SubPicture(4608)[codec(dvdsub) language(Chinese)]
0m 00.63s: info: SubMode(Remux) -- Display Only forced Subtitle(false)
1m 32.32s: UILog:MsgWork:WorkStatus_Start
1m 32.32s: UILog:MsgWork:WorkStatus_Start
0m 00.65s: CUDA GPU acceleration for Lightning-Shrink enabled
0m 00.65s: info: bitmap index = 1
0m 00.65s: info: h264_encode: encode param profile(1) level(40) bitrate(5488) crf(-1)
0m 00.87s: info: processing source(00003.m2ts)

Wilson

[kacos]

..I would roll back the driver they made it work with driver 335.23 ...

will give it a try and come back with the results in a few minutes

[glenns]

Ok he was quoting your log but said he had the same message in his logs so maybe he has the same card anyway or why would he get the same message in his log files?

I would roll back the driver they made it work with driver 335.23 cuda v6.0 comp 5.0 so that's what i would use.I know it's not the latest version but I think it's what they used to make it work.Try that first maybe it will work on the older driver.Also make sure your using 9151 beta that's the one that has the firmware.

[kacos]

I'll add my log file and converting screenshot with GT750 later.

Support CUDA 5.0 is a new function. We should help kacos to resolve the issue that converting crash with GT750 Ti.

In our testing, the conversion speed is 180~250 fps in ripper when converting with CUDA lightning-shrink. (ISO file in HDD).

Wilson

Thank you Wilson !
180~250 fps sounds good
Any way to combine the intel and cuda gpus to get even better results? If you could do that, it would be super :-D

[Wilson.Wang]

I'll add my log file and converting screenshot with GT750 later.

Support CUDA 5.0 is a new function. We should help kacos to resolve the issue that converting crash with GT750 Ti.

In our testing, the conversion speed is 180~250 fps in ripper when converting with CUDA lightning-shrink. (ISO file in HDD).

Wilson

[kacos]

.. remember Wilson's log he was using the same GT750 card ...

where is that log?

[glenns]

I won't say that yet remember Wilson's log he was using the same GT750 card and if that's so good just use it alone and see the results.

[kacos]

I also thought of a way to test with cuda only and Fab use version 8 of fab it doesn't have lightning shrink.

I missed this one
I don't think that will work for the same reason fab 9 didn't, it does not support the current nvidia drivers needed for the 750

[kacos]

hahahaha

I have 24Gb on the i7-4770 and I was ripping the Arrival (114mins) to mp4 H.264 1 pass, audio passthrough and subtitle copy directly to a 50Gb sata3 ssd .. that's why I was wondering

From BOINC logs:

11/06/2014 01:38:58 | | CUDA: NVIDIA GPU 0 (not used): GeForce GT 630 (driver version 337.88, CUDA version 6.0, compute capability 2.1, 4096MB, 3983MB available, 311 GFLOPS peak)
11/06/2014 01:38:58 | | CUDA: NVIDIA GPU 1: GeForce GTX 750 Ti (driver version 337.88, CUDA version 6.0, compute capability 5.0, 2048MB, 1944MB available, 2233 GFLOPS peak)
11/06/2014 01:38:58 | | OpenCL: Intel GPU 0: Intel(R) HD Graphics 4600 (driver version 10.18.10.3496, device version OpenCL 1.2, 1246MB, 1246MB available, 200 GFLOPS peak)
11/06/2014 01:38:58 | | OpenCL CPU: Intel(R) Core(TM) i7-4770K CPU @ 3.50GHz (OpenCL driver vendor: Intel(R) Corporation, driver version 3.0.1.10878, device version OpenCL 1.2 (Build 76413))
11/06/2014 01:38:58 | | Processor: 8 GenuineIntel Intel(R) Core(TM) i7-4770K CPU @ 3.50GHz [Family 6 Model 60 Stepping 3]
11/06/2014 01:38:58 | | Processor features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss htt tm pni ssse3 fma cx16 sse4_1 sse4_2 movebe popcnt aes syscall nx lm vmx tm2 pbe
11/06/2014 01:38:58 | | OS: Microsoft Windows 8.1: Professional with Media Center x64 Edition, (06.03.9600.00)
11/06/2014 01:38:58 | | Memory: 23.68 GB physical, 47.68 GB virtual

so talking about GPU power
(GFLOPS = Unit of computing capacity equal to one billion (10^9) floating point operations per second.)

Core i7-4770K (Haswell) ->177 GFLOPS
HD Graphics 4600 -> 200 Gflops
Nvidia GT630 -> 311Gflops
Nvidia GT750 -> 2233 Gflops

See the difference?

[glenns]

I have the 3773 I7 but I was ripping from a movie already on the drive was yours? Also The settings I used were audio copy so theirs no encoding for the sound and I used the default settings for the profile if I set the bit rate up or don't use audio copy the FPS should slow down with more work added.

Everything counts I have very fast memory 8 gigs this makes a small difference as well as the movie itself a lot of movement in actions movies and dark pictures like Batman movies will take the speed in FPS down as it's harder to encode than a slow moving picture with little action.

The movie I tested for you is called The Awakening (blu ray) with the mentioned settings.
I haven't watched it yet so I don't know whats in the horror movie how long in time it is and if no action or lots etc.

Now that you had your holly crap batman this is fast moment enjoy it you paid for speed now it's here without expensive internal cuda cards.Time for a cold beer I earned my pass it forwards reward.

[kacos]

lol, thanks man, will do.
At least I halved the time to 20mins from 40 .. that's something at least.

But seriously, if we could use the combined gpu processing power (as does BOINC or similar programs) I bet it would take less than 10mins to rip a BD on an i7.. How on earth did you get 10minutes to rip? Which i7 do you have?

Edit: previous rip of the film = 11.6Gb - This new one = 10.9Gb