ultra slow ripping

[glenns]

Happy now? No more cuda your using Quick sync with lightning shrink.like a poet that don't know it.
Your training is now complete your the Master pay it forwards teach others what you have learned here today.

[kacos]

max fps I've seen is 143

Here are the logs for this session (Intel lightning Shrink)
I don't think it uses nvidia cuda at all now

info: fab_check::check_cuda: AcquireWriteBlock OK.
21:23:56:737 info: intel_common::get_best_hardware_apiversion: Intel Media SDK. imp = 514, API Level: 1.8
21:23:56:751 info: intel_common:etectIntelCardAttachedMonitor: Des - Intel(R) HD Graphics 4600 Ven - 8086
21:23:56:754 info: intel_common:etectIntelCardAttachedMonitor: DriverVer - 10.18.10.3496
21:23:56:757 info: intel_common::init_mfx_session: - before init - 0
21:23:56:772 info: intel_common::init_mfx_session: - after init - 0
21:23:56:774 info: fab_check::check_intelcodec: modeType = 259 , b_isQuickSyncVideoIntelCpu = 1
21:23:56:777 info: main: end

DVDFab 9.1.5.1 (2014/06/11 00:23:55)

0m 00.09s: Init Public log : enabled.
0m 00.09s: Init Private log : finish.
0m 00.09s: App info: 2014-6-7
0m 00.09s: App info: 9.1.5.1 9151 Beta
0m 00.16s: Init CrashReportSettings : enabled.
0m 00.16s: Init DVDInfo_Log : enabled.
0m 00.16s: Init Qt_Log : disabled.
0m 00.50s: Profile Manager :: Begin Load Profile
0m 00.50s: Qt Translator file load success
0m 00.50s: App info: client type 2.
0m 00.52s: Fabplay load: preload successful.
0m 00.56s: Fabplay load: Load successful.
0m 00.57s: Init process: Transfer settings successful.
0m 00.57s: info: fabcheck logpath= E:/Log/
0m 00.60s: info: fab_check_gpu is running ...
0m 01.23s: info: fab_check_gpu run successful
0m 01.28s: info: recommand= 851968, Shrink support= 1, enable= 1, cuda_cap= 1 , cpu_count= 8
0m 01.28s: GPU check: GPUAccelerate-880701
0m 01.28s: GPU check: GPUAccelerate setting-851968, 851968
0m 01.28s: GPU check: CUDA cap-1
0m 01.28s: GPU check: Support coreavc decode-1
0m 01.28s: GPU check: Lighting shrink status-1, 1
0m 01.28s: GPU check: Graphics info 1: Intel(R) HD Graphics 4600 : :
0m 01.28s: GPU check: Graphics info 2: NVIDIA GeForce GT 630 : 6.0 : 2.1
0m 01.28s: GPU check: Graphics info 3: NVIDIA GeForce GTX 750 Ti : 6.0 : 5.0
0m 01.29s: Init process: Load config failed.
0m 01.31s: Init process: Windows os type is 64bit System Windows 8.1
0m 01.31s: Init process: command line in is
..
0m 01.37s: App info: language type ENU.
0m 01.37s: Reg check: Start get sys number.
0m 01.37s: Export Blu-ray source information report : disabled
0m 01.37s: Init process: Init GPU settings successful.
..
0m 01.37s: Reg check: Connect type is: 0
0m 01.50s: Init preview: Begin init preview play engine.
0m 01.50s: Init preview: Begin init preview play engine(XBMC).
0m 01.84s: Init preview: Init internal engine successful.
0m 02.03s: Profile Manager :: End Load Profile
0m 02.35s: Burn engine: start init.
0m 02.64s: Reg check: Times of connecting error is: 0
..
0m 04.07s: Burn engine: engine type-0.
0m 04.07s: Burn engine: writer count 2.
0m 04.07s: Burn engine: 0- D:\ [HL-DT-ST BD-RE BH16NS40 1.03 (Scsi)].
0m 04.07s: Burn engine: 1- F:\ [ATAPI iHES112 3 ML05 (Scsi)].
0m 04.07s: Burn engine: end init.
0m 04.78s: Init process: Init setting page successful.
0m 04.79s: QtLog Mode = false
0m 04.79s: Show UI Step 2
0m 05.05s: Show UI Step 3
0m 05.05s: Start show MainUI.
0m 05.05s: UI manager: switch to Converter mode.
0m 05.83s: allow_test : false
0m 06.11s: Init process: init main ui successful.
0m 06.16s: Init process: show main ui successful.
0m 06.16s: DriveX msg: Init driveX D with I/O mode: 0
0m 06.16s: DriveX msg: Init driveX F with I/O mode: 0
0m 06.24s: opening drive F
0m 06.24s: opened i/o
0m 06.24s: Supports Hybrid discs: NO
0m 06.24s: got media type 15
0m 06.51s: got max lba 9626879
0m 07.09s: got disc type 20
0m 07.09s: type Blu-ray BDMV
0m 07.09s: volume label THE_ARRIVAL_BD
0m 07.10s: DriveX msg: add media in driveX F.
0m 07.10s: DriveX msg: send open media msg to thread for driveX F.
0m 08.67s: opening drive D
0m 08.72s: opened i/o
0m 08.72s: Supports Hybrid discs: YES
0m 08.73s: Source manager: add source id 0.
0m 08.73s: Source open statusVD Yes, 2231-10-11
0m 08.73s: Source open status:BD Yes, 2231-10-11
0m 08.73s: internal path F:/BDMV/
0m 08.79s: aacs 1 bd+ 0
0m 10.43s: got bdmv
0m 10.79s: movie name: the arrival bd||the_arrival_bd
0m 10.79s: got agid 0
0m 11.63s: sent host cert chal
0m 11.64s: got drive cert chal
0m 11.64s: BEC 1
0m 11.64s: DRIVE_VENDOR 0x0080
0m 12.91s: got drive key
0m 12.91s: got host key signature
0m 12.91s: verified drive signature
0m 12.91s: verified host signature
0m 14.31s: sent host signature and key point
0m 14.31s: got bus key
0m 14.32s: got volume id
0m 14.32s: got volume id mac
0m 14.32s: volume id is correct
0m 14.32s: got vid
0m 14.79s: blu-ray 6D736A1C8CCEA87619A6F1343C951404BBD1DFE2
0m 15.31s: cert BEE=0x00
0m 23.59s: D 5B9B753D
0m 23.59s: main playlist 00001.mpls
0m 23.59s: selected region A
0m 23.59s: got vuk
0m 23.63s: got unit key 1
0m 26.52s: got bdmv
0m 27.83s: got extended bdinfo
0m 27.83s: opened blu-ray
0m 28.21s: Source manager: open successful.
0m 28.40s: Work manager: create Converter work 0 with source 0 and uiinfo 0( title 1 ).
0m 33.54s: ========WorkAttr::SetSource=======
0m 33.54s: Source Video Size Original : 1920 x 1038
0m 33.54s: Source Video Size Display : 1920 x 1038
0m 33.54s: Source Video FPS : 24000 / 1001
0m 33.54s: Source Video Bitrate : 1200
0m 33.54s: Source Audio Bitrate : 0
0m 33.54s: Source Audio Channels : 8
0m 33.54s: Source Audio Volume : 100
0m 33.54s: Work Profile : MP4
0m 57.17s: UILog:OnMsgToolbar_Start
0m 57.18s: UILog:Msg Start : ready start
0m 57.18s: UILog:Msg Start : start test run work
0m 57.18s: UILog:right button to null, work falg = -1
0m 57.18s: UILog:Msg Start : run work
0m 57.18s: UILog:Run current Work.
0m 57.18s: UILog:Begin work Converter.
0m 57.18s: UILog:Begin work copy or converter.
0m 57.18s: Start check Blu-ray Ripper (3D Plus) register status.
0m 57.18s: End check Blu-ray Ripper (3D Plus) register status: Enable
0m 57.18s: UILog:start running at thread.
0m 57.18s: UILog:return flag at start running at thread ok.
0m 57.20s: OPList at BD Converter : (4113.2),(4352.1),(4608.32),(4610.32)
0m 57.21s: Blu-ray Converter (3D Plus) check watermark flag: 0
0m 57.69s: ------------------ convert work begin(1/1) ------------------
0m 57.69s: start fab process
0m 57.69s: info: create config(bluray2video)
0m 57.69s: info: use profile(MP4)
0m 57.69s: info: bluray playlist(1),angle(0),chapter(1->29),BDAV(no)
0m 57.69s: info: 3D working_mode(disable), 3D format(sbs_lef_right)
0m 57.69s: info: stream input@ Video(4113)[codec(h264) size(1920*1080) fps(24000/1001) interlace(0) duration(0)sec opcode(compress)]
0m 57.70s: info: perset file config OK !
0m 57.70s: info: set output video frame_rate(24000/1001)
0m 57.70s: info: stream output Video(4113)[codec(h264) size(1920*1040) fps(24000/1001) interlace(0) bitrate(11969) duration(0)sec]
0m 57.70s: info: stream input@ Audio(4352)[codec(dca) channels(8) sample(48000) bitrate(0) bitdepth(24) opcode(remove_hd)]
0m 57.70s: info: stream output Audio(4352)[codec(dca) channels(8) sample(48000) bitrate(0) bitdepth(24) opcode(remove_hd)]
0m 57.70s: info: stream input@ SubPicture(4608)[codec(pgssub) language(English) opcode(remux)]
0m 57.70s: info: stream output SubPicture(4608)[codec(dvdsub) language(English)]
0m 57.70s: info: stream input@ SubPicture(4610)[codec(pgssub) language(English) opcode(remux)]
0m 57.70s: info: stream output SubPicture(4610)[codec(dvdsub) language(English)]
0m 57.70s: info: SubMode(Remux) -- Display Only forced Subtitle(false)
0m 57.71s: UILog:MsgWork:WorkStatus_Start
0m 57.71s: Intel GPU acceleration for Lightning-Shrink enabled
0m 57.71s: info: bitmap index = 1
0m 57.71s: info: h264_encode: encode param profile(1) level(40) bitrate(11969) crf(-1)
0m 57.88s: info: processing source(00000.m2ts)
2m 26.80s: info: intel Lightning-Shrink mfxStatus = 0 ,m_frame_out_count= 10000
3m 48.15s: info: intel Lightning-Shrink mfxStatus = 0 ,m_frame_out_count= 20000
5m 01.03s: info: intel Lightning-Shrink mfxStatus = 0 ,m_frame_out_count= 30000
6m 05.88s: info: intel Lightning-Shrink mfxStatus = 0 ,m_frame_out_count= 40000
7m 16.07s: info: intel Lightning-Shrink mfxStatus = 0 ,m_frame_out_count= 50000
8m 29.30s: info: intel Lightning-Shrink mfxStatus = 0 ,m_frame_out_count= 60000
9m 40.19s: info: intel Lightning-Shrink mfxStatus = 0 ,m_frame_out_count= 70000
10m 52.90s: info: intel Lightning-Shrink mfxStatus = 0 ,m_frame_out_count= 80000
12m 02.38s: info: intel Lightning-Shrink mfxStatus = 0 ,m_frame_out_count= 90000

14min out another 5 to go ..

edit: ok done

Settings:

[kacos]

hold your horses
Still downloading .. intel's site is slooooow

[glenns]

Well give results please does it work and your FPS.

[kacos]

Take the U.S. version off the drive use the free cc cleaner (free on the internet) to clean the registry run it 2-3 times till it shows no problems then just download from the Forum or front page of fab from any non U.S. country your in FaB will know from your ip address if your not in the U.S. and give you the proper version for your location.

ok, done - many thanks again

[glenns]

Take the U.S. version off the drive use the free cc cleaner (free on the internet) to clean the registry run it 2-3 times till it shows no problems then just download from the Forum or front page of fab from any non U.S. country your in FaB will know from your ip address if your not in the U.S. and give you the proper version for your location.

[kacos]

here's the link how to use quick sync with Fab you need to plug your monitor into the mother board.
Don't download the newest driver 3621 it has a problem but we are using driver 3496 now 2712 is the earlier driver that also works with fab.If your lucky you just plug your monitor in to the mother board then check fab settings and see if you see QS enabled as my screen shot if not then their are bios settings to set or maybe just pulling out the cards will work.

Those FPS speeds were for doing what I said if your converting to something else for reducing from 50-25 FPS is 80-100 avg.On a I7 processor.

Thanks !

I also noticed your LG burner drive is one version of firmware out of date update here follow all directions or you can render the drive useless.

You should be using 103AO version.

Thanks again - missed this one
(Actually I got the BH one (link ))

On the 2 newest versions of Fab if your in the USA they no longer decrypt blu rays at all only dvd's.You need to find another free program to do so some are listed by Fab the internet is your friend here.

Oh Oh - I didn't know that, and the fab 5 I got says US in the end - I am not in the USA - how do I change it so that it can continue to decrypt?

[glenns]

I also thought of a way to test with cuda only and Fab use version 8 of fab it doesn't have lightning shrink.

[glenns]

here's the link how to use quick sync with Fab you need to plug your monitor into the mother board.
Don't download the newest driver 3621 it has a problem but we are using driver 3496 now 2712 is the earlier driver that also works with fab.If your lucky you just plug your monitor in to the mother board then check fab settings and see if you see QS enabled as my screen shot if not then their are bios settings to set or maybe just pulling out the cards will work.

Those FPS speeds were for doing what I said if your converting to something else for reducing from 50-25 FPS is 80-100 avg.On a I7 processor.

I also noticed your LG burner drive is one version of firmware out of date update here follow all directions or you can render the drive useless.

You should be using 103AO version.

On the 2 newest versions of Fab if your in the USA they no longer decrypt blu rays at all only dvd's.You need to find another free program to do so some are listed by Fab the internet is your friend here.

[kacos]

Looks like the check-box unticking is irrelevant to the process.
Yes I just tried with quick sync same thing ticked or unticked the lightning shrink is always on so no way to test cuda without it.

Have you ever tried the intel quick sync by connecting the monitor to it as it's really fast I got 235 plus fps about 10 mins to convert turning a movie on the drive to mp4 audio copy with Fabs default settings.Is the cards with cuda much faster?

235+ fps???? Really?
How do you enable the intel one? I have no idea as I never used it (yet).

I wouldn't know since I haven't tested my currect cuda config with dvdfab in this PC (which is the fastest I have).
Without any GPU acceleration I got 60-70fps

Btw, I uninstalled the beta and installed v5 official again and got this:



and come to think of it, now I remember this was one of the two films I had to use dvd-shrink to rip :-/

Anyway, I tried another BD (The Arrival) with the beta just now, and it also crashed.

[glenns]

Looks like the check-box unticking is irrelevant to the process.
Yes I just tried with quick sync same thing ticked or unticked the lightning shrink is always on so no way to test cuda without it.

Have you ever tried the intel quick sync by connecting the monitor to it as it's really fast I got 235 plus fps about 10 mins to convert turning a movie on the drive to mp4 audio copy with Fabs default settings.Is the cards with cuda much faster?

[kacos]

Ok, I did a full uninstall, and re-installed and tried to rip same film again (I already have ripped it in mp4 a month ago so I know the film is ok).

Program crashed again, but I noticed this in the log:

0m 00.04s: Init Public log : enabled.
0m 00.04s: Init Private log : finish.
0m 00.04s: App info: 2014-6-7
0m 00.04s: App info: 9.1.5.1 9151 Beta
0m 00.04s: Init CrashReportSettings : enabled.
0m 00.04s: Init DVDInfo_Log : enabled.
0m 00.04s: Init Qt_Log : disabled.
0m 00.15s: Profile Manager :: Begin Load Profile
0m 00.15s: Qt Translator file load success
0m 00.15s: App info: client type 2.
0m 00.15s: Init process: Transfer settings successful.
0m 00.15s: warning: FabPlay: invalid gpu detect handle
0m 00.15s: GPU check: GPUAccelerate-0
0m 00.15s: GPU check: GPUAccelerate setting-0, 0
0m 00.15s: GPU check: CUDA cap-0
0m 00.15s: GPU check: Support coreavc decode-0
0m 00.15s: GPU check: Lighting shrink status-0, 0
0m 00.16s: Init process: Load config failed.
0m 00.16s: Init process: Windows os type is 64bit System Windows 8.
0m 00.16s: Init process: command line in is /install /language "English"
0m 00.29s: Install Update Language: language file is C:/Program Files (x86)/DVDFab 9/QLanguage/FabQt_ENU.qm .
0m 00.30s: Init process: install process.
0m 01.60s: Profile Manager :: End Load Profile
0m 00.02s:
...

What does this mean? "invalid gpu detect handle" ?
And why do I get the "Load config failed" everytime?

[kacos]

Looks like lightning shrink was still on in the photo you put up is it still on in the log file made with it unchecked?

the 2 captures were made consecutively - it was disabled in the menu options but look at the second capture and the internal log:

0m 57.34s: UILog:MsgWork:WorkStatus_Start
0m 57.34s: CUDA GPU acceleration for Lightning-Shrink enabled
0m 57.34s: info: bitmap index = 1
0m 57.34s: info: h264_encode: encode param profile(1) level(40) bitrate(11923) crf(-1)
1m 04.96s: terminate process

18:19:31:948 info: gpuGetMaxGflopsGLDeviceIdDRV: bTCC - 0 - computeMode = 0 -
18:19:31:949 info: gpuGetMaxGflopsGLDeviceIdDRV: bTCC - 0 - computeMode = 0 -
18:19:31:951 info: gpuGetMaxGflopsGLDeviceIdDRV: major = 2, minor = 1, clockRate = 1620000
18:19:31:952 info: gpuGetMaxGflopsGLDeviceIdDRV: deviceName - GeForce GT 630 - benchmark divided by 10000 = 15552 -
18:19:31:955 info: gpuGetMaxGflopsGLDeviceIdDRV: major = 5, minor = 0, clockRate = 1163000
18:19:31:956 info: _ConvertSMVer2CoresDRV: MapSMtoCores for SM 5.0 is undefined. Default to use 192 Cores/SM

18:19:31:958 info: gpuGetMaxGflopsGLDeviceIdDRV: deviceName - GeForce GTX 750 Ti - benchmark divided by 10000 = 111648 -
18:19:31:960 info: DetectVideoCard_CUDA: bestCudaDetectInfo 1,1,111648,5,0,GeForce GTX 750 Ti
18:19:31:961 info: fab_check::check_cuda: cudaStatus = 0 , modeType = 56 , devCap = 1
18:19:31:962 info: fab_check::check_cuda: AcquireWriteBlock OK.
18:19:31:963 info: IntelCPUInfo::IsIntelMediaSDKSupport: nProcessorSignature = 306c3
18:19:31:964 info: IntelCPUInfo::IsIntelMediaSDKSupport: strCPUBrand = Intel(R) Core(TM) i7-4770K CPU @ 3.50GHz
18:19:31:966 info: fab_check::check_intelcodec: modeType = 0 , b_isQuickSyncVideoIntelCpu = 1
18:19:31:967 info: main: end

Looks like the check-box unticking is irrelevant to the process

[glenns]

Looks like lightning shrink was still on in the photo you put up is it still on in the log file made with it unchecked?

[kacos]

.. just to see if its that as it works for Wilson.

to be comparable, I would suggest the programmers do some similar multi GPU configuration tests. In a previous version I tried 4 different GPUs before I found the optimum that worked with that version of fab. I already ripped over a 1500 DVD's/BD's the past months, and now am discovering some problems with some of the rips and re-ripping them. The point of multiple gpu's is to speed things up ..

In version 5 I also had to use dvd-passkey (manually disable the dvdfab exclusion) to be able to rip a film with dvdfab (??), as dvdfab couldn't get rid of the encryption.

Do you have the two cards tied together, SLI per chance?

I do have two cards plus the intel one (I think it's dissabled) but not in SLI mode.