DVD Ripper only rips part of the movie and claims complete

[tiny705]

I have had this happen a few times, but here is the most recent. Any help is appreciated. It only ripped 1:14 out of a 2:15 movie. Using 9.1.4.0. Windows 7. It chimes and says that it is complete. Here is the internal log:


0m 04.33s: Init Public log : enabled.
0m 04.35s: Init Private log : finish.
0m 04.36s: App info: 2014-4-17
0m 04.36s: App info: 9.1.4.0 9140 Official
0m 04.68s: Init CrashReportSettings : enabled.
0m 04.69s: Init DVDInfo_Log : enabled.
0m 04.71s: Init Qt_Log : disabled.
0m 09.64s: Profile Manager :: Begin Load Profile
0m 09.92s: Qt Translator file load success
0m 10.09s: App info: client type 2.
0m 10.17s: Fabplay load: preload successful.
0m 10.26s: Fabplay load: Load successful.
0m 10.28s: Init process: Transfer settings successful.
0m 10.28s: info: fabcheck logpath= C:/Users/Lisa/Documents/DVDFab9/Log/
0m 10.76s: fab_check_gpu is running ...
0m 13.02s: fab_check_gpu run successful
0m 13.02s: info: recommand= 0, Shrink support= 0, enable= 0, cuda_cap= 0 , cpu_count= 2
0m 13.04s: GPU check: GPUAccelerate-0
0m 13.04s: GPU check: GPUAccelerate setting-0, 0
0m 13.04s: GPU check: CUDA cap-0
0m 13.05s: GPU check: Support coreavc decode-0
0m 13.05s: GPU check: Lighting shrink status-0, 0
0m 13.05s: GPU check: Graphics info 1: Mobile Intel(R) 4 Series Express Chipset Family : :
0m 13.05s: GPU check: Graphics info 2: : :
0m 13.07s: Init process: Load config successful.
0m 13.07s: Init process: Windows os type is 13.
0m 13.08s: Init process: command line in is
0m 15.02s: Reg check: Parse string: ( 11:8260762964 )( 21:8260762964 )( 22:8260762964 )( 1:0 )( 2:0 )( OV:9140 )( BV:9139 )( S:f15ee5a081ac4ebb21873f881e6217bf )
0m 15.05s: Reg check: Option check status-Local
0m 15.05s: Reg check: ( HD Decrypter:1:0 )-( DVD to DVD (Gold):0:0 )-( DVD to DVD:0:0 )-( DVD to Mobile:1:1 )-( Blu-ray to Blu-ray:0:0 )-( Blu-ray to Mobile:1:1 )-( File to Mobile:0:0 )-( Blu-ray to DVD:0:0 )-( File to DVD:0:0 )-( File to Blu-ray:0:0 )-( File Mover:1:0 )-( Blu-ray to 3D:1:1 )-( 2D to 3D:0:0 )-( Blu-ray Decrypt:1:0 )-( DVD Decrypt:1:0 )-
0m 15.05s: App info: language type ENU.
0m 15.07s: Reg check: Start get sys number.
0m 15.07s: Init process: Init GPU settings successful.
0m 15.07s: Reg check: Serial number is: 00-24-d6-5a-0c-89:00-24-d6-5a-0c-88:a4-ba-db-b2-6b-f4
0m 15.08s: Reg check: Connect type is: 0
0m 16.02s: Init preview: Begin init preview play engine.
0m 16.02s: Init preview: Begin init preview play engine(XBMC).
0m 16.42s: Reg check: Times of connecting error is: 0
0m 16.42s: Reg check: Parse string: ( S:6f272c11361c6218dcb2dbd8b7e5a231
0m 21.15s: Reg check: Option check status-NewWork
0m 21.18s: Reg check: ( HD Decrypter:1:0 )-( DVD to DVD (Gold):0:0 )-( DVD to DVD:0:0 )-( DVD to Mobile:1:1 )-( Blu-ray to Blu-ray:1:0 )-( Blu-ray to Mobile:1:1 )-( File to Mobile:1:0 )-( Blu-ray to DVD:1:0 )-( File to DVD:1:0 )-( File to Blu-ray:1:0 )-( File Mover:1:0 )-( Blu-ray to 3D:1:1 )-( 2D to 3D:1:0 )-( Blu-ray Decrypt:1:0 )-( DVD Decrypt:1:0 )-
0m 21.40s: Init preview: Init internal engine successful.
0m 26.65s: Burn engine: start init.
0m 35.90s: Burn engine: engine type-0.
0m 35.90s: Burn engine: writer count 1.
0m 35.90s: Burn engine: 0- D:\ [TSSTcorp DVD+-RW TS-L633C DW40 (Ide)].
0m 35.91s: Burn engine: end init.
0m 37.26s: Init process: Init setting page successful.
0m 37.27s: QtLog Mode = false
0m 37.27s: Show UI Step 2
0m 37.91s: Show UI Step 3
0m 37.92s: Start show MainUI.
0m 37.93s: UI manager: switch to Converter mode.
0m 39.54s: allow_test : false
0m 39.55s: fab_app_path : C:/Program Files (x86)/DVDFab 9/
0m 39.55s: fab_app_name : DVDFab.exe
0m 39.55s: fab_client_type : 2
0m 39.56s: product_name : DVDFab
0m 39.56s: test_url : http://www.dvdfab.cn
0m 39.57s: down_url : http://www.dvdfab.cn/download.htm?ver=9
0m 39.57s: current_version_type : Official
0m 39.58s: update_temp_path : C:/Users/Lisa/Documents/DVDFab9/Temp/updateTemp/
0m 39.58s: current_version : 9140
0m 39.58s: language_name : ENU
0m 39.59s: qm_file : C:/Program Files (x86)/DVDFab 9/QLanguage/FabQt_ENU.qm
0m 39.59s: allow_beta : false
0m 42.42s: Init process: init main ui successful.
0m 43.32s: Init process: show main ui successful.
0m 43.35s: DriveX msg: Init driveX D with I/O mode: 0
0m 43.36s: opening drive D
0m 43.36s: opened i/o
0m 43.38s: got media type 4
0m 46.58s: got max lba 2502255
0m 46.59s: got disc type 10
0m 46.67s: type DVD-VIDEO
0m 46.68s: volume label WARRIOR
0m 46.69s: DriveX msg: add media in driveX D.
0m 46.70s: DriveX msg: send open media msg to thread for driveX D.
0m 52.02s: opening drive D
0m 52.03s: opened i/o
0m 52.03s: got media type 4
0m 52.17s: got max lba 2502255
0m 52.18s: got disc type 10
0m 52.26s: type DVD-VIDEO
0m 52.27s: volume label WARRIOR
0m 52.28s: Source manager: add source id 0.
0m 52.31s: Source open statusVD Yes, 2231-10-11
0m 52.33s: Source open status:BD Yes, 2231-10-11
0m 52.34s: internal path D:/VIDEO_TS/
0m 52.35s: got copyright 1 fe
0m 53.31s: got udf/iso
0m 53.50s: Profile Manager :: End Load Profile
0m 55.15s: got discinfo
0m 55.18s: pathplayer enabled
1m 02.65s: button: vts_1 menu_1 pgc_7 cell_1 sector_106 count_4
1m 14.90s: button: vts_1 menu_1 pgc_8 cell_1 sector_23197 count_7
1m 16.10s: button: vts_1 menu_1 pgc_9 cell_1 sector_23260 count_6
1m 16.17s: button: vts_1 menu_1 pgc_10 cell_1 sector_23339 count_7
1m 16.22s: button: vts_1 menu_1 pgc_11 cell_1 sector_23415 count_7
1m 16.29s: button: vts_1 menu_1 pgc_12 cell_1 sector_23493 count_7
1m 16.35s: button: vts_1 menu_1 pgc_13 cell_1 sector_23570 count_7
1m 16.42s: button: vts_1 menu_1 pgc_14 cell_1 sector_23651 count_6
1m 18.94s: got dvdinfo
1m 18.95s: opened dvd
1m 18.95s: Source manager: open successful.
1m 19.36s: Work manager: create Converter work 0 with source 0 and uiinfo 0( title 0 ).
1m 29.72s: ========WorkAttr::SetSource=======
1m 29.73s: Source Video Size Original : 720 x 303
1m 29.73s: Source Video Size Display : 854 x 360
1m 29.73s: Source Video FPS : 24000 / 1001
1m 29.74s: Source Video Bitrate : 1200
1m 29.74s: Source Audio Bitrate : 448000
1m 29.75s: Source Audio Channels : 6
1m 29.75s: Source Audio Volume : 100
1m 29.76s: Work Profile : MP4
1m 35.45s: UILog:OnMsgToolbar_Start
1m 35.46s: UILog:Msg Start : ready start
1m 35.47s: UILog:Msg Start : start test run work
1m 35.49s: UILog:right button to null, work falg = -1
1m 35.51s: UILog:Msg Start : run work
1m 35.52s: UILog:Run current Work.
1m 35.52s: UILog:Begin work Converter.
1m 35.52s: UILog:Begin work copy or converter.
1m 35.53s: Start check DVD Ripper register status.
1m 35.54s: End check DVD Ripper register status: Enable
1m 35.54s: UILog:start running at thread.
1m 35.55s: UILog:return flag at start running at thread ok.
1m 35.58s: OPList at DVD Converter : (480.2),(128.2),(32.32)
1m 35.59s: DVD Converter check watermark flag: 0
1m 39.27s: ------------------ convert work begin(1/1) ------------------
1m 39.28s: info: create config(dvd2video)
1m 39.31s: info: use profile(MP4)
1m 39.32s: info: dvd playlist(1),angle(0),chapter(1->25)
1m 39.32s: info: 3D working_mode(disable), 3D format(sbs_lef_right)
1m 39.94s: info: stream input@ Video(480)[codec(mpeg2video) size(720*480) fps(24000/1001) interlace(0) duration(0)sec opcode(compress)]
1m 40.12s: info: perset file config OK !
1m 40.12s: info: set output video frame_rate(24000/1001)
1m 40.13s: info: stream output Video(480)[codec(h264) size(720*304) fps(24000/1001) interlace(0) bitrate(788) duration(0)sec]
1m 40.13s: info: stream input@ Audio(128)[codec(ac3) channels(6) sample(48000) bitrate(448000) bitdepth(16) opcode(compress)]
1m 40.15s: info: stream output Audio(128)[codec(aac) channels(6) sample(48000) bitrate(448000) bitdepth(16) opcode(compress)]
1m 40.15s: info: SubMode(Remux) -- Display Only forced Subtitle(false)
1m 40.16s: UILog:MsgWork:WorkStatus_Start
1m 41.26s: info: h264_encode: encode param profile(1) level(30) bitrate(788) crf(-1)
51m 11.39s: read error: 3 27695 2311104 1100975 0 1 27695
57m 08.62s: read error: 3 27695 2311104 1187618 0 1 27695
58m 48.37s: read error: 3 27695 2311104 1187730 0 1 27695
59m 50.27s: info: audio_decode finish job
59m 50.34s: audio_encode finish job
59m 55.24s: ------------------ convert work finished ------------------
59m 56.64s: UILog:MsgWork:current work finish : 3
59m 56.66s: UILog:Run Work to end.

[Dora]

It seems read error during converting. Check the disc or change a drive.
You can tried clone it. Then ripped it to mp4.

[eisenb11]

It seems read error during converting. Check the disc or change a drive.
You can tried clone it. Then ripped it to mp4.

Hi Dora,

I've had this issue too and posted a thread on it. This is due to the new auto abort functionality that isn't quite working right.

The problem is that a read error occurs during the ripping then the retry/ignore/abort dialog pops up. The dialog automatically selects abort if you do nothing in 10 sec. When abort is selected, the task doesn't actually abort and continues on as if ignore was selected.

The real issue is that the abort operation doesn't work correctly.

The result is a partial rip that claims to be successful when it really was not.

This problem also occurs if you manually press the abort button instead of waiting for the 10 sec timeout.

Hope this helps.

[Dora]

When the disc read error, the results also could not well.
I will tried ingore error to saw what happens.

Thanks eisenb11

[eisenb11]

When the disc read error, the results also could not well.
I will tried ingore error to saw what happens.

Thanks eisenb11

Ignore and Abort do the same thing when the pop up window appears. What *should* happen when you press abort (or let the timeout automatically select abort) is that the task stops and is marked as failed, but this does not occur.

[Dora]

Ignore and Abort do the same thing when the pop up window appears. What *should* happen when you press abort (or let the timeout automatically select abort) is that the task stops and is marked as failed, but this does not occur.

Abort just same with ignore, we has feedback to develpor and has not fixed yet.
I understand you finally.

[eisenb11]

Abort just same with ignore, we has feedback to develpor and has not fixed yet.
I understand you finally.

Excellent! Thanks Dora!

[Dora]

Hi tiny705
We fixed some read error during converting. You can tried 9143 beta .

[eisenb11]

Hi tiny705
We fixed some read error during converting. You can tried 9143 beta .

Hi Dora,

Just tried 9143 beta and happened to run a bad disk through it. The Abort button and auto-abort functionality still do not work.

These disk errors are being caused by scratched disks, no software can fix it. That's why it's important that the abort functionality work correctly.

Currently trying to abort causes a lock up and letting auto abort go doesn't cause the process to stop and dvdfab claims that the rip was successful. The only way for me to know that it really failed is to go through the logs each time looking for failures and errors.

[Dora]

eisenb11
Some good disc occur read error during open disc or converting.
If the tiny705's disc was a scratched disks. It could not be fixed. You are right.
The abort issue has not been fixed yet.

[eisenb11]

eisenb11
Some good disc occur read error during open disc or converting.
If the tiny705's disc was a scratched disks. It could not be fixed. You are right.
The abort issue has not been fixed yet.

Ah understood, please let me know when the abort issue is fixed!

[Dora]

Ah understood, please let me know when the abort issue is fixed!

Ok i will remember that.

[ionic57]

Only partial movie(s)

Hi everyone,
I'm getting the same error, except on the Mac version (v.9.1.4.2)
Almost 120 movies in VOB_TS format do not fully Rip. We receive just a few minutes of the movie.

Work-around: For some reason Ripping each movie individually, and not in queue seems to yield better results, but it's not perfect.

Any suggestions??

Thanks!
Chris

[Dora]

Where are you got the VOB_TS files? From disc folder? Did you use converter?
Make sure the vob_ts can playable. You can also use the ripper to rip the original disc.
Post internal log with issue here.