DVDFab fails to convert video

[Matt93]

Every time I try to convert a certain video, it fails:


16:56:16: Conversion: two pass - first pass
16:56:16: DXVA GPU acceleration for video decoding enabled

16:56:49: Conversion: two pass - second pass
16:56:49: DXVA GPU acceleration for video decoding enabled

16:56:57: Work 1 failed, Error = 504.00 1 2
16:57:00: Process failed!


The specs of my video are found here:



Can anyone help me out here?

[IPopov50]

16:56:57: Work 1 failed, Error = 504.00 1 2
16:57:00: Process failed!
Can anyone help me out here?

Try to use 1-pass and let us know how it's going.

[Matt93]

1-pass immediately fails also:

19:46:20: Conversion: one pass
19:46:20: DXVA GPU acceleration for video decoding enabled

19:46:27: Work 1 failed, Error = 504.00 1 2
19:46:29: Process failed!


When doing to 2 pass, it sits there at 0% for a few seconds, then moves to the second pass at 0% and then fails. It fails after about a minute from starting it.

[Matt93]

Also, I'm trying the software option instead of DXVA and it's crawling... It's as good as not working, because the encoding fps is at 8 and consistently dropping. The roughly 2 hour movie is estimated to be done in 13 hours at the moment. So basically, it still isn't working.

EDIT: I tried the same thing on 1-pass and it failed with the same error.

EDIT 2: I tried it with CoreAVC on 2-pass and it failed halfway through. Tried it on 1 pass and it failed right at the beginning with the same error. I cannot get this to convert!

[Tiger.Wutz]

I want to convert a TS-Stream to AVI.
It is coming from a SAT receiver.

I've just used the manual like this:


It was nearly ready after 36 min for about 6 GB TS-stream but then it is still proceeding at 100 % with a running working clock.

Can anybody support this ?

[David$]

Hi Tiger.Wutz,

Have you upgraded to the latest version of DVDFab 8.0.6.8 at Please set A/V codec as software in Common settings and do 1-pass encoding to see the result.

If you still encounter the same failed error 504, we need you post your entire internal log for further checking, thanks.

[cybmole]

similar issue here - generic default 2 pass ( source has PCM/2 stereo audio)
latest v8.68 fails immediately on 1st pass
log:
09:25:17: Conversion: two pass - first pass
09:25:20: Work 1 failed, Error = 502.12 7


old version 7 works fine on same source.

[jimplasticguy]

I am having the same issue since upgrading to 8.0.6.8. Tried the beta also. Doesn't seem to matter which type of video file I try to create, but it seems to be related to audiocopy to get this error and immediate fail. I went to generic.mp4.h64.aac and it starts to rip it, but then the entire program crashes. The kicker is that I still have version 7 on my hard disc. I tried it and it rips perfectly. It has been a few days, so I was hoping a solution had been found, but it looks like it hasn't.

Jim

[awpross]

Same Problem

I have the same problem when trying to convert a video.

It's only If I use audiocopy. Re-encoding audio to aac or mp3 works. But I'd like to keep the existing audio format. Any ideas ?

[sunny]

Hi all,

Please try DVDFab 8.0.7.0 Beta at

to convert again to see the result.

Sincerely,
--
Sunny
________

[jimplasticguy]

Thank you Sunny. I just tried that. No Joy. Here is what I think is the pertinent section of the log. I appreciate your help.

0m 19.98s: create config(0)
0m 19.98s: convert profile(generic.avi.h264.audiocopy)
0m 19.98s: dvd title(1) angle(0) chapter(1->12)
0m 19.98s: stream(480,2,1) stream(160,65555,0)
0m 23.99s: info: set output video frame_rate(30000/1001)
0m 24.02s: h264 encode: using official CUDA encoder
0m 24.05s: h264_encode: encode param profile(1) level(30) bitrate(1381)
0m 24.18s: ------ mobile work failed(502.12 7) ------

Hi all,

Please try DVDFab 8.0.7.0 Beta at

to convert again to see the result.

Sincerely,
--
Sunny

[AGJ]

Need the rest of the log that you butchered as the info you cut off is needed as well

[jimplasticguy]

Attached

[AGJ]

just to let you know when pasting log all you need to post is most recent entire log for the problem try like this from your log file

DVDFab 8.0.7.2 (2011/01/23 15:04:23)

0m 00.92s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1
0m 10.67s: detected dvd
0m 10.67s: iso C:\Users\Jim\Documents\DVDFab\ISO\DIRE_STRAITS_ALC HEMY_LIVE.iso
0m 10.67s: dvd type 1
0m 10.67s: volume label DIRE_STRAITS_ALCHEMY_LIVE
0m 10.82s: got copyright 0 0
0m 10.84s: got udf/iso
0m 10.87s: got discinfo
0m 10.87s: pathplayer enabled
0m 10.90s: pathplayer loop 1 1 13 1 35524
0m 10.90s: pathplayer loop 1 1 13 1 35524
0m 10.90s: pathplayer loop 1 1 13 1 35524
0m 10.93s: got dvdinfo
0m 10.93s: opened dvd
0m 19.96s:


------ begin mobile work(1/1) ------


0m 19.98s: create config(0)
0m 19.98s: convert profile(generic.avi.h264.audiocopy)
0m 19.98s: dvd title(1) angle(0) chapter(1->12)
0m 19.98s: stream(480,2,1) stream(160,65555,0)
0m 23.99s: info: set output video frame_rate(30000/1001)
0m 24.02s: h264 encode: using official CUDA encoder
0m 24.05s: h264_encode: encode param profile(1) level(30) bitrate(1381)
0m 24.18s: ------ mobile work failed(502.12 7) ------

This may be a problem with the music DVD as another member have similar problem with Dire Straits DVD as well but why not give a try with your A/V Codec set as software for all choices instead of Cuda being selected

[jimplasticguy]

Thanks. I think you have the right track going. I just set to software on all. Tried Alchemy again and it failed. I then tried an RATM DVD which is also music, but it seems to be ripping.

Some additional info on the Dire Straits one is that it was made in Germany and is Region Zero. The first one I received as a gift could not be read by any DVD player. I did a return and the second one also had problems. I looked at it and it was incredibly dirty, even though it was just removed from shrink wrap. I cleaned and it was readable. Not sure how much any of this helps as I am not a DVD expert, but it was definitely not great quality.

Thanks again.

Jim