Announcement
Collapse
No announcement yet.
UHD Drive models
Collapse
This topic is closed.
X
X
-
This thread is closed, please see this one https://forum.dvdfab.cn/forum/uhd-co...-faqs-and-info for the latest information and drives list, along with info on the DVDFab UHD Drive Tool..
-
Originally posted by pacman View Post
if you check the drives listed in the supported drives list it shows thatLG BP60NB10 needs firmware GH01 to be compatible. you have purchased a drive with firmware 1.0. if you asked when purchasing for the firmware you wanted and was supplied with something different then you would have a case for getting a refund from newegg. If you had not asked for the correct firmware as described on dvdfab website then you only have yourself to blame . there is no need to be peeved with dvdfab
I was upset because I asked a simple question: if DVDFab confirmed the LG BP60NB10 actually worked and if it actually had firmware GH01. All I got was to just return the drive. There is another post here asking the same question as well. I knew if I bought a drive with different firmware I may have to upgrade/downgrade the proper firmware, but we looked everywhere for GH01 firmware it appears it doesn't exist, hence the simple question to DVDFab.
Leave a comment:
-
Originally posted by rragpaoa View Post
Again ... it says on YOUR webpage on YOUR supported list. Either take it out or update it!
I'm a little peeved since I bought the drive based on your list, and Newegg will NOT refund it!LG BP60NB10 needs firmware GH01 to be compatible. you have purchased a drive with firmware 1.0. if you asked when purchasing for the firmware you wanted and was supplied with something different then you would have a case for getting a refund from newegg. If you had not asked for the correct firmware as described on dvdfab website then you only have yourself to blame . there is no need to be peeved with dvdfab
Leave a comment:
-
Originally posted by rragpaoa View Post
Again ... it says on YOUR webpage on YOUR supported list. Either take it out or update it!
I'm a little peeved since I bought the drive based on your list, and Newegg will NOT refund it!
and are you running the 64bit version of dvdfab.
also you might want to post the dvdfab internal log files
for the developers to check for issues.Last edited by october262; 10-13-2018, 01:25 AM.
Leave a comment:
-
Originally posted by signals View PostIf you would prefer a drive that has been tested with DVDFab, send it back for a refund and get one of these: https://forum.dvdfab.cn/forum/uhd-co...ives-avaliable You will need an external dock unless you want to install it internally. I have no idea if firmware GH01=firmware 1.0.
Again ... it says on YOUR webpage on YOUR supported list. Either take it out or update it!
I'm a little peeved since I bought the drive based on your list, and Newegg will NOT refund it!
Leave a comment:
-
Hi all,
Please tell me the details of the drive if DeUHD support but DVDFab not, you can find it from DVDFab - Common Settings - Drives. See the attach pic.
Thanks!
Wilson
Leave a comment:
-
If you would prefer a drive that has been tested with DVDFab, send it back for a refund and get one of these: https://forum.dvdfab.cn/forum/uhd-co...ives-avaliable You will need an external dock unless you want to install it internally. I have no idea if firmware GH01=firmware 1.0.
Leave a comment:
-
Originally posted by october262 View Post
see here - https://www.dvdfab.cn/4k-uhd-drives....ID=productpage if you try updating the firmware then the UHD copy feature will not work.
try right clicking your dvd drive - click properties- Hardware, the firmware should show
So, with that, I just want to make sure that it has been confirmed that the LG BP60NB10 does indeed work with DVDFab, and if so, where can we get the firmware?
Leave a comment:
-
Originally posted by rragpaoa View Post
I also have the same LG LG BP60NB10 model external drive. It's listed here as an 'Approved Drive' with firmware GH01. I also have firmware ver 1.0. I looked everywhere for firmware GH01. Can any of the DVDFab engineer here confirm the drive if it truly works, and to where to get firmware GH01?
try right clicking your dvd drive - click properties- Hardware, the firmware should show
Leave a comment:
-
Originally posted by Prot_not_Prot View PostI have an LG BP60NB10 model external drive (I know, it's USB 2.0), but DVD Fab says it not supported. The reply from DVD Fab support was to verify the firmware. I have version 1.0, but I can not find anywhere online a firmware update to this model.
Can anyone assist?
I also have the same LG LG BP60NB10 model external drive. It's listed here as an 'Approved Drive' with firmware GH01. I also have firmware ver 1.0. I looked everywhere for firmware GH01. Can any of the DVDFab engineer here confirm the drive if it truly works, and to where to get firmware GH01?
Leave a comment:
-
I have an LG BP60NB10 model external drive (I know, it's USB 2.0), but DVD Fab says it not supported. The reply from DVD Fab support was to verify the firmware. I have version 1.0, but I can not find anywhere online a firmware update to this model.
Can anyone assist?
Leave a comment:
-
Originally posted by GomezAddams View PostDeUHD works fine on all three drives I bought that were listed on the good lists for DVDFab. all of them have a newer BIOS on them.. and they work on DeUHD... I guess it is time to dump DVDFab and move onto DeUHD and use make mkv to rip movie only after ripping to hard drive with DeUHD. It was great while it lasted.
Leave a comment:
-
DeUHD works fine on all three drives I bought that were listed on the good lists for DVDFab. all of them have a newer BIOS on them.. and they work on DeUHD... I guess it is time to dump DVDFab and move onto DeUHD and use make mkv to rip movie only after ripping to hard drive with DeUHD. It was great while it lasted.
Leave a comment:
-
Originally posted by jgibo1 View Post
I just checked and it shows BU11 instead of the preferred BU10. I tried downloading the older firmware but get the message I have the latest. (translation from Japanese I think)
since I had nothing to do I downloaded the data to my pc then made an iso with dvdfab just to see if it would work. It did but didn't show me audio options.
downgrade then I would suggest you
Get a refund and try your luck with a different drive.
Leave a comment:
-
Originally posted by october262 View Post
what firmware does your drive have ?? and see here - https://www.dvdfab.cn/4k-uhd-drives....ID=productpage
since I had nothing to do I downloaded the data to my pc then made an iso with dvdfab just to see if it would work. It did but didn't show me audio options.
Leave a comment:
Leave a comment: