We are still experiencing DRM issues with some of the StreamFab download modules. If you can only download videos at lower resolutions than you could before January 25th 2024, please be patient as the developers are still working on fixing the issues.
Other symptoms that you are dealing with a DRM problem could be "Failure to access video" errors or endless analysis.
Please refrain from posting about these specific errors as we are of course well aware and working on them. Feel free to post an issue you think might not be related to the DRM problem but bear in mind that they will be treated with a very low priority until the DRM issues are resolved.
The following modules should be fully back to normal (state before January 25th 2024):
AbemaTVApple TV+CrunchyrollDisney+HuluITVX
JoynLeminoNHK+OnlyFansParamount+
RTL+ShahidTubiU-Next
These modules are back to normal for content added prior to January 25th 2024 and lower resolutions for newer content:
AmazonMax
* Netflix content added after January 25th 2024 cannot be downloaded at all. It is back to normal for everything else.
Regarding Peacock , the content that cannot be downloaded is anything posted after February 22nd 2024. Anything Prior can still be downloaded as usual.
Amazon
SteamFab 6.1.6.9 Still Re-Encoding 720p To 1080p
With StreamFab, I have been downloading in both 720p and 1080p modes. Using StreamFab 6.1.6.8, I noticed that the 1080p downloads seemingly worked fine, but the 720p videos were re-encoded to 1080p. The release notes for StreamFab 6.1.6.9 did not mention fixing this, but I went ahead and installed the update anyway. The re-encoding still happens for 720p videos, so until the next update, I continue to hope. Thanks.
but the 720p videos were re-encoded to 1080p
.. I noticed the re-encoding from 720p to 1080 since StreamFab 6.1.6.7
That wasn't the case for me in three out of three cases (with 6169).
And with 6168 that also never happened to me either.
I used 720p by default for Amazon.
Can you add a StreamFab.log in which it behaved like this.
Did they change the reencoding in the new test version 6.1.6.9 Test?
Just downloaded H268 HD 3.16 GB (3.81 download size) 4189kbps. It was re-encoded to H246 and a file size of 3.88GB and av. Bitrate is over 5300kbps and 1080p as the source file.
In the past the file size seemed much smaller and much lower bit rate.
I will try later an with 6168 re-encoded movie, to compare bitrate.
You don't need to. I tried with something else, and the outcome in size is exactly the same between 6.1.6.9 and 6.1.6.9Test.
I guess I was comparing the recent download where I explicitly chose H264 max. bit rate to the same movie I probably had choosen H265 and such came in lower bitrate and possibly because of this resulted in a much lower file size. Don't know if SF possibly takes the source bit rate for re-encode or what their settings are.
just tried this theory. Screenshot shows the output. 1st line I chose H265 max. bitrate, 2nd line I chose H264 max. bitrate as source
resulting bit rate just about 2000kbps when choosing H265. Both re-encoded files are H264
I can't see any difference in UI or Log.
I will try later an with 6168 re-encoded movie, to compare bitrate.
Re-Encoded can be lower or higher in Bitrate - it depends from source, that's normal.
If I recall correctly,,Wilson once said he'd ask the developers to look into complaints that re-encoded titles "stuttered". I think you said this happens for titles longer than 40 minutes. I doubt that's been fixed, or it would be mentioned in the change log, but it might be something to watch for since you're comparing.
If I recall correctly,,Wilson once said he'd ask the developers to look into complaints that re-encoded titles "stuttered". I think you said this happens for titles longer than 40 minutes. I doubt that's been fixed, or it would be mentioned in the change log, but it might be something to watch for since you're comparing.
I think that had to do with HDCP compatibility and some dual-monitor which was connected. Don't think it was a bug
Is there a trick to get 6.1.6.9 to actually work on Amazon? Everything I have tried to record downloads the movie and then fails on the last bit of processing. Dark Harvest, Marlowe, Dead Snow 2: Red vs Dead for example.
Is there a trick to get 6.1.6.9 to actually work on Amazon? Everything I have tried to record downloads the movie and then fails on the last bit of processing. Dark Harvest, Marlowe, Dead Snow 2: Red vs Dead for example.
Dead Snow 2 is not available at Amazon.de (without HoH Channel)
Dark Harvest (Die Dunkle Saat) + Marlowe
works for me without re-encoding or "trick"
What is your selection?
For more infos StreamFab.log needed
That wasn't the case for me in three out of three cases (with 6169).
And with 6168 that also never happened to me either.
I used 720p by default for Amazon.
Can you add a StreamFab.log in which it behaved like this.
I noticed in one of your posts, on Auber Kontrolle, Die Dunkle Saat, Marlowe, the correct bitrate was displayed at 720p. I was downloading from Amazon US and it showed right after the analysis at 1080p although StreamFab VIP Services was set to 720p in both General and Amazon settings, plus CBR and AAC. After remuxing, I get the message saying that the videos were re-encoded to a higher quality at 1080p. Thanks.
Dead Snow 2 is not available at Amazon.de (without HoH Channel)
Dark Harvest (Die Dunkle Saat) + Marlowe
works for me without re-encoding or "trick"
What is your selection?
For more infos StreamFab.log needed
Just using what the defaults are. I have tried a few other lower settings with no luck also.
Any reason this web site logs me out after 30 seconds so I have to keep logging back in?
Hi, Germania. Yes, I have 5 [Critical] entries in the StreamFab.log which I sent you in a private message, plus the download report. Thanks for your help.
Comment