No Media detected

Update to V 8095
If still having problems start a new thread with v8095 listed.

[nwkwang9]

Just a heads up the got copyright 0 0 from the internal log file does not mean it a movie that been decrypted already and does not mean it a pirated copy. I can pull 5 of my movie logs that show got copyright 0 0 in my logs and probably more but I not going to go through all of them

For those having this no media problem I do not use Blu-ray blank media but have not had this issue with my DVD blank media and I tried them all. I only use Taiyo Yuden and Verbatim but gave my cheap media a try and they was all detected.

I have TDK, Imation, Sony, HP, Dynex, Staples, Memorex, Maxell and I even tried my China made Verbatim and they was all detected. I have more but I figured the ones I tried was enough to know it not DVDFab issue for this problem

Have you checked to make sure the firmware is up to date for the drives that giving problems? Have you tried uninstalling the DVD drives from Device Manager and restart to let windows install them again?

Thanks for the response. I do not have issue with the dvd blank media with dvd copy. I have tried many times and have issues with the blu-ray memorax copies only. I have no problem when I reverted to the old version of DVDFab 8.0.8.5. All my drivers are up to date, and I recently got a new LG burner. Maybe the LG is incompatible with the blu-ray media in the new version.

[AGJ]

Just a heads up the got copyright 0 0 from the internal log file does not mean it a movie that been decrypted already and does not mean it a pirated copy. I can pull 5 of my movie logs that show got copyright 0 0 in my logs and probably more but I not going to go through all of them

For those having this no media problem I do not use Blu-ray blank media but have not had this issue with my DVD blank media and I tried them all. I only use Taiyo Yuden and Verbatim but gave my cheap media a try and they was all detected.

I have TDK, Imation, Sony, HP, Dynex, Staples, Memorex, Maxell and I even tried my China made Verbatim and they was all detected. I have more but I figured the ones I tried was enough to know it not DVDFab issue for this problem

Have you checked to make sure the firmware is up to date for the drives that giving problems? Have you tried uninstalling the DVD drives from Device Manager and restart to let windows install them again?

[nwkwang9]

I am having the same issue. I have been using the same media disc's as always & never had this problem. When I downloaded the newest software version that is when I started to having this problem. I would guess that it's a glitch in the new software. I hope that the developers fix it asap since it seems we are all having the same problem

I agreed with FFEMTP22. The new software 8.0.9.2 Qt does not work for the blu-ray copy too. No media is detected. I have to revert to version 8.0.8.5 to have it worked

[IPopov50]

Hi newey
Something is strange about your last log 0m 36.51s: got copyright 0 0
This indicates that this disc has no copy-write (which is impossible) or that this is a backup copy that you are using.
CBR929

.... Or you have purchased a pirated copy

[CBR929]

Hi newey
Something is strange about your last log 0m 36.51s: got copyright 0 0
This indicates that this disc has no copy-write (which is impossible) or that this is a backup copy that you are using.
CBR929

[newey]

confirm, English is selected, just tried my sons Elmo DVD, same issue, won't start the burn process after the read.
See logs

DVDFab 8.0.9.2 (2011/05/28 12:09:54)

0m 01.75s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1
0m 01.75s: Qt Translator file load success
0m 29.04s: detected dvd
0m 29.10s: drive E
0m 29.10s: dvd type 1
0m 29.10s: volume label THE_STREET_WE_LIVE_ON
0m 36.51s: got copyright 0 0
0m 36.54s: got udf/iso
0m 37.93s: got discinfo
0m 37.93s: pathplayer enabled
0m 51.57s: got dvdinfo
0m 51.75s: opened dvd
7m 28.32s: detected dvd
7m 28.39s: drive E
7m 28.39s: dvd type 0
7m 28.39s: volume label


DVDFab 8.0.9.2 (2011/05/28 12:18:50)

0m 03.18s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1
0m 03.21s: Qt Translator file load success

[CBR929]

Language is English, don't see an issue here, thanks though

Hi newey
As suggested by Gummigutta are you sure that English is selected Please see this post for this error 0m 02.89s: Qt Translator file load failed, the *.qm path is C:\PROGRA~1\DVDFAB~2\QLanguage\DVDFabQt_.qm

I would also stay clear of the DVD-5 RITEKF1 they are considered garbage so stick with the Verbatim you are using.

You are also correct, you can not set DMA on a SATA Drive.

CBR929

[newey]

CBR929, DVD writer was selected, thanks though

[newey]

Language is English, don't see an issue here, thanks though

[Gummigutta]

0m 01.76s: C:\PROGRA~1\DVDFAB~2\QLanguage\DVDFabQt_.qm 0m 01.76s:
0m 01.76s: Qt Translator file load failed, the *.qm path is C:\PROGRA~1\DVDFAB~2\QLanguage\DVDFabQt_.qm

Check the selected language in the settings.

[hugaby]

No media detected

I also am having the no media detected and Ive always used IMAG Burn. Doesnt matter what drive. Im having to rescan and load for each copy I make. I even tried on Beta, and tried disabling pathplayer. Did we get an answer to this problem Thanks guys

[newey]

sorry guys, I have been busy at the office, no time to play on the pc.
My burner is the LG BH10LS30
Blank media I use DVD-5 RITEKF1, Verbatim MCC 03RG20, DVD-9 Verbatim MKM-001-00, BD25 RITEK-BR2-000.
Darth, I have SATA drives, I don't think you can set DMA on a SATA, let me know if you are aware of an option to do this.
I switched to IMGBURN from VSO, no luck, I had one work, see 'Sharpay's...'
Thanks everyone for all your help.
I am attaching logs from VSO looks like IMGburn log only shows my successful Sharpay burn, not the others that did not work.

2011-05-23 13:02:02 ---- ******************** Log session stop 23-May 13:02:02.906 PID 3592********************
2011-05-23 13:01:48 Info Current Drive selected : 0:2:0 - HL-DT-ST BD-RE BH10LS30 1.00 [E] (Ide)
2011-05-23 13:01:48 Info Using Advanced SPTI interface
2011-05-23 13:01:48 Info System default language : English (United States)
2011-05-23 13:01:48 Info User default language : English (United States)
2011-05-23 13:01:48 Info DLL Version : 4.0.16.484
2011-05-23 13:01:48 Info DLL : C:\Program Files\DVDFab 8 Qt\vso_hwe.dll
2011-05-23 13:01:48 Info Version : 8, 0, 9, 2
2011-05-23 13:01:48 Info ExeName : C:\Program Files\DVDFab 8 Qt\DVDFab.exe
2011-05-23 13:01:48 Info OS : Microsoft Windows XP MCE 2005 (Build 2600: Service Pack 3)
2011-05-23 13:01:48 ---- ******************** Log session start 23-May 13:01:48.203 PID 3592********************

DVDFab 8.0.9.2 (2011/05/23 13:29:06)

0m 02.84s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1
0m 02.89s: 2
0m 02.89s: C:\PROGRA~1\DVDFAB~2\QLanguage\DVDFabQt_.qm 0m 02.89s:
0m 02.89s: Qt Translator file load failed, the *.qm path is C:\PROGRA~1\DVDFAB~2\QLanguage\DVDFabQt_.qm
0m 08.43s: detected dvd
0m 08.45s: drive E
0m 08.45s: dvd type 0
0m 08.45s: volume label
0m 27.62s: pathplayer enabled


DVDFab 8.0.9.2 (2011/05/23 13:42:59)

0m 03.37s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1
0m 03.39s: 2
0m 03.39s: C:\PROGRA~1\DVDFAB~2\QLanguage\DVDFabQt_.qm 0m 03.39s:
0m 03.39s: Qt Translator file load failed, the *.qm path is C:\PROGRA~1\DVDFAB~2\QLanguage\DVDFabQt_.qm


DVDFab 8.0.9.2 (2011/05/23 13:44:32)

0m 01.67s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1
0m 01.67s: 2
0m 01.67s: C:\PROGRA~1\DVDFAB~2\QLanguage\DVDFabQt_.qm 0m 01.67s:
0m 01.67s: Qt Translator file load failed, the *.qm path is C:\PROGRA~1\DVDFAB~2\QLanguage\DVDFabQt_.qm

DVDFab 8.0.9.2 (2011/05/23 17:54:58)

0m 02.57s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1
0m 02.60s: 2
0m 02.60s: C:\PROGRA~1\DVDFAB~2\QLanguage\DVDFabQt_.qm 0m 02.60s:
0m 02.60s: Qt Translator file load failed, the *.qm path is C:\PROGRA~1\DVDFAB~2\QLanguage\DVDFabQt_.qm
0m 08.60s: detected dvd
0m 08.60s: drive E
0m 08.60s: dvd type 0
0m 08.60s: volume label
0m 24.03s: pathplayer enabled


DVDFab 8.0.9.2 (2011/05/23 18:19:59)

0m 01.76s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1
0m 01.76s: 2
0m 01.76s: C:\PROGRA~1\DVDFAB~2\QLanguage\DVDFabQt_.qm 0m 01.76s:
0m 01.76s: Qt Translator file load failed, the *.qm path is C:\PROGRA~1\DVDFAB~2\QLanguage\DVDFabQt_.qm
1m 23.03s: detected dvd
1m 23.09s: drive E
1m 23.09s: dvd type 1
1m 23.09s: volume label SharpaysFabulousAdventure_USA_DE
1m 33.46s: got copyright 1 f6
1m 33.75s: got udf/iso
1m 38.01s: got discinfo
1m 38.03s: pathplayer enabled
2m 18.64s: got dvdinfo
2m 18.78s: opened dvd
12m 35.32s: detected dvd
12m 35.35s: drive E
12m 35.35s: dvd type 0
12m 35.35s: volume label

[FFEMTP22]

I am having the same issue. I have been using the same media disc's as always & never had this problem. When I downloaded the newest software version that is when I started to having this problem. I would guess that it's a glitch in the new software. I hope that the developers fix it asap since it seems we are all having the same problem

[DarthCopier]

I'm having the same problem. I've used the same dvd's I always use to copy with and It keeps saying no media is detected. I just recently downloaded the new software as well.

Hail, Terb14! (and rtbe25)

Same question to you as was given to newey (which he hasn't answered yet...).... What media are you using and what drive is installed as your write drive??

And is DMA set or not??

DC