Cannot get a single BluRay to Copy

[hsolo05]

I downloaded DVD Fab and I have been trying for a week now to get a BluRay DVD to rip for my iPhone. It is the only function I need and I am more than willing to pay the 60 bucks.......but I need to know it works

I feel I may be doing something stupid here, after all that tends to be my nature.

Any help would be appreciated

My computer is as follows

HP Pavilion dv6 Notebook
Processor - Intel Core i7-2630QM CPU @2.00 GHz
RAM - 8.00
64 Bit OS


The log copied below

DVDFab 8.1.0.5 (2011/07/28 07:59:05)

0m 00.85s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1
0m 00.85s: Qt Translator file load success
0m 55.49s: detected blu-ray
0m 55.49s: drive E
0m 55.49s: blu-ray type 1
0m 55.49s: volume label RCSW III
1m 05.58s: root 03471DC1 RCSW III:RCSW III:RCSW III:RCSW III
1m 06.33s: aacs 1 bd+ 0
1m 17.97s: got discinfo
1m 28.09s: got bdmv
1m 28.09s: Vendor: hp
1m 28.11s: Product: DVDWBD TS-LB23L
1m 28.11s: Revision: 0600
1m 28.11s: Vendor specific: 1228 OB217415
1m 28.11s: AACS version: 1
1m 28.11s: Number of concurrent AGIDs: 2
1m 28.11s: Supports bus encryption: NO
1m 28.11s: Supports binding nonce generation: NO
1m 28.11s: Supports Hybrid discs: NO
1m 28.11s: got agid 0
1m 28.17s: sent host cert chal
1m 28.18s: got drive cert chal
1m 28.18s: BEC 0
1m 28.18s: DRIVE_VENDOR 0x0386
1m 28.26s: got drive key
1m 28.57s: got host key signature
1m 28.57s: verified drive signature
1m 28.57s: verified host signature
1m 28.65s: sent host signature and key point
1m 28.65s: got bus key
1m 28.65s: got agid 0
1m 28.73s: sent host cert chal
1m 28.73s: got drive cert chal
1m 28.73s: BEC 0
1m 28.73s: DRIVE_VENDOR 0x0386
1m 28.81s: got drive key
1m 28.81s: got host key signature
1m 28.82s: verified drive signature
1m 28.82s: verified host signature
1m 28.90s: sent host signature and key point
1m 28.90s: got bus key
1m 29.70s: got volume id
1m 29.70s: got volume id mac
1m 29.70s: volume id is correct
1m 29.71s: got vid
1m 29.96s: blu-ray BE67A356963496E763E0DDD765456CAF11E854E4
1m 30.57s: cert BEE=0x80
1m 30.85s: D 7FE0F1D9
1m 30.87s: got vuk
1m 30.94s: got unit key 1
2m 26.86s: got extended bdinfo
2m 26.86s: opened blu-ray
4m 38.71s:


------ begin mobile work(1/1) ------


4m 38.71s: create config(5)
4m 38.71s: convert profile(xbox360.wmv.wma10)
4m 38.71s: blu-ray playlist(110) angle(0) chapter(1->7)
4m 38.71s: stream(4113,VC-1,1) stream(4352,TrueHD,1) stream(4608,PGS,4)
4m 38.72s: info: set output video frame_rate(30000/1001)
4m 38.74s: subpicture preset(1), mode(0)
4m 38.74s: processing source(00008.m2ts)
4m 38.75s: try to use gpu acceleration(2) for video decoding
4m 38.75s: using dmo decoder
4m 39.00s: subpicture(4608) mode(0)
4m 39.00s: connect to sub render filter
7m 42.10s: error: process exception, filter(type1:id22), info = 503.00 13,
7m 45.36s: ------ mobile work failed(504.00 0 error: process exception, filter(type1:id22), info = 503.00 13,

) ------
22m 38.50s: detected blu-ray
22m 38.50s: drive E
22m 38.50s: blu-ray type 1
22m 38.50s: volume label THE DARK KNIGHT


DVDFab 8.1.0.5 (2011/07/28 08:22:18)

0m 00.84s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1
0m 00.84s: Qt Translator file load success
0m 09.18s: detected blu-ray
0m 09.18s: drive E
0m 09.18s: blu-ray type 1
0m 09.18s: volume label THE DARK KNIGHT
0m 12.35s: root 0459D007 THE DARK KNIGHT:THE DARK KNIGHT:THE DARK KNIGHT:THE DARK KNIGHT
0m 13.07s: aacs 1 bd+ 0
0m 14.04s: got discinfo
0m 14.39s: got bdmv
0m 14.39s: Vendor: hp
0m 14.41s: Product: DVDWBD TS-LB23L
0m 14.41s: Revision: 0600
0m 14.41s: Vendor specific: 1228 OB217415
0m 14.41s: AACS version: 1
0m 14.41s: Number of concurrent AGIDs: 2
0m 14.41s: Supports bus encryption: NO
0m 14.41s: Supports binding nonce generation: NO
0m 14.41s: Supports Hybrid discs: NO
0m 14.41s: got agid 0
0m 14.47s: sent host cert chal
0m 14.49s: got drive cert chal
0m 14.49s: BEC 0
0m 14.49s: DRIVE_VENDOR 0x0386
0m 14.57s: got drive key
0m 14.86s: got host key signature
0m 14.86s: verified drive signature
0m 14.86s: verified host signature
0m 14.94s: sent host signature and key point
0m 14.94s: got bus key
0m 14.96s: got agid 0
0m 15.02s: sent host cert chal
0m 15.02s: got drive cert chal
0m 15.03s: BEC 0
0m 15.03s: DRIVE_VENDOR 0x0386
0m 15.11s: got drive key
0m 15.11s: got host key signature
0m 15.11s: verified drive signature
0m 15.11s: verified host signature
0m 15.19s: sent host signature and key point
0m 15.19s: got bus key
0m 19.29s: got volume id
0m 19.29s: got volume id mac
0m 19.29s: volume id is correct
0m 19.32s: got vid
0m 19.48s: blu-ray E83AB5BDDB0A0C4F295F886436ECE1069761A0E7
0m 20.01s: cert BEE=0x00 same
0m 20.23s: D 4D172E4A
0m 20.24s: got vuk
0m 20.48s: got unit key 1
0m 24.63s: got extended bdinfo
0m 24.63s: opened blu-ray
1m 28.07s:


------ begin mobile work(1/1) ------


1m 28.07s: create config(5)
1m 28.07s: convert profile(iPhone4.mp4)
1m 28.07s: blu-ray playlist(100) angle(0) chapter(1->40)
1m 28.07s: stream(4113,VC-1,1) stream(4353,TrueHD,1) stream(4608,PGS,4)
1m 54.36s:


------ begin mobile work(1/1) ------


1m 54.36s: create config(5)
1m 54.36s: convert profile(iPhone4.mp4)
1m 54.36s: blu-ray playlist(100) angle(0) chapter(1->40)
1m 54.36s: stream(4113,VC-1,1) stream(4353,TrueHD,1) stream(4608,PGS,4)
2m 20.36s:


------ begin mobile work(1/1) ------


2m 20.36s: create config(5)
2m 20.36s: convert profile(iPhone4.mp4)
2m 20.36s: blu-ray playlist(100) angle(0) chapter(1->40)
2m 20.36s: stream(4113,VC-1,1) stream(4353,TrueHD,1) stream(4608,PGS,4)
2m 20.38s: not set correct fourcc for video(28)
2m 20.38s: info: set output video frame_rate(24000/1001)
2m 20.40s: subpicture preset(1), mode(0)
2m 20.40s: processing source(00007.m2ts)
2m 20.40s: try to use gpu acceleration(2) for video decoding
2m 20.40s: DXVA GPU acceleration for video decoding enabled
2m 20.40s: Intel GPU acceleration for video encoding enabled
2m 20.46s: h264_encode: encode param profile(1) level(31) bitrate(1864)
2m 20.65s: subpicture(4608) mode(0)
2m 20.65s: connect to sub render filter


DVDFab 8.1.0.5 (2011/07/28 09:16:09)

0m 00.88s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1
0m 00.88s: Qt Translator file load success
0m 09.46s: detected blu-ray
0m 09.46s: drive E
0m 09.46s: blu-ray type 1
0m 09.46s: volume label TRON_LEGACY
0m 12.68s: root 8CD90E9EBB264902_VOLUME_SET_ID:TRON_LEGACY:TRON_LE GACY:TRON_LEGACY
0m 13.71s: aacs 1 bd+ 0
0m 15.17s: got discinfo
0m 15.31s: got bdmv
0m 15.33s: Vendor: hp
0m 15.33s: Product: DVDWBD TS-LB23L
0m 15.33s: Revision: 0600
0m 15.33s: Vendor specific: 1228 OB217415
0m 15.33s: AACS version: 1
0m 15.33s: Number of concurrent AGIDs: 2
0m 15.33s: Supports bus encryption: NO
0m 15.33s: Supports binding nonce generation: NO
0m 15.33s: Supports Hybrid discs: NO
0m 15.33s: got agid 0
0m 15.39s: sent host cert chal
0m 15.41s: got drive cert chal
0m 15.41s: BEC 0
0m 15.41s: DRIVE_VENDOR 0x0386
0m 15.49s: got drive key
0m 15.74s: got host key signature
0m 15.74s: verified drive signature
0m 15.74s: verified host signature
0m 15.83s: sent host signature and key point
0m 15.83s: got bus key
0m 15.83s: got agid 0
0m 15.89s: sent host cert chal
0m 15.91s: got drive cert chal
0m 15.91s: BEC 0
0m 15.91s: DRIVE_VENDOR 0x0386
0m 15.99s: got drive key
0m 15.99s: got host key signature
0m 15.99s: verified drive signature
0m 15.99s: verified host signature
0m 16.06s: sent host signature and key point
0m 16.06s: got bus key
0m 20.20s: got volume id
0m 20.20s: got volume id mac
0m 20.20s: volume id is correct
0m 20.21s: got vid
0m 20.38s: blu-ray C3EED8D0AEEF184DD04C53D96BEEA548B9A4955C
0m 20.92s: cert BEE=0x00 same
0m 21.18s: D 86E8E85F
0m 21.20s: got vuk
0m 21.49s: got unit key 1
0m 42.10s: got extended bdinfo
0m 42.10s: opened blu-ray
5m 31.39s:


------ begin mobile work(1/1) ------


5m 31.39s: create config(5)
5m 31.39s: convert profile(iPhone4.mp4)
5m 31.40s: blu-ray playlist(800) angle(0) chapter(1->21)
5m 31.40s: stream(4113,AVC,1) stream(4352,DTS-HD MA,1) stream(4608,PGS,4)
5m 31.40s: not set correct fourcc for video(28)
5m 31.40s: info: set output video frame_rate(24000/1001)
5m 31.40s: subpicture preset(1), mode(0)
5m 31.42s: processing source(00005.m2ts)
5m 31.42s: try to use gpu acceleration(5) for video decoding
5m 31.42s: Intel GPU acceleration for video decoding enabled
5m 31.45s: Intel GPU acceleration for video encoding enabled
5m 31.45s: h264_encode: encode param profile(1) level(31) bitrate(1864)
5m 31.59s: subpicture(4608) mode(0)
5m 31.59s: connect to sub render filter


this is what the screen looks like

[hsolo05]

Also I am using run as administrator. I also uninstalled, used CCleaner and re-installed as administrator to be sure

[CBR929]

Hi hsolo05

Please do not convert from your drive
First save it to your HDD as "Movie Only" BD50 without compression.
Then open the hard drive folder and use the folder on your HDD to do your converting.
Doing it this way saves wear and tear on your optical drive and is also faster.

You may also try using the software option, to do this Open Fab click the Click the Green √ at top right corner of the DVDFab screen, and open Common Settings > General >A/V Codec, put a check in Disable all GPU codes, and also uncheck Enable Lightning-Recoding set Video Decoder to Software and set Video Encoder to Software restart Fab and try again.
Hope this helps
CBR929

[IPopov50]

@hsolo05
I totally agree with my friend CBR929 in regards to ripping your movie to HDD first. It's an essential step.
CBR929 also gave you an option to process your content without GPU acceleration. Considering your powerful processor, it shoul do the trick for you in fairly short time.
However, you might want to experiment with GPU acceleration and try to make it work. BTW, root of your problem seems in GPU acceleration settings.
From your screenshot I can see that DVDFab recognized IQS on your machine ant trying to engage it in transcoding process, unfortunately unsuccessful.
What I would suggest you to is to:
(a) make sure that DVDFab is added to the games list in Virtu Control Panel
(b) make sure you using 1-pass process instead of 2-pass.
Try to process again. If unsuccessful, go back to "Software" settings for A/V Codec.

[hsolo05]

Cant thank you guys enough! I changed the GPU you settings and it worked.

Thank you very much for the help

Sean

[CBR929]

Hi hsolo05
Glad it is working for you now.
CBR929

[Akrylyk]

Video Graphics and Firmware

Cant thank you guys enough! I changed the GPU you settings and it worked.

Thank you very much for the help

Sean

I have noted a problem with some Motherboards not being up to date because a more current firmware from places such as ASUS and MSI have new features to allow Blu-Ray drives on the MOBO. Without this update some motherboards will see the drive but still treat it as a DVD. on a second note the firmware of each DVD-BD drive should be updated as well. And the last thing is the Video Card to the most current driver (Not found on Windows Update but from the direct manufatuerer) The GPU settings in DVD Fab work well as long as the drivers are all up to date. I am running several systems as a testbed to see how low and slow I can go and still be successful. So far this is the common problem (not updating GPU driver) and one that doesn't seem to be mentioned by moderators is the MOBO drivers (BIOS) which in ASUS based systems is especially difficult when it doesnt want to work. Also I tested the Blu_ray Burner on a Intel Atom 1.6Ghz with 1GB of ram winXPPro and it worked fine. Took a few hours but it still worked.