RED 2 Unplayable

[BeckyW]

BECKYW: Did you check don't record any subtitles in Fabs settings as the screen shot below shows? If you do it from main movie you have to uncheck the subtitles from each disk.

Regardless of this your player has settings to turn off subtitles and pick between them if theirs more than one.You don't have to do this from the dvd menu.

Displaying settings on the remote control of your player should bring up the on screen settings to adjust subtitles audio track etc.I never seen a hardware or soft wear player without them.

If you had a rewritable disk so you don't waste blanks I would of told you to try making the full disk by turning off pathfinder for this disk and try again.Also sometimes burning a ISO as I told you before works when full disk doesn't.

Did this and hit okay then closed the program because it said you must reopen Fab for settings to take effect reopened it burned main movie still subtitles in it, Fab did not save the changes tried this 3 times it is not saving my changes they are going directly back to default as soonas I close the program and reopen it,its like I never did it.

[BeckyW]

BECKYW: Did you check don't record any subtitles in Fabs settings as the screen shot below shows? If you do it from main movie you have to uncheck the subtitles from each disk.

Regardless of this your player has settings to turn off subtitles and pick between them if theirs more than one.You don't have to do this from the dvd menu.

Displaying settings on the remote control of your player should bring up the on screen settings to adjust subtitles audio track etc.I never seen a hardware or soft wear player without them.

If you had a rewritable disk so you don't waste blanks I would of told you to try making the full disk by turning off pathfinder for this disk and try again.Also sometimes burning a ISO as I told you before works when full disk doesn't.

Okay I know my player has settings to turn off subtitles but it is does not work on this movie, the feature is unclickable. on my DVD player with the back up copy. The player in my computer is the same not clickable to turn off subs its like it is missing the part that makes the button or link for that feature work.I use Power DVD player in my computer and it is the latest version of that.I have a Sony surround sound DVD player connected to my TV that is only about 6 months old.So I do ont know what else to try with this movie, I have given up it is stressing me out trying to figure out wht the issue is with this. Like I mentioned I had the latest version of FAB the one right before this new version popped up Dec 17th and I updated it, and I was not having any problem with the last version at all. I even backed up movies others were saying they couldn't get then I updated to this one and now I am having all sorts of issues with this version.

[BeckyW]

Beckyw: After you change the subtitles to select no subtitles in Fab settings you must click ok and close Fab when you reopen Fab the settings will take effect.

Fab use to have a pop up box telling you this but it seems it was left out of the current version 9.

I have tested main movie with and without subtitles and it works fine for me.

Okay I did this as you instructed I found a rewritable disk I had one left that was still fairly new and used it, I clicked the none in the settings closed Fab reopened chose main movie burned it and checked it (played it back subtitles are still there I went in checked Fab settings again and it did not save the settings when reopening. The None was not checked, but I checked it and saved it and closed and reopened per your instructions. The program is not working properly and I do not know why. I have done everything I have done a complete uninstall and reg clean and reinstall 7 times now and am getting no where with this new version.

[90312]

Or this way if you don't want any subtitles at all ever on the individual backup disc:

[glenns]

Beckyw: After you change the subtitles to select no subtitles in Fab settings you must click ok and close Fab when you reopen Fab the settings will take effect.

Fab use to have a pop up box telling you this but it seems it was left out of the current version 9.

I have tested main movie with and without subtitles and it works fine for me.

[glenns]

BECKYW: Did you check don't record any subtitles in Fabs settings as the screen shot below shows? If you do it from main movie you have to uncheck the subtitles from each disk.

Regardless of this your player has settings to turn off subtitles and pick between them if theirs more than one.You don't have to do this from the dvd menu.

Displaying settings on the remote control of your player should bring up the on screen settings to adjust subtitles audio track etc.I never seen a hardware or soft wear player without them.

If you had a rewritable disk so you don't waste blanks I would of told you to try making the full disk by turning off pathfinder for this disk and try again.Also sometimes burning a ISO as I told you before works when full disk doesn't.

[BeckyW]

Main Movie

I burned a copy of Main Movie only BUT cannot get rid of the subtitles in this way. I went in and disabled the subtitles like it tells you but they are still in the DVD in the Main movie Copy without menus and crap as Steve said I also cannot get DVDFab Newest version to keep my settings I change them to lose the subtitles and it didn't save in the program and I end up with subtitles showing through out the whole movie. Without a menu I cannot disable them in my player or anywhere.

[90312]

Main Movie only here. I don't care for menus and previews and the extra crap. Try "Main Movie" and see if that's the difference?

[glenns]

Steve you saved to hard drive she burned to disk can you do a test burn as that's what's needed here and play from menu.

[BeckyW]

Nothing wrong I can find with DVDFab 9.1.1.9 and nothing wrong with preview. Red 2 copied flawlessly. Have you uninstalled, downloaded ccleaner (free version) and scrubbed the registry until it finds no errors, download a fresh installer, right click and "Run as Administrator"? Attachment:

I have done all that, I give up this doesn't make any sense that Percy Jackson would work fine and not Red2, both are brand new DVD's just purchased them and both original copies play perfectly in my DVD player,the backup of Percy I did also plays perfectly but not REd2

[BeckyW]

Internal Log Red2

DVDFab 9.1.1.9 (2013/12/28 22:33:18)

0m 00.10s: Start preload dll...
0m 00.12s: Load dll successful.
0m 00.14s: Start load fabplay dll...
0m 00.18s: Load fabplay dll successful.
0m 00.20s: Transfer settings successful.
0m 00.20s: info: fabcheck logpath= C:/Users/babmw/Documents/DVDFab9/Log/
0m 00.21s: fab_check_gpu is running ...
0m 00.43s: fab_check_gpu run successful
0m 00.43s: info: recommand= 0, Shrink support= 0, enable= 0, cuda_cap= 0 , cpu_count= 2
0m 00.43s: GPUAccelerate: 0
0m 00.43s: GPUAccelerate setting: 0, 0
0m 00.43s: CUDA cap: 0
0m 00.43s: Support coreavc decode: 0
0m 00.43s: Lighting shrink status: 0, 0
0m 00.45s: Graphics info: Intel(R) G45/G43 Express Chipset : :
0m 00.45s: Load config successful.
0m 00.45s: Windows os type is: 13.
0m 00.57s: Parse string is: 2:8260762964
0m 00.57s: Parse string is: 11:8260762964
0m 00.57s: Parse string is: 1:0
0m 00.57s: Parse string is: OV:9119
0m 00.57s: Parse string is: BV:9118
0m 00.57s: Parse string is: S:4e55ce15f603f8c434613822c77ad97c
0m 00.59s: Option check status: Local
0m 00.59s: HD Decrypter-1-0-215811
0m 00.59s: DVD to DVD (Gold)-0-0-200011
0m 00.59s: DVD to DVD-1-1-22311011
0m 00.59s: DVD to Mobile-1-1-22311011
0m 00.60s: Blu-ray to Blu-ray-1-0-215811
0m 00.60s: Blu-ray to Mobile-1-0-215811
0m 00.60s: File to Mobile-1-0-215811
0m 00.60s: Blu-ray to DVD-1-0-215811
0m 00.60s: File to DVD-1-0-215811
0m 00.60s: File to Blu-ray-1-0-215811
0m 00.60s: File Mover-1-0-215811
0m 00.60s: Blu-ray to 3D-1-0-215811
0m 00.60s: 2D to 3D-1-0-215811
0m 00.62s: Blu-ray Decrypt-1-0-200011
0m 00.62s: DVD Decrypt-1-0-200011
0m 00.62s: Init GPU settings successful.
0m 00.62s: CommmandLine:
0m 00.70s: Start get sys number.
0m 00.76s: Begin init preview play engine.
0m 00.76s: Init DirectShow engine successful.
0m 00.78s: connect 0 : start.
0m 00.88s: Serial number is: 00-26-2d-4e-7d-4e
0m 00.88s: Reg URL link is:
0m 00.88s: Version is: 9119
0m 00.88s: Product is: 2
0m 00.88s: Connect type is: 0
0m 01.06s: Burn engine: start init.
0m 01.17s: Burn engine: type-0.
0m 01.17s: Burn engine: 0- D:\ [HL-DT-ST DVDRAM GH60N UG00 (Ide)].
0m 01.17s: Burn engine: end init.
0m 02.12s: Init setting page successful.
0m 02.71s: Profile Manager :: End Load Profile
0m 02.82s: Times of connecting error is: 0
0m 02.82s: Parse string is: 2:8260762964
0m 02.82s: Parse string is: 11:8260762964
0m 02.82s: Parse string is: 1:0
0m 02.83s: Parse string is: OV:9119
0m 02.83s: Parse string is: BV:9118
0m 02.83s: Parse string is: S:be9c7aa667d600bee565e5425c20c513
0m 02.87s: Option check status: NewWork
0m 02.87s: HD Decrypter-1-0-215811
0m 02.87s: DVD to DVD (Gold)-0-0-200011
0m 02.87s: DVD to DVD-1-1-22311011
0m 02.87s: DVD to Mobile-1-1-22311011
0m 02.88s: Blu-ray to Blu-ray-1-0-215811
0m 02.88s: Blu-ray to Mobile-1-0-215811
0m 02.88s: File to Mobile-1-0-215811
0m 02.88s: Blu-ray to DVD-1-0-215811
0m 02.88s: File to DVD-1-0-215811
0m 02.89s: File to Blu-ray-1-0-215811
0m 02.89s: File Mover-1-0-215811
0m 02.89s: Blu-ray to 3D-1-0-215811
0m 02.89s: 2D to 3D-1-0-215811
0m 02.89s: Blu-ray Decrypt-1-0-200011
0m 02.89s: DVD Decrypt-1-0-200011
0m 03.03s: Init driveX with I/O mode: 0
0m 03.07s: opening drive D
0m 03.11s: opened i/o
0m 03.11s: got media type 12
0m 03.11s: got max lba 0
0m 03.39s: connect 0 : 1:1-10:1-11:1-12:1-13:1-14:1-15:1-
0m 25.29s: opening drive D
0m 25.32s: opened i/o
0m 25.33s: got media type 12
0m 25.33s: got max lba 0
5m 36.12s: set folder C:/Users/babmw/Desktop/New folder/RED_2/VIDEO_TS/ with type 0
5m 36.12s: opening folder C:/Users/babmw/Desktop/New folder/RED_2/VIDEO_TS/
5m 36.17s: set folder C:/Users/babmw/Desktop/New folder/RED_2/VIDEO_TS/ with type 0
5m 36.17s: opening folder C:/Users/babmw/Desktop/New folder/RED_2/VIDEO_TS/
5m 36.19s: Open blu-ray disc expired time: 215811
5m 36.21s: pathplayer enabled
5m 36.28s: button: vts_19 menu_1 pgc_11 cell_1 sector_3192 count_4
5m 36.28s: button: vts_19 menu_1 pgc_2 cell_1 sector_6997 count_4
5m 36.29s: button: vts_19 menu_1 pgc_3 cell_1 sector_13659 count_7
5m 36.32s: button: vts_19 menu_1 pgc_4 cell_1 sector_13502 count_9
5m 36.35s: button: vts_19 menu_1 pgc_10 cell_1 sector_13630 count_5
5m 36.45s: button: vts_19 menu_1 pgc_5 cell_1 sector_13545 count_9
5m 36.48s: button: vts_19 menu_1 pgc_6 cell_1 sector_13588 count_9
5m 44.54s: UILog:OnMsgToolbar_Start
5m 44.55s: UILog:Msg Start : ready start
5m 44.55s: UILog:Msg Start : start test run work
5m 44.56s: UILog:right button to null, work falg = -1
5m 44.56s: UILog:Msg Start : run work
5m 44.56s: UILog:Run current Work.
5m 44.56s: UILog:Begin work copy or converter.
5m 44.57s: UILog:start running at thread.
5m 44.58s: UILog:return flag at start running at thread ok.
5m 48.85s: Burn data size is: 4300
5m 48.85s: Burn disc space is: 4482
5m 49.29s: UILog:MsgWork:WorkStatus_Start
5m 49.37s: DVD Copy
5m 49.37s: Source: C:/Users/babmw/Desktop/New folder/RED_2/
5m 49.37s: SourceSize: 4300 MB
5m 49.37s: OutputSize: 4300 MB
9m 10.43s: UILog:MsgWork:WorkStatus_Start
9m 10.66s: burn folder C:\Users\babmw\Documents\DVDFab9\Temp\FullDisc\RED _2\ with VSO
18m 21.81s: UILog:MsgWork:current work finish : 3
19m 13.73s: UILog:OnMsgToolbar_BurnFinish
19m 13.73s: UILog:MsgWork:current work finish : 3
19m 13.73s: UILog:Run Work to end.

[BeckyW]

Ok that log shows a little more and 8x should be fine. Post your internal log and let's see what's there. Are you in the US? DVDFab 9.1.1.9 does RED_2 region 1 without issue.

yes I am in USA just did Percy Jackson with no problem whatsoever. Region 1

[BeckyW]

First thing I would do is cut the write speed to half the rated speed of the media, in this case 4x and give it a try.

I got a backup (perfect Copy) of the new Percy Jackson and did not have to change anything ,go tit on the first try also, so do not understand why Red2 is having issues, if the new version was supposed have fixed bugs as indicated were in these 2 particular DVD's then Red2 should not be an issue anymore for playback. So I don't know what the problem is, and I did as you suggested and slowed down the burn speed still not playable, same thing hit the play button and it plays the beginning music and goes to dark screen like the movie is getting ready to start playing then jumps right back to the beginning where you have to hit play button again and repeats itself its like the menu has been locked out or is missing something I cannot figure out what the problem is with this but it irritating me right now.

[90312]

Ok that log shows a little more and 8x should be fine. Post your internal log and let's see what's there. Are you in the US? DVDFab 9.1.1.9 does RED_2 region 1 without issue.

[BeckyW]

2013-12-28 22:52:42 ---- ******************** Log session stop 28-Dec 22:52:42.300 PID 1572********************
2013-12-28 22:51:32 Info WRITE SUCCESS: Disc written
2013-12-28 22:51:32 Info Finalization Time 00:00:22 - Total completion time 00:09:01
2013-12-28 22:51:10 Info Write finished in 00:08:39 - Finalization start here. Avg. burn rate 6.89
2013-12-28 22:43:03 Info Lead-in burning time (mS) 32025
2013-12-28 22:42:31 Info Write started 2202672 sectors to write
2013-12-28 22:42:31 Info Init success: DVD+R
2013-12-28 22:42:31 Info Writing speed requested x8.0, effective x8.0
2013-12-28 22:42:31 Info Available write speed: 16x ,12x ,8x ,4x
2013-12-28 22:42:30 Info Media ID: TDK-003-00
2013-12-28 22:42:30 Info Media type: DVD+R
2013-12-28 22:42:30 Info DMA Mode
2013-12-28 22:42:30 Info Scanned files #64, folder #2 - total size 4509845504 b. (4.20 Gb.)
2013-12-28 22:42:30 Info Inserted media type : DVD+R
2013-12-28 22:42:30 Info Write started
2013-12-28 22:39:05 Info Writable disc DVD+R inserted. Ready to write
2013-12-28 22:39:03 Info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVDRAM, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R
2013-12-28 22:39:03 Info Drive has IDE-ATAPI physical interface
2013-12-28 22:39:03 Info New Drive selected : 0:0:0 - HL-DT-ST DVDRAM GH60N UG00 [D] (Ide)
2013-12-28 22:39:00 Info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVDRAM, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R
2013-12-28 22:39:00 Info Drive has IDE-ATAPI physical interface
2013-12-28 22:39:00 Info New Drive selected : 0:0:0 - HL-DT-ST DVDRAM GH60N UG00 [D] (Ide)
2013-12-28 22:33:19 Info Current Drive selected : 0:0:0 - HL-DT-ST DVDRAM GH60N UG00 [D] (Ide)
2013-12-28 22:33:19 Info Using Advanced SPTI interface
2013-12-28 22:33:19 Info System default language : English (United States)
2013-12-28 22:33:19 Info User default language : English (United States)
2013-12-28 22:33:19 Info DLL Version : 4.0.21.489
2013-12-28 22:33:19 Info DLL : C:\Program Files (x86)\DVDFab 9\vso_hwe.dll
2013-12-28 22:33:19 Info Version : 9, 1, 1, 9
2013-12-28 22:33:19 Info ExeName : C:\Program Files (x86)\DVDFab 9\DVDFab.exe
2013-12-28 22:33:19 Info OS : Microsoft Windows XP Home Edition (Build 2600: Service Pack 3)
2013-12-28 22:33:19 ---- ******************** Log session start 28-Dec 22:33:19.767 PID 1572********************


2013-12-28 22:32:57 ---- ******************** Log session stop 28-Dec 22:32:57.380 PID 840********************
2013-12-28 22:31:14 Info Current Drive selected : 0:0:0 - HL-DT-ST DVDRAM GH60N UG00 [D] (Ide)
2013-12-28 22:31:14 Info Using Advanced SPTI interface
2013-12-28 22:31:14 Info System default language : English (United States)
2013-12-28 22:31:14 Info User default language : English (United States)
2013-12-28 22:31:14 Info DLL Version : 4.0.21.489
2013-12-28 22:31:14 Info DLL : C:\Program Files (x86)\DVDFab 9\vso_hwe.dll
2013-12-28 22:31:14 Info Version : 9, 1, 1, 8
2013-12-28 22:31:14 Info ExeName : C:\Program Files (x86)\DVDFab 9\DVDFab.exe
2013-12-28 22:31:14 Info OS : Microsoft Windows XP Home Edition (Build 2600: Service Pack 3)
2013-12-28 22:31:14 ---- ******************** Log session start 28-Dec 22:31:14.418 PID 840********************


2013-12-28 21:52:25 ---- ******************** Log session stop 28-Dec 21:52:25.199 PID 2452********************
2013-12-28 21:51:14 Info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVDRAM, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R
2013-12-28 21:51:14 Info Drive has IDE-ATAPI physical interface
2013-12-28 21:51:14 Info New Drive selected : 0:0:0 - HL-DT-ST DVDRAM GH60N UG00 [D] (Ide)
2013-12-28 21:50:23 Info Current Drive selected : 0:0:0 - HL-DT-ST DVDRAM GH60N UG00 [D] (Ide)
2013-12-28 21:50:23 Info Using Advanced SPTI interface
2013-12-28 21:50:23 Info System default language : English (United States)
2013-12-28 21:50:23 Info User default language : English (United States)
2013-12-28 21:50:23 Info DLL Version : 4.0.21.489
2013-12-28 21:50:23 Info DLL : C:\Program Files (x86)\DVDFab 9\vso_hwe.dll
2013-12-28 21:50:23 Info Version : 9, 1, 1, 9
2013-12-28 21:50:23 Info ExeName : C:\Program Files (x86)\DVDFab 9\DVDFab.exe
2013-12-28 21:50:23 Info OS : Microsoft Windows XP Home Edition (Build 2600: Service Pack 3)
2013-12-28 21:50:23 ---- ******************** Log session start 28-Dec 21:50:23.299 PID 2452********************

I did a back up copy of my Percy Jackson DVd and had no problem whatsoever got a perfect copy, so why is Red 2 not working if this new version was supposed to fix the playback issues in these 2 particular movies from I read, it didn't work as intended only working for Percy but not Red2