XIII conspiracy

[athlon700]

I haven't seen this before, the blu ray has 2 movies on it, one in french and the other in English, so I do a movie only copy in English uncompressed to the HD. It goes great until it reaches 78% then the read speed starts dropping until the copy gets to 78+% then the read speed is at 0.01 and stays there. the computer itself slows to a crawl to where it takes 30 or 40 sec to load a browser. the system is a AMD Phenom II X6 with 16 gig of ram and a GTX 580 video card running win7 64. it has taken 2 hrs to go from 78% to 79%.

[HIDEF]

I haven't seen this before, the blu ray has 2 movies on it, one in french and the other in English, so I do a movie only copy in English uncompressed to the HD. It goes great until it reaches 78% then the read speed starts dropping until the copy gets to 78+% then the read speed is at 0.01 and stays there. the computer itself slows to a crawl to where it takes 30 or 40 sec to load a browser. the system is a AMD Phenom II X6 with 16 gig of ram and a GTX 580 video card running win7 64. it has taken 2 hrs to go from 78% to 79%.

I had this happen to me with Iron Man 2 and another movie that I can't think of at the moment. So I got fed up and used a well known program,axxxxxhd and ripped it to my hard drive and let fab then copy it to its temp folder. Fab was still very slow but it didn't stop and it got thru in just a few minutes. Read the info on the new beta version of fab 8076B I think it is. It says faster scanning for these problem movies.
Sorry, just saw that you posted under 8076B. Are you using it? If you have a log you'll have to post it for the experts to read.

[athlon700]

actually I clicked on the wrong one, i'm using 8.0.7.3

[Guest]

actually I clicked on the wrong one, i'm using 8.0.7.3

Download V8076 from this link..

[athlon700]

nope, does the same thing. starts slowing from 9 meg at 78% and by 78.60 it is down to 0.001 with no cpu activity
v8.0.7.6 dated 25/02/2011

wait... it did finish and it said it skipped 25 sectors and the movie is incomplete. let me try a full disk copy to hd then do main

[athlon700]

nope, task 1 failed error=102

[DiabloZoe]

nope, task 1 failed error=102

Few questions? Are you compressing a 50GB down to a 25GB? Are you riping the entire movie to the HDD and then compressing on the HDD? And can you please post your logs?

[athlon700]

I am just copying disk to HHD no compression. I tried posting the log but it says file too long. which file do they need

[ernielee]

could be a bad disk or check and clean disk.
this happen to me I just exchanged the movie and all was good
with the new disk.

[DiabloZoe]

I am just copying disk to HHD no compression. I tried posting the log but it says file too long. which file do they need

it will be the internal.log and just copy and paste!! But not the whole log just the time you are having problems with the movie! It will have the version date and time most likley the last one on the log if you have not burned anymore movies!

[athlon700]

it wont scan past 78%

DVDFab 8.0.7.6 (2011/03/04 18:43:04)


0m 00.74s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1
0m 13.43s: detected blu-ray
0m 13.43s: drive D
0m 13.43s: blu-ray type 1
0m 13.43s: volume label XIII THE CONSPIRACY
0m 16.22s: detected blu-ray
0m 16.22s: drive D
0m 16.22s: blu-ray type 1
0m 16.22s: volume label XIII THE CONSPIRACY
0m 19.89s: root 03D79AFA XIII THE CONSPIRACY:XIII THE CONSPIRACY:XIII THE CONSPIRACY:XIII THE CONSPIRACY
0m 20.07s: aacs 1 bd+ 0
0m 20.17s: got discinfo
0m 20.24s: got bdmv
0m 20.26s: got agid 0
0m 20.28s: sent host cert chal
0m 20.28s: got drive cert chal
0m 20.28s: BEC 0
0m 20.28s: DRIVE_VENDOR 0x0116
0m 20.31s: got drive key
0m 20.63s: got host key signature
0m 20.63s: verified drive signature
0m 20.63s: verified host signature
0m 20.67s: sent host signature and key point
0m 20.67s: got bus key
0m 20.67s: got volume id
0m 20.67s: got volume id mac
0m 20.67s: volume id is correct
0m 20.67s: got vid
0m 20.73s: blu-ray 247E3ECC9B639E5B5588BD419FBA09DBEFD735BA
0m 21.60s: D 9CEA48E1
0m 21.62s: got vuk
0m 21.62s: got unit key 1
0m 51.38s: got extended bdinfo
0m 51.38s: opened blu-ray

[Snowbird]

could be a bad disk or check and clean disk.
this happen to me I just exchanged the movie and all was good
with the new disk.

ERROR 102 is a read error indicating a dirty, scratched or otherwise unreadable disk. Do as Ernielee suggested above and try again.

[athlon700]

the disk is new with no smudges or scratches. It plays fine I just like to have a back-up and put the original away.

[DiabloZoe]

the disk is new with no smudges or scratches. It plays fine I just like to have a back-up and put the original away.

Sometimes and not often disc get a bad press could be with yours. Its a weird thing but does happen!