Unable to copy a BD-3D. Freezes on second .ssif

[Kannkor]

Just got my first 3D BD, Tangled. Been having issue trying to get it to burn. Here is what I have tried, all resulting in the same issue.

Disc -> CloneISO. (Test1)
Disc -> Copy Full Disc 3D (Test2)

Test1 -> Main Movie - SBS on BD25.
Test2 -> Main Movie - SBS on BD25.
Disc -> Main Movie -SBS on BD25.

In all 3 cases, it completes the first source ( 00012.ssif ), then as soon as it starts on the second ( 00013.ssif ) the task time left goes to 0, and the progress never increases (59.79%) . Takes approprimately 4 hours to complete 00012, and I've left it running on 00013 for around 20 hours and the percentage never increased.


Below is from a computer with the following specs..
Windows 2008 Enterprise 64 bit
i7 950 @ 3ghz
12 gig RAM

DVDFab 8.1.2.6 (2011/10/19  14:54:53)

 0m 02.12s: Qt Translator file load success 
 0m 04.49s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 0 filemover 0
 0m 09.84s: detected blu-ray
 0m 09.86s: drive D
 0m 09.86s: blu-ray type 1
 0m 09.86s: volume label SURFING3D
 0m 10.25s: aacs 1 bd+ 0
 0m 10.78s: got discinfo
 0m 10.82s: got bdmv
 0m 10.84s: Vendor: ATAPI
 0m 10.84s: Product: iHBS112   2
 0m 10.84s: Revision: CL0J
 0m 10.84s: Vendor specific: 2010/12/08 15:14
 0m 10.84s: AACS version: 1
 0m 10.84s: Number of concurrent AGIDs: 2
 0m 10.84s: Supports bus encryption: NO
 0m 10.84s: Supports binding nonce generation: NO
 0m 10.84s: Supports Hybrid discs: NO
 0m 10.84s: got agid 0
 0m 10.90s: sent host cert chal
 0m 10.90s: got drive cert chal
 0m 10.90s: BEC 0
 0m 10.90s: DRIVE_VENDOR 0x0128
 0m 10.98s: got drive key
 0m 11.51s: got host key signature
 0m 11.51s: verified drive signature
 0m 11.51s: verified host signature
 0m 11.59s: sent host signature and key point
 0m 11.59s: got bus key
 0m 11.59s: got agid 0
 0m 11.65s: sent host cert chal
 0m 11.66s: got drive cert chal
 0m 11.66s: BEC 0
 0m 11.66s: DRIVE_VENDOR 0x0128
 0m 11.74s: got drive key
 0m 11.74s: got host key signature
 0m 11.74s: verified drive signature
 0m 11.74s: verified host signature
 0m 11.82s: sent host signature and key point
 0m 11.82s: got bus key
 0m 13.07s: got volume id
 0m 13.07s: got volume id mac
 0m 13.07s: volume id is correct
 0m 13.07s: got vid
 0m 13.26s: blu-ray 472C7EE1B89C8CAF8C655B2C08DEBD1D69273CFE
 0m 13.96s: cert BEE=0x00 same
 0m 14.16s: D 7013A8CA
 0m 14.16s: got vuk
 0m 14.54s: got unit key 1
 0m 25.58s: got extended bdinfo
 0m 25.58s: opened blu-ray
79m 11.51s: Blu-ray Copy: Main Movie
79m 11.51s: Source: D:\BDMV\
79m 11.51s: Playlist: 4
79m 11.51s: Chapters: 1 -> 13
79m 11.51s: TotalSize: 27140 MB
79m 11.51s: SourceSize: 34303 MB
79m 11.51s: RemoveHDAudio: 0
79m 11.51s: CompressToAC3: 0
79m 11.51s: OutputDisc: BDMV
79m 11.51s: OutputTarget: BD25
79m 11.51s: OutputVideo: 1080p/i
79m 11.51s: info: enable bd copy(mode=1)
79m 11.52s: info: video encode mode(0), bitrate(16151), lr-encode(no)
79m 11.52s: info: streams(4113.2,4352.1,4608.1)
79m 11.52s: info: blu-ray copy begin (unit[elem[atomic[00012.ssif],atomic[00013.ssif]]])
79m 11.52s: CUDA GPU acceleration for video encoding enabled
79m 11.54s: info: h264_encode: encode param profile(2) level(41) bitrate(16151)
79m 11.79s: info: processing source(00012.ssif)
415m 33.85s: info: processing source(00013.ssif)

Below is from a computer with the following specs..
Windows 7 Enterprise
Intel Core 2 Quad q9550 2.8ghz
8 GB ram

DVDFab 8.1.2.6 (2011/10/19  22:51:20)

 0m 01.62s: Qt Translator file load success 
 0m 02.02s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 0 bd23d 1 bd2dvd 1 file2mobile 0 filemover 0
 0m 06.81s: detected blu-ray
 0m 06.81s: drive D
 0m 06.81s: blu-ray type 1
 0m 06.81s: volume label SURFING3D
 0m 07.28s: aacs 1 bd+ 0
 0m 07.61s: got discinfo
 0m 07.64s: got bdmv
 0m 07.66s: Vendor: HL-DT-ST
 0m 07.66s: Product: BD-RE  WH08LS20
 0m 07.66s: Revision: 2.00
 0m 07.66s: Vendor specific: 
 0m 07.66s: AACS version: 1
 0m 07.66s: Number of concurrent AGIDs: 1
 0m 07.66s: Supports bus encryption: NO
 0m 07.66s: Supports binding nonce generation: YES
 0m 07.66s: Supports Hybrid discs: NO
 0m 07.66s: got agid 0
 0m 07.67s: sent host cert chal
 0m 07.67s: got drive cert chal
 0m 07.67s: BEC 0
 0m 07.67s: DRIVE_VENDOR 0x0116
 0m 07.70s: got drive key
 0m 08.17s: got host key signature
 0m 08.17s: verified drive signature
 0m 08.17s: verified host signature
 0m 08.20s: sent host signature and key point
 0m 08.20s: got bus key
 0m 08.22s: got agid 0
 0m 08.23s: sent host cert chal
 0m 08.23s: got drive cert chal
 0m 08.23s: BEC 0
 0m 08.23s: DRIVE_VENDOR 0x0116
 0m 08.28s: got drive key
 0m 08.28s: got host key signature
 0m 08.28s: verified drive signature
 0m 08.28s: verified host signature
 0m 08.31s: sent host signature and key point
 0m 08.31s: got bus key
 0m 08.31s: got volume id
 0m 08.31s: got volume id mac
 0m 08.31s: volume id is correct
 0m 08.31s: got vid
 0m 08.40s: blu-ray 472C7EE1B89C8CAF8C655B2C08DEBD1D69273CFE
 0m 08.95s: cert BEE=0x00 same
 0m 09.09s: D 7013A8CA
 0m 09.09s: got vuk
 0m 09.09s: got unit key 1
 0m 18.34s: got extended bdinfo
 0m 18.34s: opened blu-ray
36m 39.27s: Blu-ray Copy: Main Movie
36m 39.27s: Source: D:\BDMV\
36m 39.27s: Playlist: 4
36m 39.27s: Chapters: 1 -> 13
36m 39.27s: TotalSize: 27140 MB
36m 39.27s: SourceSize: 34318 MB
36m 39.27s: RemoveHDAudio: 0
36m 39.27s: CompressToAC3: 0
36m 39.27s: OutputDisc: BDMV
36m 39.27s: OutputTarget: BD25
36m 39.27s: OutputVideo: 1080p/i
36m 39.27s: info: enable bd copy(mode=1)
36m 39.28s: info: video encode mode(0), bitrate(16741), lr-encode(no)
36m 39.28s: info: streams(4113.2,4352.1,4608.1)
36m 39.28s: info: blu-ray copy begin (unit[elem[atomic[00012.ssif],atomic[00013.ssif]]])
36m 39.30s: CUDA GPU acceleration for video encoding enabled
36m 39.30s: info: h264_encode: encode param profile(2) level(41) bitrate(16741)
36m 39.52s: info: processing source(00012.ssif)
91m 34.12s: info: processing source(00013.ssif)

[Wilson.Wang]

Hi,

Please try the latest build, and set Software as decoder and encoder in Common Settings.
BTW, what's the antivirus program you are installed?

Wilson

[Kannkor]

Hi,

Please try the latest build, and set Software as decoder and encoder in Common Settings.
BTW, what's the antivirus program you are installed?

Wilson

I'll try the beta build.

And who uses antivirus software? pffft... (None). My server literally has windows server 2008, and DVDFab installed, and a 16 TB raid...

[Kannkor]

Very interesting!

I changed to the beta build, I set it to software only, and the disc burnt (didn't freeze).

The TV I had available isn't 3D, but I see 2 separate images, 1 on the right, and 1 on the left. I'm guessing that's what I'm suppose to be seeing. I'll try it out for real here shortly. Appreciate the help.

[knighter]

The TV I had available isn't 3D.

Dear Kannkor,

Please play the 3D copy on 3D TV, normal TV can not play 3D film correctly.


Best regards,

Knighter