I don't know if I am in the right place so if not, please forgive me. For a week I have had trouble figuring out what I am doing wrong. Every time I try and burn or copy a disc or image it always fails at the beginning of the second part of the process at "Writing Lead-In" when I insert the blank disc. I am using Verbatim 25GB BD-RE 6x blank discs. I can rip movies and use DVDFAB HD to put them on the hard drive and I have tried burning and copying DVDs and they work, however, I am unable to copy or burn to Bluray at all. I have used all three discs the Verbatim pack came with, tried three different Bluray movies, made sure my Bluray burner Firmware is up-to-date, etc... The burner has great reviews and seeing how it burns DVDs perfectly and rips just fine, I can't see that it is defective.
Here is the log from the DVDFAB HD/IMGBURN attempt:
I 00:06:34 ImgBurn Version 2.5.6.0 started!
I 00:06:34 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1)
I 00:06:34 Total Physical Memory: 4,176,500 KB - Available: 2,678,820 KB
I 00:06:34 Initialising SPTI...
I 00:06:34 Searching for SCSI / ATAPI devices...
I 00:06:34 -> Drive 1 - Info: ATAPI iHBS212 2 5L09 (F
(ATA)
I 00:06:34 -> Drive 2 - Info: MagicISO Virtual DVD-ROM 1.0A (E (Unknown)
I 00:06:34 Found 1 DVD-ROM and 1 BD-RE!
I 00:06:59 Operation Started!
I 00:06:59 Building Image Tree...
I 00:06:59 Calculating Totals...
I 00:06:59 Preparing Image...
I 00:06:59 Contents: 12 Files, 15 Folders
I 00:06:59 Content Type: BD Video
I 00:06:59 Data Type: MODE1/2048
I 00:06:59 File System(s): UDF (2.50)
I 00:06:59 Volume Label: VOLUME_ID
I 00:06:59 Size: 23,623,364,620 bytes
I 00:06:59 Sectors: 11,534,853
I 00:06:59 Image Size: 23,624,417,280 bytes
I 00:06:59 Image Sectors: 11,535,360
I 00:06:59 Operation Successfully Completed! - Duration: 00:00:00
I 00:06:59 Operation Started!
I 00:06:59 Source File: -==/\/[BUILD IMAGE]\/\==-
I 00:06:59 Source File Sectors: 11,535,360 (MODE1/2048)
I 00:06:59 Source File Size: 23,624,417,280 bytes
I 00:06:59 Source File Volume Identifier: VOLUME_ID
I 00:06:59 Source File Volume Set Identifier: 403900DD00B00385
I 00:06:59 Source File Application Identifier: ImgBurn v2.5.6.0
I 00:06:59 Source File Implementation Identifier: ImgBurn
I 00:06:59 Source File File System(s): UDF (2.50)
I 00:06:59 Destination Device: [2:0:0] ATAPI iHBS212 2 5L09 (F (ATA)
I 00:06:59 Destination Media Type: BD-R (Disc ID: VERBAT-IMe-000)
I 00:06:59 Destination Media Supported Write Speeds: 4x, 6x
I 00:06:59 Destination Media Sectors: 12,219,392
I 00:06:59 Write Mode: BD
I 00:06:59 Write Type: DAO
I 00:06:59 Write Speed: MAX
I 00:06:59 BD-R Verify Not Required: Yes
I 00:06:59 Link Size: Auto
I 00:06:59 Lock Volume: Yes
I 00:06:59 Test Mode: No
I 00:06:59 OPC: No
I 00:06:59 BURN-Proof: Enabled
I 00:07:01 Write Speed Successfully Set! - Effective: 26,970 KB/s (6x)
I 00:07:01 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes
I 00:08:05 Filling Buffer... (40 MB)
I 00:08:06 Writing LeadIn...
W 00:09:10 Failed to Write Sectors 0 - 31 - Reason: Timeout on Logical Unit
W 00:09:10 Retrying (1 of 20)...
W 00:10:13 Retry Failed - Reason: Timeout on Logical Unit
W 00:10:13 Retrying (2 of 20)...
W 00:11:16 Retry Failed - Reason: Timeout on Logical Unit
W 00:11:16 Retrying (3 of 20)...
W 00:12:20 Retry Failed - Reason: Timeout on Logical Unit
W 00:12:20 Retrying (4 of 20)...
I 00:12:48 Abort Request Acknowledged
W 00:13:23 Retry Failed - Reason: Timeout on Logical Unit
E 00:13:23 Failed to Write Sectors 0 - 31 - Reason: Timeout on Logical Unit
I 00:13:23 Synchronising Cache...
W 00:13:29 User opted to skip the 'Close Track/Session/Disc' functions.
E 00:13:29 Failed to Write Image!
E 00:13:32 Operation Failed! - Duration: 00:06:29
I 00:13:32 Average Write Rate: N/A - Maximum Write Rate: N/A
LiteON ATAPI iHBS212
Windows 7 64 bit
DVDFAB 8.1.5.9
IMGBURN 2.5.6.0
Regardless of the program or version, it will still not work. I have used the new Nero, Imgburn, DVDFAB HD and Cyberlink Suite. Sorry for all the info but if anyone has any ideas that may help me before I ship this back to Newegg, I would very much appreciate it!
Thanks again,
Dylan
Here is the log from the DVDFAB HD/IMGBURN attempt:
I 00:06:34 ImgBurn Version 2.5.6.0 started!
I 00:06:34 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1)
I 00:06:34 Total Physical Memory: 4,176,500 KB - Available: 2,678,820 KB
I 00:06:34 Initialising SPTI...
I 00:06:34 Searching for SCSI / ATAPI devices...
I 00:06:34 -> Drive 1 - Info: ATAPI iHBS212 2 5L09 (F
(ATA)I 00:06:34 -> Drive 2 - Info: MagicISO Virtual DVD-ROM 1.0A (E
(Unknown)I 00:06:34 Found 1 DVD-ROM and 1 BD-RE!
I 00:06:59 Operation Started!
I 00:06:59 Building Image Tree...
I 00:06:59 Calculating Totals...
I 00:06:59 Preparing Image...
I 00:06:59 Contents: 12 Files, 15 Folders
I 00:06:59 Content Type: BD Video
I 00:06:59 Data Type: MODE1/2048
I 00:06:59 File System(s): UDF (2.50)
I 00:06:59 Volume Label: VOLUME_ID
I 00:06:59 Size: 23,623,364,620 bytes
I 00:06:59 Sectors: 11,534,853
I 00:06:59 Image Size: 23,624,417,280 bytes
I 00:06:59 Image Sectors: 11,535,360
I 00:06:59 Operation Successfully Completed! - Duration: 00:00:00
I 00:06:59 Operation Started!
I 00:06:59 Source File: -==/\/[BUILD IMAGE]\/\==-
I 00:06:59 Source File Sectors: 11,535,360 (MODE1/2048)
I 00:06:59 Source File Size: 23,624,417,280 bytes
I 00:06:59 Source File Volume Identifier: VOLUME_ID
I 00:06:59 Source File Volume Set Identifier: 403900DD00B00385
I 00:06:59 Source File Application Identifier: ImgBurn v2.5.6.0
I 00:06:59 Source File Implementation Identifier: ImgBurn
I 00:06:59 Source File File System(s): UDF (2.50)
I 00:06:59 Destination Device: [2:0:0] ATAPI iHBS212 2 5L09 (F
(ATA)I 00:06:59 Destination Media Type: BD-R (Disc ID: VERBAT-IMe-000)
I 00:06:59 Destination Media Supported Write Speeds: 4x, 6x
I 00:06:59 Destination Media Sectors: 12,219,392
I 00:06:59 Write Mode: BD
I 00:06:59 Write Type: DAO
I 00:06:59 Write Speed: MAX
I 00:06:59 BD-R Verify Not Required: Yes
I 00:06:59 Link Size: Auto
I 00:06:59 Lock Volume: Yes
I 00:06:59 Test Mode: No
I 00:06:59 OPC: No
I 00:06:59 BURN-Proof: Enabled
I 00:07:01 Write Speed Successfully Set! - Effective: 26,970 KB/s (6x)
I 00:07:01 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes
I 00:08:05 Filling Buffer... (40 MB)
I 00:08:06 Writing LeadIn...
W 00:09:10 Failed to Write Sectors 0 - 31 - Reason: Timeout on Logical Unit
W 00:09:10 Retrying (1 of 20)...
W 00:10:13 Retry Failed - Reason: Timeout on Logical Unit
W 00:10:13 Retrying (2 of 20)...
W 00:11:16 Retry Failed - Reason: Timeout on Logical Unit
W 00:11:16 Retrying (3 of 20)...
W 00:12:20 Retry Failed - Reason: Timeout on Logical Unit
W 00:12:20 Retrying (4 of 20)...
I 00:12:48 Abort Request Acknowledged
W 00:13:23 Retry Failed - Reason: Timeout on Logical Unit
E 00:13:23 Failed to Write Sectors 0 - 31 - Reason: Timeout on Logical Unit
I 00:13:23 Synchronising Cache...
W 00:13:29 User opted to skip the 'Close Track/Session/Disc' functions.
E 00:13:29 Failed to Write Image!
E 00:13:32 Operation Failed! - Duration: 00:06:29
I 00:13:32 Average Write Rate: N/A - Maximum Write Rate: N/A
LiteON ATAPI iHBS212
Windows 7 64 bit
DVDFAB 8.1.5.9
IMGBURN 2.5.6.0
Regardless of the program or version, it will still not work. I have used the new Nero, Imgburn, DVDFAB HD and Cyberlink Suite. Sorry for all the info but if anyone has any ideas that may help me before I ship this back to Newegg, I would very much appreciate it!
Thanks again,
Dylan
Comment