Having a hard time getting COMPRESSED 3d movies to transfer to another drive in 3d

[glenns]

Hi for some reason i am having a hard time getting compressed 3d movies to play on my media players hard drive.I transfer them over using the mounted miniso file and they only play in 2d.I did this many times before and did it like this 1st make ISO 50 gigs then reduce 50 gig 3d iso to main movie 25 gig 3d folder with the movie mounted in virtual drive then i mounted the miniso file in IMG. burn with the output set to Iso and the medias players hard drive this resulted in a 3d iso that played fine in my media player that plays 3d from files or Iso's.

I make ISo'S instead of files because it keeps all the player's movies order by name.I also tried to do the last step in fab and make a ISO and also tried full disk to make a file the result is always a 2d copy and like i said before i have done it just like this before and all worked fine.I tried it with both current and past fab software and also tried virtual drive current and one before current issue of software with same results.

The reduced 3d movies on the players hard drive still play fine just that i can't seem to get any more Fab reduced 3d movies to play on the media player i wanted to reduce all my 3d movies to 25 gig full resolution to make more room on the 3t drive.It's just the reduced 3d movies i am having this problem with all 50 gig fab made backups work fine and you can transfer them over with windows without any problems.

I hope someone can help me out here as whenever i post a 3d question or problem i don't get a working solution I know this is fairly new so maybe someone that has time can try what i did and see if it works or not for them as i am pulling out whats let of my hair because it worked before at least 5 times just the way i listed doing it above.They keep changing Fab and virtual drive so i reverted to the past versions without luck maybe not the right versions.Thanks in advance for any help.

[Wilson.Wang]

I transfer them over using the mounted miniso file and they only play in 2d

Which player you are used? And please post your log file.
Play the 3D movie well by PowerDVD and TMT5, mount the .miniso file or ISO file.

Wilson

[glenns]

Willson I can't play 3d dvds in 3d on my computer i use a Micca media player to play 3d files made with fab on a second external ubs hard drive,My problem comes when i transfer from the hard drive on my computer to the ubs hard drive the files only play in 2d but fab makes them in 3d if i burn a disk they work but i can't get a fab reduced disk main movie or file from the hard drive fab is on to a second hard drive my media player uses they transfer over fine but only play in 2d.

Any 50 gig fab made ISO 3d movie works fine and they transfer over to the external hard drive even windows transfers it in 3d just the fab made 25 gig main movie files made from 50 gig 3d iso's or even made from store disk main movie won't transfer over in 3d and i did this before 4-5 times so i don't know why i can't do it now.I am going crazy over this it works with 50 gig iso's but not with reduced to 25 gig files by fab.I have at least 4 reduced to 25 gig 3d files on the drive that play in 3d fine all turned back into iso's with img burn before i put them on the second drive.I wonder if something was changed in Virtual drive 1.4.0.0. as that program updated 8-30-12.

[Wilson.Wang]

I have not used the Micca media player before which you said.
And I found some info form Internet, maybe yours is like this one in the link:http://content.miccastore.com/micca-ep600 Support play ISO file directly.

Did you output to a folder when compressing to bd25? Please output to an ISO by DVDFab and then try to play the ISO file on your Media player.

Hope this help you!

Wilson

[glenns]

Wilson Yes i always output to a 3d file if i burn it to disk it plays fine but how do i get it over to a second hard drive with the ssif files.The micca can play folders or ISO'S in 3d model ep600G2.

I don't understand when i transfer over the file to the other hard drive how or if the micca player can see,play, or use the minstro file with the hidden ssif files.I only know i have reduced 4 or 5 50 gig movies to main movie 3d with fab then made a Iso file from the fab 3d files using img burn and transfered it over that way but now it won't work all i get is a 2d movie.Did something change in Virtual drive it updated aug.30,2012?

Keep in mind a 50 gig fab made iso from a store brought disk will transfer over to the micca's hard drive very easy even just using windows not even mounting to virtual drive and play in 3d or 2d just fine.The problem is only with a fab reduced to 25 gig 3d movie going from one drive to another and keeping whatever the Micca player needs to play in 3d.Below is some logs trying different ways to go from 25gig fab made 3d main movie on computers drive to drive that Micca media player uses.

[glenns]

Wilson:Sorry i forgot to add my logs from my last post here they are trying different ways to get the 3d 25 gig main movie from 1 drive to the other using fab.Wanting the media player to play in 3d.



DVDFab 8.2.1.0 (2012/09/18 23:16:45)

0m 03.96s: GPUAccelerate: 3
0m 03.96s: CUDA cap: 0
0m 03.96s: Support coreavc decode: 0
0m 03.96s: Graphics info: ATI Radeon HD 4550 : :
0m 03.96s: Qt Translator file load success
0m 04.03s: Load config successful.
0m 04.19s: Init profile data driver sucessful.
0m 09.12s: Init GPU settings sucessful.
0m 09.12s: option dvd2dvd 0 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 09.13s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 09.55s: Config ExBar successful.
0m 09.55s: dvd2dvd have 8 elements.
0m 09.68s: dvd2mobile have 31 elements.
0m 11.16s: blu-ray2blu-ray have 4 elements.
0m 11.21s: blu-ray2mobile have 20 elements.
0m 12.14s: blu-ray23d have 7 elements.
0m 12.41s: blu-ray2dvd have 1 elements.
0m 12.46s: file2mobile have 30 elements.
0m 13.86s: file2dvd have 1 elements.
0m 13.90s: file2bluray have 1 elements.
0m 14.52s: Config work ui controls successful.
0m 14.54s: Init burn engine successful.
0m 14.66s: StartNotify successful.
0m 14.75s: opening drive E
0m 14.85s: opened i/o
0m 14.85s: got media type 16
0m 14.86s: got max lba 0
0m 14.99s: opening drive F
0m 15.21s: opened i/o
0m 15.21s: failed to detect media type
0m 15.23s: got max lba 1151
0m 19.74s: opening drive E
0m 19.83s: opened i/o
0m 19.84s: got max lba 0
4m 36.66s: opening drive E
4m 37.83s: opened i/o
4m 37.84s: got media type 16
4m 38.67s: got max lba 11636351
4m 39.39s: type Blu-ray BDMV
4m 39.40s: volume label WRATH_OF_THE_TITANS
4m 39.45s: aacs 0 bd+ 0
4m 40.09s: got discinfo
4m 40.25s: got bdmv
4m 40.48s: got extended bdinfo
4m 40.48s: opened blu-ray


DVDFab 8.2.1.0 (2012/09/18 23:25:11)

0m 02.73s: GPUAccelerate: 3
0m 02.73s: CUDA cap: 0
0m 02.73s: Support coreavc decode: 0
0m 02.73s: Graphics info: ATI Radeon HD 4550 : :
0m 02.74s: Qt Translator file load success
0m 02.81s: Load config successful.
0m 02.90s: Init profile data driver sucessful.
0m 07.07s: Init GPU settings sucessful.
0m 07.08s: option dvd2dvd 0 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 07.09s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 07.49s: Config ExBar successful.
0m 07.50s: dvd2dvd have 8 elements.
0m 07.62s: dvd2mobile have 31 elements.
0m 09.08s: blu-ray2blu-ray have 4 elements.
0m 09.13s: blu-ray2mobile have 20 elements.
0m 10.06s: blu-ray23d have 7 elements.
0m 10.33s: blu-ray2dvd have 1 elements.
0m 10.38s: file2mobile have 30 elements.
0m 11.80s: file2dvd have 1 elements.
0m 11.84s: file2bluray have 1 elements.
0m 12.47s: Config work ui controls successful.
0m 12.51s: Init burn engine successful.
0m 12.62s: StartNotify successful.
0m 12.63s: opening drive E
0m 12.63s: opened i/o
0m 12.64s: got media type 16
0m 13.27s: got max lba 11636351
0m 14.32s: type Blu-ray BDMV
0m 14.32s: volume label WRATH_OF_THE_TITANS
0m 14.46s: opening drive F
0m 14.68s: opened i/o
0m 14.69s: failed to detect media type
0m 14.70s: got max lba 1151
0m 19.28s: opening drive E
0m 19.29s: opened i/o
0m 20.14s: got max lba 11636351
0m 21.23s: aacs 0 bd+ 0
0m 21.85s: got discinfo
0m 21.97s: got bdmv
0m 22.21s: got extended bdinfo
0m 22.22s: opened blu-ray


DVDFab 8.2.1.0 (2012/09/19 00:05:03)

0m 03.00s: GPUAccelerate: 3
0m 03.00s: CUDA cap: 0
0m 03.00s: Support coreavc decode: 0
0m 03.00s: Graphics info: ATI Radeon HD 4550 : :
0m 03.01s: Qt Translator file load success
0m 03.08s: Load config successful.
0m 03.18s: Init profile data driver sucessful.
0m 07.78s: Init GPU settings sucessful.
0m 07.79s: option dvd2dvd 0 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 07.80s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 08.20s: Config ExBar successful.
0m 08.20s: dvd2dvd have 8 elements.
0m 08.33s: dvd2mobile have 31 elements.
0m 09.97s: blu-ray2blu-ray have 4 elements.
0m 10.02s: blu-ray2mobile have 20 elements.
0m 10.98s: blu-ray23d have 7 elements.
0m 11.27s: blu-ray2dvd have 1 elements.
0m 11.32s: file2mobile have 30 elements.
0m 13.04s: file2dvd have 1 elements.
0m 13.08s: file2bluray have 1 elements.
0m 13.72s: Config work ui controls successful.
0m 13.73s: Init burn engine successful.
0m 13.85s: StartNotify successful.
0m 14.03s: opening drive F
0m 14.26s: opened i/o
0m 14.26s: failed to detect media type
0m 14.27s: got max lba 1151
5m 49.96s: opening drive H
5m 49.96s: opened i/o
5m 49.97s: got media type 16
5m 49.97s: got max lba 11636351
5m 50.11s: type Blu-ray BDMV
5m 50.12s: volume label WRATH_OF_THE_TITANS
5m 50.18s: aacs 0 bd+ 0
5m 50.30s: got discinfo
5m 50.31s: got bdmv
5m 50.38s: got extended bdinfo
5m 50.38s: opened blu-ray
6m 43.36s: opening drive H
6m 43.36s: opened i/o
6m 43.36s: got media type 16
6m 43.36s: got max lba 11636351
6m 43.37s: type Blu-ray BDMV
6m 43.37s: volume label WRATH_OF_THE_TITANS
6m 43.41s: aacs 0 bd+ 0
6m 43.51s: got discinfo
6m 43.52s: got bdmv
6m 43.54s: got extended bdinfo
6m 43.55s: opened blu-ray
13m 10.03s: opening folder C:/Users/Glenn/Documents/DVDFab/Temp/MainMovie/WRATH_OF_THE_TITANS/BDMV/
13m 10.12s: got bdmv
13m 10.13s: got extended bdinfo


DVDFab 8.2.1.0 (2012/09/19 00:30:24)

0m 03.06s: GPUAccelerate: 3
0m 03.07s: CUDA cap: 0
0m 03.07s: Support coreavc decode: 0
0m 03.07s: Graphics info: ATI Radeon HD 4550 : :
0m 03.08s: Qt Translator file load success
0m 03.15s: Load config successful.
0m 03.24s: Init profile data driver sucessful.
0m 07.42s: Init GPU settings sucessful.
0m 07.42s: option dvd2dvd 0 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 07.43s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 07.84s: Config ExBar successful.
0m 07.85s: dvd2dvd have 8 elements.
0m 07.98s: dvd2mobile have 31 elements.
0m 09.44s: blu-ray2blu-ray have 4 elements.
0m 09.50s: blu-ray2mobile have 20 elements.
0m 10.43s: blu-ray23d have 7 elements.
0m 10.71s: blu-ray2dvd have 1 elements.
0m 10.76s: file2mobile have 30 elements.
0m 12.19s: file2dvd have 1 elements.
0m 12.23s: file2bluray have 1 elements.
0m 12.86s: Config work ui controls successful.
0m 12.87s: Init burn engine successful.
0m 13.00s: StartNotify successful.
0m 13.19s: opening drive F
0m 13.42s: opened i/o
0m 13.43s: failed to detect media type
0m 13.44s: got max lba 1151
0m 17.98s: opening drive H
0m 17.98s: opened i/o
0m 17.98s: got media type 16
0m 17.98s: got max lba 11636351
0m 18.00s: type Blu-ray BDMV
0m 18.00s: volume label WRATH_OF_THE_TITANS
0m 18.06s: aacs 0 bd+ 0
0m 18.16s: got discinfo
0m 18.17s: got bdmv
0m 18.19s: got extended bdinfo
0m 18.19s: opened blu-ray
1m 49.74s: opening folder C:/Users/Glenn/Documents/DVDFab/Temp/MainMovie/WRATH_OF_THE_TITANS/BDMV/
1m 49.80s: got bdmv
1m 49.81s: got extended bdinfo
6m 17.69s: Blu-ray Copy: Main Movie
6m 17.69s: Source: C:/Users/Glenn/Documents/DVDFab/Temp/MainMovie/WRATH_OF_THE_TITANS/BDMV/
6m 17.70s: Playlist: 0
6m 17.70s: Chapters: 1 -> 11
6m 17.70s: TotalSize: 14884 MB
6m 17.71s: SourceSize: 14884 MB
6m 17.71s: RemoveHDAudio: 0
6m 17.71s: CompressToAC3: 0
6m 17.72s: OutputSize: 46100 MB
6m 17.72s: OutputDisc: BDMV
6m 17.72s: OutputTarget: BD50
6m 17.72s: OutputVideo: 1080p/i
25m 32.98s: opening drive H
25m 33.04s: opened i/o
25m 33.04s: got media type 16
25m 33.04s: got max lba 7621567
25m 33.13s: type Blu-ray BDMV
25m 33.13s: volume label WRATH_OF_THE_TITANS


DVDFab 8.2.1.0 (2012/09/19 01:04:42)

0m 04.96s: GPUAccelerate: 3
0m 04.97s: CUDA cap: 0
0m 04.97s: Support coreavc decode: 0
0m 04.97s: Graphics info: ATI Radeon HD 4550 : :
0m 05.03s: Qt Translator file load success
0m 05.12s: Load config successful.
0m 05.35s: Init profile data driver sucessful.
0m 15.15s: Init GPU settings sucessful.
0m 15.16s: option dvd2dvd 0 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 15.17s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 15.56s: Config ExBar successful.
0m 15.57s: dvd2dvd have 8 elements.
0m 15.70s: dvd2mobile have 31 elements.
0m 17.32s: blu-ray2blu-ray have 4 elements.
0m 17.38s: blu-ray2mobile have 20 elements.
0m 18.37s: blu-ray23d have 7 elements.
0m 18.64s: blu-ray2dvd have 1 elements.
0m 18.70s: file2mobile have 30 elements.
0m 20.12s: file2dvd have 1 elements.
0m 20.16s: file2bluray have 1 elements.
0m 20.81s: Config work ui controls successful.
0m 20.83s: Init burn engine successful.
0m 20.96s: StartNotify successful.
0m 21.13s: opening drive F
0m 21.39s: opened i/o
0m 21.40s: failed to detect media type
0m 21.41s: got max lba 1151


DVDFab 8.2.1.0 (2012/09/19 01:19:12)

0m 02.72s: GPUAccelerate: 3
0m 02.72s: CUDA cap: 0
0m 02.72s: Support coreavc decode: 0
0m 02.74s: Graphics info: ATI Radeon HD 4550 : :
0m 02.75s: Qt Translator file load success
0m 02.81s: Load config successful.
0m 02.91s: Init profile data driver sucessful.
0m 07.10s: Init GPU settings sucessful.
0m 07.11s: option dvd2dvd 0 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 07.11s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 07.50s: Config ExBar successful.
0m 07.50s: dvd2dvd have 8 elements.
0m 07.63s: dvd2mobile have 31 elements.
0m 09.09s: blu-ray2blu-ray have 4 elements.
0m 09.14s: blu-ray2mobile have 20 elements.
0m 10.08s: blu-ray23d have 7 elements.
0m 10.36s: blu-ray2dvd have 1 elements.
0m 10.41s: file2mobile have 30 elements.
0m 11.85s: file2dvd have 1 elements.
0m 11.89s: file2bluray have 1 elements.
0m 12.52s: Config work ui controls successful.
0m 12.54s: Init burn engine successful.
0m 12.66s: StartNotify successful.
0m 12.84s: opening drive F
0m 13.06s: opened i/o
0m 13.07s: failed to detect media type
0m 13.08s: got max lba 1151
1m 28.73s: opening drive H
1m 28.73s: opened i/o
1m 28.74s: got media type 16
1m 28.74s: got max lba 11636351
1m 28.94s: type Blu-ray BDMV
1m 28.94s: volume label WRATH_OF_THE_TITANS
1m 29.02s: aacs 0 bd+ 0
1m 29.12s: got discinfo
1m 29.13s: got bdmv
1m 29.19s: got extended bdinfo
1m 29.19s: opened blu-ray
38m 47.76s: opening drive H
38m 47.76s: opened i/o
38m 47.76s: got media type 16
38m 47.77s: got max lba 11636351
38m 47.79s: type Blu-ray BDMV
38m 47.79s: volume label WRATH_OF_THE_TITANS
38m 47.90s: aacs 0 bd+ 0
38m 48.00s: got discinfo
38m 48.02s: got bdmv
38m 48.03s: got extended bdinfo
38m 48.04s: opened blu-ray
39m 18.40s: Blu-ray Copy: Full Disc
39m 18.40s: Source: H:/BDMV/
39m 18.40s: SourceSize: 22725 MB
39m 18.41s: RemoveHDAudio: 0
39m 18.41s: OutputSize: 46100 MB
39m 18.41s: OutputDisc: BDMV
39m 18.42s: OutputTarget: BD50
39m 18.42s: OutputVideo: 1080p/i
39m 18.42s: 3DMode: Blu-ray 3D

[Wilson.Wang]

Redo it follow these steps:
1. Create an ISO file from real disc by Clone module, it's a bd50 3D iso.
2. Open the cloned ISO file, and compress to bd25 iso with "Copy as 3D" option.
3. Play the bd25 ISO file on your player.

Hope this help you! Please tell us the result.

Wilson

[glenns]

Wilson:I have good news and bad news first the bad news the energizer bunny got arrested today for battery (really a American joke hope it translates to Chinese ok)

Now the good news YES WILSON IT WORKS i never knew fab could make a 3d movie from a 50 gig iso and reduce it to main movie in 2 steps first to a folder then turn it back to a 3d iso all in one process.At the end i was left with a 25 gig(22.5) 3d iso that i transferred from my computer drive to my 3T. ubs drive with windows and yes it now plays in both 2d and 3d.

Now what i don't understand is why i was able to get 3-4 movies on the drive doing it the way i told you i did it in the posts above and they played and still play in 3d and i can't do it again that way? Did something in fab or virtual drive change?

I really thank you so much i just want to know why this works and the way i did it doesn't i was driving myself crazy over this pulling out my hair spilling good beer on the floor etc.?

[glenns]

Wilson also just to let you know i burned a disk from this same reduced iso but i had to use img burn as fab burner says the file is too big to burn on a 25 gig disk it came in at 24472384 just a little to big for the 25 gig disk.I put it in img. burn and got the too big file also but i just used (burn to end of disk option) and it came out fine and in 3d.The fab compression engine still needs work so we can burn 50 gig disks on 25 gig disks the files are just a tad too big for the 25 gig disks and that's why fab is asking for a double layered disk when converting.Thanks one again.

[Wilson.Wang]

Now what i don't understand is why i was able to get 3-4 movies on the drive doing it the way i told you i did it in the posts above and they played and still play in 3d and i can't do it again that way? Did something in fab or virtual drive change?

.I only know i have reduced 4 or 5 50 gig movies to main movie 3d with fab then made a Iso file from the fab 3d files using img burn and transfered it over that way but now it won't work all i get is a 2d movie.

The step is wrong! Did you output to a folder when you compress main movie, and then create an ISO by ImgBurn directly?
Yes, it's 3D movie when mount the .miniso, but dont have .ssif file in the ISO file if you create iso from the output folder by ImgBurn directly.
If you want to create an ISO from the outputed folder, please set DVDFab burning engine in Common Setting, and use the Write Data to create ISO file.

For the folder source, you should mount the miniso file and then select "Copy as 3D" option. The result will be 3D.

Did something in fab or virtual drive change?

Not have big changes for 3D compression.

Wilson

[glenns]

Wilson:The lion of judah 3d after i unchecked the HD audio Fab didn't need to compress main movie.I put the 50 gig iso in fab main movie outputted a iso burned it to 25 gig disk it played in 3d fine but i really don't want to burn disks anymore i want to put the Fab made iso on my second 3t drive so my media player can play it so i transferred it over using windows and it doesn't play in 3d but the same iso made the 25 gig disk that plays in 3d even on a PlayStation.Is their a different step to take when the main movie doesn't need compressing? I tried it with 50 and 25 gig output as it didn't need to be compressed just the hd audio from hd dts to dts.?

Also can i use my media players ubs hard drive where all the 50 gig iso's are on when making a 3d 50 gig to 25 gig iso or does the 50 gig iso have to be on the computers hard drive to make the iso's?

Should I try outputting the fab made iso to the media players hard drive so i don't have to transfer the fab made iso over after its outputted on the computers harddrive?



DVDFab 8.2.1.1 (2012/09/22 01:44:32)

0m 02.87s: GPUAccelerate: 3
0m 02.87s: CUDA cap: 0
0m 02.87s: Support coreavc decode: 0
0m 02.87s: Graphics info: ATI Radeon HD 4550 : :
0m 02.87s: Qt Translator file load success
0m 02.95s: Load config successful.
0m 03.04s: Init profile data driver sucessful.
0m 07.16s: Init GPU settings sucessful.
0m 07.16s: option dvd2dvd 0 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 07.17s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 07.55s: Config ExBar successful.
0m 07.55s: dvd2dvd have 8 elements.
0m 07.68s: dvd2mobile have 31 elements.
0m 09.09s: blu-ray2blu-ray have 4 elements.
0m 09.14s: blu-ray2mobile have 20 elements.
0m 10.04s: blu-ray23d have 7 elements.
0m 10.31s: blu-ray2dvd have 1 elements.
0m 10.35s: file2mobile have 30 elements.
0m 11.73s: file2dvd have 1 elements.
0m 11.76s: file2bluray have 1 elements.
0m 12.36s: Config work ui controls successful.
0m 12.40s: Init burn engine successful.
0m 12.51s: StartNotify successful.
0m 12.69s: opening drive F
0m 12.93s: opened i/o
0m 12.93s: failed to detect media type
0m 12.95s: got max lba 1151
0m 33.16s: opening iso C:/Users/Glenn/Documents/DVDFab/Temp/clone 2/LION_OF_JUDAH 3d.iso
0m 33.16s: got media type 15
0m 33.18s: got max lba 20591359
0m 33.23s: type Blu-ray BDMV
0m 33.23s: volume label LION_OF_JUDAH
0m 53.11s: opening iso C:/Users/Glenn/Documents/DVDFab/Temp/clone 2/LION_OF_JUDAH 3d.iso
0m 53.11s: got max lba 20591359
0m 53.12s: aacs 0 bd+ 0
0m 53.15s: got discinfo
0m 53.16s: got bdmv
0m 53.33s: got extended bdinfo
0m 53.33s: opened blu-ray
2m 08.89s: Blu-ray Copy: Main Movie
2m 08.89s: Source: [:/BDMV/
2m 08.89s: Playlist: 98
2m 08.89s: Chapters: 1 -> 10
2m 08.89s: TotalSize: 24983 MB
2m 08.89s: SourceSize: 24983 MB
2m 08.89s: RemoveHDAudio: 1
2m 08.89s: CompressToAC3: 0
2m 08.89s: OutputSize: 46100 MB
2m 08.89s: OutputDisc: BDMV
2m 08.89s: OutputTarget: BD50
2m 08.89s: OutputVideo: 1080p/i
2m 08.89s: 3DMode: Blu-ray 3D
2m 08.90s: info: enable bd copy(mode=1)
2m 08.90s: info: streams(4113.1,4352.4)
2m 08.90s: info: blu-ray copy begin (unit[elem[atomic[00069.ssif]]])
2m 08.91s: info: processing source(00069.ssif)