Haunting in Connecticut will not copy

[Phleddd]

I can't find any firmware for this drive.

[Phleddd]

That is an internal drive. It is a LG Black 12X BD-R 2X BD-RE 16X DVD+R 12X DVD-RAM 10X BD-ROM 4MB Cache SATA 12X Super Multi Blue with 3D Playback & M-DISC Support WH12LS39 (from Newegg order page)

It has 1.00D firmware. I am looking for a newer version. After this issue I tried an external drive on several computers and had the same issue.

[fengtao]

Haunting in Connecticut Blu-ray was released at 2009, so it should not contain any new protection, I think the problem is caused by the drive, can you try to open it on a PC with an internal drive?

[Phleddd]

I have never had this issue before and have successfully archived several disks since this started with this one including the Raven yesterday.

I will check for a firmware or driver update.

I have a USB BD reader for my mac air that experienced the same issue on four different machines.

Thanks

[Wilson.Wang]

DVDFab 8.2.1.5 (2012/10/12 03:04:37)

0m 01.71s: GPUAccelerate: 12345
0m 01.71s: CUDA cap: 0
0m 01.71s: Support coreavc decode: 0
0m 01.71s: Graphics info: NVIDIA GeForce GTS 250 : 4.20 : 1.1
0m 01.71s: Qt Translator file load success
0m 01.77s: Load config successful.
0m 02.02s: Init profile data driver sucessful.
0m 06.25s: Init GPU settings sucessful.
0m 06.25s: option dvd2dvd 0 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 06.27s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 06.63s: Config ExBar successful.
0m 06.63s: dvd2dvd have 8 elements.
0m 06.77s: dvd2mobile have 31 elements.
0m 08.07s: blu-ray2blu-ray have 4 elements.
0m 08.11s: blu-ray2mobile have 20 elements.
0m 08.96s: blu-ray23d have 7 elements.
0m 09.19s: blu-ray2dvd have 1 elements.
0m 09.24s: file2mobile have 30 elements.
0m 10.50s: file2dvd have 1 elements.
0m 10.53s: file2bluray have 1 elements.
0m 11.16s: Config work ui controls successful.
0m 11.30s: Init burn engine successful.
0m 11.38s: StartNotify successful.
6m 59.78s: opening drive D
6m 59.78s: opened i/o
6m 59.80s: got media type 15
7m 00.22s: got disc type 0
7m 00.22s: got max lba 24384351
7m 05.19s: type Blu-ray BDMV
7m 05.19s: volume label HAUNTING_IN_CT
7m 05.23s: opening drive D
7m 05.23s: opened i/o
7m 35.44s: got disc type 0
7m 35.44s: got max lba 24384351

Is it possable caused the issue by the BD-ROM connection? It should be only have one "Opening driver X" when reading real disc normally. Maybe the BD-ROM connection is disconnected but connected again when reading the disc. The connection is not stable.
Just a guess, please update your driver of BD-ROM and have try again.
How about other discs? or only this disc could not be opened?

Wilson

[CBR929]

Fair enough

[Phleddd]

I wanted to copy it before my kids took it on a trip and don't have any more interest in it.

[CBR929]

I no longer have the disk so it does not matter

Hi Phleddd
Enlighten me as to why do you no longer have the disc???
I can not remember never being able to copy a disc that I got rid of it.
CBR929

[Phleddd]

The picture disappeared. I uploaded it again.

[QUOTE=Phleddd;124854]I posted the log. It never opens the disk.

The last time I tried it was back to not knowing what it was.

[Phleddd]

Does your media center PC have a viable internet connection? Even if you no longer have the disc it might benefit others if you could find the DVDFab internal log from one of the attepmts to copy it and post it here.

I posted the log. It never opens the disk.

The last time I tried it was back to not knowing what it was.

[signals]

Does your media center PC have a viable internet connection? Even if you no longer have the disc it might benefit others if you could find the DVDFab internal log from one of the attepmts to copy it and post it here.

[Phleddd]

I was offered two suggestions which while appreciated were not the issue.

I followed the suggestion of installing UDF, posted my results and waited as I still am.

I no longer have the disk so it does not matter.


Thanks

[signals]

I think they need to get the disc, which can take some time in Beijing. You have received support from the DVDFab Staff.

[Phleddd]

I gave up on this disk. Am I to expect virtually no real support? I paid for a 2 year license thinking support came with it.

[Phleddd]

I installed UDF, same thing. With another disk, (The Others) it immediately sees it and asks for region choice.