BD wont burn

[CBR929]

Hi dave79
Not sure if this will help, but your drives firmware is behind in updates.
You will find the latest firmware here

NOTE: If you do not know how to flash your drive do not do it, it will render your drive useless.

Have you also tried the DVD Fab burn engine or ImgBurn which can be found in the link in my signature and instructions on setting it up with Fab.
CBR929

[dave79]

ImgBurn did it. I burnt and played Green Lantern. Thank you so much CBR929 you the MAN!

[dave79]

It just did it again. After it let me burn 1 movie no problem ImgBurn is not working. Here is the ImgBurn Log.



ImgBurn Version 2.5.7.0 - Log
Friday, 14 December 2012, 22:07:44



22:05:10 ImgBurn Version 2.5.7.0 started!
22:05:10 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7601 : Service Pack 1)
22:05:10 Total Physical Memory: 8,364,900 KB - Available: 5,011,512 KB
22:05:10 Initialising SPTI...
22:05:10 Searching for SCSI / ATAPI devices...
22:05:10 -> Drive 1 - Info: ASUS BC-12B1ST 1.01 (D (ATAPI)
22:05:10 -> Drive 2 - Info: ATAPI iHBS112 2 CL0K (G (SATA)
22:05:10 Found 1 BD-ROM/DVD±RW and 1 BD-RE!
22:07:44 Close Request Acknowledged
22:07:44 Closing Down...
22:07:44 Shutting down SPTI...
22:07:44 ImgBurn closed!



ImgBurn Version 2.5.7.0 - Log
Friday, 14 December 2012, 22:04:13



22:02:54 ImgBurn Version 2.5.7.0 started!
22:02:54 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7601 : Service Pack 1)
22:02:54 Total Physical Memory: 8,364,900 KB - Available: 4,825,380 KB
22:02:54 Initialising SPTI...
22:02:54 Searching for SCSI / ATAPI devices...
22:02:54 -> Drive 1 - Info: ASUS BC-12B1ST 1.01 (D (ATAPI)
E 22:02:56 Device->Initialise() Failed!
E 22:02:56 Device: [2:0:0] ATAPI iHBS112 2 CL0K (G (SATA)
E 22:02:56 This drive is currently locked for exclusive access by 'ImgBurn v2.5.7.0 - PID: 1308'.
E 22:02:56 Device->Initialise() Failed!
E 22:02:56 Device: [2:0:0] ATAPI iHBS112 2 CL0K (G (SATA)
E 22:02:56 This drive will not be visible in the program.
22:02:56 Found 1 BD-ROM/DVD±RW!
22:04:13 Close Request Acknowledged
22:04:13 Closing Down...
22:04:13 Shutting down SPTI...
22:04:13 ImgBurn closed!



ImgBurn Version 2.5.7.0 - Log
Friday, 14 December 2012, 20:10:11



20:08:28 ImgBurn Version 2.5.7.0 started!
20:08:28 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7601 : Service Pack 1)
20:08:28 Total Physical Memory: 8,364,900 KB - Available: 5,585,464 KB
20:08:28 Initialising SPTI...
20:08:28 Searching for SCSI / ATAPI devices...
20:08:28 -> Drive 1 - Info: ASUS BC-12B1ST 1.01 (D (ATAPI)
20:08:28 -> Drive 2 - Info: ATAPI iHBS112 2 CL0K (G (SATA)
20:08:28 Found 1 BD-ROM/DVD±RW and 1 BD-RE!
20:10:11 Close Request Acknowledged
20:10:11 Closing Down...
20:10:11 Shutting down SPTI...
20:10:11 ImgBurn closed!



ImgBurn Version 2.5.7.0 - Log
Friday, 14 December 2012, 19:25:36



19:22:19 ImgBurn Version 2.5.7.0 started!
19:22:19 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7601 : Service Pack 1)
19:22:19 Total Physical Memory: 8,364,900 KB - Available: 5,371,080 KB
19:22:19 Initialising SPTI...
19:22:19 Searching for SCSI / ATAPI devices...
19:22:19 -> Drive 1 - Info: ASUS BC-12B1ST 1.01 (D (ATAPI)
19:22:19 -> Drive 2 - Info: ATAPI iHBS112 2 CL0K (G (SATA)
19:22:19 Found 1 BD-ROM/DVD±RW and 1 BD-RE!
19:25:36 Close Request Acknowledged
19:25:36 Closing Down...
19:25:36 Shutting down SPTI...
19:25:36 ImgBurn closed!

[CBR929]

Hi dave79
Are you sure that the disc you are trying to burn is empty?
It is hard from the screen shot to tell what type of discs your using.
Could you post a complete burn log from the Green Lantern?
Thanks
CBR929