A Very Harold and Kumar Christmas 3D error

[theheadsn]

Hey guys, I've tried 3 times now to BluRay Clone "A Very Harold and Kumar Christmas 3D" and so far a no go. First 2 times it went to 3 percent then stopped, and this past time it went to 1 percent and did the same. Here is my log for you guys to check out. I updated my firmware on my Bluray drive, and updated from my last version of dvdfab to this 9.0.6.0 and the same problems. Im wondering if its just my bluray drive that could be giving me problems

DVDFab 9.0.6.0 (2013/10/11 00:08:04)

0m 00.09s: Start preload dll...
0m 00.12s: Load dll successful.
0m 00.12s: Start load fabplay dll...
0m 00.17s: Load fabplay dll successful.
0m 00.17s: Windows os type is: 13.
0m 00.17s: Transfer settings successful.
0m 00.42s: GPUAccelerate: 12351
0m 00.43s: CUDA cap: 1
0m 00.43s: Support coreavc decode: 0
0m 00.43s: Graphics info: NVIDIA GeForce GTX 680 : 6.0 : 3.0
0m 00.43s: Load config successful.
0m 00.46s: Option check status: Failed
0m 00.46s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1
0m 00.46s: Start get sys number.
0m 00.46s: Serial number is: 30-85-a9-98-4c-fb
0m 00.46s: Init GPU settings sucessful.
0m 00.46s: Reg URL link is: https://www.dvdfabstore.com/auth/v2/
0m 00.46s: Version is: 9060
0m 00.46s: Product is: 2
0m 00.48s: Connect type is: 1
0m 00.46s: CommmandLine:
0m 00.78s: Begin init preview play engine.
0m 00.78s: Init DirectShow engine successful.
0m 01.15s: Profile Manager :: End Load Profile
0m 01.18s: Times of connecting error is: 0
0m 01.18s: Parse string is: OV:9063
0m 01.18s: Parse string is: BV:9069
0m 01.20s: Option check status: NewWork
0m 01.20s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1
0m 03.66s: Init burn engine successful.
0m 05.30s: Get update info start
0m 05.30s: Product type is: 2
0m 05.32s: Version is: 9063
0m 05.32s: URL link is: http://www.dvdfabstore.com/update/
0m 05.32s: Language type is: ENU
0m 05.32s: opening drive D
0m 05.32s: opened i/o
0m 05.33s: got media type 15
0m 05.71s: Update version: 1.0
0m 05.71s: Status is: 1
0m 05.71s: Download url: http://www.dvdfab.com/mlink/download.php?g=DVDFAB9
0m 05.72s: Version Data:
0m 06.77s: got max lba 15536255
0m 07.73s: got disc type 20
0m 07.73s: type Blu-ray BDMV
0m 07.73s: volume label VERY_HAROLD_AND_KUMAR
0m 07.75s: opening drive F
0m 07.75s: opened i/o
0m 07.78s: internal path D:/BDMV/
0m 07.84s: aacs 1 bd+ 0
0m 08.21s: got bdmv
0m 08.26s: movie name: a very harold and kumar 3d christmas||very_harold_and_kumar
0m 08.26s: got agid 0
0m 08.31s: sent host cert chal
0m 08.31s: got drive cert chal
0m 08.31s: BEC 1
0m 08.32s: DRIVE_VENDOR 0x0074
0m 08.37s: got drive key
0m 08.37s: got host key signature
0m 08.39s: verified drive signature
0m 08.39s: verified host signature
0m 08.45s: sent host signature and key point
0m 08.45s: got bus key
0m 08.59s: got volume id
0m 08.59s: got volume id mac
0m 08.59s: volume id is correct
0m 08.59s: got vid
0m 08.81s: blu-ray 299D0852F59993C4E04ADC5B2B253AE8FAB23E40
0m 09.37s: cert BEE=0x00 same
0m 11.04s: D ECCD034B
0m 11.07s: got vuk
0m 11.37s: got unit key 1
0m 13.89s: got bdmv
0m 15.95s: got extended bdinfo
0m 15.95s: opened blu-ray
2m 22.85s: read error: 11 168813 175340 174366 63
3m 24.40s: read error: 11 168813 175340 174189 63

[geilee]

0m 15.95s: opened blu-ray
2m 22.85s: read error: 11 168813 175340 174366 63
3m 24.40s: read error: 11 168813 175340 174189 63

Hi,theheadsn
It‘s read errors, please clean the disc and try again, you may have a bad disc.
Please update to the latest version v9.0.7.0 try again.

[theheadsn]

Ya Im thinking it was the disk, at least with my drive. Seems the KIND of disc that it is too might be an issue. The almost clear looking bluray disc, Kung Fu Panda 2 is the same way, and I ran into the same problem around the 87% mark. I tried upgrading to 9.0.7.0 but was getting the "update to read disc" problem that a lot of people were running into

[glenns]

The clear disk is not the problem your disk may have scratches and they cause read error's.First download the new 9071 version they corrected the update issue in 9070 but just a few days ago so they put up a new version of 9070 but now have 9071 up.

Then make sure the disk is clean of all fingerprints and dirt and try again.If their are deep scratches your just not going to be able to copy it even if it plays well.The read errors are 2-3 mins. into the disk that plays from the inside near the disk hole outwards toward the rim of the disk so near the start I would look for scratches if their and you can't buff them out then that's the problem.I have both these disks and had no problems with making iso's or converting them to another format.

If you have a cleaning disk sometimes the laser lens gets dirty and needs cleaning this will cause read errors also.