How to Restart DVDFab Blu-ray after disk error/

[sealion]

I have had a few disk errors during the burn step. My only choice with DVDFab is retry or cancel. If I cancel I have to rip the Blu-ray again. This is a loss of time and CPU cycles on my SSD. Why is there not an option to burn again (after a burn failure) instead of re-ripping. I already have the image. As a matter of fact I get a warning message that I am about to overwrite it when I restart. What other choice do I have?

[90312]

There are a couple ways to go at this, first and best way in my opinion is to rip the movie to the HDD and burn it from ImgBurn. It will be on the HDD until you get a good burn.

Second is to uncheck the box (see attachment) and you can burn it from the temp directory. This way you'll have to remember to delete them or you'll eat your HDD pretty quickly.

[glenns]

If I were you I would be more concerned what caused the burn error's and what type they are.

If you used a cheap blank disk that your burner doesn't want to burn to like so many people have trouble with Ritec or company's that rebrand their disks like Memorex that are really made by Ritec.

This is why you should always post a internal and burn log (cut and paste) for the disk you have trouble with to a post here.
See the link in the bottom of the post on how to post these logs.

If one burner see's error's theirs a good chance other's will also.The log will show us burning speed also.Many people burn way to fast burn at 1/2 the disks rated speed.

The internal logs tell us a lot also such as if their were any read error's when you put the disk on the hard drive as they will also cause burn error's.

The log will tell us you firmware version that your burner is using many people don't know that company's make new firmware for their drives so more different brands of disks sometimes will be supported with the update as well as other improvements to the burner.

These are just a few things log files tell us.

[sealion]

Interesting.
More that half of my errors are because when it goes to the burn phase a
window pops up that asks the burn speed. It shows 2x with a check box if I want to keep this as the default. 2X is what I want so I check it. Next time I get to the burn stage it pops up again as if I did not select it as the default. I check it again. Here is the rub. If I get to the burn stage and pop the DB-R in the drive, while I am waiting of the disk to be recognized, if I get distraced (like a phone call) I miss the pop up. It starts to burn and gets up to about 7X and disk error. I have lost quite a few this way.
As to the quality of the disks. It the expensive JVCs that I have the most problems with. Today when I poped the disk in, I responded to the pop up. The JVC disk started to initalize, then write error on the open. I look at the log, it indicated to target disk did not have enough space. I look at it under windows, 0 bytes available. Another coaster.

[glenns]

If you want help you must post the burn log file and the internal file everything else is just a guess.

We can see things in the log you won't understand so please post them so we can see why the file is to big to burn it may be a simple setting or can be a bug in the program that needs fixing.We already know if your using blu ray to dvd that theirs a file to big to fit disk problem that needs fixing.2x burn speed may not be a available disk speed for your brand of disks and player.Again log files tell us.

[90312]

sealion, go into common settings and go here, set the burn speed and you will not need to attend so closely it will burn at the speed you select. See attached: Click OK when finished selecting the burn speed.

[sealion]

90312,

Thanks for your kind updates.

I do have the default set for 2X, However I still get the popup window.
If I do not respond to it, it acts like I want the 'Fastest'.

As far as the temp file goes. I have it. It does not delete if I cancel.
But DVDFab Blu-ray Copy does not let me select it to burn. I have to start from the source DVD and rip it again. I think DVDFab should let me select this file as input, since DVDFab created it and would use it if I wanted a 2nd copy.


glenns,

Thanks for time.

here are the logs you requested.
Hope they help.
I have burned many BD-R disks with my drive without issue.
I mainly have a problem with these JVC 'Professional' grade disks.
The cheeper TDK and Memorex don't give me as many problems.
However having to restart DVDFab and lose the time and ware on my SSD is more frustrating.

Internal Log:

DVDFab 9.1.1.9 (2013/12/31 04:40:46)

0m 00.18s: Start preload dll...
0m 00.19s: Load dll successful.
0m 00.19s: Start load fabplay dll...
0m 00.24s: Load fabplay dll successful.
0m 00.24s: Transfer settings successful.
0m 00.25s: info: fabcheck logpath= C:/Users/John_I7/Documents/DVDFab9/Log/
0m 00.26s: fab_check_gpu is running ...
0m 00.95s: fab_check_gpu run successful
0m 00.96s: info: recommand= 0, Shrink support= 0, enable= 0, cuda_cap= 0 , cpu_count= 8
0m 00.96s: GPUAccelerate: 451
0m 00.96s: GPUAccelerate setting: 0, 0
0m 00.96s: CUDA cap: 0
0m 00.96s: Support coreavc decode: 0
0m 00.96s: Lighting shrink status: 0, 0
0m 00.96s: Graphics info: AMD Radeon HD 5700 Series : :
0m 00.96s: Load config successful.
0m 00.96s: Windows os type is: 13.
0m 01.20s: Parse string is: 2:8260762964
0m 01.20s: Parse string is: 20:1439329020
0m 01.20s: Parse string is: 1:0
0m 01.20s: Parse string is: 62:0
0m 01.20s: Parse string is: OV:9119
0m 01.20s: Parse string is: BV:9118
0m 01.20s: Parse string is: S:bd53ad80ec24f67c1b83464c011be3e4
0m 01.20s: Option check status: Local
0m 01.20s: HD Decrypter-1-0-215811
0m 01.20s: DVD to DVD (Gold)-0-0-200011
0m 01.20s: DVD to DVD-1-1-22311011
0m 01.21s: DVD to Mobile-0-0-200011
0m 01.21s: Blu-ray to Blu-ray-1-1-2015812
0m 01.21s: Blu-ray to Mobile-0-0-200011
0m 01.21s: File to Mobile-0-0-200011
0m 01.21s: Blu-ray to DVD-0-0-200011
0m 01.21s: File to DVD-0-0-200011
0m 01.21s: File to Blu-ray-0-0-200011
0m 01.21s: File Mover-1-0-215811
0m 01.21s: Blu-ray to 3D-0-0-200011
0m 01.21s: 2D to 3D-0-0-200011
0m 01.21s: Blu-ray Decrypt-1-0-200011
0m 01.21s: DVD Decrypt-1-0-200011
0m 01.21s: Start get sys number.
0m 01.21s: connect 0 : start.
0m 01.21s: Serial number is: c0-cb-38-88-01-dd:c0-cb-38-88-01-dd:78-2b-cb-94-67-94
0m 01.21s: Reg URL link is:
0m 01.21s: Version is: 9119
0m 01.21s: Product is: 2
0m 01.21s: Connect type is: 0
0m 01.54s: Init GPU settings successful.
0m 01.54s: CommmandLine:
0m 01.67s: Begin init preview play engine.
0m 01.92s: Times of connecting error is: 0
0m 01.92s: Parse string is: 2:8260762964
0m 01.92s: Parse string is: 20:1439329020
0m 01.92s: Parse string is: 1:0
0m 01.92s: Parse string is: 62:0
0m 01.92s: Parse string is: OV:9119
0m 01.92s: Parse string is: BV:9118
0m 01.92s: Parse string is: S:aae562f328dff9dc00930f3bf2a947e3
0m 01.92s: Option check status: NewWork
0m 01.92s: HD Decrypter-1-0-215811
0m 01.92s: DVD to DVD (Gold)-0-0-200011
0m 01.92s: DVD to DVD-1-1-22311011
0m 01.92s: DVD to Mobile-1-0-215811
0m 01.92s: Blu-ray to Blu-ray-1-1-2015812
0m 01.92s: Blu-ray to Mobile-1-0-215811
0m 01.92s: File to Mobile-1-0-215811
0m 01.92s: Blu-ray to DVD-1-0-215811
0m 01.92s: File to DVD-1-0-215811
0m 01.92s: File to Blu-ray-0-0-200011
0m 01.92s: File Mover-1-0-215811
0m 01.92s: Blu-ray to 3D-1-0-215811
0m 01.92s: 2D to 3D-1-0-215811
0m 01.92s: Blu-ray Decrypt-1-0-200011
0m 01.92s: DVD Decrypt-1-0-200011
0m 01.94s: Profile Manager :: End Load Profile
0m 02.31s: Init internal engine successful.
0m 02.46s: connect 0 : 1:1-10:1-11:1-12:1-13:1-14:1-15:1-
0m 02.60s: Burn engine: start init.
0m 05.32s: Burn engine: type-0.
0m 05.32s: Burn engine: 0- E:\ [HL-DT-ST DVD+-RW GH50N B104 (Ide)].
0m 05.32s: Burn engine: 1- F:\ [Optiarc BD RW BD-5300S 1.04 (Ide)].
0m 05.32s: Burn engine: end init.
0m 05.64s: Init setting page successful.
0m 15.36s: Init driveX with I/O mode: 0
0m 15.36s: Init driveX with I/O mode: 0
0m 15.36s: Init driveX with I/O mode: 0
0m 15.37s: opening drive E
0m 15.37s: opened i/o
0m 15.37s: got media type 1
0m 15.72s: got max lba 226005
0m 17.82s: got disc type 0
0m 17.84s: opening drive H
0m 17.84s: opened i/o
0m 17.85s: got max lba 342015
0m 18.32s: got disc type 0
0m 18.33s: opening drive F
0m 18.34s: opened i/o
43m 52.10s: opening drive F
43m 55.67s: opened i/o
43m 55.68s: got media type 15
43m 56.18s: got max lba 22404543
44m 00.53s: got disc type 20
44m 00.53s: type Blu-ray BDMV
44m 00.53s: volume label THE_WOLVERINE
44m 00.54s: Open blu-ray disc expired time: 215811
44m 00.55s: opening drive F
44m 00.55s: opened i/o
44m 00.93s: got max lba 22404543
44m 02.01s: got disc type 20
44m 02.01s: internal path F:/BDMV/
44m 04.06s: aacs 1 bd+ 1
44m 04.46s: got bdmv
44m 04.69s: movie name: the wolverine||the_wolverine
44m 04.70s: got agid 0
44m 04.76s: sent host cert chal
44m 04.76s: got drive cert chal
44m 04.76s: BEC 0
44m 04.76s: DRIVE_VENDOR 0x0128
44m 04.84s: got drive key
44m 04.84s: got host key signature
44m 04.84s: verified drive signature
44m 04.84s: verified host signature
44m 04.92s: sent host signature and key point
44m 04.92s: got bus key
44m 07.01s: got volume id
44m 07.02s: got volume id mac
44m 07.02s: volume id is correct
44m 07.02s: got vid
44m 07.95s: blu-ray FF3C09269535CB4C272E5D63151567757A296BD3
44m 08.47s: cert BEE=0x80 same
44m 09.74s: D E387174A
44m 32.29s: main playlist 00800.mpls
44m 32.29s: selected region A
44m 55.14s: got vuk
44m 55.14s: got fut
44m 57.46s: got unit key 7
45m 14.40s: got bdmv
45m 19.14s: got extended bdinfo
45m 19.14s: opened blu-ray
46m 49.03s: UILog:OnMsgToolbar_Start
46m 49.03s: UILog:Msg Start : ready start
46m 49.04s: UILog:Msg Start : start test run work
46m 49.04s: UILog:right button to null, work falg = -1
46m 49.05s: UILog:Msg Start : run work
46m 49.05s: UILog:Run current Work.
46m 49.34s: UILog:Begin work copy or converter.
46m 49.34s: UILog:start running at thread.
46m 49.35s: UILog:return flag at start running at thread ok.
46m 49.42s: BD MainMovie watermark flag: 0
46m 49.42s: UILog:MsgWork:WorkStatus_Start
47m 48.18s: Blu-ray Copy: Main Movie
47m 48.18s: Source: F:/BDMV/
47m 48.18s: Playlist: 800
47m 48.18s: Chapters: 1 -> 37
47m 48.18s: TotalSize: 36618 MB
47m 48.18s: SourceSize: 35280 MB
47m 48.18s: RemoveHDAudio: 0
47m 48.19s: CompressToAC3: 0
47m 48.19s: OutputSize: 23000 MB
47m 48.19s: OutputDisc: BDMV
47m 48.19s: OutputTarget: BD25
47m 48.19s: OutputVideo: 1080p/i
47m 48.19s: info: enable bd copy(mode=0)
47m 48.19s: info: estimate copied other streams size(6041 MB), estimate output video size(16728 MB)
47m 48.19s: info: video encode mode(0), bitrate(17756), lr-encode(yes)
47m 48.19s: info: streams(4113.2)
47m 48.19s: info: blu-ray copy begin (unit[elem[atomic[00800.m2ts]]])
47m 48.19s: Lightning-Recoding (accelerate H.264 software decoding and encoding) enabled
47m 48.19s: info: enable multi-thread software decoder, thread count = 8
47m 49.21s: info: h264_encode: encode param profile(2) level(41) bitrate(17756) crf(-1)
47m 53.23s: info: processing source(00800.m2ts)
84m 55.07s: info: group(elem[atomic[00800.m2ts]]) playtime(7568561 ms) source(36618 MB) request(22770 MB) real(22308 MB) bitrate(17756 kbps)
84m 55.09s: compress finished: groups request(22770 MB, 22770 MB) real(22308 MB) average_bitrate(17756 kbps)
85m 01.60s: UILog:MsgWork:WorkStatus_Start
85m 15.74s: opening drive F
85m 15.74s: opened i/o
126m 18.01s: Burn data size is: 23000
126m 18.02s: Burn disc space is: 23866
126m 26.40s: burn folder C:/Users/John_I7/Documents/DVDFab9/Temp/MainMovie/THE_WOLVERINE/ with DVDFab
135m 47.04s: UILog:OnMsgToolbar_Pause
135m 58.88s: terminate process
135m 59.93s: Preview log : pfn_releaseplayer end
135m 59.98s: Preview log : pfn_deinit end
135m 59.99s: Preview log : FreeLibrary end


dvdfab_burn_vso.log :

Note no entry for today

2013-12-24 16:03:55 ---- ******************** Log session stop 24-Dec 16:03:55.520 PID 7328********************
2013-12-24 13:31:00 Info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVDRAM, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R, Blu Ray-R Seq., Blu Ray-R Rnd., Blu Ray-RE
2013-12-24 13:31:00 Info Drive has Serial ATA physical interface
2013-12-24 13:31:00 Info New Drive selected : 2:0:0 - Optiarc BD RW BD-5300S 1.04 [F] (Ide)
2013-12-24 13:31:00 Info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVDRAM, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R
2013-12-24 13:31:00 Info Drive has IDE-ATAPI physical interface
2013-12-24 13:31:00 Info New Drive selected : 1:0:0 - HL-DT-ST DVD+-RW GH50N B104 [E] (Ide)
2013-12-24 13:31:00 Info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVDRAM, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R, Blu Ray-R Seq., Blu Ray-R Rnd., Blu Ray-RE
2013-12-24 13:31:00 Info Drive has Serial ATA physical interface
2013-12-24 13:31:00 Info New Drive selected : 2:0:0 - Optiarc BD RW BD-5300S 1.04 [F] (Ide)
2013-12-24 13:31:00 Info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVDRAM, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R
2013-12-24 13:31:00 Info Drive has IDE-ATAPI physical interface
2013-12-24 13:31:00 Info New Drive selected : 1:0:0 - HL-DT-ST DVD+-RW GH50N B104 [E] (Ide)
2013-12-24 13:31:00 Info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVDRAM, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R, Blu Ray-R Seq., Blu Ray-R Rnd., Blu Ray-RE
2013-12-24 13:31:00 Info Drive has Serial ATA physical interface
2013-12-24 13:31:00 Info New Drive selected : 2:0:0 - Optiarc BD RW BD-5300S 1.04 [F] (Ide)
2013-12-24 13:31:00 Info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVDRAM, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R
2013-12-24 13:31:00 Info Drive has IDE-ATAPI physical interface
2013-12-24 13:31:00 Info New Drive selected : 1:0:0 - HL-DT-ST DVD+-RW GH50N B104 [E] (Ide)
2013-12-24 13:31:00 Info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVDRAM, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R, Blu Ray-R Seq., Blu Ray-R Rnd., Blu Ray-RE
2013-12-24 13:31:00 Info Drive has Serial ATA physical interface
2013-12-24 13:31:00 Info New Drive selected : 2:0:0 - Optiarc BD RW BD-5300S 1.04 [F] (Ide)
2013-12-24 13:31:00 Info Current Drive selected : 1:0:0 - HL-DT-ST DVD+-RW GH50N B104 [E] (Ide)
2013-12-24 13:31:00 Info Using Advanced SPTI interface
2013-12-24 13:31:00 Info System default language : English (United States)
2013-12-24 13:31:00 Info User default language : English (United States)
2013-12-24 13:31:00 Info DLL Version : 4.0.21.489
2013-12-24 13:31:00 Info DLL : C:\Program Files (x86)\DVDFab 9\vso_hwe.dll
2013-12-24 13:31:00 Info Version : 9, 1, 1, 9
2013-12-24 13:31:00 Info ExeName : C:\Program Files (x86)\DVDFab 9\DVDFab.exe
2013-12-24 13:31:00 Info OS : Microsoft Windows 7 Professional (Build 7601: Service Pack 1)
2013-12-24 13:31:00 ---- ******************** Log session start 24-Dec 13:31:00.480 PID 7328********************

[sealion]

glenns,

I need more room, so here is the rest

dvdfab_burn.log:
No entry for today

Burn Folder 2013-12-24 14:45:55 -----------------------------------------------

14:45:55 Info RootDir: C:/Users/John_I7/Documents/DVDFab9/Temp/MainMovie/JOBS/

14:45:55 Info VolumeName: JOBS
14:45:55 Info WriteMode: 4
14:45:55 Info Lock media
14:45:55 Info Operation Started!
14:45:55 Info Source File Size: 21895 MB
14:46:24 Info Writing LeadIn...
14:46:24 Info Write started 11210368 sectors to write
15:07:43 Info Synchronising Cache...
15:07:43 Info Synchronising Disc 0
15:07:47 Info Synchronising Disc 65536
15:07:48 Info Closing Track...
15:07:48 Info Finalising Disc...
15:07:58 Info Unlock media
15:08:02 Info Operation Successfully Completed! - Duration: 00:22:03
15:08:02 Info Unlock device
15:08:02 Info Close device


dvdfab_process.log:


19:02:18 Conversion: one pass
19:02:18 DXVA GPU acceleration for video decoding enabled

20:49:06 Burn DVD folder (C:/Users/John_I7/Documents/DVDFab9/Temp/The Host/) started
20:49:07 Failed to burn due to oversized source files.
20:53:13 Burn DVD folder (C:/Users/John_I7/Documents/DVDFab9/Temp/The Host/) started
20:53:14 Failed to burn due to oversized source files.
20:53:20 Task_1 failed! Error=405

[glenns]

Ok lets start here your blu ray drives firmware is 2 versions out of date your using the 1.04 firmware and should be using 2.03 firmware.
Please update here..
New Firmware often lets you use different brands of disks,fixes bugs and makes minor improvements making blu ray disks play better as keys are updated etc.

Second the logs you sent were from different disks so I can't tell everything so you can delete the internal log files logs and the Fab burn file logs and start over so only one disk is done at a time.

Post the logs for the disk you have trouble with and both logs sent for each disk they are dated and name labeled.
Here's what I did get out of the 3 different logs you posted.

Wolverine compressed to 25 gigs and went fine.
Jobs movie burned to disk ok.
The host reported a oversize problem this means the data was to big for the disk you used so you changed Fab settings to the burner or Fab compressed the disk to large or the disk in the drive was to small for the file.I need the internal log for this movie to tell what's going on here.

On your disks burn speed use 1/2 disks rated speed so if their 8x disks burn at 4x speed.
Are you using Fab to burn the disks is this where the pop ups come from as I never seen this happen before using the Fab burner.?

[sealion]

Yes I am using the Fab burner.
Since I have only one BR DVD R/W as soon as the rip finishes on the disk copy I am notified to insert the target disk. As soon as the disk is recognized the pop up asks for the burn speed. As soon as I reply to the pop up or it times out DVDFab starts the burn.

I will try the driver and let you know of the results.

Thanks

[sealion]

Well, I tried to update the driver and this is the error I got.

No match drive detected!
This utility is only for Optiarc BD RW BD-5300S drives.

Detected drives:
1-1-0-0 E:HL-DT-STDVD+-RW GH50N B104
2-0-0-0 H:WD Virtual CD 1111 2018
2-2-0-0 F:Optiarc BD RW BD-5300S 1.04

funny it detects it but say I don't have it.

[sealion]

I was able to update to version 1.06 which has the same date of release as the 2.03. I guess you have to be a version 2 to update to a 2.03.

[glenns]

The new firmware is a full year newer than what you were using.

Sometimes they have different firmware for the same drive one for OME drives and the other for non OEM drives.

The firmware search resulted in a exact match for your drive.

[martythebrit]

There are two models of the BD-5300S, as you can see here;

http://www.sony-optiarc.us/en/suppor...rayseries.html

[martythebrit]

I would create an ISO first, mount that and make sure it plays okay.

I would also use ImgBurn to burn the ISO. ImgBurn also has a test mode you can use first to see what happens.