Announcement

Collapse
No announcement yet.

Now You See Me fails to copy

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    The problem is normally seen if the media is defective or not working well with the DVD burner. It could also be a media type which is not supported by the burner.

    Slow the burn speed down to 4x and retry also set img burn with the write settings in screen shot to adjust laser power to each disk in the drive sometimes this also will help.Last resort slow burn speed to 2x.If none of these help it's the disks try a different brand.
    Attached Files
    Last edited by glenns; 01-23-2014, 07:09 PM.

    Comment


      #17
      There was a Pioneer 206D burner in that computer before it stopped burning the high addresses of 25GB media. The Pioneer 205D that is in another computer has no problems with the 50GB media. One would think that the Pioneer 209D that replaced the 206D would have no issue with the 50GB media, that both the 205D and 206D would burn.

      I had copied the ISO to the other computer and was going to burn it on the 205D, but at the same time it was being copied, I decided to try an experiment and that was to use the ISO as the source in DVDFab9, instead of the physical media. When it got past the point of previous errors, I decided not to waste the expensive 50GB media on an experiment and let the DVDFab9 finish the copy. It did.

      I then started a 25GB copy using the just complete 50GB copy. But it failed 36% into the task with a 401 error. Here are the logs:

      Code:
      dvdfab_internal.log
      
      
      DVDFab 9.1.2.5 (2014/01/23  16:38:25)
      
       0m 00.42s: App info: 2014-1-22
       0m 00.42s: App info: 9.1.2.5 9125 Official
       0m 00.42s: App info: client type 2.
       0m 00.43s: Fabplay load: preload successful.
       0m 00.48s: Fabplay load: Load successful.
       0m 00.48s: Init process: Transfer settings successful.
       0m 00.48s: info: fabcheck logpath= C:/Documents and Settings/Vidiot/My Documents/DVDFab9/Log/
       0m 00.57s: fab_check_gpu is running ...
       0m 01.56s: fab_check_gpu run successful 
       0m 01.56s: info: recommand= 0, Shrink support= 1, enable= 0, cuda_cap= 0 , cpu_count= 4
       0m 01.56s: GPU check: GPUAccelerate-12347
       0m 01.56s: GPU check: GPUAccelerate setting-0, 8248
       0m 01.56s: GPU check: CUDA cap-0
       0m 01.56s: GPU check: Support coreavc decode-0
       0m 01.56s: GPU check: Lighting shrink status-1, 0
       0m 01.56s: GPU check: Graphics info: NVIDIA GeForce GT 240 : 4.20 : 1.2
       0m 01.56s: Init process: Load config successful.
       0m 01.56s: Init process: Windows os type is 9.
       0m 01.56s: Init process: command line in is 
       0m 01.82s: Reg check: Parse string: ( 91:8260762964 )( 20:8260762964 )( 21:8260762964 )( 22:8260762964 )( 61:0 )( OV:9125 )( BV:9123 )( S:6d7493dd8a5a4f7af94aa931f975c3cf )
       0m 01.82s: Reg check: Option check status-Local
       0m 01.82s: Reg check: ( HD Decrypter:1:0 )-( DVD to DVD (Gold):1:0 )-( DVD to DVD:1:0 )-( DVD to Mobile:1:0 )-( Blu-ray to Blu-ray:1:1 )-( Blu-ray to Mobile:1:1 )-( File to Mobile:1:0 )-( Blu-ray to DVD:1:0 )-( File to DVD:0:0 )-( File to Blu-ray:1:0 )-( File Mover:1:0 )-( Blu-ray to 3D:1:1 )-( 2D to 3D:1:0 )-( Blu-ray Decrypt:1:0 )-( DVD Decrypt:1:0 )-
       0m 01.82s: App info: language type ENU.
       0m 01.82s: Reg check: Start get sys number.
       0m 01.82s: Reg check: Serial number is: 6c-62-6d-3d-05-61
       0m 01.82s: Reg check: Connect type is: 0
       0m 02.31s: Init process: Init GPU settings successful.
       0m 02.76s: Init preview: Begin init preview play engine.
       0m 02.76s: Init preview: Init DirectShow engine successful.
       0m 03.54s: Burn engine: start init.
       0m 03.70s: Burn engine: engine type-0.
       0m 03.70s: Burn engine: writer count 1.
       0m 03.70s: Burn engine: 0- D:\ [PIONEER BD-RW   BDR-209D 1.10 (Ide)].
       0m 03.70s: Burn engine: end init.
       0m 04.78s: Init process: Init setting page successful.
       0m 05.17s: Profile Manager :: End Load Profile 
       0m 05.28s: UI manager: switch to Copy mode.
       0m 05.73s: Init process: init main ui successful.
       0m 06.07s: Init process: show main ui successful.
       0m 06.07s: DriveX msg: Init driveX D with I/O mode: 0
       0m 14.25s: opening drive D
       0m 14.26s: opened i/o
       0m 15.46s: Reg check: Times of connecting error is: 0
       0m 15.46s: Reg check: Parse string: ( S:d7b37ff011ba4b58c6354ce83e3b23fb
       0m 15.46s: Reg check: Option check status-NewWork
       0m 27.60s: Source manager: drag file F:/DVDFab/FullDisc/NOW_YOU_SEE_ME
       0m 27.60s: set folder F:/DVDFab/FullDisc/NOW_YOU_SEE_ME/BDMV/ with type 2
       0m 27.60s: opening folder F:/DVDFab/FullDisc/NOW_YOU_SEE_ME/BDMV/
       0m 27.60s: Source manager: add source id 0.
       0m 27.60s: Open blu-ray disc expired time: 22311011
       0m 27.81s: got bdmv
       0m 41.10s: movie name: now you see me||now_you_see_me
       1m 09.79s: got extended bdinfo
       1m 09.79s: Source manager: open successful.
       1m 10.17s: Work manager: create BD fulldisc work 0 with source 0 and uiinfo 0.
       1m 17.32s: UILog:OnMsgToolbar_Start
       1m 17.32s: UILog:Msg Start : ready start
       1m 17.32s: UILog:Msg Start : start test run work
       1m 17.32s: UILog:right button to null, work falg = -1
       1m 17.32s: UILog:Msg Start : run work
       1m 17.32s: UILog:Run current Work.
       1m 17.79s: UILog:Begin work copy or converter.
       1m 21.39s: UILog:start running at thread.
       1m 21.39s: UILog:return flag at start running at thread ok.
       1m 21.53s: BD FullDisc watermark flag: 0
       1m 21.53s: UILog:MsgWork:WorkStatus_Start
       2m 46.78s: Blu-ray Copy: Full Disc
       2m 46.78s: Source: F:/DVDFab/FullDisc/NOW_YOU_SEE_ME/BDMV/
       2m 46.78s: SourceSize: 74593 MB
       2m 46.78s: RemoveHDAudio: 0
       2m 46.78s: OutputSize: 23000 MB
       2m 46.78s: OtherSize (CLPI, JAR, etc.): 27188 MB
       2m 46.78s: OutputDisc: BDMV
       2m 46.78s: OutputTarget: BD25
       2m 46.78s: OutputVideo: 1080p/i
       8m 38.37s: Output group estimatedblock size
       8m 38.39s: EstimatedBlocks: 44, EstimatedMainVideoBlocks: 0
       8m 38.39s: EstimatedBlocks: 3108, EstimatedMainVideoBlocks: 3063
       8m 38.39s: EstimatedBlocks: 10956, EstimatedMainVideoBlocks: 10916
       8m 38.39s: EstimatedBlocks: 31692, EstimatedMainVideoBlocks: 24912
       8m 38.39s: EstimatedBlocks: 32253, EstimatedMainVideoBlocks: 24230
       8m 38.39s: EstimatedBlocks: 62100, EstimatedMainVideoBlocks: 60365
       8m 38.39s: EstimatedBlocks: 69768, EstimatedMainVideoBlocks: 67812
       8m 38.39s: EstimatedBlocks: 129537, EstimatedMainVideoBlocks: 127464
       8m 38.39s: EstimatedBlocks: 170277, EstimatedMainVideoBlocks: 167551
       8m 38.39s: EstimatedBlocks: 328398, EstimatedMainVideoBlocks: 236745
       8m 38.39s: EstimatedBlocks: 481815, EstimatedMainVideoBlocks: 474104
       8m 38.39s: EstimatedBlocks: 537006, EstimatedMainVideoBlocks: 492727
       8m 38.39s: EstimatedBlocks: 694170, EstimatedMainVideoBlocks: 680879
       8m 38.39s: EstimatedBlocks: 1093170, EstimatedMainVideoBlocks: 1075676
       8m 38.39s: EstimatedBlocks: 2290455, EstimatedMainVideoBlocks: 2198488
       8m 38.39s: EstimatedBlocks: 3563679, EstimatedMainVideoBlocks: 2675525
       8m 38.39s: EstimatedBlocks: 14772678, EstimatedMainVideoBlocks: 11000003
       8m 38.39s: to estimate the size of the group, index:0
       8m 38.39s: RealOutputBlocks: 0, EstimatedBlocksCanNotBeCompressed: 4950646
       8m 38.39s: output blocks 11658240 uncompressable blocks 18871252
       8m 39.39s: UILog:MsgWork:current work finish : 2
       8m 39.39s: UILog:Run Work to end.
      11m 57.92s: Exit process: stop running.
      Code:
      dvdfab_process.log
      16:39:47
      Analyzing started
      16:41:12
      Analyzing completed successfully
      16:41:12
      Copy process started
      16:47:03
      Task_1 failed! Error=401
      Code:
      fabcheck_internal.log
      22:38:26:609 info: main: DVDFab - Fabcheck 1,0,2,5 - Thu Jan 23 16:38:26 2014
      
      22:38:26:640 info: GetVideoCardInfoEx:  - NVIDIA GeForce GT 240
      22:38:26:859 info: GetVideoCardInfoEx:  - 4.20 - 1.2
      22:38:26:984 info: gpuGetMaxGflopsGLDeviceIdDRV: device_count - 1 - cuda_api_version = 4020 -
      22:38:26:984 info: gpuGetMaxGflopsGLDeviceIdDRV: bTCC - 0 - computeMode = 0 -
      22:38:26:984 info: gpuGetMaxGflopsGLDeviceIdDRV: major = 1, minor = 2, clockRate = 1340000
      22:38:26:984 info: gpuGetMaxGflopsGLDeviceIdDRV: deviceName - GeForce GT 240 - benchmark  divided by 10000  = 12864 -
      22:38:27:000 info: DetectVideoCard_CUDA: bestCudaDetectInfo 1,0,12864,1,2,GeForce GT 240
      22:38:27:000 info: fab_check::check_cuda: cudaStatus = 0 , modeType = 56 , devCap = 0
      22:38:27:000 info: fab_check::check_cuda: AcquireWriteBlock OK.
      22:38:27:000 info: main: end

      Comment


        #18
        401 error=Video quality is unreachable:
        I believe this to be newer type copy protection staff will have to look at this and see.Try the iso in version 8 see if it's the same.

        2m 46.78s: SourceSize: 74593 MB
        2m 46.78s: RemoveHDAudio: 0
        2m 46.78s: OutputSize: 23000 MB
        2m 46.78s: OtherSize (CLPI, JAR, etc.): 27188 MB
        Last edited by glenns; 01-24-2014, 12:17 AM.

        Comment


          #19
          Originally posted by glenns View Post
          Try the iso in version 8 see if it's the same.
          8.2.2.9 has the same error when it failed.

          Comment

          Working...
          X