Unsuccessful 1st burn

[stinkfinger]

Hey guys, I just got the trial version yesterday. Tried to back up Casino Royale to BD9 as a test run to see if the program will work for me. I have a P4 2.8hz processor and 1.5gb of Ram. Burner is a LG BH10LS30. Its a SATA drive but I'm running it through a IDE through an adapter. It coded fine but the burning only makes it 1-2 percent before failing with a error=122 task2 failed. Logs are attached.

[stinkfinger]

Saw the Error 122 means "Write failed at the beginning of the media (often a media that is poorly supported by the drive)" I was using Verbatim 8x DVD+R DL.

[stinkfinger]

Here's another log. This didn't show up till after I exited the program.

2010-04-25 07:12:27 ---- ******************** Log session stop 25-Apr 07:12:27.167 PID 2512********************
2010-04-25 07:05:57 Info Current Drive selected : 1:0:0 - HL-DT-ST BD-RE BH10LS30 1.00 [D] (Ide)
2010-04-25 07:05:57 Info Using Advanced SPTI interface
2010-04-25 07:05:57 Info System default language : English (United States)
2010-04-25 07:05:57 Info User default language : English (United States)
2010-04-25 07:05:57 Info DLL Version : 4.0.7.466
2010-04-25 07:05:57 Info DLL : C:\Program Files\DVDFab 7\vso_hwe.dll
2010-04-25 07:05:57 Info Version : 7, 0, 4, 0
2010-04-25 07:05:57 Info ExeName : C:\Program Files\DVDFab 7\DVDFab.exe
2010-04-25 07:05:57 Info OS : Microsoft Windows XP Home Edition (Build 2600: Service Pack 3)
2010-04-25 07:05:57 ---- ******************** Log session start 25-Apr 07:05:57.432 PID 2512********************


2010-04-25 07:05:21 ---- ******************** Log session stop 25-Apr 07:05:21.182 PID 3200********************
2010-04-25 06:49:46 Info Disc ejected by user while parsing.
2010-04-25 06:49:42 Info Parsing disc ...
2010-04-25 06:22:19 Error WRITE FAILED: Can't find write strategy at sector 74000
2010-04-25 06:22:12 Error Write error at 73984 (16) - Code 06 29 00 [Unit attention, Power On or Bus device reset occured]
2010-04-25 06:19:06 Info Lead-in burning time (mS) 117
2010-04-25 06:19:06 Info Write started 4132544 sectors to write
2010-04-25 06:19:06 Info Init success: DVD+R Dual Layer
2010-04-25 06:19:06 Info Init DVD+R Dual Layer: Layer change set to LBA 2066288 (3.94 Gb.)
2010-04-25 06:18:35 Info Writing speed requested x8.0, effective x8.0
2010-04-25 06:18:35 Info Available write speed: 8x ,4x
2010-04-25 06:18:35 Info Media ID: MKM-003-00
2010-04-25 06:18:35 Info Media type: Dual Layer DVD+R
2010-04-25 06:18:35 Info DMA Mode
2010-04-25 06:18:34 Info Scanned files #9, folder #7 - total size 8461983240 b. (7.88 Gb.)
2010-04-25 06:18:34 Info Inserted media type : DL DVD+R
2010-04-25 06:18:34 Info Write started
2010-04-25 06:18:33 Info Writable disc DL DVD+R inserted. Ready to write
2010-04-25 06:18:20 Info Parsing disc ...
2010-04-25 05:38:22 Error WRITE FAILED: Can't find write strategy at sector 47904
2010-04-25 05:38:16 Error Write error at 47888 (16) - Code 06 29 00 [Unit attention, Power On or Bus device reset occured]
2010-04-25 05:35:18 Info Lead-in burning time (mS) 128
2010-04-25 05:35:17 Info Write started 4132544 sectors to write
2010-04-25 05:35:17 Info Init success: DVD+R Dual Layer
2010-04-25 05:35:17 Info Init DVD+R Dual Layer: Layer change set to LBA 2066288 (3.94 Gb.)
2010-04-25 05:34:46 Info Writing speed requested x8.0, effective x8.0
2010-04-25 05:34:46 Info Available write speed: 8x ,4x
2010-04-25 05:34:46 Info Media ID: MKM-003-00
2010-04-25 05:34:46 Info Media type: Dual Layer DVD+R
2010-04-25 05:34:45 Info DMA Mode
2010-04-25 05:34:45 Info Scanned files #9, folder #7 - total size 8461983240 b. (7.88 Gb.)
2010-04-25 05:34:45 Info Inserted media type : DL DVD+R
2010-04-25 05:34:44 Info Write started
2010-04-25 05:34:43 Info Writable disc DL DVD+R inserted. Ready to write
2010-04-25 05:34:30 Info Parsing disc ...
2010-04-25 05:34:00 Info Disc ejected by user.
2010-04-25 01:04:16 Info Disc (BD-ROM) not emtpy.
2010-04-25 01:04:05 Info Parsing disc ...
2010-04-25 01:03:58 Info Disc ejected by user while parsing.
2010-04-25 01:03:57 Info Disc ejected by user.
2010-04-24 06:11:59 Info Disc (BD-ROM) not emtpy.
2010-04-24 06:11:57 Info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVDRAM, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R, Blu Ray-R Seq., Blu Ray-R Rnd., Blu Ray-RE
2010-04-24 06:11:57 Info Drive has Serial ATA physical interface
2010-04-24 06:11:57 Info New Drive selected : 1:0:0 - HL-DT-ST BD-RE BH10LS30 1.00 [D] (Ide)
2010-04-24 06:09:27 Info Current Drive selected : 1:0:0 - HL-DT-ST BD-RE BH10LS30 1.00 [D] (Ide)
2010-04-24 06:09:27 Info Using Advanced SPTI interface
2010-04-24 06:09:27 Info System default language : English (United States)
2010-04-24 06:09:27 Info User default language : English (United States)
2010-04-24 06:09:27 Info DLL Version : 4.0.7.466
2010-04-24 06:09:27 Info DLL : C:\Program Files\DVDFab 7\vso_hwe.dll
2010-04-24 06:09:27 Info Version : 7, 0, 4, 0
2010-04-24 06:09:27 Info ExeName : C:\Program Files\DVDFab 7\DVDFab.exe
2010-04-24 06:09:27 Info OS : Microsoft Windows XP Home Edition (Build 2600: Service Pack 3)
2010-04-24 06:09:27 ---- ******************** Log session start 24-Apr 06:09:

[IPopov50]

When last time you check for new firmware. Please update firmware for your drive

Saw the Error 122 means "Write failed at the beginning of the media (often a media that is poorly supported by the drive)" I was using Verbatim 8x DVD+R DL.

[stinkfinger]

Thanks for reply. I just used the Burner for the first time. I'll check the firmware though. Also I checked the VSO forum and saw someone else had the similar
"Unit attention, Power On or Bus device reset occured ERROR" they said to check my power supply or cables.

[IPopov50]

Also I checked the VSO forum and saw someone else had the similar
"Unit attention, Power On or Bus device reset occured ERROR" they said to check my power supply or cables.

Oh!!! VSO forum!!!! OK, you should see this and do what it said:

http://forum.dvdfab.com/showthread.php?t=12

Install ImgBurn and pair them up with DVDFab
Let us know how it goes.

[stinkfinger]

Tried IMG to burn it. Made it 36% through. Had 8 retrys by the time it got to 36% and stopped working. Log in IMG said bogus device. Guessing I'm having problems because of the way my Burner is set up by using a sata to ide adapter(my computer is older and doesn't have sata). I guess I'll get a sata to usb adapter and try that. Thanks for the help!