Men In Black Blu-Ray Full-Disk Copy Problems

[Williamcl]

Hi everyone. I've been trying to copy my blu-ray movie "Men In Black" using the full disk method, and have been getting a failed notice every time. The error is #102. I have tried it several times with different options with the same results. The original disk works perfectly and is brand new.

I've tried it with pathplayer disabled and enabled, and also with "remove HD audio" checked and unchecked. I'm trying to copy full disk to 50GB.

Here's the logs:

20:42:50: Analyzing started
20:42:50: Analyzing completed successfully
20:42:50: Copy process started
22:12:00: Copy 00253.m2ts failed
22:12:01: Task_1 failed! Error=102

DVDFab 8.0.4.7 (2010/11/16 20:38:55)

0m 01.71s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 file2mobile 1 filemover 1
1m 18.26s: detected blu-ray
1m 18.26s: drive D
1m 18.26s: blu-ray type 1
1m 18.26s: volume label MEN_IN_BLACK
1m 22.72s: root 8CA80DBB55535B08_VOLUME_SET_ID:MEN_IN_BLACK:MEN_IN _BLACK:MEN_IN_BLACK
1m 26.37s: aacs 1 bd+ 0
1m 29.71s: got discinfo
1m 30.02s: got bdmv
1m 30.02s: got agid 3
1m 30.10s: sent host cert chal
1m 30.10s: got drive cert chal
1m 30.18s: got drive key
1m 30.19s: got host key signature
1m 30.19s: verified drive signature
1m 30.19s: verified host signature
1m 30.30s: sent host signature and key point
1m 30.30s: got bus key
1m 30.32s: got volume id
1m 30.32s: got volume id mac
1m 30.34s: volume id is correct
1m 30.34s: got vid
1m 31.01s: blu-ray 567C513109C3237C2C4110D1D03B0EC7BD61A08A
1m 31.66s: D 9A0C4235
1m 31.66s: got vuk
1m 31.68s: got unit key 4
2m 30.22s: got extended bdinfo
3m 56.68s: Blu-ray Copy: Full Disc
3m 56.68s: Source: D:\BDMV\
3m 56.70s: SourceSize: 36012 MB
3m 56.70s: RemoveHDAudio: 0
3m 56.70s: OutputTarget: BD50
3m 56.70s: OutputVideo: 1080p/i
92m 01.81s: unit key not found 253
93m 06.62s: unit key not found 253
93m 06.70s: unit key not found 253

2010-11-16 22:15:51 ---- ******************** Log session stop 16-Nov 22:15:51.179 PID 4288********************
2010-11-16 20:39:03 Info Current Drive selected : 0:0:0 - MATSHITA DVDRWBD UJ-110 1Y00 [D] (Ide)
2010-11-16 20:39:03 Info Using Advanced SPTI interface
2010-11-16 20:39:03 Info System default language : English (United States)
2010-11-16 20:39:03 Info User default language : English (United States)
2010-11-16 20:39:03 Info DLL Version : 4.0.11.473
2010-11-16 20:39:03 Info DLL : C:\Program Files\DVDFab 8\vso_hwe.dll
2010-11-16 20:39:03 Info Version : 8, 0, 4, 7
2010-11-16 20:39:03 Info ExeName : C:\Program Files\DVDFab 8\DVDFab.exe
2010-11-16 20:39:03 Info OS : Microsoft Windows 7 Ultimate (Build 7600)
2010-11-16 20:39:03 ---- ******************** Log session start 16-Nov 20:39:03.071 PID 4288********************

I hope I have included all that I should! Any help would be appreciated.

Bill

[malcolm]

Hi, Williamcl,

Task 1, Error=102 means that there encounters a reading problem during the copying process.

Please use Main movie mode to copy this DVD to your HDD, then play the copied folder on your computer to check if it can play smoothly.

Sincerely Yours
Malcolm Wang

[Williamcl]

Hi, Williamcl,

Task 1, Error=102 means that there encounters a reading problem during the copying process.

Please use Main movie mode to copy this DVD to your HDD, then play the copied folder on your computer to check if it can play smoothly.

Sincerely Yours
Malcolm Wang

I have successfully copied in Main movie mode to my HDD, and then played it from the folder and it worked perfectly, very smooth and no pauses or skips. Now if I can get it to do that in Full Disk mode!

P.S. I also tried clone mode and I had the same problems as before.

Bill

[malcolm]

Hi, Williamcl,

Pease also upload your "DVDFab_burn_vso.log", If you are using Imgburn, it should be "DVDFab_burn_imgburn.log".

Thanks for your patience, we appreciate it very much!


Sincerely Yours
Malcolm Wang

[Williamcl]

Hi, Williamcl,

Pease also upload your "DVDFab_burn_vso.log", If you are using Imgburn, it should be "DVDFab_burn_imgburn.log".

Thanks for your patience, we appreciate it very much!


Sincerely Yours
Malcolm Wang

Here is the burn log for ImgBurn, this was for the successful "Movie Only" mode and not the Full Disk mode, since it never got to Imgburn.

I 00:32:47 ImgBurn Version 2.5.2.0 started!
I 00:32:47 Microsoft Windows 7 Ultimate Edition (6.1, Build 7600)
I 00:32:47 Total Physical Memory: 3,135,532 KB - Available: 1,925,820 KB
W 00:32:47 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.
I 00:32:47 Initialising SPTI...
I 00:32:47 Searching for SCSI / ATAPI devices...
I 00:32:47 -> Drive 1 - Info: MATSHITA DVDRWBD UJ-110 1Y00 (D (ATA)
I 00:32:47 -> Drive 2 - Info: DVDFab Virtual Drive 1.0 (V (SCSI)
I 00:32:47 Found 1 BD-ROM/HD DVD-ROM and 1 BD-ROM/DVD±RW!
I 00:32:48 Operation Started!
I 00:32:48 Building Image Tree...
I 00:32:48 Calculating Totals...
I 00:32:48 Preparing Image...
I 00:32:48 Contents: 9 Files, 15 Folders
I 00:32:48 Content Type: BD Video
I 00:32:48 Data Type: MODE1/2048
I 00:32:49 File System(s): UDF (2.50)
I 00:32:49 Volume Label: MEN_IN_BLACK
I 00:32:49 Size: 20,391,339,124 bytes
I 00:32:49 Sectors: 9,956,714
I 00:32:49 Image Size: 20,392,378,368 bytes
I 00:32:49 Image Sectors: 9,957,216
I 00:32:55 Operation Successfully Completed! - Duration: 00:00:06
I 00:32:55 Operation Started!
I 00:32:55 Image Contents: 9 Files, 15 Folders
I 00:32:55 Image Sectors: 9,957,216 (MODE1/2048)
I 00:32:55 Image Size: 20,392,378,368 bytes
I 00:32:55 Image Volume Identifier: MEN_IN_BLACK
I 00:32:55 Image Volume Set Identifier: 3D7104180097EEEA
I 00:32:55 Image Application Identifier: ImgBurn v2.5.2.0
I 00:32:55 Image Implementation Identifier: ImgBurn
I 00:32:55 Image File System(s): UDF (2.50)
I 00:32:55 Destination File: C:\Users\William\DVDFab\ISO\MEN_IN_BLACK.iso
I 00:32:55 Destination Free Space: 161,725,165,568 Bytes (157,934,732 KB) (154,233 MB) (150 GB)
I 00:32:55 Destination File System: NTFS
I 00:32:55 File Splitting: Auto
I 00:32:55 Writing Image...
I 00:45:45 Operation Successfully Completed! - Duration: 00:12:49
I 00:45:45 Average Write Rate: 25,896 KB/s (5.8x) - Maximum Write Rate: 55,799 KB/s (12.4x)
I 00:45:45 Close Request Acknowledged
I 00:45:45 Closing Down...
I 00:45:45 Shutting down SPTI...
I 00:45:46 ImgBurn closed!

[malcolm]

Hi, Williamcl,

Please install the latest version of DVDFab8.0.5.0 at to register and try again to see the result.

Sincerely Yours
Malcolm Wang

[Williamcl]

Hi, Williamcl,

Please install the latest version of DVDFab8.0.5.0 at to register and try again to see the result.

Sincerely Yours
Malcolm Wang

I have installed the latest version 8.0.5.0 and tried it again, and it still errors out at the same place with the same error. It seems to go to about 99.99% done, and then looks like it tries to copy a few files at the end and that's where it gives the error. Any other settings I should try and change to get a good "full disk" copy? Thanks.

[AGJ]

Well from my understanding Pathplayer has nothing to do with Blu-ray so changing the settings for that is pointless. A read error is usally signs of a dirty/scrathed disc or bad press. Have you inspected the Blu-ray for fingerprints/scratches?

Also you can as well give the trial for DVDFab Passkey a try and have Passkey open the Blu-ray first and then start the DVDFab Blu-ray Copy to see if you can get Full Disc that way. Here link to Passkey for you and it has a 30 day free trial as well

[Williamcl]

Well from my understanding Pathplayer has nothing to do with Blu-ray so changing the settings for that is pointless. A read error is usally signs of a dirty/scrathed disc or bad press. Have you inspected the Blu-ray for fingerprints/scratches?

Also you can as well give the trial for DVDFab Passkey a try and have Passkey open the Blu-ray first and then start the DVDFab Blu-ray Copy to see if you can get Full Disc that way. Here link to Passkey for you and it has a 30 day free trial as well

Success! I was able to do a full disk copy with passkey and dvdfab together. I set dvdfab to ignore read errors and it copied the disk with no problems. Thanks for all the help!

Should the "Ignore errors" be on all the time, or should it normally be set to not ignore?

[AGJ]

No Ignore errors should not be on all the time and glad you got it to work for you. Also can you post the Internal log files from both DVDFab and Passkey for this try that worked? They located in document-dvdfab-log and document-dvdfab Passkey-log