br to dvd voice over

[John165]

ive been a long time user of dvdfab and upgrading to dvdfabbr
Every time i use br to dvd i get a voice over discribing the move
I have tryed every sound option availabe to me and no better

[AGJ]

ive been a long time user of dvdfab and upgrading to dvdfabbr
Every time i use br to dvd i get a voice over discribing the move
I have tryed every sound option availabe to me and no better

Select the DTS Audio

[John165]

No DTS player

I tryed that the move just plays with broken up sound
im not using a dts receiver

[AGJ]

post the log files located in document-dvdfab-log and just the recent tries for the internal log is needed

[captmidnight46]

Worked for me!

Thanks! I had the same problem with the voice over (Commentary ON)when I copied BD to DVD - and there was no way to turn it off on the finished copy.

When I selected DTS, the copy was fine! Although on my laptop in preview mode the sound was broken up - on the finished copy it was fine. Thanks!!!!

[John165]

thanks but

Thanks but that only works if i have dts on my receiver with out it i get no sound at all.

Im trying to find the right log and how to post it

[John165]

ok i think this is the log file

DVDFab 8.0.6.7 (2011/01/03 10:22:51)

0m 00.87s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1


DVDFab 8.0.6.7 (2011/01/03 10:23:44)

0m 00.82s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1
8m 02.30s: detected blu-ray
8m 02.30s: drive F
8m 02.30s: blu-ray type 1
8m 02.30s: volume label DESPICABLE_ME
8m 13.08s: root 8CD2DF1FBFB88560_VOLUME_SET_IDESPICABLE_MEESPICABLE_MEESPICABLE_ME
8m 25.89s: aacs 1 bd+ 0
8m 27.79s: got discinfo
8m 28.34s: got bdmv
8m 28.40s: got agid 0
8m 28.68s: sent host cert chal
8m 28.76s: got drive cert chal
8m 29.32s: got drive key
8m 30.01s: got host key signature
8m 30.01s: verified drive signature
8m 30.01s: verified host signature
8m 30.52s: sent host signature and key point
8m 30.52s: got bus key
8m 30.59s: got volume id
8m 30.59s: got volume id mac
8m 30.59s: volume id is correct
8m 30.59s: got vid
8m 30.70s: blu-ray 0463010739555927EB01DB334404874349388747
8m 31.30s: D A48B4B5B
8m 31.30s: got vuk
8m 31.34s: got unit key 7
17m 17.51s: got extended bdinfo
17m 17.51s: opened blu-ray
19m 48.18s:


------ begin mobile work(1/2) ------


19m 48.18s: create config(5)
19m 48.18s: convert profile(dvd.vob)
19m 48.18s: blu-ray playlist(800) angle(0) chapter(1->21)
19m 48.18s: stream(4113,AVC,1) stream(4355,AC3,1) stream(4608,PGS,4)
19m 48.19s: info: set output video frame_rate(24000/1001)
19m 48.19s: source audio(86019,2,0,48000) is the same as output audio(bitrate 192000), passthrough it
19m 48.22s: processing source(50562.m2ts)
19m 48.22s: using software decoder(h264 multi-thread)
19m 48.22s: subpicture(4608) mode(1)
23m 29.65s: processing source(00010.m2ts)
25m 01.49s: processing source(50563.m2ts)
25m 19.04s: processing source(50545.m2ts)
26m 29.75s: processing source(50564.m2ts)
27m 25.95s: processing source(50546.m2ts)
29m 17.05s: processing source(50565.m2ts)
29m 47.19s: processing source(50547.m2ts)
33m 26.36s: processing source(50566.m2ts)
34m 11.08s: processing source(50548.m2ts)
36m 33.45s: processing source(50567.m2ts)
37m 17.30s: processing source(50549.m2ts)
38m 45.41s: processing source(50568.m2ts)
39m 28.32s: processing source(50550.m2ts)
40m 35.58s: processing source(50569.m2ts)
40m 53.30s: processing source(50551.m2ts)
42m 29.11s: processing source(50570.m2ts)
42m 52.55s: processing source(50552.m2ts)
44m 45.10s: processing source(50571.m2ts)
45m 03.57s: processing source(50553.m2ts)
46m 49.53s: processing source(50572.m2ts)
47m 24.58s: processing source(50554.m2ts)
49m 24.51s: processing source(50573.m2ts)
49m 49.71s: processing source(50555.m2ts)
52m 49.45s: processing source(50574.m2ts)
54m 42.32s: processing source(50556.m2ts)
55m 41.13s: processing source(50575.m2ts)
56m 28.91s: processing source(50557.m2ts)
57m 49.11s: processing source(50576.m2ts)
59m 05.77s: processing source(50558.m2ts)
63m 28.85s: processing source(50577.m2ts)
63m 50.46s: processing source(50559.m2ts)
66m 11.00s: processing source(50578.m2ts)
67m 28.94s: processing source(50560.m2ts)
68m 04.34s: processing source(50579.m2ts)
70m 14.64s: processing source(50561.m2ts)
72m 51.71s: processing source(50580.m2ts)
73m 30.50s: info: set output video frame_rate(24000/1001)
73m 30.50s: source audio(86019,2,0,48000) is the same as output audio(bitrate 192000), passthrough it
73m 32.02s:


------ finish mobile work ------


73m 32.02s:


------ begin mobile work(2/2) ------


73m 32.02s: create config(-1)
73m 32.02s: convert profile(dvd.vob)
75m 57.80s: detected dvd
75m 57.81s: drive F
75m 57.81s: dvd type 0
75m 57.81s: volume label
83m 58.22s:


------ finish mobile work ------


216m 11.45s: detected dvd
216m 11.53s: drive F
216m 11.53s: dvd type 1
216m 11.53s: volume label DESPICABLE_ME

[AGJ]

You may need to hook your DVD player to the TV without using the receiver as the Blu-ray to DVD converter only removes the DTS HD audio and downgrades it to DTS. The 5.1 audio seems to be the commentary on most Blu-ray movies. Must be a pretty old receiver to not be able to have DTS audio as mine can play DTS and it over 10 years old

[John165]

im sorry what i ment to say was that im not using a reviver at all

I dont use the one i have because its so old

[John165]

ac-3/5.1

after burning the movie i get a voice over discribing whats hapening in the movie

i have a standalone dvd player no reciever

my audio opthions in your program are 3 diferent DTS (no sound with stand alone players) ANd 2 AC-3/2 options both are some kind of comintary.

The track i need i believe is ac-3/5.1 but isnt an option

[katiekim]

Hi, John165

Please select "DTS-HD" audio channel to retry.


Thanks.

[AGJ]

Hi, John165

Please select "DTS-HD" audio channel to retry.


Thanks.

Seems John165 dvd player does not decode DTS audio and DVDFab Blu-ray to DVD does not convert DTS HD audio to 5.1 at the moment only DTS HD to DTS from my understanding

[unknownbluray]

I just did a test and my older dvd player doesnt play the DTS HD but my samsung which is basically a year old does. I see the only solution is to update to a newer dvd player or a cheap bluray stand alone. The samsung I have upcoverts nicely and decodes DTS HD.

[W&B]

I still haven't tested this option but I thought I read that Fab would convert the DTS track to AC3 or ACC surround? I may be confusing this with something else...

[katiekim]

Hi, unknownbluray

The output file generated from BD-to-DVD is AC3 audio track.
If your disc cant play, please post more info.

Thanks.