Announcement

Collapse
No announcement yet.

Help...What am I doing Wrong? Burn Failures Galore!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Help...What am I doing Wrong? Burn Failures Galore!

    Hi Folks Good Morning another crappy Snow day in NYC. Ughhh I hate SNOW!!!

    So now to business.....

    No matter what i do after 5 hrs of burning from Blu-Ray to DVD i get "Burn Failed". I ripped the files to the HD, then Clicked on the yellow folder and target to my Plexor DVD drive. Then it asks my to insert media disk, my DVD. Then i insert DVD.Then it runs , i go to bed and i wait 5 hrs. I inserted a DVD and it burned overnight. When i woke up it said "Burn Failed". I'm using TDK DVD-R's. I'm using an Internal Sony Blu-Ray Drive. (Firmware already updated) Another thing that's weird is that when i look at my DVD in the light, i don't see any data burned on to it. The Sony BD-Internal Drive is fine, it reads the movie, but i don't know what im doing wrong. Also tried another Blu-Ray Movie and same results. "Burn Failed" after 5 hrs.
    My Internet connection is fine. And i'm using a paid version. DMA settings etc are all fine.

    Here goes the SPECS:
    My Specs: Built PC, Intel P4 3.2gighz 2gig memory. 160gig Hardrive (Sata), Sony BD-Internal Drive (Sata) , DVDR Plextor Drive (IDE) Internal
    TDK DVD-R blanks

    Here its goes All the LOGS:

    DVD Fab BURN VSO LOG:

    2011-01-22 13:54:14 ---- ******************** Log session stop 22-Jan 13:54:14.000 PID 988********************
    2011-01-22 13:45:24 Error INIT ERROR: The burner is already in use. Try later
    2011-01-22 13:45:24 Error Burner currently used by Nobody.
    2011-01-22 13:45:24 Info Scanned files #9, folder #2 - total size 4508882944 b. (4.20 Gb.)
    2011-01-22 13:45:24 Info Inserted media type : DVD-R
    2011-01-22 13:45:24 Info Write started
    2011-01-22 13:40:04 Info Writable disc DVD-R inserted. Ready to write
    2011-01-22 13:39:16 Info Writable disc DVD-R inserted. Ready to write
    2011-01-22 13:39:14 Info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVD+R, DVD+RW, CD-R, CD-RW
    2011-01-22 13:39:14 Info Drive has IDE-ATAPI physical interface
    2011-01-22 13:39:14 Info New Drive selected : 0:0:0 - PLEXTOR DVDR PX-708A 1.12 [E] (Ide)
    2011-01-22 13:37:44 Info Current Drive selected : 0:0:0 - PLEXTOR DVDR PX-708A 1.12 [E] (Ide)
    2011-01-22 13:37:44 Info Using SPTI interface
    2011-01-22 13:37:44 Info System default language : English (United States)
    2011-01-22 13:37:44 Info User default language : English (United States)
    2011-01-22 13:37:44 Info DLL Version : 4.0.13.476
    2011-01-22 13:37:44 Info DLL : C:\Program Files\DVDFab 8\vso_hwe.dll
    2011-01-22 13:37:44 Info Version : 8, 0, 6, 8
    2011-01-22 13:37:44 Info ExeName : C:\Program Files\DVDFab 8\DVDFab.exe
    2011-01-22 13:37:44 Info OS : Microsoft Windows XP MCE 2005 (Build 2600: Service Pack 2)
    2011-01-22 13:37:44 ---- ******************** Log session start 22-Jan 13:37:44.718 PID 988********************

    DVD FAB INTERNAL LOG:

    DVDFab 8.0.6.8 (2011/01/16 04:06:38)

    0m 01.39s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1
    1m 15.73s: detected blu-ray
    1m 15.73s: drive G
    1m 15.73s: blu-ray type 1
    1m 15.75s: volume label LAST_AIRBENDER
    1m 26.15s: root 8CD1428003AAC445_VOLUME_SET_ID:LAST_AIRBENDER:LAST _AIRBENDER:LAST_AIRBENDER
    1m 28.64s: aacs 1 bd+ 0
    1m 30.82s: got discinfo
    1m 30.98s: got bdmv
    1m 31.00s: got agid 0
    1m 31.06s: sent host cert chal
    1m 31.06s: got drive cert chal
    1m 31.14s: got drive key
    1m 31.42s: got host key signature
    1m 31.42s: verified drive signature
    1m 31.42s: verified host signature
    1m 31.50s: sent host signature and key point
    1m 31.50s: got bus key
    1m 33.67s: got volume id
    1m 33.67s: got volume id mac
    1m 33.67s: volume id is correct
    1m 33.67s: got vid
    1m 34.51s: blu-ray FB5A0A88731F094712C55E0A87883FED3143535F
    1m 34.89s: D B31FBD50
    1m 34.90s: got vuk
    1m 34.90s: got unit key 7
    2m 10.39s: got extended bdinfo
    2m 10.39s: opened blu-ray
    2m 47.67s:


    ------ begin mobile work(1/2) ------


    2m 47.68s: create config(5)
    2m 47.68s: convert profile(dvd.vob)
    2m 47.68s: blu-ray playlist(1) angle(0) chapter(1->11)
    2m 47.68s: stream(4113,AVC,1) stream(4352,DTS-HD MA,1)
    2m 47.70s: info: set output video frame_rate(24000/1001)
    2m 47.73s: processing source(00125.m2ts)
    2m 47.75s: using software decoder(h264 multi-thread)
    338m 09.90s: info: set output video frame_rate(24000/1001)
    338m 12.51s:


    ------ finish mobile work ------


    338m 13.86s:


    ------ begin mobile work(2/2) ------


    338m 13.86s: create config(-1)
    338m 13.86s: convert profile(dvd.vob)
    429m 52.26s: detected dvd
    429m 52.26s: drive E
    429m 52.26s: dvd type 0
    429m 52.26s: volume label
    430m 10.40s:


    ------ finish mobile work ------


    DVD FAB PROCESS LOG:

    13:22:23: Analyzing of DVD started
    13:22:23: Analyzing of DVD completed successfully
    13:22:23: Copy process started
    13:27:49: Copy process completed successfully
    13:27:49: Burn DVD folder (C:\Documents and Settings\JOVANI\My Documents\DVDFab\Temp\MainMovie\LAST_AIRBENDER\) started
    18:21:11: Task_2 failed! Error=111

    #2
    Check your My Documents\DVDFab\Temp and see if the created files are still there, if so d/l VLC media player (it's free) and make sure it will play, if it does try the write data option in DVD Copy module.

    "18:21:11: Task_2 failed! Error=111 HWS_DEVICEBUSY 11 // Device is busy"


    Make sure no other program is running in the background, maybe also make sure autoplay is disabled in the control panel.
    I personally suggest anytime you copy a Bluray title is to 1st copy it with no compression (select BD50 in Bluray Copy) then use that rip as the source for your BD to DVD project.
    It will save some wear and tear on your Bluray drive and reduce any chance for errors that may occur during the copy and compression process.
    I also recommend using ImgBurn as the burn engine instead of the included VSO burn engine. Look in the third party products forum on the main page for d/l links and instructions on how to set it up including the correct write speed.

    Comment


      #3
      Same problem here

      I am suddenly having the same problem burning to DVD from my ripped file on a network drive to my 2003 server. The only thing different is the network drive. But I switched back to my usual drive and the same thing occurred. I have been using dvdfab since version 4 with no problems. Suddenly I'm getting device D in use my nobody and it fails to burn. I am using 8.0.6.8. The logs just say try again later...I wish nobody would leave my disk alone. Task manager shows TMBMSRV.exe is running, not sure what that is. I have installed UNLOCKER as per previous posts but it says that there is no lock on drive D. ...I am at a loss.
      Phil.

      Comment


        #4
        Originally posted by shielphi View Post
        I am suddenly having the same problem burning to DVD from my ripped file on a network drive to my 2003 server. The only thing different is the network drive. But I switched back to my usual drive and the same thing occurred. I have been using dvdfab since version 4 with no problems. Suddenly I'm getting device D in use my nobody and it fails to burn. I am using 8.0.6.8. The logs just say try again later...I wish nobody would leave my disk alone. Task manager shows TMBMSRV.exe is running, not sure what that is. I have installed UNLOCKER as per previous posts but it says that there is no lock on drive D. ...I am at a loss.
        Phil.
        From Google search......
        TMBMSRV.exe or TMBMSRV : Trend Micro Manager Server process. Background service installed by the Trend Micro security products (Antivirus, Internet Security ...

        Comment


          #5
          Fixed error 111

          I used another burn engine (nero) from within dvdfab which was on the dvd write drop down, it worked fine. I'll try ImageBurn as well. VSO burn engine seems to be the problem.
          Phil.

          Comment


            #6
            Thanks

            Thanks W&B I will try at home.

            Comment


              #7
              Burning Errors gone but I get No Video

              Burning Errors are gone. Thanks guys but i don't get Video now when i play the DVD. Just Sound. I did Burn MOVIE ONLY

              Comment

              Working...
              X