DVD Region 1, V8.0.5.6 DVDFab. The copy process stops at 1 to 3 minutes remaining. No error message and I have no log on this one. Tried with and without Passkey, Full disk, Movie only. The DVD plays flawlessly on my player. Anyone else having problems?
-
-
Without logs and or detailed information it is difficult to help.Originally posted by rdrod View Post
Have you cleaned the disk?
Is the disk scratched?
There is nothing special on this move and was not a problem to copy in September when I did it. -
trouble with loser
The disk was cleaned and was pristine with no visible flaws. DVDFab just stopped copy, locked up as it were. Will check and see if the logs are still available.Comment
-
problem with losers
Found the logs after all:
13:54:28: Analyzing of DVD started
13:54:37: Analyzing of DVD completed successfully
13:54:37: Copy process started
14:02:16: Task_1 failed! Error=102()
DVDFab 8.0.5.6 (2010/12/07 18:00:44)
0m 01.29s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1
0m 05.63s: detected dvd
0m 05.63s: drive D
0m 05.63s: dvd type 0
0m 05.63s: volume label
0m 05.77s: detected dvd
0m 05.80s: drive E
0m 05.80s: dvd type 1
0m 05.80s: volume label LOSERS
0m 05.92s: got copyright 1 f6
0m 06.36s: got udf/iso
0m 06.98s: got discinfo
0m 06.98s: pathplayer disabled 0
0m 08.65s: got dvdinfoComment
-
Task_1 failed! Error=102()
This is a read error due to ....
defective disk - scratched disk - dirty disk- dirty lazer in the reader drive.
You have said it is clean and no visible defects so this leaves one of the other two .
Download cd/dvd speed and scan the disk for errors.
Comment
-
Pathplayer needs to be set as Always Enabled for this DVD which would be why you getting the errorOriginally posted by rdrod View PostComment
Comment