Backup Disc of Disney "UP" can't replay correctly

[jinjin_jp]

Backup Disc of Disney "UP" can't replay correctly.
There short part is repeated then paused for a while.

There are 5 problematic points.
The last part of Cell_20, 32, 36, 39 and 50 of PGC_5 of VTS_20.
I examined about these 5 points.
(1) These 5 have common feature which the next cell is multi-angle cell and very short.
When seeing VTS_C_ADT by IfoEdit, I think multi-angle cells are usually divided to alternative cells. But these multi-angle cells are not divided, so only 1 cell of each angle.

VTS overviw
PGC_5
[Cell 20] [V/C Id: 12/ 3] : time: 00:00:16.00 / 30 fps [Pos: 00:05:26.22] ---The last part of this cell can't replay correctly.
[Cell 21] [V/C Id: 13/ 1] (Angle 1): time: 00:00:03.00 / 30 fps [Pos: 00:05:29.22] -----very short multi-angle cell
[Cell 22] [V/C Id: 14/ 1] (Angle 2): time: 00:00:03.00 / 30 fps [Pos: 00:05:29.22] -----very short multi-angle cell
[Cell 23] [V/C Id: 15/ 1] : time: 00:00:20.05 / 30 fps [Pos: 00:05:49.27]
[Cell 24] [V/C Id: 16/ 1] (Angle 1): time: 00:00:06.10 / 30 fps [Pos: 00:05:56.07]
[Cell 25] [V/C Id: 17/ 1] (Angle 2): time: 00:00:06.10 / 30 fps [Pos: 00:05:56.07]
[Cell 26] [V/C Id: 18/ 1] : time: 00:00:14.20 / 30 fps [Pos: 00:06:10.27]

VTS_C_ADT
28. Cell: VOB ID 12
28. Cell: Cell ID 3
28. Cell: Start sector 85981
28. Cell: End sector 89242
29. Cell: VOB ID 13 ---Multi-angle cell;V/C-ID=12/1 is not divided, only 1 cell of each angle.
29. Cell: Cell ID 1
29. Cell: Start sector 89243
29. Cell: End sector 89849
30. Cell: VOB ID 14 ---Multi-angle cell;V/C-ID=13/1 is not divided, only 1 cell of each angle.
30. Cell: Cell ID 1
30. Cell: Start sector 89850
30. Cell: End sector 90456
31. Cell: VOB ID 15
31. Cell: Cell ID 1
31. Cell: Start sector 90457
31. Cell: End sector 96367
32. Cell: VOB ID 16 ---Multi-angle cell;V/C-ID=15/1 is divided to alternative cells.
32. Cell: Cell ID 1
32. Cell: Start sector 96368
32. Cell: End sector 97212
33. Cell: VOB ID 16 ---Multi-angle cell;V/C-ID=15/1 is divided to alternative cells.
33. Cell: Cell ID 1
33. Cell: Start sector 98000
33. Cell: End sector 98977
34. Cell: VOB ID 17 ---Multi-angle cell;V/C-ID=16/1 is divided to alternative cells.
34. Cell: Cell ID 1
34. Cell: Start sector 97213
34. Cell: End sector 97999
35. Cell: VOB ID 17 ---Multi-angle cell;V/C-ID=16/1 is divided to alternative cells.
35. Cell: Cell ID 1
35. Cell: Start sector 98978
35. Cell: End sector 99954
36. Cell: VOB ID 18
36. Cell: Cell ID 1
36. Cell: Start sector 99955
36. Cell: End sector 104187

(2)PGC_3 of VTS_20 has comletely same structure as PGC_5.
But PGC_3 has no problem.
Difference is that PGC_5 replays angle-2, PGC_3 replays angle-1.

I think the problem is related with above (1)&(2).

I'll attatch the Fab's Info Files and IFO files of output which is compressed to 4.7GB.
(Fab's Info Files is restricted over file size , so divided to VIDEO_TS(IFO files) and others.)

By the way, DVD player is Panasonic DMR-BW680.

Regards.

[terry5]

Hi jinjin jp,
please post your internal.log here.
The default location is:
For Win7 C:\Users\User Name\My Documents\DVDFab\Log
or Vista C:\Users\User Name\Documents\DVDFab\Log
or for XP C:\Documents and Settings\User Name\My Documents\DVDFab\Log
Best regards.
terry5

[jinjin_jp]

Hi jinjin jp,
please post your internal.log here.
The default location is:
For Win7 C:\Users\User Name\My Documents\DVDFab\Log
or Vista C:\Users\User Name\Documents\DVDFab\Log
or for XP C:\Documents and Settings\User Name\My Documents\DVDFab\Log
Best regards.
terry5

I'll attatch the file.
It is picked up when backup this DVD.

Regards.

[CBR929]

Hi jinjin_jp
What other steps are you using to compress your movie?
According to your logs your subscription to DVD Copy has expired.
Open Fab click the ? click about, what does it say under the options you have purchased.
CBR929

[jinjin_jp]

Hi jinjin_jp
What other steps are you using to compress your movie?
According to your logs your subscription to DVD Copy has expired.
Open Fab click the ? click about, what does it say under the options you have purchased.
CBR929

I compressed directly by DVDFab.
I thought strange why it can, too. But I don't know the reason.
I assume because it is first time to compress by Fab8-QT.

Regards.

[jinjin_jp]

How about the fix of the problem ?
Is it difficult ? Is it known by author ?
I'm afraid to be ignored because I could compress by Fab though expired.
It is not responsibility of me. I think it is bug of Fab. I experienced it several times. Then I reported to Fengtao directly by PM, and it was fixed.

I hope the problem is recognized and fixed.

Regards.

[fengtao]

Hi jinjin_jp,

I will check this issue asap, thanks for your report.

Best Regards,
Fengtao

[jinjin_jp]

Hi jinjin_jp,

I will check this issue asap, thanks for your report.

Best Regards,
Fengtao

Thanks. I'll wait for good news.


Regards.

[jinjin_jp]

Sorry.
My First post like below was a little incorrect.

There short part is repeated then paused for a while.

Here is correct.
The end of the cell which is short multi-angle cell is repeated and paused for a while.
Then multi-angle cell is not replayed and next cell is replayed.
It is occured only when angle-2 .

Regards.

[jinjin_jp]

I can find the reason of the problem.

I succeeded to create backup by another program.(I can't explain its details because removed).
I compare between output of DVDFab and it.
I found DVDFab modify VOB files in certain case.

When seeing VOB by VobEdit ;
"Adress 006D to 0070" it seems to mean "non-seamless angle 2 relative offset".
DVDFab seems to reset its value to "0".
Backup which have no problem has some value, it is same as difference between start sector of the cell of angle-1 and angle-2.
Each VOBU seems to have it.

By the way about multi-angle cell which are divided to alternative cells in VTS_C_ADT (they have no problem), its value is "0".
Only problematic multiangle cell which are not divided to alternative cells in VTS_C_ADT seems to have some value.

I think above adress of VOB should have above value when multi-angle cell which are not divided to alternative.
But DVDFab seems to reset its value to "0", so problem occurs.

I think it is one of tricks of recently released DVDs.
I hope to be fixed in DVDFab (also DVDFabPasskey if having same feature).

Regards.

[jinjin_jp]

Sorry, I noticed the mistake about the value of "non-seamless angle 2 relative offset".
I is different between the cell of angle-1 and angle-2.
I'll report later.

Regards.

[jinjin_jp]

Sorry, I noticed the mistake about the value of "non-seamless angle 2 relative offset".
I is different between the cell of angle-1 and angle-2.
I'll report later.

Regards.

Here is correct.
In this case, "490"(hex) ="1168" is difference between start sector of the cell of angle-1 and angle-2 when no-compression.

The cell of angle-1
Backup which have no problem
Adress : 0069-006c (non-seamless angle 1 relative offset) ----"80000000"
Adress : 006d-0070 (non-seamless angle 2 relative offset) ----"00000490"
Output of DVDFab
Adress : 0069-006c (non-seamless angle 1 relative offset) ----"80000000"
Adress : 006d-0070 (non-seamless angle 2 relative offset) ----"00000000"

The cell of angle-2
Backup which have no problem
Adress : 0069-006c (non-seamless angle 1 relative offset) ----"80000490"
Adress : 006d-0070 (non-seamless angle 2 relative offset) ----"80000000"
Output of DVDFab
Adress : 0069-006c (non-seamless angle 1 relative offset) ----"80000000"
Adress : 006d-0070 (non-seamless angle 2 relative offset) ----"80000000"

Regards.

[jinjin_jp]

I actually tryed to edit problematic VOB file, burning and replaying.
I could confirmed to fix the problem.

Regards.

[jinjin_jp]

Below of my post #10 was wrong.

By the way about multi-angle cell which are divided to alternative cells in VTS_C_ADT (they have no problem), its value is "0".

It is similar to 'Backup which have no problem' of post #12 and DVDFab doesn't modify it.

Regards.

[jinjin_jp]

I noticed that below of post#12 is little incorrect.

"490"(hex) ="1168" is difference between start sector of the cell of angle-1 and angle-2

I noticed there is the case which the value is different in the same cell.
Here is correct.
"490"(hex) ="1168" is difference between start sector of the vobu of angle-1 and angle-2

Please utilize to fix the program.

Regards.