"X" Cannot be backed up

[jetman4615]

"X" DVD is a 2011 movie. I started with DVD FAB vs 9012 Qt, and the dvd ripping process completed with no problem. I do not use Image Burn, my software for burning is Copy to DVD, and I have always used it throughout my membership with DVD FAB. When I attempt to burn. I immediately get an error window stating "Access violation at address 004F4BAF in module 'copytocd.exe. Read of address 00000000." After two more tries with this version, I switched to vs 8222 Qt with the exact same results. I did clean the disk with mild soap and water, no help aftert another two tries with this version. I also played the original disk from beginning to the end with no problem. I use Sony -R media. I finally moved on to my additional new movie, and backed it up with positive results. Location is Region 1. I am including both versions log entry for some asisstance. Thank you.


DVDFab 9.0.1.2 (2012/12/05 20:01:29)

0m 04.46s: GPUAccelerate: 0
0m 04.46s: CUDA cap: 0
0m 04.50s: Support coreavc decode: 0
0m 04.50s: Graphics info: Radeon X1650 Series : :
0m 04.60s: Qt Translator file load success
0m 05.04s: Start get sys number.
0m 05.04s: Serial number is: 00-11-11-83-d5-4d
0m 05.06s: Reg URL link is:
0m 05.06s: Version is: 9012
0m 05.06s: Product is: 2
0m 05.07s: Connect type is: 0
0m 06.43s: Times of connecting error is: 0
0m 06.43s: Parse string is: 2:1408887471
0m 06.46s: Parse string is: OV:9012
0m 06.48s: Parse string is: BV:9008
0m 06.48s: Parse string is: S:ed944f66008af200f551c619a667e87c
0m 06.54s: End check info.
0m 06.56s: Load config successful.
0m 07.00s: Init profile data driver sucessful.
0m 07.75s: Init GPU settings sucessful.
0m 07.76s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 07.78s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 23.62s: Init burn engine successful.
0m 24.37s: opening drive E
0m 24.42s: opened i/o
0m 24.50s: got media type 4
0m 24.65s: got disc type 10
0m 24.73s: got max lba 1903683
0m 24.84s: type DVD-VIDEO
0m 24.85s: volume label X
0m 24.89s: opening drive F
0m 24.90s: opened i/o
0m 24.92s: got media type 2
0m 30.01s: got disc type 0
0m 30.01s: got max lba 230460
0m 31.15s: opening drive E
0m 31.20s: opened i/o
0m 31.29s: got disc type 10
0m 31.31s: got max lba 1903683
0m 31.40s: got copyright 1 fe
0m 32.01s: got udf/iso
0m 32.85s: got discinfo
0m 32.85s: pathplayer enabled
0m 34.81s: button: vts_1 menu_1 pgc_1 cell_1 sector_225 count_4
0m 37.59s: button: vts_1 menu_1 pgc_3 cell_1 sector_18549 count_14
0m 38.28s: button: vts_1 menu_1 pgc_4 cell_1 sector_18584 count_4
0m 39.25s: got dvdinfo
0m 39.28s: opened dvd


DVDFab 8.2.2.2 (2012/12/06 08:32:50)

0m 05.82s: GPUAccelerate: 0
0m 05.85s: CUDA cap: 0
0m 05.85s: Support coreavc decode: 0
0m 05.85s: Graphics info: Radeon X1650 Series : :
0m 05.87s: Qt Translator file load success
0m 06.53s: Load config successful.
0m 06.54s: Init profile data driver sucessful.
0m 13.64s: Init GPU settings sucessful.
0m 13.64s: option dvd2dvd 1 dvd2mobile 0 bluray2bluray 0 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 0
0m 13.65s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 14.35s: Config ExBar successful.
0m 14.35s: dvd2dvd have 8 elements.
0m 14.79s: dvd2mobile have 32 elements.
0m 14.81s: blu-ray2blu-ray have 4 elements.
0m 14.85s: blu-ray2mobile have 21 elements.
0m 16.10s: blu-ray23d have 7 elements.
0m 16.46s: blu-ray2dvd have 1 elements.
0m 16.53s: file2mobile have 31 elements.
0m 18.35s: file2dvd have 1 elements.
0m 18.42s: file2bluray have 1 elements.
0m 18.95s: Config work ui controls successful.
0m 22.48s: Init burn engine successful.
0m 22.59s: StartNotify successful.
0m 22.59s: opening drive E
0m 22.60s: opened i/o
0m 22.62s: got media type 4
0m 23.09s: got disc type 10
0m 23.10s: got max lba 1903683
0m 23.15s: type DVD-VIDEO
0m 23.15s: volume label X
0m 23.17s: opening drive F

[CBR929]

Hi jetman4615
Can you also post your burn log?
Thanks
CBR929

[jetman4615]

"X" Cannot be backed up

Hi CBR929

Since I do not use ImagBurn, I am not aware of a burn log when using my CopyToDvd software. Can you assist/guide me to the burn log if it exists.

Please be advised as I stated in my post, I immediately receive the error when attempting to burn with my CopyToDvd software. I assume if the burn software did not activate, there would be no log. Thanks

[CBR929]

Hi jetman4615
I misunderstood you, sorry.
I thought you were talking about DVD Copy.
I can not help you with other software,.
I can help you with DVD Fab and also a few other third party programs.
Why do you not use DVD Fab for the whole process?
If you would like to use ImgBurn you will find instructions in the link in my signature on setting it up with Fab.
CBR929

[jetman4615]

"X" Cannot be backed up

HI again CBR929

No problem with the misunderstanding. I guess if you have no answer, the logs I submitted did not reveal any faults. I, also would tend to lean toward my burning software, however, I just finished backing up two other dvd movies, with no problems. Since the logs are not finding any new protection, I can only assume the disk is at fault, even though the movie plays fine. Do you think that could be a possibility?

The reason I have not used ImgBurn, is, I was not sure if it will accept a -RW
disk, as I usually backup on a -RW to be sure I have a good backup, with no freezing or pixel break up, rather then wasting a -R single copy disk.
Thanks for your help

[90312]

Since CBR929 is offline I'll take a stab at it. The fact a movie plays is not remotely related to whether it will backup or not, apples and oranges. I assume you are backing up to the HDD and burning the folder or image with the other software, and if the backup completes successfully the problem is not with DVDFab.

And ImgBurn will write to RW discs just fine I use them occasionally on a dubious backup myself.

[jetman4615]

"X" Cannot be backed up

Hello 90312,

Thanks for your reply. For the record. I do backup to the HDD successfully, and burn with another software. Since I cannot get this dvd to burn, even though the software still works fine with two other dvds since, I am lost. I would like to try IMGBurn to isolate the problem.