Keep getting failed message when using dvdfab copy

[peeky]

Hi,

I have emailed support over 48 hours ago and no response.

Everytime I try to copy my movie on one dvd to another blank dvd (memorex recordable 8x 8.5gb 240min DVD+D DL I get Failed, do I want to try again.

See the attachment - they are my logs.


I have been working on this for days. Please help. Thanks

[CBR929]

Hi peeky
Your drive is in PIO mode, Open Fab Click the Green √ top right > General > make sure Check for DMA Automatically is Checked and also Click the Reset DMA to the right click OK and restart Fab.

I also believe that you may still have problems with this media.
Error your getting is 122
122 HWS_FAILED_CALIBRATING 22 // Write failed at the beginning of the media (often a media that is poorly supported by the drive)
Try lowering your burn speed to 4X, you may have better results using ImgBurn as your burn engine, you will find instructions in the link in my signature on setting it up with Fab.


Remember to set up the AWS in ImgBurn and your burn speed to 4X.
Hope this helps
CBR929

[peeky]

Hi CBR929,

First off, thank you for your help!!

What do you mean by:

"media that is poorly supported by the drive"

I have never had issues with either of my dvd drives so I am not sure what you mean.

Thanks,
Peeky

[peeky]

Also, when I go here to download imgburn there are so many links!

What linke specifically on this page am I downloading:

http://www.imgburn.com/index.php?act=download

Thanks,
Peeky

[peeky]

I first tried the fix you told me to do by clicking on green check. I reset, rebooted and tried to copy again.

This time I got task_2failed! Error=106

Is imgburn my only options?

What is error 106?

Thanks

[peeky]

Here is a bit more info:

2013-01-14 13:47:34 ---- ******************** Log session stop 14-Jan 13:47:34.906 PID 5928********************
2013-01-14 13:27:25 Error WRITE FAILED: Can't find write strategy at sector 16
2013-01-14 13:27:24 Error Write error at 0 (16) - Code 05 30 06 [Illegal request, Cannot format medium, Incompatible medium]
2013-01-14 13:27:20 Info Write started 592 sectors to write
2013-01-14 13:27:20 Info Init success: DVD+RW
2013-01-14 13:27:20 Info Writing speed requested x8.0, effective x8.0
2013-01-14 13:27:20 Info Format completed
2013-01-14 13:27:05 Info Format start
2013-01-14 13:27:05 Info Available write speed: 8x ,6x ,4x
2013-01-14 13:27:05 Info Media ID: ÿÿÿÿÿÿÿÿ-ÿÿÿ-FF
2013-01-14 13:27:05 Info Media type: DVD+RW
2013-01-14 13:27:03 Info PIO Mode
2013-01-14 13:27:00 Info Scanned files #8, folder #2 - total size 94208 b. (92.00 Kb.)
2013-01-14 13:27:00 Info Inserted media type : DVD+RW
2013-01-14 13:27:00 Info Write started
2013-01-14 13:26:53 Info Writable disc DVD+RW inserted. Ready to write
2013-01-14 13:26:51 Info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R
2013-01-14 13:26:50 Info Drive has Serial ATA physical interface
2013-01-14 13:26:50 Info New Drive selected : 0:2:0 - TSSTcorp DVD+-RW TS-H653B D200 [F] (Ide)
2013-01-14 13:26:30 Info Current Drive selected : 0:2:0 - TSSTcorp DVD+-RW TS-H653B D200 [F] (Ide)
2013-01-14 13:26:30 Info Using Advanced SPTI interface
2013-01-14 13:26:30 Info System default language : English (United States)
2013-01-14 13:26:30 Info User default language : English (United States)
2013-01-14 13:26:30 Info DLL Version : 4.0.21.489
2013-01-14 13:26:30 Info DLL : C:\Program Files (x86)\DVD Clone\DVDFab 8 Qt\vso_hwe.dll
2013-01-14 13:26:30 Info Version : 8, 2, 2, 6
2013-01-14 13:26:30 Info ExeName : C:\Program Files (x86)\DVD Clone\DVDFab 8 Qt\DVDFab.exe
2013-01-14 13:26:30 Info OS : Microsoft Windows 7 Ultimate (Build 7601: Service Pack 1)
2013-01-14 13:26:30 ---- ******************** Log session start 14-Jan 13:26:30.228 PID 5928********************

[CBR929]

Hi peeky
It is not your drive, but the discs that your using.
I only use quality media "Verbatim discs" for my burns and never have an issue.

You would use this download link Mirror 7 - Provided by ImgBurn
106 HWS_BADMEDIASTATUS 6 // Media is not ready to be written

Was this file that your trying to burn created by DVD Fab?

Your drive also has a firmware update, but we will not focus on that now.

Try installing ImgBurn and setting up AWS in it, just take it slow and follow the directions and post back.
Hope this helps
CBR929

[peeky]

which verbatim discs?

Hi,

Which discs do you use?

http://www.amazon.com/s/?ie=UTF8&keywords=verbatim+discs&tag=googhydr-20&index=aps&hvadid=3854682921&hvpos=1t1&hvexid=&hvnetw=g&hvrand=807964663938925317&hvpone=&hvptwo=&hvqmt=b&ref=pd_sl_32dsacsjjn_b

Thanks

[peeky]

Hi CBR929, thanks again for trying to help me

Okay, I tried image burn.

I got the message "This disc is copy protected!"

Copyright Protection System Type: CSS/CPPM
Sorry, ImgBurn cannot read copy protected discs.

So I bought DVDfab to be able to copy copy protected dvd and I can't copy it.

So far DVDFab has been a failure.

What do I do now? Can anyone help me?

Thanks

[CBR929]

Hi peeky
For single layer discs you would choose this for +R http://www.amazon.com/Verbatim-97459...verbatim+discs this for -R http://www.amazon.com/Verbatim-97460...verbatim+discs and for DL+R this http://www.amazon.com/Verbatim-96542...verbatim+discs you could also choose these for DL+R http://www.amazon.com/Verbatim-96577...verbatim+discs

You do not have to buy them in the larger spindles as I have shown, but, notice where it says AZO dye on the label.
You will "ALWAYS" buy the ones that have the AZO dye on the package label and "NEVER" the data life discs.

Imgburn will not copy a protected disc, if set up correctly it will burn the disc either by itself or in conjunction with Fab.
Hope this helps
CBR929

[gomerz]

Here is a bit more info:

2013-01-14 13:47:34 ---- ******************** Log session stop 14-Jan 13:47:34.906 PID 5928********************
2013-01-14 13:27:25 Error WRITE FAILED: Can't find write strategy at sector 16
2013-01-14 13:27:24 Error Write error at 0 (16) - Code 05 30 06 [Illegal request, Cannot format medium, Incompatible medium]
2013-01-14 13:27:20 Info Write started 592 sectors to write
2013-01-14 13:27:20 Info Init success: DVD+RW
2013-01-14 13:27:20 Info Writing speed requested x8.0, effective x8.0
2013-01-14 13:27:20 Info Format completed
2013-01-14 13:27:05 Info Format start
2013-01-14 13:27:05 Info Available write speed: 8x ,6x ,4x
2013-01-14 13:27:05 Info Media ID: ÿÿÿÿÿÿÿÿ-ÿÿÿ-FF
2013-01-14 13:27:05 Info Media type: DVD+RW
2013-01-14 13:27:03 Info PIO Mode
2013-01-14 13:27:00 Info Scanned files #8, folder #2 - total size 94208 b. (92.00 Kb.)
2013-01-14 13:27:00 Info Inserted media type : DVD+RW
2013-01-14 13:27:00 Info Write started
2013-01-14 13:26:53 Info Writable disc DVD+RW inserted. Ready to write
2013-01-14 13:26:51 Info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R
2013-01-14 13:26:50 Info Drive has Serial ATA physical interface
2013-01-14 13:26:50 Info New Drive selected : 0:2:0 - TSSTcorp DVD+-RW TS-H653B D200 [F] (Ide)
2013-01-14 13:26:30 Info Current Drive selected : 0:2:0 - TSSTcorp DVD+-RW TS-H653B D200 [F] (Ide)
2013-01-14 13:26:30 Info Using Advanced SPTI interface
2013-01-14 13:26:30 Info System default language : English (United States)
2013-01-14 13:26:30 Info User default language : English (United States)
2013-01-14 13:26:30 Info DLL Version : 4.0.21.489
2013-01-14 13:26:30 Info DLL : C:\Program Files (x86)\DVD Clone\DVDFab 8 Qt\vso_hwe.dll
2013-01-14 13:26:30 Info Version : 8, 2, 2, 6
2013-01-14 13:26:30 Info ExeName : C:\Program Files (x86)\DVD Clone\DVDFab 8 Qt\DVDFab.exe
2013-01-14 13:26:30 Info OS : Microsoft Windows 7 Ultimate (Build 7601: Service Pack 1)
2013-01-14 13:26:30 ---- ******************** Log session start 14-Jan 13:26:30.228 PID 5928********************

Check the post you made. I highlighted what may be the problem. The drive is still in PIO mode.

[Gummigutta]

2013-01-14 13:27:20 Info Write started 592 sectors to write

A very short movie.

[peeky]

Hi Gomerz & CRB929

I did the reset dma, is that where you change the pio mode? Or where do you change the pio mode?

Thanks

[peeky]

Hi CRB929, so when I put disc in to copy image burn is what opens.

So how do I used DVDFab for copying movie and imgburn (I guess) for the buring info onto a blank disk. I am sorry I am so ignorant!!

But what are the steps being that when I put the movie dvd, imgburn is what opens up for the process and than I get IMGburn can't copy protected disc, so I know somehow I need the default to be DVDfab, but how do i tell it to use imgburn.

Thanks for teaching my non tech self!!
Peeky

[peeky]

As I watch the process it goes:

Analyzing of DVD started
Analyzing of DVD completed sucessfully
Copy process started
Copy process completed successfully

At this point: The movie disk has been ejected but DVDfab is still in action, right now it is

Burn DVD folder (C:\Users\Adminstrator\Documents\DVDFab\Temp|FullD isc|name of movie

Shouldn't this be burning to my inserted dvd?

Thanks,
Shari